No video after upgrade on the spot
I did an in place upgrade to repair Win7 pro and I didne uninstall Catalyst Control Center, Manager of catalyst or iTines. Now, I can not complete the installation because the video went including external monitor. I can boot from the disk installation for recovery options. Is there a way to repair the video through CMD? I tried this but got the error listed. (http://www.sevenforums.com/tutorials/272460-programs-uninstall-using-command-prompt-windows.html)
RESOLVED: The bios boot and search for a video and pass dynamic Fixed. And then finish the installation and remove CCC and Catalyst Control Manager, the reinstallation of the product page.
Tags: Notebooks
Similar Questions
-
An upgrade on the spot with a Vista Home Premium SP1 won't work...
My Vista Home Premium has some problems such as the audio service starts do not. Microsoft sent me a Vista DVD but it is SP1 and I installed SP2. It will work yet? I want to perform and the upgrade on the spot, but it does not give me the option to upgrade... just do a custom upgrade which is really just a new facility.
Any help is greatly appreciated!
Ryan Ryan Kaskel Internet Consulting http://www.ryankaskel.com/ http://consulting.ryankaskel.com/ RyanKaskel.com
You will need to uninstall SP2.
The SP installed cannot be higher than the SP on the DVD; Otherwise, the operating system installed is newer than what's on DVD, and upgrade is not available...
http://support.Microsoft.com/default.aspx/KB/948537
How to uninstall Windows Vista service packs as a troubleshooting step
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
Above the tutorial shows you how to do a repair installation.
See you soon. Mick Murphy - Microsoft partner
-
After upgradeing to the 8 elements is 13 elements safe to uninstall elements 8
After upgradeing to the 8 elements 13 elements is it save to uninstall elements 8?
Hi Robin,
If you do not want to use the Version 8 more and moved to 13; You can go ahead and uninstall it.
Reference: uninstall | Adobe Premiere Elements | Photoshop Elements
Kind regards
Sheena
-
Can not find my videos after upgrade
Hello
Since I upgraded my iPhone camera 5 I can't locate my videos in the film nor in my backup iCloud account. Curiously, when I connect the device to my computer via a USB cable it says that only 5.7 GB GB 14.7 is free. It seems that my videos are still on the device again for some reason that I can't access...
Please notify.
Thank you!
Missing videos after activating the iCloud photo library? Here's how to get back them!
-
K3 Note Wifi problem after upgrade to the marshmallow
Guys, after upgradation of Marshmallow in k3 note, there arise a problem of wifi, it just dropeout every minute like connect for 1-2 seconds and disconnect then automatic...
If someone knows how to fix this please tell me... I have hard reset my phone but the problem is not solved... so please tell me the solutionNote from the admin; phone added to the subject type
-
After the upgrade of the software of the date and time of my SPA is taped:
Current time: 01/01/2003 12:10:11
and therefore can not save. I tried to change to multiple NTP IE: time.nist.gov or ntp.sipgate.net but nothing gives.
Anu suggestions how to solve this problem?
Make sure that the machine is on the internet or that he makes the DNS server addresses.
You can also try to point to an IP address of the local computer to use his time.
-
Scan C5180 not working after upgrade of the mavericks
After upgrading my Macbook Air to the operating system of Mavericks, my software of scan C5180 does not include the overview / dots a longer selection. These are the points that allow you to select only part of the image of bed scanner for treatment.
The scanner / printer software has been updated by the o/s update Lion to the Mavericks.
MacBook Air does not include a CD option, so I can't go back to the original driver.
Thanks, but none of it helped.
I got running again by installing an older driver from a site "archived drivers." And I will decrease just suggestions more Apple to upgrade a current driver for the C5180.
Search Google proposed this solution after a number of other people had the same problem after upgrading them to the Mavericks.
/ Dual rear wheels
I consider this matter closed.
-
Problem with the rules after upgrade of the VM in foglight cartridge
Hello
There is a small problem with the rules after that I updated the VM cartridge level.
In the default rules, I changed a few settings so that they will act as I need.
However, each time I upgrade VM cartridge my rules are off and marked as backup.
The question is: is there a way to upgrade the cartridge and keep my active rules after upgrading?
Best regards
Victor
This is the normal behavior according to this KB article
https://support.quest.com/SolutionDetail.aspx?ID=SOL105872&PR=Foglight
105872 knowledge article
Title
Backup rules fill in the dashboard management rule after Foglight upgradedDescription
After that an upgrade of Foglight was conducted, several backup rules are created for rules that have been published before the upgrade. For example:
Cluster VMW IO network
Cluster VMW IO network (backup)Resolution
During the upgrade procedure, the FMS has detected that some of the original rules have been changed in some way. It copies the rules previously upgraded in backups, before trying to merge the contents of the update rule in the former.
Assuming that the FMS works as expected, the rules of backup can be deleted. However, it is best to confirm this in the respect of the rules first before making deletions.
When editing rules, particularly rules OOTB (out of the box), it is recommended to copy the original rule, disable the original rule and edit the copied rule. This should reduce the risk of the problem described in this Article.
Golan
-
Not be able to start DW CS4 after upgrade to the final version of Windows 10
Dear Sirs.
I installed DW CS4 on Windows 10 Preview Edition and it worked fine. After the upgrade to the final version of Windows 10 I'm no more able to start DW. I guess it's a problem with licensing. I just tried uninstalling and reinstalling, but is not changes anything.
Thank you for your help... Michael
There are some ongoing discussions about this, one of them in W10 is...
Do a search for CMD
The icon right-click command prompt and choose Run as administrator
In prompt, type (make sure that space is there between sfc and /)
sfc/scannow
Press enter
When finished, restart the computer and try again to DW.
-
Email does not work after upgrade to the APEX
Operating systems: Windows 2003
DB: 11 GR 1 material
E-mail no longer works for users after upgrade from 4.0 to 4.1. New APEX_040100 'main' added to the ACL as well as the main APEX_040000 of the previous version. In fact, the two still exist in the ACL.
Error code in the APEX Admin Mail queue: ORA-24247: access denied by access control (ACL) of network list
What could be the cause of the installation of electronic mail within the APEX to not work?
See you soon!See what {message identifier: = 10355015}
-
Satellite 1400: I get IDE-error after upgrade to the slimeline DVD - RW drive
I have the laptop with a DVD-ROM above it. (Second hand and no manual)
I have a DVD - RW Drive (SOSW - 852S) I would use.I can adapt without any problems.
It freezes on the spot but for about 2 minutes and then it says IDE-error then it it boot XP.
When I go into my computer there is no DVD player.
Have I missed something when I put the disc?
I can't? t get the BIOS to check it out.I tried most of the buttons for example F2.
Hi David
It s a clear case for all those who have a little experience with mobile technology.
You must know that not every drive slimeline is compatible and supported with the device.
The Player supports uneditable master / slave or c - salt settings.In your case, the laptop freezes 2 minutes because the BIOS trying to find STRANGE.
This is not possible because of wrong settings and pops up the error IDE. -
update not available with this ID apple after upgrade of the Genius Bar
I had the Apple Store me level to El Capitan. Today, my attempt to apply an iPhoto update resulted in response that says: "update not available with this Apple ID. This update is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled. »
Please test after each of the steps that you have not already tried it. Stop when the problem is resolved. Back up all data before making any changes. Remember, no one here is Apple or can help in problems of service the customer.
Step 1
If you have recently changed something in your Apple ID account (for example, the password), log out of the App Store and reconnect.
Step 2
A purchased app can only be updated by logging into the App Store with the same identifier Apple which was originally used to buy it. There is no way around this restriction, which applies also to the free applications. If you can not connect to help ID the buyer, remove the app and reinstall it. You will have to pay for it, once again, as appropriate.
Step 3
If you receive the alert when you try to update a grouped iLife application, select the shopping page in the App Store and find the application in your purchase history. If there is a button marked ACCEPT on the right, click on it.
If you have a used Mac, bundled apps related to Apple ID of the original owner and may apply to you. Reportedly, customer service has published codes redemption to some owners of second who asked, but it is not guaranteed.
Step 4
If you try to update the iLife or iWork applications that were installed from a purchased DVD, or if you have a refurbished Mac purchased directly from Apple, contact App Store customer service for a redemption code. You will be asked for the part number of the DVD.
Step 5
In the App Store menu bar, select
Store ▹ view my account
Enter your Apple ID to the command prompt. In the lower right corner of the window that opens, click the reset button. Close the window.
-
Impossible videos after connecting to the TV.
Original title: video memory Gone Bad?
Did a glance see my video memory by using the method of office, and he said: Total available graphics memory - 256 dedicated - memory 0; Video system - 64; Memory shared system - 192.
It's not jive with the numbers others say that they should read.
I watched that video streaming has become increasingly stuttery; What is important, it happens more often normal places a few that occurred. Looks like that the buffer does not work. This laptop is plugged into my TV.
This could be the cause?
Hey Joe,
Please write us with the following details.
- What is the brand and model of your computer?
- The browser you are using to stream video?
- Are you able to videos without being connected to the TV?
If you use Internet Explorer for videos then you might face this problem due to several reasons, set out below could be some of the reasons.
- If you do not have the latest version of Internet Explorer.
- Web sites are not compatible with the version of Internet Explorer you have.
- If the concerned modules are not installed or disabled.
I suggest you follow the steps below to solve the problem only if you use Internet Explorer 10 for video. If you have another version of Internet Explorer installed on your computer, then please change the version press the arrow at the top right of the page.
Why the videos will not play in Internet Explorer?
http://Windows.Microsoft.com/en-us/Internet-Explorer/videos-Don ' t work #ie = ie-10-win-7
Note: feature reset Internet Explorer settings might also reset parental controls and Add-ons settings. We recommend that you note these sites before using Internet Explorer settings reset feature and re - activate the Add-ons.
Write to us at the State of the question. We will help you.
-
Illustrator does not start after upgrading to the latest version
After updating to the latest version of Illustrator CC (2014), I was impossible to launch the app kept crashing. Even basically impossible to open the file!
mmyazid,
Here is the update of Extensions suitcase 5 that may solve the problem.
http://www.Extensis.com/support/product-support/Suitcase-Fusion-5/
-
Battery life after upgrade of the El Capitan is very bad
Since the upgrade to El Capitan, it seems that my battery drains quite quickly. Here is my EtreCheck report. Please advise on what I need to do to get back to normal. Thank you
EtreCheck version: 2.6.6 (226)
Report generated on 05/01/16 15:03
Time 03:14
Download EtreCheck from http://etrecheck.com
Click on the links [click for support] to help with non-Apple products.
Click on the links [click for more details] for more information on this line.
Hardware Information: (Does that mean?)
MacBook (13 inch, late 2009)
[Click here for the User Guide]
MacBook - model: MacBook6, 1
1 2.26 GHz Intel Core 2 Duo CPU: 2 strands
8 GB of RAM expandable
[Click here for upgrade instructions]
BANK 0/DIMM0
OK 4 GB DDR3 1067 MHz
BANK 1/DIMM0
OK 4 GB DDR3 1067 MHz
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 1286 - SN = W000881YP9X7A
Video information: (Does that mean?)
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
OS X El Capitan 10.11.2 15 c (50) - time since started: about one day
Disc information: (Does that mean?)
TOSHIBA MK2555GSXF disk0: (250,06 GB) (rotation)
EFI (disk0s1)
: 210 MB Swope MacBook (disk0s2) /: go-go 249,20 (97.27) free
HD (disk0s3)
[recovery] recovery: 650 MB MATSHITADVD-R UJ-898)
USB information: (Does that mean?)
Built-in ISight from Apple Inc..
Apple Inc. Apple keyboard / Trackpad
Microsoft microsoft¬ae Nano Transceiver v1.0
Apple Inc. BRCM2070 hub.
Apple Inc. Bluetooth USB host controller.
Configuration files: (Does that mean?)
/ etc/sudoers, 1242 but file size expected 2299
Mac App Store and identified developers
Kernel extensions: (Does that mean?)
/ Library/Application Support/MacKeeper/AntiVirus.app
net.kromtech.kext.AVKauth [no charge] (2.3.9 - 10.10 SDK) [click for support]
net.kromtech.kext.Firewall [no charge] (2.3.9 - 10.10 SDK) [click for support]
/ Library/Application Support/Roxio
[no charge] com.roxio.TDIXController (1.2) [click for support]
/ System/Library/Extensions
[no charge] com.leapfrog.driver.LfConnectDriver (1.0.1) [click for support]
[no charge] com.ragingmenace.driver.SideTrack (1.6) [click for support]
Launch officers: (Does that mean?)
[loading] com.google.keystone.agent.plist [click to support]
Launch demons: (Does that mean?)
[loading] com.adobe.fpsaud.plist [click to support]
[operation] com.fitbit.galileod.plist [click to support]
[loading] com.google.keystone.daemon.plist [click to support]
[loading] com.leapfrog.connect.shell.plist [click to support]
[operation] com.mackeeper.AntiVirus.plist [click to support]
[operation] com.mackeeper.MacKeeper.plugin.AntiTheft.daemon.plist [click to support]
[loading] com.macpaw.CleanMyMac3.Agent.plist [click to support]
[operation] com.ragingmenace.SideTrack.Daemon.plist [click to support]
User launch officers: (Does that mean?)
[operation] com.mackeeper.MacKeeper.Helper.plist [click to support]
[loading] com.macpaw.CleanMyMac3.Scheduler.plist [click to support]
Items in user login: (Does that mean?)
CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 4.app/Contents/MacOS/CleanMyMac 3 Menu.app)
Fitbit connect Menubar Helper Application (/ Applications/Fitbit Connect.app/Contents/MacOS/Fitbit Connect Helper.app of the menu bar)
Other applications: (Does that mean?)
[ongoing] com.Apple.XPC.launchd.oneshot.0x10000006.MemoryKeeper
[ongoing] com.Apple.XPC.launchd.oneshot.0x1000000e.EtreCheck
[ongoing] com.fitbit.GalileoMenubar.189152
com.mackeeper.MacKeeper.service.clean [loading]
[ongoing] com.macpaw.CleanMyMac3.Menu.11232
net.kromtech.MemoryKeeper.60832 [loading]
net.kromtech.MemoryKeeper.Launcher [loading]
Plug-ins Internet: (Does that mean?)
o1dbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [click for support]
Unity Web Player: Version: UnityPlayer version 3.4.2f3 - SDK 10.5 [click for support]
Default browser: Version: 601 - SDK 10.11
Silverlight: Version: 4.0.50917.0 [click for support]
FlashPlayer - 10.6: Version: 20.0.0.267 - 10.6 SDK [click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 20.0.0.267 - 10.6 SDK [click for support]
googletalkbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [click for support]
iPhotoPhotocast: Version: 7.0
Center photo Plugin: Version: Photo Center Plugin 1.1.2.2 [click for support]
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [click for support]
JavaAppletPlugin: Version: 15.0.1 - 10.11 check the version of the SDK
User Plug-ins internet: (Does that mean?)
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [click to support]
Safari extensions: (Does that mean?)
Adblock more
3rd party preference panes: (Does that mean?)
Application Enhancer
Flash Player [click for support]
SideTrack [click for support]
Time Machine: (Does that mean?)
Mobile backups: OFF
Automatic backup: NON - automatic backup disabled
Volumes to back up:
Swope MacBook: Disc size: 249,20 GB disc used: 151,93 GB
Destinations:
Backup [Local]
Total size: 499,76 GB
Total number of backups: 27
An older backup: 01/15/13, 23:03
Last backup: 12/19/15, 03:12
Size of backup drive: adequate
Backup size GB 499,76 > (disc 151,93 GB X 3)
Top of page process CPU: (Does that mean?)
6% WindowServer
kernel_task 2%
0% fontd
0% CleanMyMac 3 Menu
0% MemoryKeeper
Top of page process of memory: (Does that mean?)
670 MB kernel_task
442 MB softwareupdated
Safari of 328 MB
311 MB AntiVirus
213 MB com.apple.WebKit.WebContent
Virtual memory information: (Does that mean?)
439 MB of free RAM
7.82 GB used RAM (3.70 GB being cached)
Used Swap 0 B
Diagnostic information: (Does that mean?)
4 January 2016, 18:49:41 self-test - spent
If you read the report you notice there is nothing on the battery. Do not post these reports unless you have been asked to do or have a problem identified in the report for which you need assistance.
Your battery information is reported in the power section of the information system located in your Utilities folder. Monitor user activity to see if you can identify any process consuming a lot of time processor.
Before Mavericks
Open the activity monitor in the Utilities folder. Select all processes in the drop process . Click the % CPU column heading twice to display in descending order. If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar. Click the force quit button to kill the process. See if that helps. Don't forget to mention the name of the runaway process, so you can find the cause of the problem.
Mavericks and later versions
Open the activity monitor in the Utilities folder. Select all processes in the menu display . Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order. If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar. Click the force quit button to kill the process. See if that helps. Don't forget to mention the name of the runaway process, so you can find the cause of the problem.
Reinstall OS X or do run these items:
Try these in order to test your system after each see if it is back to normal:
1. a. reset the PRAM and NVRAM on your Mac.
b. Macs with Intel processors: reset of the controller (SMC) system management
2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:
HD recovery start: restart the computer and after the buzzer, press on and press and hold the
COMMAND and R keys until it appears the Utilities menu screen.
3 fix the hard disk and permissions: select startup drive in the Utilities menu utility. Fix the hard drive and the permissions as follows.
When the recovery menu appears, select disk utility and press the continue button. After loading disk utility select it
back from Macintosh HD entry of the list on the left. Click first aid button in the toolbar. Wait for the operation
ends, then quit disk utility and back to the main menu.
4 reinstall OS X: restart from HD recovery Select reinstall OS X from the Utilities menu, then click on the continue button.
Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.
Maybe you are looking for
-
Startup problem: the status bar crashes at 3/4
MacBook Pro 13 "mid 2012 10.11.5 OS 8 GB memory 2.9 GHz IntelCore i7 Startup gives me the login screen and once I enter the password, it starts to load. When the status bar gets about 3/4, the screen begins to blink and a white wheel appears below th
-
I type a web address correctly. Firefox then changes the address to another site.
After you type and enter the correct address of a secure government site that I visit frequently, Firefox started today to add in additional address ".csda." and tries to access the new site data.The new site does not load, and Firefox returns the er
-
Spotlight search does not turn off
I tried have disabled in general settings and it says its odf, but he won't let mt screen
-
Hi, im using the myDAQ examples of audio device, I built a vi, with sampling rate of 22.05 K and 220.5 K samples, so the sampling time is 10 sec, when sampling is done he writes the wav file and shows the signal on the waveform table, i ' v added a w
-
Blue screen IRQL NOT LESS or EQUAL, stop 0x0000a
I have a user on occasion and not all the time but when it docks / untie his Dell Latitude D630 from the duplicator it blue screens. Message is a level IRQL LESS or DIFFERENT with a stop 0x0000a code (0 x 00760079 0 x 00021600) Any thoughts?