No starts usually pantalla negra is not y solo aparese flecha del maus

Similar Questions

• Re: Satellite A300-21I trying to start but the screen does not light upward

  I have a laptop Toshiba Satellite A300-21I 15.4-inch around the age of 2 months.
  He walks yesterday and received a message (very short)-initialization failed, see the event log.

  Laptop computer tries to start but the display does not illuminate.
  No prior problems.

  The indices of anyone?
  Stanley

  Hello

  You are able to access the BIOS?
  You see a Toshiba start screen that usually appears at the beginning?

  What happens if you press F8 at the beginning of the boot process?

  Please provide more details!

• Tecra M9 - TPSMain.exe cannot start because CpePerf.dll was not found

  Hi and help,

  searched the Web and found other discussions of the forum with similar questions.
  Tried all suggestions, nothing worked. I'm not very good on the computer but you can find my way. In any case...

  After connection messge pop messages - up in succession, similar to: TPSMain.exe cannot start because CpePerf.dll was not found then: TPSoddctl.exe cannot start because CpuPerf.dll not found

  Computer works very well but Power Saver start is not automatic and can't select it from the Panel... "" Toshiba power saver does not work. "
  so select the power options... "could not start because the CpuPerf.dll is not running.
  Did all the research on the net and followed all the tips... i.e. unistall saving in safe mode, uninstall toshiba common utility can uninstall fatal error 0x7e

  Then download Ccleaner, inspections, uninstall with Ccleaner same fatal error.
  In support of Toshiba and tried to install Power Saver... same problem will not install.

  Thus help help help if possible.
  Computer works well but popping up messages are annoying and I'd love to sleep to extend battery.

  Tried the system restore, even though I doubt that it affects the files... Another problem "cannot complete system restore"... tried this several times and cannot restore the system either... What is happening?

  any help please
  Tim

  Hello

  I think you can solve this problem, recover the laptop.
  But that would mean that the whole HARD disk should be formatted and would be installed everything again, I put t know if this is an option for you

  It turns out that something will not with the Toshiba Power Saver installed and, consequently, the popup message.
  Usually new installation of GST should help. But it was not and I m wondering why

  Maybe this is s question really an OS since system restore help (to the previous state) didn t

  He s strange question right now I can suggest only a new recovery

• My dell optiplex 740 will not start. The screen is black, once it displays the Dell logo. It does not say that the computer is in mode 'sleep'.

  My dell optiplex 740 will not start.  The screen is black, once it displays the Dell logo.  It does not say that the computer is in mode 'sleep'.

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You receive an error message?

  Method 1

  See the articles below and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

  Method 2

  I suggest that you start the computer in the last good known Configuration mode and safe mode, post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Method 3

  If the computer can boot in any mode, then I suggest that you perform the clean boot procedure and check if it helps.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• When I log in the background screen of Windows XP appears, but the icons, start menu and taskbar do not appear. What should I do?

  To start my computer upward as usual and takes me to open a session. I connect and my background appears, however my desktop icons, start menu and taskbar DO NOT appear. I can still access the Task Manager and command prompt, but when I try to use a command, absolutely nothing is happening, leaving this method of system recovery is not possible. What should I do?

  bleedorange1998,
  Thanks for posting with us.  I suggest try to start safe mode and see if it works correctly.  If Yes, then you can start using the "last known good configuration."   If in Safe Mode, you have the same problem, you should run chkdsk /r and sfc/scannow.  Here are the instructions for these suggestions.  Post back with the results.

  This article explains how to start the Windows Advanced Options menu: http://support.microsoft.com/kb/315222

  CHKDSK: http://support.microsoft.com/kb/315265

  SFC: http://support.microsoft.com/kb/310747

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Creed Assassin's for PC 2 - has failed to start because d3dx9_42.dll was not found.

  Just bought Assassins Creed 2 for PC, after installation, application could not start because d3dx9_42.dll was not found. This should have on the game disc or already on my computer. I am running windows vista and x 11 direct. Help, please!

  Try this. found the site of anoter.

  Resolution important note: not download the DLL d3dx9_42.dll individually from any "DLL download site. There are a number of excellent reasons that download dll of these sites is never a good idea.

  Note: If you have already downloaded d3dx9_42.dll from one of these sites to download DLL, remove it from everywhere where put you it and continue with the following steps.

  1. Restart your computer if you have not already done.

     D3dx9_42.dll error could be a stroke of luck and a simple restart could clear up completely.

  2. Install the latest version of Microsoft DirectX. Chances are, the upgrade to the latest version of DirectX will fix the d3dx9_42.dll not found error.

     Note: Microsoft frequently publishes updates of DirectX without updating the version number or letter, so don't forget to install the latest version even if your version is technically identical.

     Note: The same installation of DirectX program works with all versions of Windows including Windows 7, Windows Vista, Windows XP and more. It will replace any missing file from DirectX 11, DirectX 9 or DirectX 10.

  3. Assuming that the latest version of Microsoft DirectX does not correct the d3dx9_42.dll error you receive, you are looking for a DirectX installer on your game or application DVD or CD. Usually, if a game or other program uses DirectX, software developers includes a copy of DirectX on the installation disc.

     Sometimes, but not often, the DirectX version, included on the disc is a better fit for the program than the last version available online.

  4. Uninstall the game or software program and then reinstall it again. Something could have happened to the files in the program work with d3dx9_42.dll and a reinstall might do the trick.
  5. Restore the file since the last software package DirectX d3dx9_42.dll. If the troubleshooting steps above have not worked to resolve your d3dx9_42.dll error, try to extract the d3dx9_42.dll individually from the downloadable package of DirectX.
  6. Update the drivers for your video card. Is it is not the most common way, in certain situations, updating the drivers for the video card in your computer may correct this problem of DirectX.

  MCP. MCDST. LVL 80

• "mwlDaemon.exe - Unable to locate component. Application has failed to start because sysenv.dll was not found. Reinstalling may correct the problem.

  Vista message mwlDaemon.exe error
  At the start of Vista, I get the message "mwlDaemon.exe. - unable to locate component Application has failed to start because sysenv.dll was not found. Reinstalling may correct the problem"Question is how should I do this? Most programs work OK, but I think the problem might be preventing a backup is made.

  Hi Thegardener,

  ·         How long have you been faced with this problem?

  ·         You did changes to the computer before the show?

  Follow the steps below for a possible solution:

  Method 1: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

  Method 2: If the method above is not enough, you can try to uninstall and reinstall the application.

  You can see the article for more information about the uninstall of a program.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Hope this information helps.

• I have two versions of the same book on my iphone and ipad.  I want the same book, so I can study on each device.  I tried to remove the books and start again.  It does not work.  Help.

  I have two versions of the same book on my iphone and ipad, which are not synchronized with the other.  I want the same book on each device, so I can study on one or the other.  I tried to remove the books on my phone, ipad & itunes and start again.  It does not work.  Help.

  Hello david.hogan87,

  Thanks for posting about what is happening. If I understand you correctly, you have a book you want on your iPhone and iPad, but neither is synchronizing correctly to have both.

  Have you checked every device to confirm that the same identifier Apple is signed all three?

  iPhone and iPad: head to settings > iTunes and App Store

  iTunes: on a Mac, it's under account or installed depending on the version of iTunes store.  On a PC, it is also under account, and if you don't see the menu bar, click on the triangle in the upper left corner to view the Bar Menu or CTRL + B on the keyboard.

  If all 3 have the same signed Apple ID, post the version of iOS and iTunes for all three devices here, please.

  Best regards.

• Tecra A5 PTA51E stop start if the power is not connected

  Hello everyone, I have a problem with my Tecra A5 PTA51E.
  The laptop stops the start if the power is not connected (works with batteries). First of all, I see the Windows Logo, but then I have black screen. LEDs and fan are on. I have to restart the laptop 3 - 4 times to get a full boot and see the Windows XP login window.

  I tried to update my bios, but I find the same problem also with the latest version (v2.10) installed.
  I also tried to disable saving energy Toshiba but nothing happened. Battery is charged and don't play no beep alarm.

  Thanks for help.

  Hello

  It is not easy to tell what can be the problem, but I recommend you to set the default BIOS settings. I put t know if this will help because I guess that is not material just a software problem.

  Best way to test it to install the OS by using recovery media.

• I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  Can she be seen by disk utility (and which version of Mac OS X is)

• Windows Live Mail could not be started because msmail.dll could not be loaded. What should I do?

  Start Windows Live Mail

  Windows Live Mail could not be started because msmail.dll could not be loaded.  What should I do?

  Post Windows Live questions in the appropriate forum found here:
  http://windowslivehelp.com/

• Error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem.

  Original title: error explorer.exe, Normaliz.dll is missing please help me about the issue.

  Hello

  I get the error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem"Please help me!

  Well - so much for the expertise of committed Microsoft Support Engineer 'experts', but no answer to what I expected.

  See how it works for you:

  If you see a message like this:

  Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  It is in the case Log:

  Event type: Information
  Event source: Application Popup
  Event category: no
  Event ID: 26
  Description:

  Application popup: Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  Start explorer.exe, but the normaliz.dll file.  If explorer.exe is not able to run, you will not be able to do much with your system until the replacement of normaliz.dll.

  You can click OK for errors and finished up in the Task Manager where you can try to fix it.  The message can keep popping up from time to time, while you're fixing it, so just click OK to close the message.

  If normaliz.dll is missing, you can copy it from a working system to the system afflicted with the same version of XP and Internet Explorer.

  You will get a good copy and put it on a floppy disk, thumb drive etc and copy it to your system plagued by using Manager tasks.

  The normaliz.dll file must be located in the c:\windows\system32 folder and therefore is not a Windows file protected, making the Microsoft Support Engineer 'experts' suggest running sfc/scannow, which is just another one of their prosecution of wild goose that will not work, he'll never work and it will only waste your time (and they don't tell you how to run either - if explorer.exe does not start).

  Then engaged Microsoft Support Engineer 'experts' will offer to you develop a copy of the file from the XP installation CD you probably haven't, but it is also not on your XP installation CD, and you will have the same problem try their suggestions to 'try' to start in any any Mode without failure, so this will not help you.  These "experts" seem to think that the Safe Mode boot or boot will replace magically missing files, but it doesn't.

  You also will be able to properly run a browser on the system afflicted to go on Internet download one.

  There is a large computer security risk in the normaliz.dll from some website download.  The best idea is to get a copy of normaliz.dll from another computer that has the same version of XP and IE and replace it from a USB device (which you can access from the Manager tasks), or using a system that works, you can download one of my SkyDrive.

  You can still use the Task Manager to run the system restore and bring it back, but I've never tried and never use SR in all cases.

  If you have recently done a bunch of Microsoft updates, you may have also gotten IE8 so maybe that something was wrong here although the normaliz.dll is the same for each version.

  When you see the error, you can click beyond it and eventually arrived at your screen background image where you can press CTRL-ALT-DEL to start Task Manager. TM, you can click file, new task, Browse and edit the menu drop-down "Files of type" to all files that you can see all the files in folders.

  Go to c:\windows\system32 to see if normaliz.dll is really missing. If the error appears again while browsing, just click OK to get past it.  The explorer.exe tries to run and cannot until the missing file is replaced.

  If it's the only thing missing, you can get one from a working system of the same type as yours, copy on a Flash DRIVE or a floppy disk and always using TM, to browse, copy and paste it where it should be or you can download one of my SkyDrive.

  TM, you can still access your thumb or any other medium the same disk by navigating, copy, paste, etc very well all work.  You use TM to navigate to your thumb or floppy disk, copy the normaliz.dll good and then paste it in the c:\windows\system32 folder, where it is supposed to be.

  If things get worse, just return to TM and remove the file back where you were in first place and continue troubleshooting.

  Using a system that works, you can also download a copy of the file from my SkyDrive and put it on a floppy or USB thumbdrive and networks diskettes for the distressed system.  Sandalenet means wear you the system afflicted by hand.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called normaliz when the name of the file should really be called normaliz.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

• Error: mmc.exe - Unable to locate component. This application has failed to start because apphelp.dll was not found.

  Original title: this application has failed to start because apphelp.dll was not found.

  A window titled "mmc.exe - Unable to locate component" in the title bar, which includes the message:

  "This application has failed to start because apphelp.dll was not found.  Reinstalling the application may fix this problem. »

  that appears when you access many of the 'administration tools' in the start menu.  e.g. component, computer, event viewer Management Services, etc.

  I'm afraid I accidentally deleted apphelp.dll when cleaning on other files.  I found copies of apphelp.dll in following two tracks.

  AppHelp.dll C:\WINDOWS\$NtServicePackUninstall$ 124KO Extension Application 09/08/2004

  AppHelp.dll C:\WINDOWS\ServicePackFiles\i386 123KO Application Extension 04/13/2008

  I tried Recuva, but he could not find the file.

  How to re - install a such apphelp.dll suggested by the pop - up error message window?

  Thank you

  I thought it would be something that began with "A".

  For low overhead and free, think of Microsoft Security Essentials (MSE).

  MSE and a regularly good scan with the definitions updates using MBAM and SAS (from post above) should keep you in good shape according to your Internet habits.

• This application has failed to start because uncdms.dll was not found. Reinstalling the application may fix this problem. How can I fix it? Kathy

  This application has failed to start because uncdms.dll was not found.  Reinstalling the application may fix this problem.  How can I fix it?  Kathy

  The above explains the problem, my problem is I don't know what it's etymology comes.  Is this windows software, or software from Microsoft or both?  What is the name of the Application?  Help, please!  Thank you, Kathy

  Hi Kathy,

  1 have you made changes to your computer recently?

  2. When you get this error message?

  The uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

  I suggest you to follow the steps and check if it helps.

  Method 1: Uninstall and reinstall Windows Desktop Search

  The uncdms.dll file is installed on your PC when you download the Windows Desktop Search application. Problems with this application's files can cause a missing uncdms.dll of error appears on your system.

  To uninstall the Windows Desktop Search from your computer, you must complete the following two tasks:

  Step 1: Remove Windows Desktop Search from the boot sequence

  To do this, follow the steps below:

  a. click on the start menu, click Run.

  (b) in the Open box, type msconfig and press ENTER.

  c. in the System Configuration Utility dialog box, click the Startup tab.

  d. search and clear the check box for any option that is related to Windows Desktop Search or uncdms.dll.

  e. restart your computer.

  Step 2: Uninstall Windows Desktop Search applications

  To uninstall the Windows Desktop Search using the Add / Remove Programs, perform the following steps:

  a. click the start menu and select Control Panel utility.

  b. double-click the icon Add / Remove programs.

  c. in the Add / Remove Programs, locate and select the Windows Desktop Search.

  d. press the button Delete.

  e. restart your computer.

  Method 2: I suggest do you an online scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• It's on my screen and I don't know how to fix it... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. » __

  I have this message that appears constantly, and the only way to minimize it is to go to Task Manager. Here's what the message says... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. »

  How to re-install the AegisE5.dll?

  I have this message that appears constantly, and the only way to minimize it is to go to Task Manager. Here's what the message says... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. »

  How to re-install the AegisE5.dll?

  AegisE5.dll is linked to a network authentication system.  Because it is almost certainly only used with enterprise networks, you should communicate with your company, IT supports for assistance.

  If your computer does NOT connect to a corporate network:

  • What changes have been made recently to your network hardware/software?
  • You have a home network? Wired or wireless?
  • How is your computer connected to the Internet?