No wifi connection with Windows 8.1 on Lenovo Flex 2-14

Similar Questions

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• Problem with WiFi connectivity in windows 8.1

  Hello

  I have problems with my Wifi on my HP Pavilion 15 Notebook (product number: G2H02PA-#ACJ)
  I have Windows 8.1 as well as Ralink RT3290 802.11bgn Wi - Fi adapter.
  
  My Wifi connection says LIMITED connectivity. I've already complained about my problem on the HP support by phone. But I don't have any solution for my problem. Technician a driver wifi re-installed and the Bios but did not get any solution. Customer support sent me some links to update the driver but not got any solution again.
  I tried to install different versions of drivers for card Ralink WLAN ! Still without success!
  I am writing this post from my other laptop that my wifi router running on other devices!
  
  Pending a solution so that I can use internet on my new laptop computer.
  
  Thanks in advance for any solution.

  I also had this problem and corrected.

  To correct the problem of wifi... open charms bar... in the search window, type device manager in Device Manager... double click network adapters, right-click right on... Qualcom Atheros QCA 9565802.11b/g/n wifi adapter... right click and click on uninstall.

  A pop window should open asking you to confirm. Confirm by clicking on... Ok.

  After that, restart your laptop.

  Your wifi should be visible in the networks. You can then connect to your network of your choice.

• WiFi is not connecting with Windows 10

  Just bought an Inspiron 14 with 10 Windows, and I can't connect to my WiFi.  Yes I have tried many 'solutions' I found online, and none of them work.  My network is visible, the signal is strong, I have entered the correct network key and the computer begins to go through the login process (renewable circle dot).  Finally, he stops and says that the connection cannot be established.  All other devices I tried to connect to this network connects without any problems.  Is this a problem of Windows 10?  All the solutions out there?  Thank you.

  Thanks for your suggestions.  I was able to solve the problem by logging in using the router WPS button.  I tried to connect by entering the network password, which for some unknown reason, has not worked.  So if anyone has this same problem with a new device running Windows 10 I would say you are trying to connect with the router WPS button.  Also, once I have plugged automatically kept Windows my network news, and now I connect automatically on startup.  Thank you.

• Connection limited WiFi issue with windows 8 Pro

  Hey everybody,
  I upgraded my windows yesterday from 7 to 8. I'm excited about it, but I have some problems with WiFi connections. Whenever my WiFi signal drops up to 3 bars, it says "connection is limited. I'm really frustrated please help!
  PS: My all drivers are up-to-date.

  Manufacturer: Acer
  System model: Aspire 5742

  NICs: Broadcom Netlink (TM) Gigabit Ethernet

  Microsoft Kernel Debug network adapter
  Qualcomm-Atheros AR5B97 Wireless Network adapt
  Should I change my network cards? If so, that we agree to my laptop? And where can I download it?

  Kind regards
  Tahir Rezhwan

  Hello

  I recommend you to reinstall the drivers of network and then re - configure network settings and check if it helps.

  Refer to the steps in the following Microsoft article.

  Wireless and wired network problems: http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-8&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

• NO QualcommAtheros AR9485 connection with Windows 8.1

  When I installed Windows 8.1 (64-bit) on my laptop a Pavilion G7 2272ED my drivers Ethernet and WIFI are correct working but I can not connect with internet with WIFA as well with Ethernet.

  I must go back to windows 8 (64-bit) and everything works fine.

  What is the problem and how can I solve this problem.

  HI Pvbaak,

  Nothing wrong. When you upgraded to win 8.1, it may be the cause.

  As you can see in the Microsoft community discussions

  w.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductDetailsViewer?Name=Qualcomm Atheros AR9485 Wireless Network adapt & vendor = Qualcomm Atheros & Type material = & tempOsid = + 8.1 Windows

  You can use the new QualcommAtheros AR9485 victory 8.1 driver, he could solve the problem

  Driver - http://download.lenovo.com/consumer/desktop/h1100408.exe

  Even if it's on another page, the driver should work, release date is 16.Oct.2013, it is the most recent.

  Download, install, reboot.

  GOOD LUCK, good luck!

  ***
  * Click on the star of CONGRATULATIONS on the left say "thank you."
  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

• Blurred printing 276dw wifi connection to Windows 8.1 update 1

  I have a 276dw connected to a large LAN home network with wifi.

  The individual workstations are connected to the wireless router, ethernet cable, portable computers connect to wifi. All of the machines in question are running Windows 8.1.

  The 276dw is perfectly visible on the network and connects very well. However, when I print from Windows (for example, the word 2013) prints out truncated, often missingthe last few pages of a multi-puage document.

  At one point, I found some instructions that allowed me to remove the printer as it has been installed by means of the own HP and Windows IP settings installation software manually. This enabled the SCART to PRINT correctly; However, I wasn't able to use the HP software to access the scanner. UH... not so great?

  So I just ran the installation again, thinkiong the problems would have probably gone now--only they don't have. And, unfortunately, I can't find the hack I used to get the machine before!

  Can someone tell me what the devil is going on? Running an HP printer can ' ^ t be hard!

  If your router's Ethernet cable connected to the printer, then you should be using the normal installation of the cable network of the installer option.  You use the wireless installation option only when you connect directly to the car radio wireless network printing and without the assistance of the network home.  Ignore wireless for now.

  If you are able to get the installation to complete, but it breaks later, then your printer may lose the network connection with your PC.  A quick and easy way to improve something as it is to assign the printer a static IP on your home network address.  A static IP address is one that never changes and is outside of the normal DHCP pool of addresses automatic IP supported by your router.  This way you can avoid your router by automatically assigning an IP address different than your computer has previously been referancing.

  Try to assinging a static IP address and see if it improves the situation.  We can dig through the logs from there if necessary.

• Problems of Internet connection with Windows CE 6.0

  original title: frustrated

  I have a netbook with windows ce 6.0 and I tried each troubleshooting method that could think about my internet provider which is clear. The problem is when I'm at work I can use wifi there without any problem, but at home I can't all internet so the end result is clear wireless telling me that they do not support windows this. I know I'm not the only one with windows this or the one trying to get on the internet.

  Hello

  ·          You use a router to connect to the internet?

  ·          If Yes, have you tried if internet connection work when it is connected through an Ethernet cable?

  Question suits you best in the MSDN forums.

  http://social.msdn.Microsoft.com/forums/en/category/EmbeddedWindows

  Diana

  Microsoft Answers Support Engineer

• How to solve error 1075 the dependency service does not exist or has been marked as deleted by sharing my internet conection as temporary ad - hoc wifi connection? Windows 7

  For 6 months I have been successfully using my based ad hoc temporary internet connection wifi connection to aid Assistant ICS (internet connection sharing) on my computer laptop windows7, but last night my microsoft security essential antivrus detected and removed Trojan win64 sirefef. "" B and after that, I have this error 1075 "the dependency service does not exist or has been marked as deleted" whenever I tried to make the new ad - hoc wifi based connection to share my main internet connection for my other devices

  I was looking for a response, and since I met the same sirefef of virus variants. (x), after the removal of virus, that I remembered the place, that he has done.

  C:\WINDOWS\Microsoft.NET\assembly\GAC_MSIL

  As a solution, I think that if a system component is damaged I shuould fix first.

  In fact, I did a full upgrade to Windows 7 (build even) with the OS DVD.

  I must mention about the extraordinary capabilities of Windows 7 on the upgrade.

  After all the upgrade process which took about 2 hours to "Installation of Windows 7" discovered that .NET framework 4.0 is damaged and repaired. And I could start ICS.

  Without all this hassle if you could try to reinstall .net Framework 4.0, I think that this problem will disappear.

• WiFi connection limited Windows 8.

  Hello

  Since yesterday I can not connect to my wireless internet. It keeps showing 'limited connection '. It shows it on my laptop, 2 other laptops in this end of housework and my two phones will work perfectly on WiFi connection. My phone is a Samsung ATIV Book 4. With Windows 8. Network adapter: Intel Centrino Advanced - N 6235. I've had it before and rinse my ip / dns worked. Does not work at the moment. All the commands prompt cmd and none work because of "access denied" trying even if I run it as administrator. Or reset by turning the power switch router does not work either.
  Thanks in advance!

  There are a few problems with this wifi adapter that Intel strives to difficulty.  They have recently published an updated for her driver.  Can you try to install the updated driver and see if it solves your problem?

  Drivers for Intel Centrino Advanced-N 6235

  On this page, you will see 4 download options; two are for 32-bit computers and two for 64 - bit.  I think the Samsung ATIV Book 4 you have is 64 bit, but you can check by pressing on + Pause/break on your keyboard and the popup will tell you.

  Therefore, I recommend that you download the driver with the name of the Wireless_16.7.0_e64.exe file that will contain the driver and system of wireless configuration of Intel they call "Pro/Set.

• Loss of internet connection with windows 8

  I bought recently (in the last 3 months), a desktop HP 110 and a Dell desktop all-in-one computer.  As long as windows 8 and I use ATT Uverse to provider for my network.  I also have a Microsoft Surface with windows 8 as connected to the network.

  On the desk tops HP and ell I keep giving up network and restart the computer to restore the network connection.  It can happen at any time during the operation. I had AT & T technicians come out mind 3 times he stood not a replacement and all the equipment and lines.  I HAV had computers swept for viruses, malware, etc. twice.

  Only the compatibility between 2 computers is windows 8.  Is this a problem of windows 8?

  Hello

  Suspect network drivers, although other factors may be in play and it
  the problem is probably a combination of factors. Don't forget to check with
  HP and Dell Support, their documentation online and the drivers and ask
  in their forums on known problems.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  Dell PC Diagnostics
  http://www.Dell.com/support/Diagnostics/us/en/19/

  ===================================

  Free Wi - Fi and wireless problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note the use of Win Key + X and Win Key + W (to access control panel, run,
  and settings according to needs). Win + D key calls to the office and use
  Win Key activates / deactivates the desktop and start screen.

  --------------------------------------------------------------

  Control Panel - Network and sharing Center - solve problems

  References to Vista also apply to Windows 7 and Windows 8.
  
  Your router be guess here, you have successfully updated the firmware a possible
  solution? And I would update your WiFi drivers on computers. How far away are they
  you have set in the router? Are there obstacles in the path? (Are not
  Assume that even a new router firmware updated.)

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click
  top - tab of the driver - write version - click on update driver (can't do
  nothing that MS is far behind the certification of drivers). Then right click on the Wifi
  Device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Microsoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
  This section-> update the NIC driver).
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Drivers and Microsoft - Windows 8 - Hardware
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Microsoft - Windows 8 - why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Microsoft - Windows 8 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system Maker you can see the same device manufacturer
  more recent versions. (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other update
  Drivers Windows 8 like updated drivers.

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - set up a new connection or network

  -----------------------------------------------------

  And:

  TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
  http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/

  Microsoft - Windows 8 - Web & Networking
  http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8

  Microsoft - Windows 8 - Wi - Fi & Networking
  http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1

  -----------------------------------------------------

  Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Microsoft - Windows 8 - wired and wireless in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Unable to connect with Windows 10 WNDA4100!

  I just upgraded to Windows 10 about 2 days ago and as soon as I upgraded my network WNDA4100 adapter stop working. The LED lights is no longer when it is plugged. I went to the website NETGEAR and downloaded the latest firmware that says it's compatible with Windows 10. After I installed the firmware, I go to Device Manager and click Properties in the adapter and I get this error message:

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  {Unable to load device driver}
  HS device driver could not be loaded.
  Error status is 0 x %x

  I tried to run the installation of the firmware in 8 of windows compatibility mode that has been suggested by others, but it never ends installation. It does not lock to the top, but nothing ever happens. NETGEAR is not willing to help me a little bit because it is longer than 90 days, blah blah. If anyone has the same problem, I would be very happy to help. I am currently using a very long ethernet cord running from my living room. Really, I don't want to have to buy another card and with windows 10 being so new, idk this new adapter would work even.

  I just updated to Windows 10 and had a similar problem (driver works, but could not connect at 5 GHz). I dug through some forums and found problems similar to mine (and maybe yours?).

  This link has a great miracle possible reason as to why you are facing this problem.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-hardware/wnda4100-loses-5GHz-after-81-up...
  

  If you don't want to read through it, I will quote the details here:

• 4500 envy: Envy 4500 not WiFi connection with numere end

  (Same problem with my other laptop running Windows 7)

  through Wifi or with a USB cable (drivers custom ' settle)

  Installed with disc or by download, same problem

  Can not install printer on laptop computers.  Get to the final stage, the last time I did all the things someone did on the same issue in type - uninstalled software, reset wifi on printer, router disconnected, boot etc... did not fix it.

  Error message: 0 x 00000643 by using the control panel, add the printer on Vista method

  Install the software,

  Ask me to add a new printer

  It found the printer on the network

  Network printer installation begins

  Error message - on two laptop computers, regardless of the method, never cross here

  -Unsuccessful network installation, this printer could not be installed on the network-

  Try searching for thing need that opens.  It does not solve it...

  Everyone?

  Hey @CandyCaneLane,

  Thanks for getting back to me on this subject.

  Because you get the message "the driver for WDF device Print is not installed" under the heading adding printer, it would seem that the packet driver HP full software functionality is not used, even if you have already attempted an install disk with the download. Can I please you follow the steps below.

  Please make sure that the USB cable is disconnected from your printer to your computer.

  Step 1: Remove the device:

  It is crucial for the repairs we have a clean slate to work with. So, I'm going you have to make sure every trace of your HP Envy have been removed from your computer, before installation. Perform the following steps on your computer Windows Vista and Windows 7.

  1. Click on the Start menu
  2. Select all programs
  3. Click the HP folder
  4. Select your HP Envy
  5. Select Uninstall
  6. Please follow the prompts on the screen to complete the uninstall
  7. Click on the Start menu
  8. Select the devices and printers
  9. If you see your HP Envy listed, please right click top and select "remove device' or 'Remove'.
  10. Once the device HP Officejet was deleted please click left once on any device used to indicate the heading Printers and fax machines . You just want to highlight the device
  11. Then click on the print server properties at the top
  12. Under the print server properties, click the drivers tab
  13. If you see your HP Envy pilot showing under the list please click on it. Then, click Remove. Click remove the pilot from the box pop up
  14. Click OK
  15. On the print server properties window, click apply and OK
  16. Close Devices and printers

  Step 2: Remove temporary files:

  1. Click on the Start menu
  2. In the box "search programs and files" located just above to start after you click on it, type %temp% , and then press enter on your keyboard
  3. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  4. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  5. Close the Temp folder when it is empty
  6. Right-click the recycling bin on your desktop and select empty recycling bin

  Step 3: Install the device:

  1. Please click here to download the latest package Full Feature Software and Driver for your HP Envy
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. Choose the installation by the network
  4. Once the installation is complete on your Vista and Windows 7 computers please test print and scan to confirm functionality

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• Internet connection with Windows XP, SP3 and Airport Extreme - the status is always "absorbing network address.

  My Airport Extreme connected my IMac immediately, but I am not able to connect on the side PC. Airport utility does not 'no matter what Airport wireless devices". When you check the status of the internet connection with PC tools, the correct network is indicated and shows an excellent signal strength. The status is: "absorbing the network address. However, nothing happens.

  Under 'Repair the wireless network connection', it shows, "Windows is taking the following steps: your IP address renewal" even once, nothing happens.

  Under hardware I show Atheros Wireless Network Adapter and the mention: "this device works correctly.

  Yet, no network connection. Any help will be greatly appreciated.

  Hello

  Keep the changes and open the wireless. For example, to disable security in the router (turn on when to managed to connect).

  You can also try the wireless in a friends house, or an Internet café to get a frame of reference for this behavior elsewhere.

  -------------------

  Wi - Fi in general.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled).

  If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Problems of connectivity with Windows Messenger.

  The next person is online, but couldn't participate in this conversation:

  Once in awhile I have trouble to sign in our office group, the other 2 in the office are able to connect, but somehow, I get this pink screen that is Windows Live (I think that if has anything to do with hotmail messenger?), but when this screen appears, I end up having a wire connection trouble. then when I finally find the window that I use - I get this message "the following person is online, but couldn't participate in this conversation:" it's so weird - I can't even answer how I finally corrected the last time this happens because I'm end up doing all sorts of things until I finally somehow end up getting?  A lot of times I don't even try to connect until I see that at least someone else is signed in question, if I connect me before that - I end up getting that pink windows live screen which ends up screwing everything up. Please help-

  Anita Sorensen

  Lloyd Bultsma Trucking

  Group name: lloydbultsma trucking

  If you have any problem with Windows Live Messenger, it is up to the solution Center Windows Live Messenger Forums - Messenger discussions section:

  http://windowslivehelp.com/forums.aspx?ProductID=2