No video after Flash 8 Video Encoder

Similar Questions

• Flash video encoding with x 264

  I'm going nuts trying to find a definitive answer on video encoding for FMS (RTMP).  All the docs I found speak by CBR (constant bitrate encoding).  But all the tools I tried to not support CBR or so bad it will take months to complete the work that I have.

  Does anyone know if the VBR is a dealbreaker for Flash using FMS video streaming?

  -J' tried Adobe Media Encoder supplied with CS4, but he does not like my source files.

  -Sorenson Squeeze 5 not CBR, but it is very slow.

  -x 264 seems to be the winner regarding the speed and quality, but it does not support CBR.

  -H264 of MainConcept does CBR (I think it's the same codec encoder from Adobe), but the Pro version is $ 1,000.  :-(

  Am I missing something?

  Any suggestion would be great!

  Hey once again

  IM using Sorenson on a laptop with Duo CPU 2.40 GHZ and 4 GB of Ram. Its no where it is as slow as you describe.

  From my experience, you should have a 1:1 relationship in the long term when encoding on a decent computer specced. So if the source material is 60 minutes it should take about the same time (maybe a little more short/long) to encode the material to a new format. Special like 2-pass VBR or similar settings could increase the time to.

  I suggest you contact Sorenson and ask if they might have a suggestion.

  Episode engine is in my opinion more than one professional tool - where higher prices. The performance is about the same that Sorenson on my laptop - but you have even more control of the different parameters. You can download a trial for the encoder Office on their site, I recall: http://www.telestream.net/episode/overview.htm

  FFMpeg is really decent too - but it lacks the nice interface of Sorenson.

• video to FLV created with flash 8 video encoder

  Anyone know why the flv files that I created using the flash 8 video encoder does not seem all the metadata in them? or maybe what they do but they never kick off the NetStream.onMetadata event so I can't read...
  
  Even if I use the "import video" function of Flash Pro 8, I have the same problem - still video FLV created using Sorenson Squeeze works very well, so I'm pretty confident that my code is OK.
  
  Even more strangely, if I use the FLVPlayback component comes with Flash 8, which seems to read OK metadata!
  
  Argh!
  
  Just to complicate things even more, using flash for NetStream.onMetadata said: "the utility Flash video exporter (version.
  1.1 or higher) incorporates video [...] time in the video file itself. »
  Far as I can tell I have the 1.0 version of the encoder/exporter video flash but I'm damned if I know where to get an update of...! Since CS3 came out, it has been harder and harder to get things about flash 8 on the Adobe site...

  Well, that's the thing - the metadata never trace if the video is encoded with encoder flash video, but this code would work very well with video encoded with sorenson squeeze.

  think that I worked on it now though: in order to pause the video at the beginning I call NetStream.seek (0) when I get "NetStream.play.start".
  For some reason when I do this with encoded flvs using the encoder flash video, stop the shooting onMetaData event - it works very well with other FLV files! weird... will have to find another way to break the video at the beginning I guess.

  Thanks for the reply though

• Can I really work on videos with first Pro CC and export to Flash Media Live Encoder for live stream?

  I'm looking for a great coder with features like titling. Adobe first Pro CC has great features, but I can work with it and export my files for Adobe Flash Media Live Encoder for live streaming.

  You can not.

• Black screen after flashing to latest BIOS

  Nothing but black screen after flashing the latest bios (fan, leds work)...

  I can do, or that of new bios/motherboard can help? (I tried to rest the battery, press F8...) Thanks in advance

  I presume that the BIOS is doomed. What you need is a professional help with this then contact the nearest service provider and ask for help.

  By the way: check this forum using the advanced search option. In the past, I have seen several interesting discussions on BIOS recovery. I m quite skeptical on this subject but maybe you will be lucky and find the solution.

• Satellite A500-1DN (PSAR3E) - Dead BIOS after flashing

  Hi all.
  First of all, sorry for my English.

  My problem is simple, I have a bios dead after flashing Toshiba service station (or something like that).

  How it happened? : 4 days ago, it asked me to update. It was for me quite normal because she asked for updates on a daily basis. I enablished day and after a few cliks on button then I noticed it has been updated to BIOS and is almost in half. I wanted to wait to the end (because I know if I stop uptade of bios, I end up with dead bios (bios corrupted)) but collapsed almost at the end and he showed me a few errors. After that my laptop did a restart and I couldn't stop it. He died.

  Now, if I push the power button / stop I get a screen black (as it is off) som LED turns on and the Cpu fan to perhaps 10%.

  What I did the last 3 days? : I searched all the residents on what to do with it. I tried maybe 10 types out crisdisks with usb and CD (with floppy isn't becose Bios for my laptop is too big for 1 floopy).
  I tried to start with FN + B this has worked for me CD player began to search for CDs, USB key showed activity, but dead end happened nothing. I tried to make the Boot usb with the latest minidos.sys and phlash16.exe. I tried to combinate but still nothing.
  I tried everything I found on internet forums around. Nothing helps.
  Another thing is that only bios I found was 1.90. If anyone has an older bios for my laptop pls give me a link. I'm losing hope becose I can not find anithing on google.
  I am an advenced user I almost did this medication with the pc, but I've never worked with dead bios.

  Pls someone help me and give me a correct crisdisk for my model. Or another sugestion.

  Hello

  Sorry, mate, but you should contact the http://eu.computers.toshiba-europe.com/innovation/generic/ASP_SUPPORT/ ASP.

  Unfortunately, the warranty does not cover failure of the bios and you will have to pay about US $ 50-60 (anyway, it costs like that in my service center)

• ProBook 470 G3: ProBook 470 G3 fan system after flashing the BIOS errors

  B has recently purchased a HP ProBook 470 G3 with i7 CPU. When I got the laptop I placed my own memory and M.2 SSD in and performed a clean installation of Windows 10 x 64. Everything was fine, I installed all the drivers and the laptop worked perfectly. However, when I flashed the new BIOS, V1.07 Rev A, I started to have problems.

  I use the laptop for academic purposes, I so open and close several times a day. After flashing the BIOS again, the laptop awake sometimes not, and trying to turn off it I had to remove the battery. Would not even holding down the power button for 20 seconds. While booting after removing the battery, I'd get a system error, 90 b error code fan.

  I tried re flashing version 1.07, but returned eventually to version 1.06. This version works very well. It was a real let up to me, given that this laptop costs €1400,- and should be a book reliable business.

  Is their another experiecing the same problems? If so, how do fix you it? And no one knows when they will be a stable version of BIOS V1.07?

  Use the PC Hardware diagnosis UEFI to restore the previous BIOS so that that you flashed cause questions.

  Press the power button and then immediately begin to press the F2 key to evoke the Diagnostics menu.

  Choose firmware management. In the menu next, choose and click on revert to the previous version.

  You can also create and use the 3-in-1 usb to accomplish the same.

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/PC-DIAGS.html?JumpID=va_r602_us/en/any/PPS/pl_ot_ob_ds_pd/HP_PC_Hardware_Diagnostics_cc/DT

• After flashing my Bios on Pavilion DM4t-1100 CTO, I can no more enter the BIOS setup

  After flashing my Bios on Pavilion DM4t-1100 CTO, I can no more enter into the BIOS setup (via the ESC key).  I installed the BIOS twice and the computer always ignores the ESC key and launches Windows 7.  Any ideas?

  Well you're response made me experiment more and I discovered that the ESC key works if I type repeatedly instead pressed constantly.  Thank you for taking the time to answer!

• After flash MXTP doest accept my google accaount

  I buy the phone at Amazon 24.12.2015
  E2306 rev2 1297-2190 26.1.A.2.99 R3A
  The phone has been laggin and I decided Flash a different rom via flashtool

  After flashing custom USA R10A, you can call the 1297-3910 to the start 26.1.A.2.99 have a massage - LOCKED my Xperia - enter my login and password for authentication (google account) > sing in google successful account and after thet MXTP tell me an error - wrong username or password.

  I do not save the version of the 1297-2190 26.1.A.2.99 R3A rom which was on the phone when I buy and now didn't now that do.
  There is no such version 1297-2190 26.1.A.2.99 R3A on flashtool

  Can someone help me?

  1. on the computer, go to https://myxperia.sonymobile.com/

  2 sing with my google account

  3. select my phone Sony Xperia M4 Aqua

  4 wipe the data on my phone

  5. on the phone MXTP singing with my google account

  The phone is unlocked!

• El Capitan Flash Media Live Encoder problems

  New MacBook Pro with El Capitan installed. Trying to install Flash Media Live Encoder 3.2 and it says 'Install' damaged and cannot be opened. Eject the disk image. Any suggestions?

  Go to System Preferences > Security & Privacy and allow the applications from "everywhere". That fixed it for me!

• Flash Media Server/Flash Media Live Encoder

  Hello I just installed the add-in on my FMS 3.5 server authentication (Windows 2008 Server - 32-bit).  I created a user and verify that the username/password is correct; However, whenever I try to connect to the server through Flash Media Live Encoder 3.2 I get not found user.  Again, I'll go back to the utility on the FMS and check and the username/password combination is valid.  I'd appreciate any help, I'm stuck.  Thank you.

  Please re-read.  Yes, I restart. I understood what was my problem on yesterday.  I needed run the utility as 'administrator' command prompt so that the users.exe to run entirely.  It was a permissions problem. Thanks again!

• How to start Flash Media Live Encoder?

  Hey everybody,
  
  I installed the Flash Media Server v4.3 and Flash Media Live Encoder v3.2...
  
  Question: How do I start OUT?
  
  Thank you

  on windows debut icon / all programs/adobe/and you should see the flash media live encoder if it does not work and you are on windows 7, you can use the start menu search bar... If you XP you can always get the .exe in C:\Program Files\ and look for adobe or flash media live encoder once found right click and create shortcut may put it on the desktop or you may need to Drage the shortcut on the desktop. I have not used XP in almost 2 years and become a keepsake for my memory

• Is there a way to pass a name of user and password for Flash Media Live Encoder?

  I don't know if this is the right place to ask this question or not, but I thought I remembered a way to pass a user name and password to FMS via Flash Media Live Encoder? I simply need to pass two values, equivalent to this in AS3:

  netConnection.connect(url, "username", "password");
  

  My application requires authentication for publishers, for security reasons, and for some reason I can't find the option to do this in OUT. Am I missing something?

  You pass cannot connect to arguments, but what you can do is to pass in as GET vars on the connection url and then make sure that the client.uri property in your onconnect handler on the server side.

• After Effects to Media Encoder does not queuing video

  Media Encoder isn't queue my video when I try to make the video using After Effects.

  This is! You have the wrong version.

  You get AE version 13.8 (AKA CC 2015.3), which is basically CC 2016.

  Or use the older version of Adobe Media Encoder.

• MovieMaker in Windows vista stops after appox 4% of the video encoding

  Can transfer files in MP4 format, dvdmoviemaker starts to code for burning, then the program stops working after about 4% finished

  It may be interesting to try to disable all filters in
  Creation of DVD before burning, but I suspect there
  is a problem of compatibility with the. MP4 files.

  See the following article:

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker
  (scroll waaay down for...) What to do in case of problems)

  If you convert the. MP4 files to the. WMV format
  before importing, you can have a better result:

  There are to many converters available on the net...
  some free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup295.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag > FFSetup295.exe< out="" of="" the="">
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...