No visible path

Similar Questions

• No visible path Pen - Illustrator CS4

  Hi all

  I am a relatively comfortable user of Illustrator - but earlier I've encountered a problem that my stylus path is not visible because I draw. When objects are selected with the Selection tool or the direct Selection tool, the outline of the path is not made available to select. All I get is a generic covering with the selection tool - with the direct Selection tool, I get nothing.

  I scoured the preferences of the user for some hidden settings - all I can think is that I mashed the keyboard in a strange and wonderful way that did happen suddenly.

  Pointers or help would be very appreciated.

  Display > display the edges

• Visible paths

  My lines are visible when you view the fla file, but disappear when you look at the swf file. In fact, I want to see them in the finished product. How do I do that?

  Create a new layer - copy the images of your motion guide layer and paste them into the new layer. Make sure that the new layer is normal and not a "guide".

• Path Bar - recovery bridge - need to re - click on display every time?

  Is it possible to make the bar always visible path?

  Whenever I raise the bridge it is gone, and I have to go to the window > path every time - bar even if I save it as showing in a personalized workspace - is this a bug?

  Bridge 3.0.0.464

  This isn't normal behavior, it happens sometimes that the path bar

  disappears that it itself, but certainly not all the time that restart you.

  I would say you restart Bridge by pressing the option key and click

  update preferences in the menu that appears. Set preferences again to

  your wishes and give him another chance.

  Is it possible to make the bar always visible path?

  Whenever I raise the bridge it is gone, and I have to go to the window > path bar

  every once - even if I save it as showing in a personalized workspace - is this a

  bug?

  Bridge 3.0.0.464

• First Pro CC 2015.2 W10 Crash

  Hello

  We just started to work with all new HP Zbook 15 portable computers with an installation of Windows 10 fresh and up to date. OneDrive is installed on all computers connected to Office365 E3 useraccounts and portable.

  With the help of the redirected folders, we make that user profiles are redirected in the user his folder of a drive. For example, the desktop of the user "Username" is located on the following location.

  C:\Users\"username"\OneDrive - company utilisateur\Bureau

  All programs, including Adobe, work fine, except the first Pro CC 2015.2. During startup, the application crashes by referring to "C:\Program Files\Adobe\Adobe Premiere Pro 2015\dvaui.dll CC". When I launch the application with a local user without the redirected folders first starts normally.

  From my point of view, it seems that a nessesary folder is missing. When I check the common records such as appdata and documents all excists records and are created very well. For example the below files

  C:\Users\"username"\OneDrive - company Name\Documenten\Adobe\Premiere Pro\9.0\Profile-"Username"

  C:\USers\"username"\Appdata\Roaming\Adobe\Premiere Pro.

  Can you tell me what I'm missing?

  I'm completely lost on this topic.

  Problem is solved. There was a difference in path of profile between the visible path in windows Explorer and the settings in the registry. Strange thing is that Adobe Premiere has been made by the present. Everything works fine now.

• Pen Tool - Look way clearly

  As in the photo that I wrote. How can I change the color of the line of the same color in CS3. I try in CS5, CS6 trial, but the color of the line not even in CS3

  

  Thank you Trevor.

  I've used both CS3 and CS6 in the same laptop computer. I found the problem with my solution: simply uncheck 'Use graphics processor' . I don't know why, but I think it's my VGA ATI card problems. You see the line of more visible path. (his show more color in the path)

  When Checked "use chart Processoer ' willingness to see this gray color in the line:

  

  So I think my problem is solved.

  Thank you all

• Need help for the button to trigger on the text caption effect

  Hello world

  I work in

  

  on a Mac (chart below)

  

  I'm very new to Captivate (only my second week), but am familiar in other Adobe programs. I'm trying to get a dynamic object that I made in a button to trigger an effect on a text caption. I scrolled the forums here and tried various things of the advanced actions for just using the drop down menus in the property inspector and nothing that I tried gives me the result I want.

  Here is a screenshot of what I'm working with.

  

  What I want to do is for the arrows for the buttons (and they are currently). When the slide appears first I don't want that image and the arrows visible. So when the user clicks on the arrow, I want the effect I chose (spiral) that will be triggered with the corresponding text.

  Looks like my property for each caption Inspector (the names are different for each)

  

  And I also tried to write a few advanced Actions that follow as well as tutorials that I found online, and nothing gives me what I want.

  When I preview the slide I can see everything on entry and then when I click the button to apply the effect. I rechecked the advanced actions and usually when I try these nothing happens at all.

  Is - it there anyway that I can get that works this way, I'm wanting. It seems that it should be simple and I'm right on it.

  The shape of buttons are all pause at this moment, it's OK.

  I just tried it out and see what you mean. The text is there from the beginning, and that shouldn't be the case. you expect it not to appear when the button is clicked. I have never used this spiral effect myself, but since you have no control over it, I mean you can't see where starts the effect at all, there is no visible path you have with the other effects of the entry. Either, you need to create a custom, effect whose path begins with text outside the scene, or a combination of an Alpha to + a standard entrance effect.

  Tried the first one with a simple left to a straight path. I edited the paths so that they all start at the same position horizontal and end at the same horizontal position. So happy with the leaders and Guides that we finally got in Captivate, they are very useful for this type of design:

  

  It's the chronology:

  

• How to draw a circle with filling

  It is probably the easiest question you have today, so enjoy!

  I am trying to create a simple circle with filling (Yes, I know. Easy). So, I used the Ellipse tool and set the fill to blue. (below). The problem is the filling doesn't fill all the way up to the border and there is a grey border around it.

  I really, really want just a beautiful blue circle... is - too much to ask...? (* sniff *)

  Thanks in advance!

  

  Hello

  It looks like to your see the path of the ellipse.

  If you go to the Trace Panel, you can click under the path in the Panel to hide the path.

  What version of photoshop are you using?

  Visible path

  

  hidden path

  

• Road economy feather

  Hi, just for example when im using the Laso tool I can save my selection and when I'll need again just go to channels and select it. How could I save my way of pen?

  Make sure that your creation of a new road. Have the visible path palette and click the new path then the current path should not be visible. Otherwise if create you a new path, it is likely to be added to the current path. Consult the RTA the State of all right of the icons in the options bar. The control that wat paths are added to the current path.

• Log writer waiting & buffer waiting for busy

  Hello
  
  Version 10.2.0.3
  
  I have a problem with a database of buffer high waits and log file sync waits top 5 events of the awr report. I noticed that recovery logs are stored in a partition of san. Not sure why they did it. Is that should store online redo logs in partition san? Please advice.
  
  Thank you
  PAVN

  In your first message hear buffer waits and log file sync waits.
  Now, you have two servers, a huge amount of e/s and nothing on buffer waits and log file sync waits a little towards the bottom of the list.

  Your IO subsystem is completely overload on server B - and it's probably because he's overloaded while updates remotely can get lock wait time (60 seconds by default, I beleve) on ServerA.

  Takes care to do much with the LOBs. In your case, it seems that you have them declared nocache logging at both ends - which helps explain the direct reading and the Scriptures.

  A few oddities - no direct visible path did not write on A - that suggests she is faced with the direct path writes using asynchronous methods, but hide the impact as a result. The other server that b shows a lot of written direct path (overloaded, perhaps not on async) AND direct bed - why re-read you LOBs on B (possibly something on the way your code is written them).

  A strategy to ease the burden - make the CACHE of the LOBs (but assign to a reasonable size RECYCLE cache or cache for a non-standard block size). If you can keep them cached for a few seconds, you will not have to make him reread you migrate them - reduce your total I/O.

  HW argument - it's a bit a classic with the LOBs (it's space allocation as the segment grows - displacement of high waters). There are a few bugs with LOBs and SAMS tablespaces that could be behind all this - check for your version of Oracle Metalink. Log File Sync - at the moment there not that much, you can do it if they are large, written on a strongly hammered system.

  Server B - too much I/O: check where it goes - maybe it's the code LOB management but seek other sources explain the db file sequential reads and read by another session - maybe you have too many readings of scattered files db passes as well.

  -Check the SQL sorted by readings and Segments by physical i/o for clues. There are probably a few heavy hitters.

  For transfer between systems (although it will probably not help) you could look on Configure SQL * Net components (SDU TDU, tcp/ip frames Jumbo, tx and rx pads) take care of pumping LOB size data through the link.

  Concerning
  Jonathan Lewis
  http://jonathanlewis.WordPress.com
  http://www.jlcomp.demon.co.UK

  "All experts it is a equal and opposite expert."
  Clarke

• When searching from a finder window, why are there no visible file path bar? Is where you enter something in the search engine.

  When searching for a finder window why don't the path bar of file at the bottom of the window disappears. Y at - it anyway to stay visible.

  Of course, I would like to know where the file or folder is where spotlight shows its conclusions. Is there a preference I need to change to make the default action to be one in which the path to the file still appears at the bottom of the finder window?

  Sorry, I discovered my problem. I didn't have a file selected in the list. As soon as I made the path to the file appears. Duh!

• Is there a way to make the vector lines (Path) more Visible in Photoshop CC on OSX?

  Is there a way to make the vector lines (Path) more Visible in Photoshop CC on OSX? Just passed from the CS6 in the CC, and it is very difficult to see when they are in fact seen visible.

  Apart from excellent advice from Terri, there is no way to really change how the paths appear - nevermind, I could use those more visible as well.

• Is there a way to make the pen tool anchor points or paths of more visible selection.  Either clearer or wider. It is very difficult to see.

  I'm rather new to Photoshop CC.  I have anchor points see difficulties and selection paths, contours.   I don't see an option in the system menu to change these.   Any help is appreciated.

  Unfortunately, no. It would be very nice!

• Paths created in PS CS5 and saved in a PNG format are not visible in PS CC

  I recently upgraded from PS CS5 PS CC. I noticed that paths created on images in CS5 will not display when the same images (saved as PNG) are open in PS CC. In addition, pathed images and recorded (in PNG) CC do NOT show the path is available once the backup is complete. Is it a PNG setting I'm missing? I used the same ones I used in CS5. Paths to other file formats do not appear to be carried out.

  Thanks in advance for your suggestions.

  Looks like you used to be able to record the paths in png on Mac only. But this feature has been removed in CS6. Here is the response from Chris Cox on similar issues:

  Photoshop CS5 would save some additional data in the resource fork, on Macintosh only, outside the normal file format data.

  Photoshop CS6 does not only and only put a few icons/thumbnails in the range of resources.

  Apple away ranges of resources (give up another competitive advantage), then we must also do away with resource forks.  This isn't a bug, it's just the reality, that we face trying to support MacOS.

  PNG format does not support data path, or most other metadata of image - just image data, metadata and color profiles very minimal.  This isn't a bug, it's just the nature of the PNG format.

• Path of the file Visible when I hover over the Images

  Hello

  I converted a PowerPoint document in PDF format. The PowerPoint includes images (GIF, JPEG). When I move my cursor over the image in the PDF I created, I see the path to the file C:\User\User Name\Photo\File Name.JPG.

  Is there a setting in the PDF file that I can "unselect" so I do not see the path of the file when I hover over the images?

  Thank you

  MindForge

  Please try the suggestions mentioned here: http://forums.adobe.com/message/3364072#3364072

  Kind regards

  Deepak