no support for my laptop page

Similar Questions

• Where to find a list of processors that are fully supported for my laptop?

  I need to find a list of processors that are fully supported for my laptop, my laptop is a HP PAVILLION DV7 3090EO, im trying to change my processor for a new and need to know what processor taking care of my laptop.

  Thank you

  Dalatoni

  Hi Dalatoni,

  Looking at the Page 84 of your Service and maintenance Guide, there are only 2 processors compatible with your laptops card motherboard/Bios.

  Kind regards

  DP - K

• New Ati Mobility Catalayst pilot - why no Support for Toshiba laptops

  The new driver ati mobility report, released 2010-05-26, does not support Toshiba laptops. It is said in the release notes:

  The following books are not supported in this version:
  All laptops launched after this version of the driver
  Portable computers compatible switchable graphics card using the Intel chipsets.
  Toshiba laptops (please contact the OEM driver laptop
  supported for these laptops)

  My question is, Toshiba released a update driver display for their laptops, especially P300-281 PSPCCE Windows 7 32/64-bit?

  I was expecting an ati mobility denounce pilot since I bought this laptop.

  Hello

  > Toshiba Will release an update for their laptops display driver, especially P300-281 PSPCCE Windows 7 32/64-bit?

  I think it's a bad place to ask this question.
  This is a user to user forum and we can only speculate if you want you can call and ask the Toshiba hotline for new...

  But the fact is that Toshiba provides drivers updated the own to protect the graphics chips from damage.
  Other manufacturers don t know what why do

  However, I managed to install the graphics driver from ATi and nVidia page on my two Toshiba laptops.
  I did it in the Device Manager. I used the Advanced Setup that allows you to point to the driver files downloaded from the page from ATI or nVidia

  But note; You can use and test 3rd third-party drivers only at you own risk.

• I can't find is no longer supported for my laptop Pavilion dv6813tx on the HP website as before.

  I find is more updated driver support for my laptop Pavilion dv6813tx on the HP website as before. Neither the auto detection could detect my machine.

  Product: Pavilion dv6813tx

  OS: Vista

  Hello

  Here you can find the support page and drivers for your specific model.

• Windows 8 upgrade - support for Toshiba laptops models

  Hi community

  If you want to know if your mobile phone is supported by Toshiba win 8 update, please visit this page:

  + The table below lists all Toshiba models by short numbers that are currently supported for the Windows 8 upgrade program. +

  http://EU.computers.Toshiba-Europe.com/innovation/generic/Windows8-matrix

  _ * Incidentally: * _

  If you are looking for specific * Windows 8 drivers * for your Toshiba laptop, visit the drivers of Windows 8 for the upgrade wizard page:

  http://EU.computers.Toshiba-Europe.com/innovation/windows8_drivers.jsp?service=EU

  Welcome them
  Tom

• Support for Samsung laptop SSD T1

  After the upgrade to Sierra, the operating system does not recognize my existing Samsung Portable SSD T1 (MU-PS1T0B) connected via USB 3. If I unplug, then reconnect the USB cable, OS will detect the initial file, but nothing happens when I click on the SSD.app Portable Samsung

  When I go to the Samsung website, activation avarunning Samsung SSD.app Portable software (which is still in 1.0 version) will turn only nonestop without displaying the normal login screen.

  Any suggestions? Anyone else having similar problems?

  Help!

  Same thing with me. I have tried with a windows virtual machine power unlock the ssd and copy my data on my mac.

  But under the Sierra the disc still will not work.

• 15 - ba006nl and 15-ay008nl: ram taken Max supported for upgrade

  I would like to know the maximum ram supported for two laptop. On the HP page, it is not specified. They are the two 8 GB of ram (ddr3l for 15-ba006nl) and ddr4 for 15-ay008nl but the max ram supported for a future upgrade is not present. Maybe it is only 8 GB and can not be upgraded? Thank you.

  Hello:

  For the 15-ay008nl, Chapter 1, page 6 of the manual of the service provides information to upgrade memory.

  http://h10032.www1.HP.com/CTG/manual/c05087748

  Your laptop is a 6th gen core processor, so the max is 2 x 8 GB.

  For the 15-ba006nl, Chapter 1, pages 2 and 3 of the maintenance manual provides memory upgrade information.

  http://h10032.www1.HP.com/CTG/manual/c05227786

  Your laptop has an AMD A-8 processor, so the max is 2 x 8 GB.

• Pavilion g6-1050-st: no support for my product?

  Hello.

  I tried to configure my laptop so I can use the switchable graphics feature since I was 2 GPU. My Catalyst Control Center UI does not show this feature. I've tried 5 or 6 different guides to solve this problem, but no success. I came to the conclusion that I need to upgrade my GPU of HP website drivers, that I can't find.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-1000-Notebook-PC-series/5046257/model...

  No GPU driver? Why is this and where to find them?

  Next part of my question, I tried upgrading the BIOS with update the link, don't still no dynamic-fixed choice given. I tried to download the older AMD drivers, still no switchable graphics in CCC. What should I do to see this feature?

  Thank you.

  Edit: My (g6 1050st) product is not in this list, given in sticky thread:

  http://support.HP.com/tr-TR/document/c02948560

  So I did not date this driver BIOS, I updated one given in my product page. But I have used graphics switchable back in Windows 7. So what can be my problem?

  Hi there @Onat

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand you are trying to get switchable graphics with your current configuration. I'm happy to help you with this.

  Check the product page, it seems that Windows 8.1 is not among the operating systems supported for this laptop. There are a few pilots of Windows 8, but as you say it's not for graphics cards. As for the BIOS, when it comes to laptops and laptop computers, it is common to lock certain options available on desktop computers, because they can cause serious problems with heat and performance on a laptop. Dynamic mode is one of the people often locked and switchable graphics, fixed - function is controlled by the system, as is the video memory available.

  The lack of a custom driver, your best option may be to go back to Windows 7, use the one for her. What follows is the driver which includes two graphics processors for Windows 7.

  AMD HD graphics driver

  I hope this helps. If you have any other questions let me know.

• Support for Windows 7 to VGN-SZ49

  Where can I find Windows 7 support and drivers for my VGN SZ491N? I waited for a year! My S1/S2 special function buttons do not work. Help, please.

  I went through hell with Sony, trying to get suopport for my VGN-FZ290 in order to upgrade to Windows 7. Their Web site indicates clearly that it is upgraded to Windows 7. I contacted the support team and they asured me it ws possible. After the purchase of the software and install it, I discovered that they had no drivers for the graphics card. All they have done is to try and sell me a service contract, saying that they could fix it if I paid them several hundred dollars.
  I have two Dell laptops much older, I easily upgraded to Windows to Vista. Reference Dell fully supports their customers with Windows 7 drivers.
  After a 3 month wait for a response from Sony they came back and told me too bad we will not offer you any Windows 7 driver support for my laptop. They had even the aodacity to wanted to sell me the original Vista operating system, I had to delete them when I did a clean install they recommend to do during the installation of Windows 7.
  I was a big advocate of Sony before these problems. All my electronics TVs camerias ect. Now I can't say that I always have to pay more for a Sony computer when they abanioned you 1 year out for driver for assistance.
  I'll have to recommend Dell for all computers, if you want the driver software updates. All Sony wants to do is sell you services and new computers and for their support in my view stinks.

• Support for Satellite 5200 801 2 GB SD card

  Is it likely to be a produced pilot to add support for memory 2 GB on the Satellite 5200 801 SD cards, or is a hardware limitation?

  Ian.

  Hello

  I've never seen with 2 GB size SD card. Unfortunately, I put t found any information or documents if this size will be supported by the device.
  However, I found the SD cards supported for your laptop:

  Part number 1.) 256 MB memory SD: PX1118E-1NME
  2.) 512 MB memory SD part number: PX1121E-1NME

  Best regards

  Good bye

• no support for dv6768se

  No update for the dv6000 BIOS

  Careful, HP has turned to deception. I bought thousands of dollars worth of HP products. I recommend the purchase of HP in my official duties as a Director of engineering. However, I was disappointed by the performance and support in all cases. I have two machines where I couldn't write media to recover. The most recent is with my Pavilion dv6000 laptop. It has the problem of restarting which may be related to problems of overheating GPU NVidia. This is known issue and HP must have decided to let go without worrying about the goodwill of its customers.

  The details for the latest incident are:

  Seeking support, I called a number found on the site of HP. I was charged for the support of a partner HP from a foreign land only to make things worse.

  They say that when I called HP they Mobile is unsupported and is obsolete. So, why is me she charged?

  My flag will not re-start. The symptoms started he did a software update from Microsoft. The update restarted my system and suspension system. After a stop forced (pressing the power button for 5 seconds), I had a soft recovery screen. I did a restore and it restarted. It hung again. This time, the indicated recovery screen I couldn't move forward and to contact support.

  I tried to get it back to the factory setting. This has seemed to work until I did the updates and tried to restart the machine. It hung again. I made the diagnosis of HW, but diagnostic tests indicated no problems. Analysis of disk of Vista also no problem.

  Before I looked for support I found that instead of restart, if I made a stop, I could limp thought enough of the upgrade to Windows 7. However, the question remained, and she seemed to be associated with HW. That's when I called HP support.

  First of all, I told them (ITechLine) was associated with HW and I didn't not need remotely diagnose my machine. They insisted so I spent a day watching a tech do the antivirus scans and scan disk. Later, they said they had solved the problem, but the technology that has been doing Diagnostics admitted that the original question seems HW and remains.

  How I got the number of ITechLine from the HP website. May have been my mistake, and a better number could be found on the HP website. The loss of time can be, I think, a concealment deliberate by HP.

  Later, I called enough people at HP (even in a foreign country) to find the HP had decided to abandon the support for my laptop and I couldn't support or portions of their share for this machine. The person said that the technology was obsolete. It is also darkening; Since a SATA drive for this my machine could be found for less than $50 and would have more than twice the capacity. In fact, I could buy a new memory 2 GB SODIMM, a new hard drive and a new battery for less than $90. Phone support charged $149.

  I have a few web searches to find the GPU NVidia overheating problem was probably the cause. Then, I disassembled the laptop to clean the cooling fan. The reboot problem was considerably reduced. I can restart 5 out of 6 times, which leads me to believe that it is the GPU overheating problem.

  However, now I can't use the optical drive to start the Windows 7 support. It does not show in my computer. Also, I can't write recovery media using the internal optical drive. I knew it is the bios, because one of the stages that I found on the web had to reset the cmos to the original. I see that is not the most recent. By going to the HP site for the update of the bios, I find that they no longer have the update and my machine does not get detected by their auto detect process. Forgot it that they did the laptop.

  So, I have a laptop of brilliant almost new look that will not work and is unsupported. It is obsolete, even if the State of the industry has not really progressed for laptops. It is Wi - Fi enabled with a large screen and could run all the latest SW until 5 days ago. It is too light to be a doorstop good, so it is useless. All I can get from HP is denial, disappointment and a dress (with a foreign accent).

  Being an EE, I thought that HP a tester has been great and that HP would be able and honorable. It's the end of an era.

  Someone know where I can get the free bios update? It's not worth spending a lot of money after bad to pay for a service update of the bios.

  It is a forum for users of peer-to-peer support for HP products. HP maintains no official presence in this forum. It is unlikely that HP will respond in an official capacity. Response of an employee of HP represents his own opinion and not that of HP.

  Here are the specifications of your HP Pavilion Entertainment Notebook computer dv6768se. Based on the information contained in the specification, this model is about 5 to 6 years. Years of the computer, this laptop is very certainly obsolete. You can find the update of BIOS, drivers and software for your computer on the HP support site at HP Pavilion dv6768se drivers and downloads. The most recent BIOS listed is;

  Description;
  This package provides an update the system BIOS. The update is installed on models of laptops using a supported Microsoft Windows Operating System. A reboot is required to complete the installation.

  Communicate the details;
  Exit the: 2011-03-30
  File name: sp52477.exe [1/1, 3.09 M]
  Version: F.34
  Compatibility: (MUST BE INSTALLED UNDER)
  Microsoft Windows Vista
  Microsoft Windows Vista (64-bit)

  Fix/enhancement;
  -Fixes a problem where the system stops unexpectedly in response and a warning window 0 x 124 appears when the laptop was turned off abnormally, then restarted.

  Please send Bravo

• Support for SLIC 2.0 on HP G62 a21EZ

  Hello

  I want to ask HP plans to add SLIC 2.0 / 2.1 (for Windows Vista / 7 activation OEM) support for PC laptop hp g62 a21EZ via the BIOS update?

  I guess it's already used since the machine comes with Windows 7. If he had delivered with 2.0, I doubt they would release an update to 2.1.

  Why do you ask?

• Can I use SetFld for GenPrint of page banner fields?

  I have a form of page banner with several fields of variable top to display information specific to the batch it is included with (for the area of publication after manipulation). Currently, I put these values by assigning variables of the same name (as fields) in a DAL script called as my BachBannerBeginScript for this batch. The fields on the page banner form/section have a NOOPFUNC rule, so without that happening assign process during script DAL, they are intrinsically worthless. This has worked well so far.

  Now I have a new banner to a different batch/process page, and its purpose is to be a "synthesis report" of sorts, detailing on the banner page of General information about each document included in this batch. I take information from the batch (bch) file, read in an additional external file and aggregate the data in GVMs (to form a table, essentially) during the BatchBannerBeginScript. The problem I have now is that I have an array of variable size (based on the document time in my batch file), but I know I can't use functions allotted to me in GenData, and so I basically have to predefine as many instances of the section (if I make a report by section line) or field (if I make an article with all instances of the field about it) that I think are possible (max-scenario essentially).

  However, after that I have my article/fields defined, I always use DAL script to populate these fields. I tried to use SetFld to fill, but values do not appear in my output, leading me to believe this rule function does not work in GenPrint. Is there a better way to put all these fields that explicitly assign each instance of a field? I'd rather have a few moments in a loop that takes to a PTC instance and assigns a variable field name than to have hundreds of assign statements where I assign explicitly each possible field.

  Thank you

  Gregg

  Yes you can. In fact, it is not a rare thing to do. You just need to use the script associate banner option to identify the DAL routine to perform to make your mapping. This assumes that you have already enabled support for printing banner page. Say that the lot will have the script is the CLIENT, he would do something like this:

  < customer="">

  TransBannerBeginScript = MyScript.DAL

  I'm reasonably sure that you can declare a global script by using this same option under the < printer=""> group.  That would run on any package recipient who does not otherwise specify a different script.

• Satellite L650-111 - where is the support for the page?

  Hello

  I bought this computer a month ago and I thought that I could check the support page for this laptop for the new updates. I clicked on the link to Toshiba Tempro (support for my PC or something like that) and to opening my browser there was an error saying that my product have not been found. So I typed my serial code in and also tried the automatic recognition of the system, which came with the same error.
  Even on this list 'find your laptop manually' I saw not only my role model, but the entire series (L650) wasn't there. Is this in any way related to the problem that I recently ("Toshiba Service Station has stopped working")?

  Please also explain what to do in this case. I tried to uninstall manually and re-setup of the station but the problem persists.

  Thank you in advance.

  Hey Buddy,

  You should check this page:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Then choose the following options:
  Laptop > Satellite > Satellite L Series > Satellite L650 > PSK1JE

  On this page you can find all the updates for it. :)

  Otherwise I agree with Quad: never touch a running system! ;)

• Still cannot find Vista drivers or support for Qosmio G20-120 page

  I've upgraded to Vista Home Premium and everything works fine except for the Toshiba commom modules and energy savings, and bluetooth. Toshiba USA has implemented support for Toshiba USA computers pages only.

  I tried some of the drivers toshiba USA and got my audio to work. No luck with the others. If anyone knows a place for these drivers please let me know.

  Thanks in advance.

  Hi Francisco

  I just want to say one thing: you are the best and thanks for your topic! ;)