Noise reduction and sharpening in lightroom 5.2 problem develop between the two and library module.

Similar Questions

• Cc of Lightroom export no noise reduction and sharpening changes

  I have recently updated to Lightroom from 5.7 to CC, but can not get the noise reduction and sharpening of changes to export. The files are imported from a D7200 of Nikon NEF files. After you change the image, I can see the changes in library modules and put at the point, but not in the exported jpg file. Any help is greatly appreciated.

  Thanks for posting the requested screen captures and ISO setting. You see more noise in the exported JPEG image file in the library and develop modules because you have output applied sharpening (sharpen: high screen). This is the case additional sharpening not present in the library modules and develop. ERGO: They will be different. Output sharpening should be used when reducing the size of the image with "Resize to Fit" checked. Each time an image is resized it loses the edge sharpness and output sharpening restores the details of contours in the small size file.

  Follow the instructions in deepakgahlot provided in response #1 and ensure that the export module output sharpening > sharpening for: is not checked. If you still have questions please download one of the files on Dropbox image or other file sharing site and post the sharing link.

• The difference between the two copies and Clone?

  I make a copy of an existing symbol. On the Edit menu, they have Dulicate and Clone to achieve this. What is the difference between the two? As far as I can tell, if I select the clone, it puts a copy of the object directly on top of the selected object to copy. If I select duplicate it offered the copy is not directly above the original to copy object. What is the difference?

  Well Yes

  Jim Babbage

• I have a design program on my iMac and Air. I want to transfer a file between the two, but it's in a format that it cannot open any applications. Can I transfer it somehow between the two?

  I have a version software Punch Home Design compete 17.5 on both my iMac and my Air.It saves files in my office as a .dxf file. I want to transfer the file to my Air, but nothing opens a .dxf file, including the Dropbox App Home Design is without help. Is it possible to just connect the two computers and share the file? It offers 3D features that I want to show a customer without making them come to my office and look at my big mac. The two computers are on 10.11.3, so what counts.

  I don't understand how a program that works and which saves .dxf files can open them but CADintosh can open the .dxf files.

• How do I mix the light gray and dark gray so that the line between the two disappears?

  I have a picture with a line of demarcation light gray and dark gray.

  Is it possible to use a mask with a gradient to mix the two? Not a gradient on the whole picture, but only on the bottom?

  I think that's what I'm asking: how to apply a gradient to a layer mask so that it influences only the mask and not the entire photo?

  If there is a better way for me to ask the question, I would like to know the terminology.

  Thanks for your help.

  To change your picture as below;

  a: I created a new layer and use the tool degraded with forefront and background colors picked on your wall floor and to. This has created a gradient using your background color. Note the gradient does not top down but a little more the third middle.

  b. I created a layer on this new layer mask to reveal everything, but then set a black white gradient at the bottom, just so that the shadow detail would come by

  c. I made a selection of the box then on the gradient layer mask - filled that black - so that the box appeared.

  

  The layers panel is shown below

  

  Dave

• find and change between the two

  I want to change in my text frames written in the style of paragraph text "EBT".

  Between 1 to 3 of the text 'ABC '.

  Between the 4 and 7 'BIM' text

  Between 7 and 10 'KLM '.

  must write

  where and how a mistake

  var myDoc = app.activeDocument;
  var myFrame = myDoc.allPageItems;
  for(var i=0;i<myFrame.length;i++){
  //if(myFrame[i].appliedObjectStyle == tmc) {
  //if(i==5){break;}
  app.findGrepPreferences = app.changeGrepPreferences = null; 
  app.findGrepPreferences.appliedParagraphStyle = "myParS";
  app.findGrepPreferences.findWhat = "EBT";
  if ((i > 0) && (i <= 3)) {var changeX = app.changeGrepPreferences.changeTo  = "ABC";}
  if ((i > 3) && (i <= 7)) {var changeX = app.changeGrepPreferences.changeTo  = "BIM";}
  if ((i > 7) && (i <= 10)) {var changeX = app.changeGrepPreferences.changeTo  = "KLM";}
  myFrame[i].texts[0].changeGrep(); 
  app.findGrepPreferences = app.changeGrepPreferences = null; 
  
  

  Dirty solution... ;-)

  var myDoc = app.activeDocument;
  var myFrame = myDoc.allPageItems;
  
  for(var i=0;i 0) && (j <= 3)) {app.changeGrepPreferences.changeTo  = "ABC"; myFrame[i].changeGrep(); }
      if ((j > 3) && (j <= 7)) {app.changeGrepPreferences.changeTo  = "BIM"; myFrame[i].changeGrep(); }
      if ((j > 7) && (j <= 10)) {app.changeGrepPreferences.changeTo  = "KLM"; myFrame[i].changeGrep(); }
      app.findGrepPreferences = app.changeGrepPreferences = null;
  }
  

• panels with tabs (vertical) - addition of new tabs at the top and between the two existing

  I use a panel vertical tabs which often have to be added to.  It seems that you can add a new tab at the bottom? Is it possible to add new top? and between two existing tabs?

  Yes.

  You can add just down as usual and then select the new tab and drag it to the location between the tabs you want to place it between.

• Strange problem casting between the DATE and time STAMP

  Hello world
  
  I'm faced with a problem of strange casting between the DATE and time STAMP. Strange, because this happens in SQL-Developer and the Testdatabase, but not when called from inside SQL-Plus, even if all Session settings are set to the top completely equal.
  
  I work on the Oracle 11 g Enterprise Edition Release 11.2.0.1.0 Windows database and run the following script, taken from SQL-Developer script output:
  
  < pre >
  create table ts_test)
  time/date stamp,
  stamp_copy timestamp)
  table TS_TEST standing.
  
  create or replace view vw_test as
  Select cast (date stamp) buffer,
  Cast (stamp_copy as date) stamp_copy
  of ts_test
  view VW_TEST standing.
  
  insert into ts_test
  Select systimestamp, the double null
  1 eingefugt Zeilen.
  
  Commit
  festgeschrieben.
  
  create or replace trigger trg_ts_test_iu
  instead of update on vw_test
  Start
  Update ts_test
  Set stamp_copy =: new.stamp_copy;
  end;
  RELAXATION trg_ts_test_iu kompiliert
  
  Update vw_test
  Set stamp_copy = stamp
  1 Zeilen written on.
  
  Select the stamp, stamp_copy, dump (stamp_copy)
  of ts_test
  STAMP STAMP_COPY DUMP (STAMP_COPY)
  -----------------------------------------------------------------------------------------------------------------
  30.05.2012 19:08:49, 218000000 30.05.3192 20:09:50, 000000000 Typ = 180 Len = 7: 131,192,5,30,21,10,51
  
  Select *.
  of nls_session_parameters
  VALUE OF THE PARAMETER
  ----------------------------------------------------------------------
  NLS_LANGUAGE GERMAN
  NLS_TERRITORY GERMANY
  NLS_CURRENCY €
  NLS_ISO_CURRENCY GERMANY
  NLS_NUMERIC_CHARACTERS.
  NLS_CALENDAR GREGORIAN
  NLS_DATE_FORMAT exact hh24:mi:ss
  NLS_DATE_LANGUAGE GERMAN
  NLS_SORT GERMAN
  NLS_TIME_FORMAT HH24:MI:SSXFF
  NLS_TIMESTAMP_FORMAT JJ. MM YYYY HH24:MI:SSXFF
  NLS_TIME_TZ_FORMAT HH24:MI:SSXFF TZR
  NLS_TIMESTAMP_TZ_FORMAT JJ. MM YYYY HH24:MI:SSXFF TZR
  NLS_DUAL_CURRENCY €
  BINARY NLS_COMP
  NLS_LENGTH_SEMANTICS TANK
  NLS_NCHAR_CONV_EXCP FAKE
  
  17 Zeilen offiziell
  
  Rollback
  Rollback abgeschlossen.
  < / pre >
  
  Look at the strange data that stamp_copy was after the update.
  
  When run from SQL over, everything is fine. But when I run this code in our application, the same phenomenon occurs. I've even seen a data dating back to the year 11907 (!), giving an exception by selecting from the table.
  
  Someone at - it an idea on how to work around this bug?
  
  Best regards
  
  Jürgen

  Did you check metalink for bugs?

  There are a few listed in this blog, that may be useful for you.

  http://hoopercharles.WordPress.com/2011/02/17/strange-timestamp-behavior/

• Calculation and display of difference between the two amounts

  Hi all
  
  I have the report in which I am posting two SUM fields at levels of summaries.
  
  <? xdoxslt:sum (LINE_QTY)? >
  and
  <? xdoxslt:sum (INV_DIST_AMT)? >
  
  I want to display another field bordering these fields that will be the difference between these two.
  
  Can you please tell me the function to achieve.
  
  Thank you
  Anish.

  Have you tried this:

  If you want to continue using the scope function, then use

• Incompatibility between the two recorded and stored data

  Hi guys, I am preparing Labview codes for reocording synchronized analogy and reading. Specifically, I want to record for 6 seconds, while the sounds of output for 5 seconds. This means that the analogue output stop 1 second before the end of the recording. In addition, I want to save the second 6 check-in 3 files TDMS (2 seconds). However, I couldn't do my codes work in the required way (attached). I have identified two problems that are beyond my skills.

  1. "some or all of the requested samples are not yet acquired. It's weird, because I already have the function of "DAQmx Read" provided that only when there is sample to read.

  2. instead of save data to 3 TDMS files, only one file is generated.

  I am grateful for your help. Thank you very much.

  luojh135 wrote:

  Hi guys, I am preparing Labview codes for reocording synchronized analogy and reading. Specifically, I want to record for 6 seconds, while the sounds of output for 5 seconds. This means that the analogue output stop 1 second before the end of the recording. In addition, I want to save the second 6 check-in 3 files TDMS (2 seconds). However, I couldn't do my codes work in the required way (attached). I have identified two problems that are beyond my skills.

  1. "some or all of the requested samples are not yet acquired. It's weird, because I already have the function of "DAQmx Read" provided that only when there is sample to read.

  2. instead of save data to 3 TDMS files, only one file is generated.

  I am grateful for your help. Thank you very much.

  You have a beautiful mess!  (Sorry, but you do) Your little logic code.

  First of all, if you want to save data to a file aDAQmx TDMS task do it! Enable logging of data it will greatly simplify your diagram to the point where some of the other problems become more obvious.

  Now, let us look at this section:

  

  In the present, I can that you used to be a programmer of text.  These subsets 'replace Array' actually boggle my mind! Why replace the first element of the tables full of zeros? and why is it a picture of 5,000 items?   Looks like you put 5000 zeros on the front and back of the noise AND stuffing a 0.99 in the first element of an array of 5000 zeros only to replace the range of a 0.99 and 4999 zeros with a table of 5000 zeros TWICE! (in case the first subset of the table replace did not work? WWYT?) But save a little... A high pass filter with fh = 11000 and fl = 8000?

  Save the help file, we find:

  

  Then, this constant 110000 doing here? (Other than ignored)

  Save a little and you father a production 1.25 M points of noise Gaussian with a gap of 0.1, but the constant is labled rms.  (Go fix it now before you confuse us no more!)

  In all sincerity. I've seen worse but please correct obviously I did notice and we could be much more effective to help with the subtle substance which can always be wrong.

• Where is the help of Adobe Lightroom 6.0 problems (aging of the images transferred to photoshop cs5)?

  My Photoshop cs5.0 freezes when I transfer a picture to copy with the rendering of lightroom to Photoshop cs5.0. General advice is to download a new copy of 'Manager', but it does not download (I think that Adobe has dropped all support) if anyone can help?

  Make sure that your PS CS5 is updated and or to do a reinstall of the PS CS 5 over the current installation.

• much faster image navigation (develop and library modul)

  take a folder with raw images, open breezebrowser... Select ctrl-s (slideshow), ctrl-s (stop slide show) and then fly through the images to select or remove... .de, then you know what to do - saves tons of time even a small project... compared to lightroom

  Thank you

  Did you post before moving to ask a question or you feel just like evacuation?

• What is the best way to switch between the two sets of bookmarks, say 'work' and 'private '?

  I want to use for sets of bookmarks, so that when I'm not working, I'm not distracted by my favorites not work and vice versa. For the last two months, I use two user accounts to achieve, but it's kinda a PITA. Links from other applications like Thunderbird mail are opened in the default profile. In other words, when I'm not at work and I click on a link in an e-mail, a new window opens with the work of my Firefox profile.

  All I need is a thing or an extension to switch quickly sets bookmark. Or a way to switch profiles without having to open a new Firefox window. Any ideas?

  You can not get Firefox works as you explain that you want. The default profile cannot be changed on the fly for the profile you are currently using. This message "Firefox is already running... "returns to cause you or 'something' trying to open a profile 2 (or later), unless -no-remote command has been used to open the additional profile. And -no-remote will not work to open the default profile without causing problems with the way Windows works with "call" the default browser.

  In response to your last statement - "to separate my work and private stuff I just need to change the content of my bookmarks bar, so I was hoping there was a trick to keep groups of favourites."

  This extension will allow you to change the Bookmarks Toolbar folder while you use Firefox.
  https://addons.Mozilla.org/en-us/Firefox/addon/set-as-bookmarks-toolbar-folde/
  I just installed this extension and check that it still works in 35 of Firefox.
  There is a context menu item for 'Set as Bookmarks Toolbar Folder' ' which appears when the Menu Bookmarks menu Bar drop-down is used (not in the library window or the bookmarks bar). This menu item is displayed when you right-click a folder in the folder Menu bookmarks. It does not appear with the folder "Personal bar" or the "Unsorted Bookmarks" - only a folder in the Menu "Favorites".
  Should be 'resolved' eager to have two different settings for the bookmarks toolbar, but the profile default 'thing' is always a problem for what you are trying to accomplish. I don't 'see a fix' for that - without resorting to a 2nd user account window, which is what I thought you were referring to by "I use two user accounts to achieve" in your initial post.
  And because the menu bar is hidden by default, these days, you can use Alt and B to open the bookmarks menu dropdown Bar Menu 'revealed' so you can access this menu "Set as bookmarks toolbar folder" item - without having to show the Menu Bar all the time.

  BTW, using 'accounts' instead of 'Profiles' can be confusing during the review of Firefox profiles.

• I changed my point of view screen to "maximize" and then changed back to normal and "applied" this change. The view on my screen moves back between the two.

  I went on 'Properties' and then changed the screen to "maximize" that was impossible to navigate.
  I then reset the command on the screen 'Normal' then 'Apply' and 'OK '. Now when I open Firefox it
  by default, the maximum size of the screen. No matter how many times I try to re - configure
  the size of display screen, the default browser to the Maximum size. Nothing works!

  You can check if you have a user.js file in the Firefox profile folder that affects the pref browser.sessionstore.resume_session_once true value.

  • http://KB.mozillazine.org/browser.sessionstore.resume_session_once

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

  See also:

  • http://KB.mozillazine.org/Preferences_not_saved

• can I have both versions installed and switch between the two

  Can I have two different versions of firefox are installed and switch between them? If so, how do I set up.

  Yes, I have several versions of firefox are installed. Firefox 3.6 is always taken in charge and course, there is the beta, the Aurora and the roads every night. I'm guessing that the other default channels install in clean places out there rather than overwrite your current installation, if not choose the custom installation option.

  This is something advanced, generally used by developers etc.

  CARE do not uninstall and take an option to remove personal settings, but that is written, as that attempts to remove all the profile data for all versions Firefox installed, you will lose the passwords and bookmarks etc..

  Use unique profiles - where Firefox stores your bookmarks, passwords and other user data for each version, or you will have problems.

  • See http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
  • http://KB.mozillazine.org/Testing_pre-release_versions#Installing_multiple_versions