Satellite Z930 - no more Bluetooth after upgrade to 8.1 Windows

Similar Questions

• No Bluetooth after upgrade to 8.1 Windows - model 1104TX (ENVY m6)

  Hello

  My system is HP Envy m6 1104tx. It came with Windows 8 (64-bit) preinstalled and everything was going well until I chose to upgrade to 8.1 Windows.

  After checking with CompMgmt.msc, I found that I had 3290 RaLink 802.11 Wi - Fi adapter. Just below NICs, I have "Other devices" and under "Bluetooth Controller" with a yellow exclamation mark on the subject. I tried to update the drivers, but it says "Windows failed to install the controller bluetooth"(pas pu trouver pilote logiciel pour votre périphérique). "»

  I've updated almost all possible device drivers, but this 'Bluetooth controller' still shows a yellow exclamation mark on it.

  Also in CompMgmt.msc I can't find "Bluetooth" or "Bluetooth Module" but on the contrary, there is a 'profiles Bluetooth device' and inside this 'Bluetooth Interface Driver profile '. I tried to update, but the result was still once, as mentioned above.

  So, how to solve this? How to make implementing Bluetooth on my m6 desire?

  PS And yes I ran Technical Assistance from HP, but it says everything is fine. And in reality it is not, Bluetooth does not.

  RENJ

  Thanks Makachaka,

  I really appreciate your time and your help. However your suggestion came a little too late.

  I had already solved my problem with Bluetooth using the instructions contained in the following web page:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-hardware/Bluetooth-systemthreadexceptionnothandled-blue/e9e410d4-ef73-40C2-9e4e-b05c5d604c6c?LC=2057&auth=1

  The gap only I took while troubleshooting from the procedure described in the page Microsoft above was that I didn't not apply the patch from Intel Bluetooth. The rest was exactly as described. Problem solved for me.

  @Makachaka: thanks and have a great year!

• After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged as an administrator, but cannot connect to the internet using the standard account. How to fix this?

  After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,

  but unable to connect to the internet using the standard account.  I have the latest version of the Solution Explorer.

  How to fix this?

  Glad to hear it.

  If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem.

• Satellite L100 113 starts slowly after upgrade memory

  Hello

  Toshiba Satellite L100 113 PSLA3E-02401JRU starts slowly after upgrade memory with Kingston KTT533D2-512 (512 MB) of memory.
  When I press the 'power' button, it flashes, starts the fans and HARD drive several times. Then it shows BIOS start messages by memory full 768 MB and starts Windows XP without a problem.
  This behavior is noticed only after "shut down."
  It does not happen with "restart".
  What can I do to eliminate this long "attempts" to start my laptop computer?

  Thank you
  Novomir Kovalenko

  Hello

  This problem appears before upgrade memory?
  Have you used exactly the same memory modules?
  If this isn't the case, then perhaps there are a few compatibility issues.

  Usually, after the insertion of the modules you must enter the BIOS and then save the settings. Please it and eventually the laptop will start without any problems.

• No connection more domain after upgrade 6.0.1.2-> 6.1 user

  We have upgraded identity GOES, GOES vCAC and Iaas Server (OS is Windows Server 2008 R2) of vCAC Version 6.0.1.2 to Version 6.1 according to the guide of "upgrading to vCloud Automation Center 6.1". The upgrade went successfully, and all services on the vCAC GOES (21 in total) came after upgrade.

  After the upgrade, we were more able to connect with domain user accounts. The "process of connection" takes about 10 minutes. Then, we receive a screen error like below. Each time with another hard to code number. (Same behaviuor on IE, Firefox and Chrome in different versions)

  It is always possible to log in with the administrator account on vsphere.local. It's no problem.

  Change Active Directory integrated login will solve the problem for the tenant by default, but for the other tenants there is only available auth ActiveDirectory. To change the built-in ad ad auth is not an option for us.

  Anyone experienced the same or similar issues.

  Problem has been resolved by VMware. We have opened a file and engineering has provided us with a patch in identity WILL (--> replaced vmware-identity-idm - server.jar).

• Pavilion laptop g6 - Wifi problem after upgrade to 8.1 Windows

  KIM

  I have a Pavilion Notebook - C3M29EA #AB7 g6 and upgraded to 8.1 windows yesterday.

  Since then, I was unable to detect my own wifi connection while I am able to detect my neighbours. (Everything worked fine before the update).

  Any suggestions?

  -Same here.

  After an hour of time I will ever come back that I solved the problem.

  (1) go on the internet via the wired LAN port

  2) update drivers for Ralink wifi adapter

  Go: Right click on the wireless network connection icon: properties/Configure/tab Driverr/update driver

  (3) after a minute or two of updateing the PC reports that the driver has been updated

  (4) pull the network cable and turn on WiFi.

  What a pain in the anus,

  Anyway, as I said, corrected!

  Dansda.

• Cursor disappeared on my IdeaPad after upgrade to 8.1 Windows

  Recently, I upgraded my Ideapad to 8.1 Windows with my graphics driver as well as another driver.

  After upgrading my pointer disappeared on restart. My mouse pointer appears always as usual at the login screen, but after I login, it disappears. The cursor is still active, so I can still run applications, but the cursor is not visible and it is very frustrating.

  If someone has encountered this problem with their upgrade and if so, would you be able to share something with me?

  Thank you

  Only, I have solved my problem. After upgrade to Windows 8.1, I noticed that the Pen & Touch option was no longer available in my control panel.

  For those of you who own a Wacom tablet, you need to reinstall you Wacom using the CD they provide and that should solve your problem immediately.

  Windows was going to charge me $160 to fix the problem, saying that my computer must be riddeled with the Trojans, which is the reason why my cursor was not show.

• creating recovery media after upgrade to 8.1 window

  Hello friends. I have a lot of confusion. I bought a laptop on December 2012 with window 8 preinstalled and created the recovery media about 6 or 7 months later. And now, I upgraded my system to window the window store 8.1. And now again I would create a recovery media for windows 8.1. So my question is if I create recovery media on a flash drive usb and if in the future I want to reset my pc or reinstall my system, I'll make window 8 or 8.1 on my system. I'm not a computer expert. If anyone can help me please. Thank you.

  Hello:

  You will get Windows 8.

  If you want to do a recovery W8.1 image you can do the following...

  You can create a system image in W8.1 and save it on a portable hard drive or set of DVD as you might in W7.

  Instead of making a bootable cd as in W7, you need a boot flash drive boot. You can use a flash drive to very small capacity (256 MB) for the startup recovery W8 flash player.

  Check out these links for more information.

  Create the image of the W8.1 system:

  http://www.hanselman.com/blog/CreateACompleteSystemImageBackupWithWindows81AndFileHistory.aspx

  Create bootable W8.1 flash player to access the system image.  Don't forget, you can use this drive, you can boot from it and access the system image you created on DVD or a portable USB hard drive.

  http://anewdomain.NET/2013/09/13/create-USB-recovery-drive-Windows-8-1/

• Cannot set UEFI after upgrade to 8.1 Windows (P6 HP 2364ea)

  Hello

  I recently bought a HP P6 (Pavilion) 2364ea tower that came with Windows 8 is installed. When buying I could enter the parameters of UEFI at startup by pressing one of the function keys. Now that I have upgraded to 8.1 Windows no splash screen or UEFI settings are available when booting - any function keys I type.

  I tried to reboot to the Windows Advanced Boot-> troubleshoot-> advanced options-> settings for UEFI firmware road but the PC starts just to a white screen with no hard disk activity. I then reboot into Windows 8. The same thing happens if I try to change the windows startup options.

  Any help would be greatly appreciated!

  Thank you

  Gary

  I have now managed to access the UEFI settings using an old VGA monitor to start instead of my screen thanks to a post of dave2009 on another thread. For anyone having the same problem here is his message:

  I hope it will work for you or someone else. I felt the same way - try to access the settings of the PC UEFI firmware and got a screen empty every time. Tried the ridiculous press F10 every second. Nada.

  Fortunately, I came across this post that put me on my solution. It's actually the BIOS could not display on my monitor (s).

  The BIOS has been there all along, but I didn't know it.

  My setup is a HP Envy with Intel HD graphics office built in connected with DVI to HDMI cables to 2 HP w2338h monitors that have a native resolution of 1920 x 1080 or more. Solution? Unplug everything and plug an older monitor CRT HP with a VGA to DVI. Seriously. My new HP desktop cannot display the HP BIOS on my HP flat screens. Now, I'm not going to dig into this but I suspect even just plug one of the flat screens equipped with a VGA connector could do the trick.

  And wa - la. My firmware is not corrupt. I need not do anything crazy. I just needed to downgrade my video connectors in order to see the bios. And, now that I have my graphics card inherited here, I see this cute bootscreen of HP. Previously, black until the windows open. It's a whole new world!

• Windows install-"error 1325 - 'Documents' is not a valid short file name"; After upgrading from Vista to Windows 7, cannot load new software. ____

  After an upgrade from Vista to Windows 7, everything on the system seemed to work properly. up to what I tried to re - install everything deleted software or install new software.  As soon as Windows Installer starts the following error message appears: "error 1325 - 'Documents' is not a valid short file name.

  If this could have something to do with the new pads MSFT security permissions on folders (with padlock) during a upgrade as well as related hidden junctions by compared to the user by the system?

  I tried to install the update system of Lenovo and MSFT Windows Installer Clean Up clean in the hope that the software would help alleviate my problems. See below the link on advice from MSFT on the same error.

  http://support.Microsoft.com/%2Fkb%2F328162

  Unfortunately, I cannot even load the previously recommended THAT MSFT software to solve this error.  I also tried to install the software as 'Run as Administrator' and in 'Safe Mode '.  Even if I could not load the software recommended to MSFT, I was able to install iTunes to Apple through Apple Software Update, I guess, that they do not use Windows Installer.

  With the new structure of junction there is several files or links to the same folder across file system, if it is a folder authorization number which specific files/links are I need to remove restrictions?

  Any help would be appreciated, if not I'll have to do a clean install and individually reinstall each piece of software... Thank you.

  I think I found the solution for this point, because I have just encountered the same problem in our environment and here's what I did to solve it:

  -Create a higher level permissions at the root of the folder redirection (for example \\servername\mydocredirfolder): grant the Group authenticated users the following permissions and apply it to "this folder only" ALLOW: list folders/read data, reading, reading attributes, read extended attributes, create files / add data

  I think the MSI is trying to read the free space on the disk on the server, but it cannot because it tries to access the folder where your my documents redirection is sitting.

  Good luck!

• Unable to connect after upgrade to 8.1 Windows

  I also have problems to connect to my computer. I've upgraded to 8.1 windows yesterday and cannot open a session today. I have reset my password and that does not work either.

  Its strange that this site recognize my new password but my computer doesn't work?

  They gave me a website to go on live chat - guess what it does not work or the other. I need a phone number to call to speak to someone.

  You can go to www.microsoft.com/support and choose your problem talking to this Department.

  The reason why the site recognize the new password, but your computer is probably due to your computer, not seen yet synchronized with the online system.  Your computer cannot be connected to the Internet or WiFi, meaning that he had a way to 'know' the new password.

  If you have another administrator level account on your computer, you can go to reset the password.

  If there is no administrator account on the system, you can start safe mode to access the built-in Administrator account.  Since this fail-safe account, you can force - reset your account password.

  1. BLAH, the logon screen, click the Power Options icon, then hold down the SHIFT key while you click the Restart option. Keep now shift until the screen shows it restarts.
  2. On the first screen that appears, select troubleshooting, and then select Advanced Options. Finally, choose the boot settings and click Restart.
  3. On the next screen, press the number 4 to choose Safe Mode.

  Now that you are in safe mode, you can use the backup Administrator account built for perform you a necessary recovery. Built in Administrator account should not be used for any other purpose, or it is not available in such situations when you need it.

  1. On the login screen, click on the arrow icon, and then select the administrator account.
  2. After the Safe Mode boot, press on + W and open the control panel / user accounts.
  3. Select manage another account, and then select the account you want to switch to an administrator account. You can also use the option change password here to reset the password of the other account.

  When finished, restart the computer normally.

• Lenovo Y400 HDD partition after upgrade to 8.1 WIndows

  I upgraded my Lenovo Y400 Windows 8.1, and I noticed that there are 8 partitions on disk 0. Is this normal?

  Otherwise, what partition I could merge/delete/resize without sacrificing the functionality of One (OKR) key recovery?

  

  I want to buy SSD in the near future (probably 128 GB) and want to use it as a system and my existing as data storage HARD drive. It is possible to clone my disk SSD with the always OKR works?

  Thank you very much!

  Here's the original scores, as seen in another way:

  

• After upgrading my OEM of Windows 7 to Windows 8 Pro license, can I switch my license of windows 8 to a new pc?

  IF I upgrade my license OEM windows 7 to Windows 8 Pro, can I transfer my windows 8 pro license to new PC?

  If I need to re - install windows I have to install my copy of Windows 7 oem first and then install the upgrade of windows 8?

  I thought that the new license windows 8 would take the place of the old 7 oem?

  Well, it does, but you are moving elsewhere, but you cannot benefit from rights eligible OEM Windows 7 license to another machine, because the OEM for Windows 7 license was already tied to the first machine that it has been installed on.

  The machine that you transfer the Windows 8 license must have a previous qualification license (XP, Vista, Windows 7, or even Windows 7).

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

• Satellite Pro C870 - 1FL PSCBBE - not more than Bluetooth after upgrade to SSD

  I have a Toshiba Satellite Pro PSCBBE C870-1FL with 64-bit Windows 8.

  For a Crucial m500, I changed the 240 GB hard drive.
  With this disk, Windows cannot find the bluetooth adapter:

  WIN8/64 on original HD - Bluetooth OK
  Win7pro/64 clean installation with the original site HD - OK Bluetooth drivers

  WIN8/64 restored rescue DVD - SSD - Bluetooth adapter not found
  Win7pro/64 own facility managers website on the SSD - Bluetooth adapter not found

  Please can you help me make Bluetooth works with the SSD

  Concerning
  Harry

  Hello

  From my point of view it s not matter if you use the SSD or HARD disk drive.
  This should not affect the functionality of BT.

  I think that its driver / software problem and, therefore, you should check this first
  Satellite Pro C870-1FL was equipped with a Realtek WLan / BT combo card.

  The driver BT / install the software according to the system you are using.
  So in the case of Windows 7, you need to install the package of added Value Toshiba, Realtek WLan driver, packet filter for the driver Realtek BT and BT Toshiba stack.

  In the case of win 8 you must install the driver of Toshiba system and the Realtek Bluetooth driver Package filter

  Please check the two options

• Satellite C850D-11 q - No. Bluetooth after upgrade Windows 10

  Hello
  Just upgraded to win 10... nothing about Bluetooth in Device Manager... this model not have these abilities or are malfunctioning... tia

  Hello

  In most cases, BT does not work due to lack of BT software.
  The point is that most laptops use a module for WLan and BT.
  This combo module WLan/BT requires additional driver filter...

  According to your WLan / module BT, you will need to install the filter for the BT driver package.
  In most cases the 8 Win / filter package 8.1 Bluetooth driver should work under Win 10...

  But you have to watch for the manufacturer of modules... There are different modules like Atheros, Intel or Realtek