No touch or digitizer after upgrade W10 on Aspire R7

Similar Questions

• WiFi does not work after upgrade W10 on qosmio x 770

  Hello
  I have a Toshiba Qosmio X 770 with windows7 64-bit
  Yesterday I updated to Windows 10
  and reboot I got a blue screen with the error: System thread exception unhandled (athwbx.sys)
  It restarts loop, I managed to locate the file (athwbx.sys) and disable it.
  The PC has restarted, but I don't have a wifi connection.

  Atheros AR9002WB-1NG wireless network adapter
  Driver version: 10.0.0.270

  Thank you for the help

  Please check this thread:
  https://Forum.Toshiba.EU/showthread.php?84234

  He confirmed that Win 10 could pick up the driver update WLan automatic connection of the laptop to the internet using LAN.

  This should fix the WLan driver problem Win 10 running

• After upgrading to W10 1607, I get a tilde in front of some letters when you type in FF and FF only ~ l ~ ike th ~ is

  After upgrading to W10 1607, I get a tilde in front of some letters when you type in FF and FF only ~ l ~ ike th ~ is

  What's with Firefox?

  Start Firefox in Safe Mode {web link} by pressing on the
  (Mac = Options) key and then from Firefox. A small dialog box should appear. Click start in Safe Mode (no refresh).

  Is always the problem?

  Start your computer in safe mode with network. Then launch Firefox. Try safe sites. Is always the problem?

  Start the computer in Mode safe;
  Free online encyclopedia

• Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

  My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

  Help please

  Hi asalamk,

  The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

  You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

• C855 satellite can not boot from battery after upgrading W8-W10 Home >

  Hi all

  I have a problem really strang after upgrade my C855 Satellite of Windows 8 to 10 of windows. After the upgrade, I can't boot my system of battery only. With the adapter, I had no poblem.

  I bought a new battery, but it still had the same problem. Cannot start system battery only.

  The following steps, I was

  • Got the latest Bios Update
  • Used a new battery
  • Do the powerless laptop (detach battery and adapter) and hold the power button for 15-20 seonds. After that return battery and adapter
  • Do seals in my power, parameters of balanced energy vice versa

  Is there anyone who has had the same problem or can advise me?

  Thanks in advance for the help

  Hi Repairlab

  You are not alone. I currently have a C50 Sat with exactly the same problem, with the exception of the upgrade. My problem started before I upgraded to 10. Like you, I can start with the battery and using taking current, but which is rubbish for a laptop.
  I didn't upgrade the bios but the laptop does not recognize when the battery is connected and the bios update tool continues to ask for it (VERY annoying ToshIba if you already read your forums).
  I was trawl through these forums looking for a solution, but there are 0 replies on the vast majority of positions. Not even ToshIba engineers seem to have a presence.

  In any case, did you ever solved the problem, and if so can you please share?

  Thank you.

• HP ENVY tilted 23-k000a Touch: terribly slow internet wifi after upgrade to win8.1 - ENVY tilted 23-k000a Touch

  I bought a few weeks ago.

  After upgrading to win8.1, I noticed the speed of internet was slow, I'm on a connection "Ultra-fast VDSL" yet all downloads by wireless are 15 to 25kbs max.

  If I connect the cable to the modem and disconnect the wireless connection, I get 200 to 300 kbs as I should, but then my game of Ryan box can't find my computer, as soon as I reconnect wireless it can.

  OK, maybe two questions here, but to start I would like to help to get the connection wireless operating at the speed it should.

  Thank you, John

  Maybe I should say kBs...

• HP 2542: no 'button' under HP APPS to scan documents after upgrading to w10

  There is no button under HP apps to scan documents after upgrade to windows 10. There is a button for photo creations, but does not scan.

  Hi @lad1,

  Welcome to the Forums of HP's Support. I understand that you do not have an option to scan under the HP apps section.

  Try to run the HP Print and Scan Doctor.

  The following links should also be useful.

  HP printers - help print and scan the doctor for Windows to solve printer problems

  HP printers - printer problems after upgrade to Windows 10

  Have you tried to use the Windows search feature to search the HP Scan application?

• Lost after upgrade ios10 notes

  How is it possible to recover all the local notes that disappeared after upgrade to iOS 10?

  (On the iPhone 6)

  Thanks for help :-)

  Marco!

  If you have backed up your data, as Apple recommends the update to iOS 10 - official Apple Support, you can restore your iPhone, iPad or iPod touch backup - Apple Support

• Why the back my mail list, text and phone iphone 6 freeze after upgrade ios10

  Why my list of e-mail, text and phone iphone 6 freezes after upgrade ios10?  Have you tried to turn it back on.  Becomes a real pain in the uknowwhat.

  I had the same problem at first but I was testing the first version of ios 10.  but the reason may be due to the low storage? If your storage space is ok please go to settings then general try to look for the software update again just to make sure that you use the latest version of ios usually there a few times an update immediately. If none of these solve the problem, try now button the power button and the home button at the same time (the screen of your iphone turns off a few seconds) touches both simultaneously when you see the apple logo on your screen if all else fails you can try connecting your device to itunes on a pc and run a quick diagnostic test? you go to itunes on a pc if you have already installed on your pc, laptop etc... Look at the upper left side... Click the help... Go to the bottom of the list to "Start the diagnosis" (make sure that all the test boxes have a tick and click ok to run the test) PLEASE NOTE your iphone you will need to be connected to the computer before hand... hope this will help you know if there is a problem, but when I came across this problem with my camera it was because my storage was almost full on my device and in icloud if This is the case then you need to maybe buy more storage or delete applications or games, you do not use this should help solve the problem of storage (if your device is low on storage)? hope this helps somehow.

  Nice day.

• Satellite Z930 - no more Bluetooth after upgrade to 8.1 Windows

  Hello

  After upgrade to Windows 8.1 of the Windows store, I discovered that my Bluetooth printer
  has disappeared. Looking at the wireless settings, no more option to turn on/off Bluetooth.
  How can I return my Bluetooth?

  If you updated the system of Windows 8 Windows 8.1 you must update the drivers too!

  You will find on the page of the Toshiba UE Windows Update 8.1 driver drivers
  There is also a statement of installation containing the installation order.

  1 Intel Wireless display uninstall
  2 uninstall Intel Proset
  3 Realtek Audio Driver uninstall
  Day 4 windows 8.1
  5 TOSHIBA Assist Desktop Upgrade
  6 Intel Display Driver upgrade
  AMD 7 Display Driver upgrade
  8 Intel Rapid Storage Technology driver upgrade
  Update driver Audio Realtek 9
  Update 10 ALPS Pointing Device Driver
  Upgrade of 11 Synaptics Touch Pad Driver
  12 Atheros Wireless LAN Driver upgrade
  13 Intel PROSet/Wireless WiMAX software update
  14 Ericsson 3 G driver upgrade
  TOSHIBA 15 system upgrade driver
  Upgrade of 16 TOSHIBA Service Station
  TOSHIBA 17 function key upgrade
  18 TOSHIBA eco Utility v2 upgrade
  19 TOSHIBA Fingerprint Utility upgrade
  TFPU 20 WBF deleting fingerprints tool upgrade
  21 TOSHIBA PC Health Monitor Upgrade
  22 TOSHIBA VIDEO PLAYER Upgrade
  23 CyberLink MediaShow 6 to upgrade TOSHIBA
  24 TOSHIBA Media Player by TrueLink + Upgrade sMedio
  25 TOSHIBA resolution + plug-in for Windows Media Player upgrade
  26 TOSHIBA HDD Protection upgrade

• HP Touchsmart 23-d055: do I need a new recovery disk after upgrade to Windows 10?

  I upgraded my 2 years, HP Touchsmart in Windows 8 for Windows 8.1 for Windows 10. It took me 6 hours to run all of these updates.

  Now, HP Support Assistant keeps reminding me to create an image of system recovery. But when I run the recovery media creation utility, it warns me that he goes back to the original operating system (Win8). Is it possible to create a recovery image system for my machine on Windows 10?

  I know that Windows 10 now has an automatic recovery partition. But I am concerned by the failure of the disk, which would make this unnecessary partition. Last year, when I've upgraded to win 8.1, I had an alteration of the disc that has occurred without known reason. I lost everything on the PC and to restore Win 8, and I've never touched the PC up to 10 Windows free update is out.

  I created a USB Win8 recovery disk when I got the machine. This is my only alternative? I suppose that if I ran the recovery media creation utility, it would recreate just the same.

  BTW, I know that HP has here a document, but it does on computers provided with Windows installed 10.

  • HP computers - create and use a Microsoft recovery USB drive (Windows 10)
  • http://support.HP.com/us-en/document/c04641788

  Thank you for your help and experience.

  Since no one has replied with an answer to my question, I've finally worked it on my own. I learned that you cannot make a new recovery disk system after the upgrade to Windows 10, if you had already created one when you got your machine under Windows 8.x

  Context: after upgrade to Windows 10, the HP Support Assistant kept prompting me to create a system recovery disk.  I did one when I got the machine 2 years with Win8.  I didn't replace my original recovery disk, so I went out and got a new 16GB USB flash drive. When I inserted this new drive and attempted to create a recovery disk, the PC told me I couldn't do one, because you are allowed to make a recovery disc by PC.

  So it was kind of stupid that after completing the upgrade of Windows 10, HP Support Assistant tells people to do. It should just check itself and see if a disc has already been done. All this anguish for nothing!

• Cursor disappeared on my IdeaPad after upgrade to 8.1 Windows

  Recently, I upgraded my Ideapad to 8.1 Windows with my graphics driver as well as another driver.

  After upgrading my pointer disappeared on restart. My mouse pointer appears always as usual at the login screen, but after I login, it disappears. The cursor is still active, so I can still run applications, but the cursor is not visible and it is very frustrating.

  If someone has encountered this problem with their upgrade and if so, would you be able to share something with me?

  Thank you

  Only, I have solved my problem. After upgrade to Windows 8.1, I noticed that the Pen & Touch option was no longer available in my control panel.

  For those of you who own a Wacom tablet, you need to reinstall you Wacom using the CD they provide and that should solve your problem immediately.

  Windows was going to charge me $160 to fix the problem, saying that my computer must be riddeled with the Trojans, which is the reason why my cursor was not show.

• Second monitor is not detected after upgrade to Windows 10

  After you have installed Windows 10 upgrade Windows 7, my second monitor is no longer functional. The computer is an HP Touch Smart 610-1065qd. I connect on the second monitor through a USB 2.0 Port Replicator 2005pr HP. The Replicator appears as a drive when you look at this PC and an arbitrator in him like HP USB DOCK, as it did in Windows 7. The Replicator seems to work, I can't access the SSD on the device and use a wireless mouse. The receiver is connected to the port replicator. The second monitor, also connected to the Replicator, as it was before the upgrade. Now the system is unable to detect this monitor. The MANAGER of peripheral DEVICES, MONITORS, indicates there is a monitor Active, listed as "PnP monitor" generic Device Manager displays a second monitor as a hidden device. Identified as a "generic PnP monitor' and the State of the device is"currently, this hardware device is not connected to the computer. (Code 45) ». In Windows 7, I don't remember the second monitor listing. USB and the DISPLAY NETWORK DEVICES, the entry is USB PORTS port REPLICATOR 2.0 HP 2005pr. Under GRAPHICS cards, there are two lists. The first is an adapter named "AMD Mobility Radeon HD 5570". This corresponds to my video card. The second adapter named "glance speed Boost. I believe that Ancestry.com can installed this. "This device is working properly" is the condition for both cards. I manually checked new drivers for all components. There is no effect. Then, I went to HP and downloaded the most recent Setup to monitor. I then tried to load the drivers and monitoring software. I also loaded the screen in compatibility mode, then in compatibility mode for Windows XP SP3, then compatibility for Windows 7 and finely mode as a regulator. As a result, I tried the same process with the original disc. After each test, I rebooted the system. Still unable to detect the second monitor, nothing in Device Manager and unable to detect a new monitor on screen. I attempt to change the Projection. He also, had no effect on the display. Then, I deleted graphics cards. First of all, the adapter "AMD Mobility Radeon HD 5570", which corresponds to my video card. Second, the "Speed Boost glance. This also, don't give not any what on second monitor display. Even if it is visible only when show it hidden devices is checked. Any suggestions will be appreciated.

  I finely found a fix for the problem to my question; Second monitor, not detected after upgrade to Windows 10. Not the one I was hoping. It turns out that the fault was with the HP 2005pr USB 2.0 Port Replicator. It seems that the driver may be at fault. After more than a month of waiting, I decided to replace the duplicator. I decided to buy a Port adapter to replace the duplicator. What is much less expensive experiment and see if it was infecting the duplicator. It turned out that my second monitor is back and healthy. I decided to continue to use the port adapter and buy a USB Hub to replace this part of the duplicator. I no longer use the HD Audio output, after replacing the old speakers with Bose USB speakers some time ago. I thank everyone for help.

• ENVY Ultrabook 4-1118tu: no sound after upgrade windows 10

  I've updated for windows 10 (probably my first mistake)

  First of all, I got the screen flashing - problem was to restore the computer difficulty settings - this is not the current issue, gives just some information.

  Since then, I've lost ALL SOUND.

  Not only I lost the sound, but I have no devices appearing in the play sounds option more.

  

  After reading several messages forum - it's what I tried

  HARD RESET - no change

  REMOVE IDT high definition codec, restart maching - no change

  Codec IDT high-definition REMOVING, RESTART HARD - no change

  

  Downloaded a file sp63932, it says that it was incompatible

  RUN HP SUPPORT ASSISTANCE, he said that there is no error and no update

  WINDOWS UPDATE - he said that there are no updates

  NO SOUND through speakers or LAPTOP computer (obviously, no audio playback device installed) - no change

  Tried the driver UPDATE, using devices - get the error message in the image

  

  I'd appreciate some help here.

  Have spent about 4 hours on this now and not getting any where - would just have the back of his.  ;(

  Thank you

  Erin

  Hi, Erin:

  Two other members of the forum lost sound on a computer desktop and laptop PC with the IDT audio controller after upgrading to W10.

  What has worked for them was to install the audio driver IDT W8.1 support their PC and driver page.

  It's the support page for your laptop.

  This package contains the driver that allows Audio IDT high definition (HD) in the notebook models that are running a supported operating system.

  File name: sp60188.exe

• HP ProBook 450 i5 - 4200M G1: SD card reader does not work after upgrade to Windows 10

  After upgrading my laptop HP ProBook 450 G1 i5 - 4200M Windows 7 Pro for Windows 10 Pro, Windows Explorer no longer displays the SD card reader.

  Also, if I connect the iPhone 6, it does not appear in Windows Explorer.

  On the other side, key USB perfect work.

  Please help me.

  Kind regards

  Guido

  Hi, Guido:

  The only suggestion I can offer on the card reader would be to try the driver W10 support page for your laptop if you have not already done so.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5405424&swItemId=ob_150855_1&swEnvOid=4192

  As to why your phone is not appear, unfortunately I don't have any suggestions for this problem.