Node Manager or the administrator of the server - which one to start first?

Similar Questions

• Steps to install and configure Node Manager on the local machine and remote

  Hello
  
  I'm using WLS 10.3 on Windows.
  I did the following till now.
  
  (1) installed WebLogic 10.3 on one machine (local computer, on which I created the field and my Server Admin is under execution. 1 managed server is also created on this machine).
  (2) installed WebLogic 10.3 on computer B (remote computer, which Managed Server 2 will be created).
  (3) on the machine, I used the Setup Wizard and create a domain. When creating the domain, I did the following:
  (i) created two managed servers.
  (II) create a cluster
  (III) the servers assigned to regroup.
  (IV) created two machines.
  (v) the servers assigned to machines (Admin Server and MS_1 to the machine and MS_2 machine B).
  
  (4) start Admin Server.
  (5) on the administration Console, I made some configurations for the node Manager on Machines-> Machine A-> Node Manager. The assigned values:
  (i) type (SSL)
  (II) Address (ip_address machine A) listen
  (III) listening port (5556)
  (6) in the same way it did for Machine B.
  
  So far, phsically the managed server (MS_2) directory and configuration is not there on the Machine B (its only configured on A computer because I created the field on computer A).
  
  I went through the documents on the Node Manager and found what to configure. But I have not found what is the sequence of configuration.
  
  Please let me know the sequence of steps I must follow to install and configure the Manager of nodes on the local and remote machine. I want to use Java Node Manager (not the Script node Manager).
  
  Thank you
  
  Sanjay

  Hello Sanjay

  Basically if I understand your question, you have A machine where you had installed ""(permet de supposer admin serveur) and "VAS_MS1_A VAS_ADM_A" (lets assume the managed server.» And on the second machine B you want to create a managed server 'VAS_MS2_B' which must be controlled by node manager, so that you can start console, auto restart the managed server and perform other activities such as the migration of servers using nodemanager. If this is correct, this is the sequence of steps.

  Since you say you are on windows, I start from the principle

  WebLogic version 10'3
  BEA_HOME:-c:\bea
  WL_HOME:-C:\bea\wlserver_10.3
  DOMAIN_DIR:-c:\VASDomains

  Machine has

  (1) install the BEA.
  Using 2 Setup Wizard) create the domain under "c:\VASDomains".
  (3) to start the Admin Server and connect to the console and create two machines "Machine_A" and "Machine_B". Select the types of machines as 'other '.
  (4) once machines are created go to each machine and go to the tab 'NodeManager' and enter the details nodemanager.
  (5) create server 'VAS_MS1_A' and 'VAS_MS2_B '. Enter the respective details. To "VAS_MS1_A", enter a machine name of host or ip and machine "Machine_A" and "VAS_MS2_B", enter the hostname of the machine B or ip and machine 'Machine_B '.

  Machine B

  (1) on this machine install BEA
  (2) then you have to register the machine with the Manager of nodes. So for this first set the environment go to "C:\bea\wlserver_10.3\server\bin" and run "setWLSEnv.cmd". Then type 'java weblogic. Enter the WLST", once you run this command at the next prompt Details ' connect ('', 'adminserverpassword','t3: / / adminserver:port" ")
  (3) then run this command.
  nmEnroll('c:/VASDomains','C:\bea\wlserver_10.3\common\nodemanager')

  Orders above fits machine with nodemanager. The first parameter is "domestic field", now if you see "c:\". ' directory 'VASDomains' will be created. Second parameter is nodemanager House, now if you go into nodemanager houses that some properties will be updated.
  (4) If this node Manager runs on this computer, kill that one and restart the node Manager again.
  (5) now if you go to "Adminconsole--> Machines--> Machine_B--> Monitoring" you can see the status as accessible.
  (6) now you can go "Servers--> VAS_MS2_B--> Control" and start the server. Newspapers to see how the server gets up the tail.

  If you want more details on "nodemanager", dedicated to my 'vasweblogic.blogspot.com' blog, not a lot of messages but post nodemanager can help you.

  I hope that's what you're looking for, have a nice day.

  Naour Vijay.

• Extend the server TCP - could not start Service - Oracle coherence GE 3.5.2/463

  Hello
  We are about to go into production I see was able to start the TCP Service extend the server (disable storage node).
  
  Concerning
  DOCUMENTATION
  
  My gaze of Configuration as follows
  <? XML version = "1.0" encoding = "windows-1252"? >
  <! SYSTEM cache-config DOCTYPE "cache - config.dtd" >
  <>cache-config
  < cache-system-mapping >
  < / cache-system-mapping >
  <>- cached patterns
  < distributed plan >
  < scheme name > distributedCache < / system-name >
  < service name > distributedCache < / service-name >
  < support-map-plan >
  < local plan >
  HYBRID of <-eviction strategy > < / eviction strategy >
  < high-units > 500 < / high units >
  < bass-units > 375 < / bass-units >
  < Unit Calculator > BINARY < / Unit-Calculator >
  <-> 1048576 uniting factor < / unit factor >
  < / local plan >
  < / support-map-plan >
  < / distributed plan >
  < proxy-system >
  < service name > ExtendTcpProxyService < / service-name >
  < number > 15 threads < / thread count >
  < Acceptor-config >
  <>tcp-Acceptor
  < address - >
  < system-property address = "proxy.listen.address" >... < / address >
  < port system-property = "proxy.listen.port" >... < / port >
  < / local-address >
  < / tcp-Acceptor >
  < / Acceptor-config >
  < autostart > true < / autostart >
  < / proxy-system >
  < / cache-plans >
  < / cache-config >
  
  - And the journal looks like this-
  
  2009-12-04 16:21:54.056/25821.278 Oracle coherence GE 3.5.2/463 < D6 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptor, Member = 12): closed: Channel (Id = 193159068
  6, open = false)
  2009-12-04 16:21:54.058/25821.280 Oracle coherence GE 3.5.2/463 < D5 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptorWorker:4, Member = 12): repeat SizeReques
  t due to the redistribution of PartitionSet {220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242
  243, 244, 245, 246, 247, 248, 249, 250, 251, 252, 253, 254, 255, 256}
  2009-12-04 16:21:54.058/25821.280 Oracle coherence GE 3.5.2/463 < D5 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptorWorker:12, Member = 12): repeat SizeReque
  St due to the redistribution of PartitionSet {220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 24
  2, 243, 244, 245, 246, 247, 248, 249, 250, 251, 252, 253, 254, 255, 256}
  2009-12-04 16:21:54.058/25821.280 Oracle coherence GE 3.5.2/463 < D5 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptorWorker:11, Member = 12): repeat SizeReque
  St due to the redistribution of PartitionSet {220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 24
  2, 243, 244, 245, 246, 247, 248, 249, 250, 251, 252, 253, 254, 255, 256}
  2009-12-04 16:21:54.058/25821.280 Oracle coherence GE 3.5.2/463 < D5 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptorWorker:7, Member = 12): repeat SizeReques
  t due to the redistribution of PartitionSet {220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242
  243, 244, 245, 246, 247, 248, 249, 250, 251, 252, 253, 254, 255, 256}
  2009-12-04 16:21:54.175/25821.397 Oracle coherence GE 3.5.2/463 < D5 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptorWorker:10, Member = 12): an exception encountered
  Ed during the processing of a SizeRequest for Service = Proxy: ExtendTcpProxyService:TcpAcceptor: java.lang.InterruptedException (Wrapped)
  at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
  at com.tangosol.util.Base.ensureRuntimeException(Base.java:269)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForPartitionRedistribution (DistributedCache
  . CDB:107)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForRedistribution (DistributedCache.CDB:34)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.ensureRequestTarget (DistributedCache.CDB:15)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.sendPartitionedRequest (DistributedCache.CDB:31)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.size (DistributedCache.CDB:13)
  to com.tangosol.util.ConverterCollections$ ConverterMap.size (ConverterCollections.java:1470)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ ViewMap.size (DistributedCache.CDB:1)
  at com.tangosol.coherence.component.util.SafeNamedCache.size(SafeNamedCache.CDB:1)
  at com.tangosol.coherence.component.util.collections.WrapperMap.size(WrapperMap.CDB:1)
  to com.tangosol.coherence.component.net.extend.messageFactory.NamedCacheFactory$ SizeRequest.onRun (NamedCacheFactory.CDB:7)
  at com.tangosol.coherence.component.net.extend.message.Request.run(Request.CDB:4)
  at com.tangosol.coherence.component.net.extend.proxy.NamedCacheProxy.onMessage(NamedCacheProxy.CDB:11)
  at com.tangosol.coherence.component.net.extend.Channel.execute(Channel.CDB:28)
  at com.tangosol.coherence.component.net.extend.Channel.receive(Channel.CDB:26)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer$ DaemonPool$ WrapperTask.run (Peer.CDB:9)
  to com.tangosol.coherence.component.util.DaemonPool$ WrapperTask.run (DaemonPool.CDB:32)
  to com.tangosol.coherence.component.util.DaemonPool$ Daemon.onNotify (DaemonPool.CDB:63)
  at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
  at java.lang.Thread.run(Thread.java:619)
  Caused by: java.lang.InterruptedException
  at java.lang.Object.wait (Native Method)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForPartitionRedistribution (DistributedCache
  . CDB:96)
  ... 18 more
  
  2009-12-04 16:21:54.175/25821.397 Oracle coherence GE 3.5.2/463 < D5 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptorWorker:9, Member = 12): an Unknown exception
  d when processing a SizeRequest for Service = Proxy: ExtendTcpProxyService:TcpAcceptor: java.lang.InterruptedException (Wrapped)
  at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
  at com.tangosol.util.Base.ensureRuntimeException(Base.java:269)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForPartitionRedistribution (DistributedCache
  . CDB:107)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForRedistribution (DistributedCache.CDB:34)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.ensureRequestTarget (DistributedCache.CDB:15)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.sendPartitionedRequest (DistributedCache.CDB:31)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.size (DistributedCache.CDB:13)
  to com.tangosol.util.ConverterCollections$ ConverterMap.size (ConverterCollections.java:1470)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ ViewMap.size (DistributedCache.CDB:1)
  at com.tangosol.coherence.component.util.SafeNamedCache.size(SafeNamedCache.CDB:1)
  at com.tangosol.coherence.component.util.collections.WrapperMap.size(WrapperMap.CDB:1)
  to com.tangosol.coherence.component.net.extend.messageFactory.NamedCacheFactory$ SizeRequest.onRun (NamedCacheFactory.CDB:7)
  at com.tangosol.coherence.component.net.extend.message.Request.run(Request.CDB:4)
  at com.tangosol.coherence.component.net.extend.proxy.NamedCacheProxy.onMessage(NamedCacheProxy.CDB:11)
  at com.tangosol.coherence.component.net.extend.Channel.execute(Channel.CDB:28)
  at com.tangosol.coherence.component.net.extend.Channel.receive(Channel.CDB:26)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer$ DaemonPool$ WrapperTask.run (Peer.CDB:9)
  to com.tangosol.coherence.component.util.DaemonPool$ WrapperTask.run (DaemonPool.CDB:32)
  to com.tangosol.coherence.component.util.DaemonPool$ Daemon.onNotify (DaemonPool.CDB:63)
  at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
  at java.lang.Thread.run(Thread.java:619)
  Caused by: java.lang.InterruptedException
  at java.lang.Object.wait (Native Method)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForPartitionRedistribution (DistributedCache
  . CDB:96)
  ... 18 more
  
  2009-12-04 16:21:54.175/25821.397 Oracle coherence GE 3.5.2/463 < D5 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptorWorker:13, Member = 12): an exception encountered
  Ed during the processing of a SizeRequest for Service = Proxy: ExtendTcpProxyService:TcpAcceptor: java.lang.InterruptedException (Wrapped)
  at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
  at com.tangosol.util.Base.ensureRuntimeException(Base.java:269)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForPartitionRedistribution (DistributedCache
  . CDB:107)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForRedistribution (DistributedCache.CDB:34)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.ensureRequestTarget (DistributedCache.CDB:15)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.sendPartitionedRequest (DistributedCache.CDB:31)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.size (DistributedCache.CDB:13)
  to com.tangosol.util.ConverterCollections$ ConverterMap.size (ConverterCollections.java:1470)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ ViewMap.size (DistributedCache.CDB:1)
  at com.tangosol.coherence.component.util.SafeNamedCache.size(SafeNamedCache.CDB:1)
  at com.tangosol.coherence.component.util.collections.WrapperMap.size(WrapperMap.CDB:1)
  to com.tangosol.coherence.component.net.extend.messageFactory.NamedCacheFactory$ SizeRequest.onRun (NamedCacheFactory.CDB:7)
  at com.tangosol.coherence.component.net.extend.message.Request.run(Request.CDB:4)
  at com.tangosol.coherence.component.net.extend.proxy.NamedCacheProxy.onMessage(NamedCacheProxy.CDB:11)
  at com.tangosol.coherence.component.net.extend.Channel.execute(Channel.CDB:28)
  at com.tangosol.coherence.component.net.extend.Channel.receive(Channel.CDB:26)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer$ DaemonPool$ WrapperTask.run (Peer.CDB:9)
  to com.tangosol.coherence.component.util.DaemonPool$ WrapperTask.run (DaemonPool.CDB:32)
  to com.tangosol.coherence.component.util.DaemonPool$ Daemon.onNotify (DaemonPool.CDB:63)
  at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
  at java.lang.Thread.run(Thread.java:619)
  Caused by: java.lang.InterruptedException
  at java.lang.Object.wait (Native Method)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForPartitionRedistribution (DistributedCache
  . CDB:96)
  ... 18 more
  
  2009-12-04 16:21:54.175/25821.397 Oracle coherence GE 3.5.2/463 < D5 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptorWorker:11, Member = 12): an exception encountered
  Ed during the processing of a SizeRequest for Service = Proxy: ExtendTcpProxyService:TcpAcceptor: java.lang.InterruptedException (Wrapped)
  at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
  at com.tangosol.util.Base.ensureRuntimeException(Base.java:269)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForPartitionRedistribution (DistributedCache
  . CDB:107)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForRedistribution (DistributedCache.CDB:34)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.ensureRequestTarget (DistributedCache.CDB:15)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.sendPartitionedRequest (DistributedCache.CDB:31)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.size (DistributedCache.CDB:13)
  to com.tangosol.util.ConverterCollections$ ConverterMap.size (ConverterCollections.java:1470)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ ViewMap.size (DistributedCache.CDB:1)
  at com.tangosol.coherence.component.util.SafeNamedCache.size(SafeNamedCache.CDB:1)
  at com.tangosol.coherence.component.util.collections.WrapperMap.size(WrapperMap.CDB:1)
  to com.tangosol.coherence.component.net.extend.messageFactory.NamedCacheFactory$ SizeRequest.onRun (NamedCacheFactory.CDB:7)
  at com.tangosol.coherence.component.net.extend.message.Request.run(Request.CDB:4)
  at com.tangosol.coherence.component.net.extend.proxy.NamedCacheProxy.onMessage(NamedCacheProxy.CDB:11)
  at com.tangosol.coherence.component.net.extend.Channel.execute(Channel.CDB:28)
  at com.tangosol.coherence.component.net.extend.Channel.receive(Channel.CDB:26)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer$ DaemonPool$ WrapperTask.run (Peer.CDB:9)
  to com.tangosol.coherence.component.util.DaemonPool$ WrapperTask.run (DaemonPool.CDB:32)
  to com.tangosol.coherence.component.util.DaemonPool$ Daemon.onNotify (DaemonPool.CDB:63)
  at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
  at java.lang.Thread.run(Thread.java:619)
  Caused by: java.lang.InterruptedException
  at java.lang.Object.wait (Native Method)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForPartitionRedistribution (DistributedCache
  . CDB:96)
  ... 18 more
  
  2009-12-04 16:21:54.175/25821.397 Oracle coherence GE 3.5.2/463 < D5 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptorWorker:2, Member = 12): an Unknown exception
  d when processing a SizeRequest for Service = Proxy: ExtendTcpProxyService:TcpAcceptor: java.lang.InterruptedException (Wrapped)
  at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
  at com.tangosol.util.Base.ensureRuntimeException(Base.java:269)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForPartitionRedistribution (DistributedCache
  . CDB:107)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForRedistribution (DistributedCache.CDB:34)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.ensureRequestTarget (DistributedCache.CDB:15)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.sendPartitionedRequest (DistributedCache.CDB:31)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.size (DistributedCache.CDB:13)
  to com.tangosol.util.ConverterCollections$ ConverterMap.size (ConverterCollections.java:1470)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ ViewMap.size (DistributedCache.CDB:1)
  at com.tangosol.coherence.component.util.SafeNamedCache.size(SafeNamedCache.CDB:1)
  at com.tangosol.coherence.component.util.collections.WrapperMap.size(WrapperMap.CDB:1)
  to com.tangosol.coherence.component.net.extend.messageFactory.NamedCacheFactory$ SizeRequest.onRun (NamedCacheFactory.CDB:7)
  at com.tangosol.coherence.component.net.extend.message.Request.run(Request.CDB:4)
  at com.tangosol.coherence.component.net.extend.proxy.NamedCacheProxy.onMessage(NamedCacheProxy.CDB:11)
  at com.tangosol.coherence.component.net.extend.Channel.execute(Channel.CDB:28)
  at com.tangosol.coherence.component.net.extend.Channel.receive(Channel.CDB:26)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer$ DaemonPool$ WrapperTask.run (Peer.CDB:9)
  to com.tangosol.coherence.component.util.DaemonPool$ WrapperTask.run (DaemonPool.CDB:32)
  to com.tangosol.coherence.component.util.DaemonPool$ Daemon.onNotify (DaemonPool.CDB:63)
  at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
  at java.lang.Thread.run(Thread.java:619)
  Caused by: java.lang.InterruptedException
  at java.lang.Object.wait (Native Method)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForPartitionRedistribution (DistributedCache
  . CDB:96)
  ... 18 more
  
  2009-12-04 16:21:54.176/25821.398 Oracle coherence GE 3.5.2/463 < D5 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptorWorker:6, Member = 12): an Unknown exception
  d when processing a SizeRequest for Service = Proxy: ExtendTcpProxyService:TcpAcceptor: java.lang.InterruptedException (Wrapped)
  at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
  at com.tangosol.util.Base.ensureRuntimeException(Base.java:269)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForPartitionRedistribution (DistributedCache
  . CDB:107)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.waitForRedistribution (DistributedCache.CDB:34)
  :$
  2009-12-04 16:21:54.259/25821.481 Oracle coherence GE 3.5.2/463 < D4 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptorWorker:8, Member = 12): demon caught a unh
  andled exception (com.tangosol.net.messaging.ConnectionException: channel is closed) on the way out.
  2009-12-04 16:21:54.264/25821.486 Oracle coherence GE 3.5.2/463 < D4 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptorWorker:3, Member = 12): demon caught a unh
  andled exception (com.tangosol.net.messaging.ConnectionException: channel is closed) on the way out.
  2009-12-04 16:21:54.330/25821.552 Oracle coherence GE 3.5.2/463 < D5 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptor, Member = 12): stop: TcpAcceptor {Name = Pr
  Oxy: ExtendTcpProxyService:TcpAcceptor, State = (SERVICE_STOPPED), ThreadCount = 0, Codec = Codec (Format = POF), PingInterval = 0, = 0 PingTimeout RequestTimeout = 0, Local
  Address=[nybc94lxb01/10.12.101.81:21005], LocalAddressReusable = false, KeepAliveEnabled = true, TcpDelayEnabled = false, ReceiveBufferSize = 0, SendBufferSize = 0, Lily
  tenBacklog = 0, LingerTimeout = 1, BufferPoolIn = BufferPool (BufferSize = 2KB, BufferType = DIRECT, capacity = unlimited), BufferPoolOut = BufferPool (BufferSize = 2KB, Buffe
  rType = DIRECT, capacity = unlimited)}
  Exception in thread "Thread-2" java.lang.RuntimeException: could not start the Service "Proxy: ExtendTcpProxyService:TcpAcceptor ' (ServiceState = SERVICE_STOPPED)
  at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.waitAcceptingClients(Service.CDB:12)
  at com.tangosol.coherence.component.net.extend.Channel.request(Channel.CDB:10)
  at com.tangosol.coherence.component.net.extend.Channel.request(Channel.CDB:1)
  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer.closeChannel(Peer.CDB:18)
  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer.closeChannel(Peer.CDB:1)
  at com.tangosol.coherence.component.net.extend.Channel.close(Channel.CDB:20)
  at com.tangosol.coherence.component.net.extend.Channel.close(Channel.CDB:1)
  at com.tangosol.coherence.component.net.extend.proxy.NamedCacheProxy.run(NamedCacheProxy.CDB:30)
  at java.lang.Thread.run(Thread.java:619)
  Exception in thread "Thread-3" java.lang.RuntimeException: could not start the Service "Proxy: ExtendTcpProxyService:TcpAcceptor ' (ServiceState = SERVICE_STOPPED)
  at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.waitAcceptingClients(Service.CDB:12)
  at com.tangosol.coherence.component.net.extend.Channel.request(Channel.CDB:10)
  at com.tangosol.coherence.component.net.extend.Channel.request(Channel.CDB:1)
  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer.closeChannel(Peer.CDB:18)
  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer.closeChannel(Peer.CDB:1)
  at com.tangosol.coherence.component.net.extend.Channel.close(Channel.CDB:20)
  at com.tangosol.coherence.component.net.extend.Channel.close(Channel.CDB:1)
  at com.tangosol.coherence.component.net.extend.proxy.NamedCacheProxy.run(NamedCacheProxy.CDB:30)
  at java.lang.Thread.run(Thread.java:619)
  
  Published by: Anand Gupta on December 4, 2009 17:10

  There is also a property of system specific timeout set for the guardian for proxies:-Dtangosol.coherence.proxy.guard.timeout or you can change it in the configuration of the proxy service.

  Kind regards

  David

• Wamp server which could not start due to lack of MVCR110. DLL

  I installed a wamp server that failed to start due to lack of MVCR110. DLL. but later, I downloaded the MVCR110. Update the DLL and install and the application started successfully. But the apache installation failed due to lack of VCRUNTIME140. DLL. This is why, wamp doesn't. Please, help me. Thank you.

  This issue could if the Package redistributable Microsoft Visual C++ 2010 is not installed correctly.

  I suggest you to uninstall all existing Microsoft Visual C++ Redistributable Package and install the latest Microsoft Visual C++ 2010 Redistributable Package to check if it helps.

  Follow the steps below:

  Step 1: uninstall the exit Microsoft Visual C++.

  (a) press Windows key + x and select programs and features.

  (b) right-click on the Microsoft Visual C++ , and then uninstall it.

  Step 2: download the latest Microsoft Visual C++ and install it.

  See the link below:

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=40784

• 3 HTTP server. which one to choose?

  I installed db11gR2 and APEX updated to version 4 on my server Linux with EPG.
  
  There are 3 types of HTTP Server
  
  Oracle HTTP Server
  Embedded PL/SQL gateway
  APEX Listner
  
  I installed EPG, but after installing it, I found and I read that
  
  
  The EPG is practical for small configurations. The EPG is not recommended for the largest production scale use case or the Internet facing applications.
  
  and still
  
  For this reason, it is not recommended to use the PL/SQL gateway integrated for applications that run on the Internet. In addition, the embedded PL/SQL gateway does not provide the same flexibility of configuration and logging detailed as Oracle HTTP Server mod_plsql.
  
  So I'm wondering 'maybe I'm wrong and I had to install another one. "
  So, could someone tell me what the most appropriate access in a production company with 300 final and internet users, or pointing me a link where I can find info on this subject.
  
  Thanks in advance!

  Rosario,

  For Production environments using anything other than the EPG, it is safe. Which one? The answer depends on what skills you have and what are the infrastructure you already have in place.

  If you have a SST, for example, so also use Oracle Forms and Reports, then go this route because it is one oldest and most proven. But if you don't have OHS already then you can check if there is no involved license fees.

  ApexListener is the way to go if yours is a unique environment of the Apex. But with Apexlistener, you also need a Web server and you must choose among OC4J, Weblogic and Glassfish ARE if you want that support Oracle. Ok if you do it yourself you can also use Tomcat or open source Glassfish edition.

  All of the above combinations work, you must choose what you are most comfortable with.

  See this page http://www.oracle.com/technology/products/database/application_express/html/apex_listener_install_web.html

  Concerning

• Error 2114 after cleaning registry with RegistryMechanic. The Server service is not started when I try to share a file on my local network and register to an older date seems not possible.

  I am using Windows XP Pro with sp3. Before interfering with the registry, everything was fine. Now, I tried inserting AutoShareWks and AutoShareServer DWORD in the LanmanServer\Parameter, but it does not work. When viewing in "Administrative Tools\.\.\Shares", "error 2114" is displayed. What's happening and where the change happened? How can I get my pictures on my mediaplayer again?

  taaiewillem,
  Thanks for posting on the Microsoft answers Forum.  Unfortunately, a lot of registry cleaners may end up doing more harm than good.  I would check with the registry program, to see if it created any type of original backup before you start.  Now when you say that you "reset the registry to an older date" did you do this through the system restore?  If not then I suggest to run a system restore to a date prior to the registry "cleaning".  If that does not resolve the issue, then you do a repair installation.

  System Restore: http://support.microsoft.com/kb/306084 Mike - engineer Microsoft Support responses
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Yahoo mail does not connect to the server on one of my accounts

  Yahoo mail does not connect to internet

  Hello Curt,.

  Thank you for asking your question here in Apple Support communities. Seems that Yahoo does not connect on your iPhone 6s. I understand not email how important is for everything these days. I will try to suggest a few things you can do to test one we hope to get this up and ongoing run as you expect.

  The first thing we want to make sure is that all your data is safe. You can perform a backup to iCloud or iTunes. Use this article to help with this: backing up your iPhone, iPad, and iPod touch.

  Once your data is safe, try under Troubleshooting in this Apple support article: get help with Mail on iPhone, iPad and iPod touch.

  If you have any question, you may want to try this reset: If your iPhone, iPad or iPod touch connects to a Wi-Fi network. Use the section titled still not 'connect?' and follow the steps to reset the network settings. This brings the network settings to factory default. Then, you can try your email.

  If your Yahoo email account is an IMAP account, you can check the settings here: Apple Mail search parameters, then you can delete the account and set up again. This article should help you with that. Follow the steps described in the article, but remove account, then you can add the account of the rest of the instructions. Set up an e-mail account on your iPad, iPhone or iPod touch.

  Thanks again and have a great day.

• Not able to download Motion Detection on the server of one of my Linksys WVC 2300 camera

  I have two 2300 Wireless that are configured by the same video monitor cameras and I activated triggers motion detection on both devices, but only the camera downloads of video surveillance activities based on motion detection (I can see the video in the surveillance system and I can access the cameras and I can also record video) but I cannot get the camera to download automatically activated detection video movement.

  Are both unable to download cameras activated video motion detection?... Please explain in detail...

• I get an error of the gpu code manager during the launch of After Effects and first

  There are many other topics of the forum on the same issue I'm having, but none of the solutions have helped me solve the problem.

  The error I get is: After Effects error: current Crash. Last logged message was: 5712 > < GPUManager > < 2 > Sniffer result Code: 0

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: AfterFX.exe

  Application version: 13.2.0.49

  Application timestamp: 54816501

  Fault Module name: ImageRenderer.dll

  Fault Module Version: 13.2.0.49

  Fault Module Timestamp: 5481561c

  Exception code: c000001d

  Exception offset: 00000000001f5342

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  Additional information 1: 0f2e

  More information 2: 0f2e4625c9946dee74ad73d4872f948e

  3 more information: a92e

  Additional information 4: a92e6936eb42ee8a57b83beacd7dc5ba

  Steps, I tried to solve the problems include:

  Update drivers

  Make sure that Windows Service Pack 1 is installed

  Wiping my computer with a new installation of Windows 7 and re - install all drivers and windows updates.

  Download and install the latest pack of Nvidia CUDA.

  No positive results so far. It seems also that CC is having a difficult time, install the programs successfully on my computer. The CC library install fails when I install CC Desktop as well, and he gave me an error saying that it was not compatible with other software from adobe installed. But there is no other software Adobe installed at that time.

  Here are my machine features:

  Zbook 15 HP Mobile Workstation

  Intel Core i7-4800MQ CPU @ 2, 7GHz

  NVidia Quadro K2100m

  Intel HD 4600 graphics card

  32 GB OF RAM

  Good, well. I figured this out.

  On a hunch, I downloaded Service Pack 1 of Windows directly from the site and installed from its own Installer. It worked. Apparently Windows Updater has not been installed properly, and that's what was causing the problem.

• HP Chromebook 14 14-q050ca: transferer transfer pictures via card reader, says DCIM needs another application of the store, which one?

  I tried to transfer my photos, I use a card reader and I get a folder DCIM (folder), and then he said: it does not go to the apps store! But that either the app use?

  paul701 wrote:

  Hi banheim,

  I can't download the Explorer, I use a Chromebook 14 14-q050ca with the windows xp operating system, so I ask you again once what app can I download online store!

  Thank you

  PS getting very frustrated!

  Why you go web store, when you use XP? To do this, you contact or visit the camera support site to see what you need to do or install.

• Remove product key of the machine which will not start.

  Hello

  As the title suggests my question is fairly simple. I want to withdraw the license of the laptop that primer is more, but I can't find information on how to do it.

  If the copy of Windows 8 is delivered with your computer (OEM) license is related to this that computer and you cannot install it on any other computer. If you purchased Windows 8 then just use your editing equipment and install it on another computer. When you get an error indicating that your copy is to use already activate by phone.  Here are the instructions; Windows key + R, type slui 4, choose your country, call the phone number, when you get an automated response or say nothing and wait to be connected to a "no live assistance, explain your problem in full and the tech will be able to activate your Windows 8 for you. Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir

• Could not start the server via the SOA node Manager

  Hi all
  
  I try to install AIA 11.1.1.6.0 on top of the SOA Suite 11.1.1.6.0.
  
  I was able to install the weblogic, UCR, soa and osb servers server correctly. Now, before installing the AIA, the document I am following it says, make sure to start the server soa through the Manager of nodes.
  
  Now I start to the administrator of the server, then the node Manager, to make sure I checked the node Manager is in place, I logged the weblogic console, went to the Machines, and I see that it's upward and accessible.
  
  Now using WLST commands, first of all, I have connected to Manager nodes by using the nmConnect() command, so I try to start the server soa through node Manager with the command start ('soa_server1').
  
  I get an error when you try to start the server with the command nmStart() soa, below is the error message...
  
  «Error at startup server soa_server1: weblogic.nodemanager.NMException: Exception when starting Server «soa_server1»»
  
  I ran the command dumpStack(), and I get the output as 'no trace available battery.
  
  If I am able to start the server soa through the node Manager, I can go ahead and install the pack of AIA, but wrong to let me go forward.
  
  I also tried to boot the server from soa through the weblogic console, go to the servers tab, select the soa_server1 and start, the State of the soa server will "FAILED_NOT_RESTARTABLE".
  
  I followed some of those blogs like...
  
  http://Neeraj-SOA-tips.blogspot.com/2010/06/starting-admin-and-managed-servers.html
  
  http://www.javamonamour.org/2011/09/nmconnect-nmstart-nmkill.html
  
  Experts, please give your opinion.
  
  Thank you very much
  N

  Hi Patricia,

  I had exactly the same problem some time ago...

  The cause:
  There are two servers trying to run in debug mode and use the same debug port
  -Xrunjdwp: transport = dt_socket, address = 8453, server = y, suspend = n

  Possible solutions:
  1. turn off debugging (this is what I did)
  2 use the various debugging ports to different servers (difficult to do because the servers share the same scripts)

  What worked for me was:
  1. in % DOMAIN_HOME%\bin, I created a script called startWebLogic_nodebug.cmd with the following content:
  %CD%\bin\startWebLogic.cmd /nodebug % *.
  2. in nodemanager.properties, I changed the following property
  StartScriptName = startWebLogic_nodebug.cmd

  Now my servers start without debugging...

  I hope this helps.

  See you soon,.
  Vlad

• the concurrent Manager on the application server

  We need the simultaneous Manager to the server application.
  
  Please guide me in details.
  
  Kind regards.

  Use quick Clone.

  Cloning of the Oracle Applications Release 11i with rapid Clone [ID 230672.1] - 5. Reduce the number of nodes in a multi-node (fusion APPL_TOP) system
  Sharing the Application Tier file system in Oracle Applications Release 11i [ID 233428.1]

  Thank you
  Hussein

• Activate the Debugging Node Manager using WLST

  Hello
  
  I would like to turn on debugging for Manager node using WLST to instead of using the administration console - by selecting the checkbox for "Debugging enabled" property under environment > Machines > Configuration > Node Manager in the administration console.
  
  I could find the name of the MBean 'NodeManagerMBean' and 'DebugEnabled' property, but I don't know how to add script.
  
  Anyone can guide me please?
  
  Thanks in advance
  
  Published by: vikascv on April 29, 2009 09:23

  Here you go
  Activate the Debugging Node Manager using WLST
  http://www.togotutor.com (Learn the programming and Administration for free at the Togotutor)
  ****************************************************

  def connection_to_Admin():
  Try:
  Connect (username, password, URL)
  except wlst. WLSTException, ex:
  print ' an exception during the connection: %s ' % ex
  Another thing:
  Print "-connected successfully! ---------"

  connection_to_Admin() #Calling the function of connection

  Edit()
  startEdit()

  CD('/machines/MS1/nodemanager/Machine_1')
  cmo.setDebugEnabled (true)

  Activate()

  Thank you
  Togotutor
  http://www.togotutor.com (Learn programming and free Administration)

• R12.2.4 cloning - failed to start the server, run oacore_server1 / oafm_server1

  Hi people,

  I am cloning EBS R12.2.4 for the first time. Database is in read/write mode. After clone then managed fs1. But while I was trying to services to run two services named (oacore_server1 and oafm_server1) not upward before clone, and ended with the error:

  ERROR: Could not start the managed server oacore_server1

  ERROR: Could not start the managed server oafm_server1

  Later, I tried to them manually, but the same results as the previous. I paste the details from the journal of oafm_server1.

  
  

  [Journal of the applmgr@abcddb] $ cat adoafmctl.txt

  07/26/15-00: 51:20: admanagedsrvctl.sh version 120.14.12020000.10

  Validated the arguments passed to the ebs-get-serverstatus option

  oafm_server1 is in STOP mode.

  Validated the arguments passed to the ebs-nmstart-managedsrv option

  The server oafm_server1 is not up. Procedure to start the server.

  Check if the Node Manager is already in place...

  Connection to the node Manager...

  Connected to the node Manager.

  The Node Manager is already in place.

  ERROR: Could not start the managed server oafm_server1

  26/07/01-15: 07:57: admanagedsrvctl.sh: exit status 1

  ================================================================================

  26/07/01-15: 19:04: admanagedsrvctl.sh version 120.14.12020000.10

  Validated the arguments passed to the ebs-get-serverstatus option

  oafm_server1 is in STOP mode.

  26/07/01-15: 20:48: admanagedsrvctl.sh: exit with status 0

  ================================================================================

  26/07/01-15: 21:12: admanagedsrvctl.sh version 120.14.12020000.10

  Call txkChkEBSDependecies.pl to make the dependency checks for oafm_server1

  Perl txkChkEBSDependecies.pl script has run successfully

  Validated the arguments passed to the ebs-get-serverstatus option

  oafm_server1 is in STOP mode.

  Validated the arguments passed to the ebs-nmstart-managedsrv option

  The server oafm_server1 is not up. Procedure to start the server.

  Check if the Node Manager is already in place...

  Connection to the node Manager...

  Connected to the node Manager.

  
  

  The Node Manager is already in place.

  ERROR: Could not start the managed server oafm_server1

  07/26/15-12: 49:18: admanagedsrvctl.sh: exit status 1

  ================================================================================

  Kind regards

  Ali

  Ali and Sandeep, follow these steps:

  starting at $ perl admanagedsrvctl.sh oafm_server1 - Dweblogic.security.allowCryptoJDefaultJCEVerification = true

  ARO