NodeManager with two DOMAIN_HOME for domain_name even

Similar Questions

• Switcher with two facets for the recording of the update and one for folder creation

  Hello world
  
  I have a little problem.
  
  I use a mixer so that the function of the key, I click on the form is either loaded with the row of data update or a new form.
  
  I use two facet on which support the current line using an executewithparams and a different side with just a form of creation.
  
  
  But each form are blank
  
  
  
  It is with my links and executables that they must be in a specific order or what
  
  Help, please
  
  
  Concerning
  Lutchumaya

  Hello

  as signaller is not the right choice. If you use the ADF BC, then the same form is used for both and all you need to do is call createInsert as an operation at the opening of the Form by creating a new line and calling setCurrentRowWithKey when opening it to change

  Frank

• Need for an AP with two antennas for omni antegrated

  Hello

  I need an Access Point with 2 Omni antennas integrated. The 1130G meets my needs?

  Thank you.

  The 1131AG built in omni antennas for 2.4 GHz and 5 GHz range. The 1131G built in omni antennas for 2.4 GHz.

• ASA with two internet connections

  Hello

  I want to connect an ASA with two ISPS for internet traffic, one for the VPN S2S, there is a router VPN dedicatet on the second link.

  In case of failure of the first link, the second must be enabled.

  route outside 0.0.0.0 0.0.0.0 10.20.20.1 1 track 1route backup 0.0.0.0 0.0.0.0 10.20.30.1 254
  
  route backup 192.168.0.0 255.255.0.0 10.20.30.1
  
  Is this configuration working?? 

  Hello

  You need to configure the 'als' monitor configuration to monitor some destination on the main IP address ISP for the ASA whether the connection works. Probably an IP address on the public network.

  SLA 1 monitor

  type echo protocol ipIcmpEcho outside interface

  NUM-packages

  timeout

  frequency

  SLA monitor Appendix 1 point of life to always start-time now

  You will also need a configuration related to 'track' of the order

  track 1 rtr 1 accessibility

  Route outside 0.0.0.0 0.0.0.0 10.20.20.1 track 1

  Backup route 0.0.0.0 0.0.0.0 10.20.30.1 254

  The above combined with the routes you mention should be enough about the delivery. Naturally for each remote VPN L2L network you will always need a specific static route on the SAA to the backup ISP device.

  Also you must naturally maintain the translations on the SAA. Seems that your ISP links have in mind a separate device that contains public IP addresses. So am I right in assuming you pass all traffic from the LAN links for links to PSI via the ASA without any type of NAT, and leave these routers from the private to the public NAT?

  -Jouni

• Can I use separate iCloud for accts Windows on a pc win10 with two accounts?

  CCan I use iCloud separate for Windows accounts on a pc win10 with two accounts?

  You can, but it will be a bit heavy on your part, juggling two accounts, because you will have to a connection, and then connect to another, etc.

• How I find myself with two passwords to iCloud for the same account?

  How I find myself with two passwords to iCloud for the same account?

  For security reasons, I only use iCloud for Contacts and "find my iPhone".

  Several months ago Apple forced me to change my password to iCloud.  So I did this.   In the last months, I used successfully the new password to 10 or 12 times when asked without problem.

  However, I received a notification of a software update for my Apple Watch. I did the update without problem. However, after completing the update my iPhone asked me to connect to my iCloud account. When I did this, she rejected my password. I made 4 attempts typing very slowly and with care for you sure I did it right.

  Then, operating under a hunch, I decided to enter my old password to iCloud. It worked?  I'm confused about this, any ideas would be appreciated.

  I had a similar problem last year. I had to call Apple. Contact is a bottom of this page.

• Summary of functions (two entries) for classes of brother with a dynamic distribution of entry: the static entry retains the type of the parent class.

  Suppose that in a hypothetical example, I have a superclass (number) with two children (real and complex) classes.

  I would define a function of sum for these classes, using dynamic distribution.

  Real or complex would have its own method of the sum (VI) which would be subject to various operations, such as the real and complex numbers are different.

  As I understand it, the normal way to proceed in OOP is for each of these methods to have an entry of dynamic distribution and a static entry of its own type.

  Problem: Labview doesn't let me do this!

  I first define an input method dynamic-shipping dummy for the numberof the parent class, but only the first entry can be dynamic-Envoy while the other is statically typed as number.

  Then, when I create override methods in my two children classes real and complex, the second entry (static) remains under the number (the type of the parent class). This is not fair, because then I can't access the private data of the child class of type real or complex that will be connected to the second input (static).

  What is the solution to this problem (usually)?

  I think that, in LVOOP, you use only a dynamic terminal or a static terminal to the terminal object.

  You can have several other terminals, but all the dynamics VI (methods with the same name) must have the same API (terminals).

  If you have to understand your preferred mode to pass, use multiple terminals, not used by each method, or use a cluster that contains all the numbers to pass (real or complex, both of which are not used in each method) or you can try a Variant, as shown.

• So, my cousins both got two netbooks for Christmas so I took it upon myself to put in place. However, I seem to have problems with getting Homegroup to work.

  original title: incorrect Homegroup password

  So, my cousins both got two netbooks for Christmas so I took it upon myself to put in place. However, I seem to have problems with getting Homegroup to work.

  All computers:
  Have enabled IPv6
  Use Microsoft Security Essentials with the last update
  Are connected to the same router (Linksys WRT54GX2)
  Have no other third-party firewalls or AV installed and have been neatly eliminated via their respective tools when they had their
  Can be seen in the network and can access any other files via 'network '.
  Have the correct date and time and are all in sync with time.nist.gov.
  Have the same network sharing settings (network discovery on, files and printers sharing folders public, sharing, streaming, wide, 128-bit encryption, sharing password protected, to allow windows to manage the homegroup connections)
  Network is set at home, not in public

  The computer that has implemented the homegroup is connected via ethernet to the router while other computers use to access the router 802.11 g I tried to delete and redo the residential group as well.

  Despite all this, it is said that the homegroup password is incorrect for both netbooks (where it says it has encountered an error). I realize that it is case sensitive and I entered the password correctly. I also ran the resolution of the problems of the homegroup on all 3 machines and still no luck. I also tried to change the password and restarting of machines.

  Any suggestions? I was _really_ hoping it will work right out of the box. Maybe it's something with the router? I don't really know. Any help is appreciated. Merry Christmas! : D

  Hello

  check out this link.

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-create-a-HomeGroup

  http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

• Voicemail for one user with two extensions

  Environment:

  Cisco Unified CM Administration system version: 7.1.3.30000 - 1

  Cisco Unity Connection Administration Version 7.1.3.10000 - 68

  We have one user this year who will wear two hats and will have offices in two different places. I have two extensions as a line on each phone. Now, I just need to point the two extensions to the same voicemail box or give the user two mailboxes. It seems that the Administration CM only supports a voicemail by user. I think it would be easier for the user to have only to check a mailbox with two extensions to point to the same VM. How can I accomplish this?

  Hi Andy,.

  Assume that the user has issues 7005 & 8450, but we only want one box mailbox

  @ 7005. There are two ways to do this.

  In CUCM go > feature > Voicemail > voicemail profile and create a new profile called XXXX (whatever name you want) with a Description called "XXXX mailbox username" the Voice Mail Box mask will be 7005 > save

  Then through CUCM go for users of phones > under directory number Config for 8450 > voice mail profile and change to XXXX (previously created in steps above) > update > reset

  Now, when a call from roads via forward to the connection of the unit, it will reach the box mailbox @ 7005.

  Or about the other unit Extension so that 8450 is another Extension to 7005 etc..

  See you soon!

  Rob

  "I don't know how, I don't know when."
  "But you and I will meet again."

  -Tom Petty

• I dealt with this problem for months. Even hired a comp tech to fix it and still have the same question. There, nobody helping me?

  I dealt with this problem for months.  Even hired a comp tech to fix it and still have the same question.  I had my computer wiped and windows 7 and 8 then reinstalled by a professional.  This all started when I upgraded form 7 to 8.  After 7 to 8 my computer kept getting this error. . kept crashing.  He was supposed to be fixed and it still does the same thing. I was told then move to 8.1.  I have always the same coming error.  I'm not on computer.  IS THERE ANYONE WHO KNOWS HOW TO FIX THIS?  Someone who can explain to me step by step how to fix?  I've tried everything.  Error 0x0000005c [settings 000000000000800 0x000000000000000B x 0 0 x 0000000000000000 0 x 0000000000000000]

  Hello

  The upgrade to 8.1 was perhaps not the best thing to do...

  A lot of people are having problems with it also.

  If it is a desktop computer, have you checked the wall outlet and the plug on the back of the computer?

  Your point about starting the tone certainly as a power or a hard disk problem...

  The problem with you mouse pointer could be related to a feature called quick start...

  Your other problem also, perhaps... Try to turn it off and see if it helps...

  This feature works only when you make a STOP and then start.

  It is not perform a RESTART.

  Turn on or off...

  Go to the control panel... Power options, and then select choose the power what buttons on the left.

  Then select change settings that are currently unavailable near the top center of the screen...

  Lower on the window, uncheck the quick start.

• I bought the Creative Suite 5 cloud in June 2010 (Ser # DELETED) if I recall with two licenses, one for my laptop iMac book Prod and one for my iMac 27 "flat screen.  My Mac Book Pro needs to be replaced by a newer Mac Book Pro wi

  I bought Cloud Creative Suite 5 in June 2010, if I recall with two licenses, one for my laptop iMac book Prod and for my iMac 27 "flat screen.  My Mac Book Pro should be replaced with a new Mac Book Pro with recent operating system software upgraded OS.  What can you do for allowing me to transfer my course in Creative Suite 5 for my new Mac Book Pro?

  [NEVER SEND A SERIAL NUMBER IN AN OPEN FORUM.]

  [personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]

  [This is an open forum, not the Adobe support, please do not post personal information]

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• Best practices for network configuration of vSphere with two subnets?

  Well, then I'll set up 3 ESXi hosts connected to storage shared with two different subnets. I configured the iSCSI initiator and the iSCSI with his own default gateway - 192.168.1.1 - targets through a Cisco router and did the same with the hosts configured with its own default gateway - 192.168.2.2. I don't know if I should have a router in the middle to route traffic between two subnets since I use iSCSI ports linking and grouping of NETWORK cards. If I shouldn't use a physical router, how do I route the traffic between different subnets and use iSCSI ports binding at the same time. What are the best practices for the implementation of a network with two subnets vSphere (ESX host network: iSCSI network)? Thank you in advance.

  Install the most common iSCSI would be traffic between hosts and

  the storage is not being routed, because a router it could reduce performance.

  If you have VLAN 10(192.168.1.0/24) iSCSI, VLAN 20 (192.168.2.0/24) ESX

  MGMT and VLAN 30 (192.168.3.0/24) comments VMs and VLAN 40 (192.168.4.0/24)

  vMotion a deployment scenario might be something like:

  NIC1 - vSwitch 0 - active VMK (192.168.1.10) MGMT, vMotion VMK (192.168.4.10)

  standby

  NIC2 - vSwitch 1 - current (VLAN30) guest virtual machine port group

  NIC3 - vSwitch 2 - active VMK1 (192.168.1.10) iSCSI

  NIC4 - vSwitch 2 - active VMK2 (192.168.1.11) iSCSI

  NIC5 - vSwitch 1 - current (VLAN30) guest virtual machine port group

  NIC6 - vSwitch 0 - MGMT VMK (192.168.2.10) standby, vMotion

  VMK (192.168.4.10) active

  You would place you on VLAN 10 storage with an IP address of something like target

  192.168.1.8 and iSCSI traffic would remain on this VLAN. The default value

  gateway configured in ESXi would be the router the VLAN 20 with an ip address of

  something like 192.168.2.1. I hope that scenario help set some options.

  Tuesday, June 24, 2014 19:16, vctl [email protected]>

• Encrypt/decrypt a file even with two different passwords

  Hello world:
  
  I am quite new to Java and cryptography in general and have a theoretical question. The following scenario is possible and how it would be:
  Two users with two passwords (say a regular user and a superuser) encrypt, decrypt, read and write to the same file. Secret key for encryption and decryption must be based on their passwords (generated from their passwords), and not not stored anywhere on the system.
  
  I've been racking me my brains, but can't think of a way. Am I missing an obvious solution?
  
  Can it be done?
  
  Thank you
  Michael

  I don't think that you can avoid having more than a hash of password stored on the system. Using a combination of my approach and Jeff I can implement this as long as you leave a password protected key store must be stored on each system. Key store a given user would contain its RSA private key and the public key associated with certificate RSA for the admin user (thought the admin user's public key could be stored in the program since it does not have to be kept secret). The admin user key store will contain only its RSA private and public keys.

  Suppose that the data file must be create a nonadministrator user standard. The code performs the following actions-

  (1) to generate a key random symmetric algorithm. Tell a 128-bit AES key.
  (2) write a condensed version of the present in the output file.
  (3) he wrote the random key encrypted with her public key to the file.
  (4) he wrote his public key (or certificate) in the file.
  (5) that he wrote the random key that is encrypted with the public key of user admin to the file.
  (6) he encrypts data using keys written random the result in the file.

  This user can then update the file of

  (1) read the file the fingerprint of the random key.
  (2) reading of the random key encrypted with her public key.
  (3) decrypt this random key encrypted using its key private, extracted from its keystore.
  (4) check the fingerprint of this key to make sure it has the correct random key.
  (5) jump his certificate and random key encrypted with the public key for the admin user.
  (5) related to the decryption of data using the random key.
  (6) update of the data.
  (7) re - encrypt file, as described in the first part with a random key.

  The admin user can

  (1) read in the footprint of the random key file.
  (2) skip the random key that is encrypted with the public key of the user.
  (3) reading of the public key of the user of the file (for later use, if the file needs to be updated).
  (4) read the random key encrypted with the public key of the admin.
  (5) to decrypt the key random using the private key of the admin, obtained from its key store.
  (6) verify the fingerprint of the random key to ensure that it is correct.
  (7) to decrypt the data.

  The administrator can modify the data since it can re - encrypt data in a similar way to the way it was created in the first place.

• RTF model for XML with two lines

  Hello
  
  I have an XML where the data comes from two sets of lines. The XML example is given below:
  <? XML version = "1.0" encoding = "UTF-8"? >
  -< ListBillingAccounts >
  -< CutInvoiceSubAccounts >
  < BillingNumber > 23232 < / BillingNumber >
  Dinesh < name > < / name >
  -< ListPaymentProfile >
  -< PaymentProfile >
  < AccountNumber2 > 4444555566667777 < / AccountNumber2 >
  < / PaymentProfile >
  -< PaymentProfile >
  < AccountNumber2 > 4444555566668888 < / AccountNumber2 >
  < / PaymentProfile >
  < / ListPaymentProfile >
  < / CutInvoiceSubAccounts >
  -< CutInvoiceSubAccounts >
  < BillingNumber > 12345 < / BillingNumber >
  Jayesh < name > < / name >
  -< ListPaymentProfile >
  -< PaymentProfile >
  < AccountNumber2 > 44445555222255555 < / AccountNumber2 >
  < / PaymentProfile >
  -< PaymentProfile >
  < AccountNumber2 > 44445555666699999 < / AccountNumber2 >
  < / PaymentProfile >
  < / ListPaymentProfile >
  < / CutInvoiceSubAccounts >
  < / ListBillingAccounts >
  
  I want to show data from two sets of lines into a single line in a table. for example: Dinesh has two AccountNumber2, 4444555566667777 and 4444555566668888.I want to show in the table with two lines. Something like this:
  Dinesh 44445555666677777
  Dinesh 4444555566668888
  Jayesh 44445555222255555
  Jayesh 44445555666699999
  
  How can I achieve this with an RTF?
  
  Please notify.
  
  Thank you!!

  Put a loop on the paymentprofile

  
    - 
  
  

• can a cell phone work with my counter top prepaid... I want to buy a laptop & want just a re-payment for her more my computer desk top can my ISP allow me to use pre paid usb with two computers...

  can pre-paid work with the office for example 2 computers and portable usb...

  THX in advance

  The dongle is normall work on ANY Windows XP (SP2) or higher OS - whether on a desktop, laptop, netbook or Tablet - simply plug it into an available USB port and follow the instructions that come with it.

  Your ISP does not need to know anything - but it is much cheaper to use focused on fixed-line broadband that the dongle-based, generally speaking, so I would stick with the landline for your desktop, unless you have a fault on the line.

  All the dongles are based on usage - here in England you can get 1 GB prepaid for £10, 3 GB for £15 and 7 GB for 25 books on my ISP (and refills are valid for 28 days so you lose any unused allowance). What is the where you are I have no idea. Be aware that many providers expire your SIM card, if it is not replenished for a period of time (3 months, I think, for mine)

  Contract dongles can be cheaper - and have quotas of similar (or better) use.