BEFSR41 issue Internet connection

Similar Questions

• BEFSR41 slow internet connection

  I apologize in advance because I'm sure this question has been asked before, but I couldn't find an answer in the archives to solve my problem.

  I just upgraded to internet service Charter 20 Mbs I was already on the 5Mbs Charter.

  Before I upgraded my internet speed via speedtest.net are:

  Download ~ 5 Mb/s

  Download ~0.5 Mb/s

  After I improved my speed with the router connected to the modem are:

  Download ~ 8 Mb/S

  Download ~ 2 Mb/S

  If I bypass the router and connect my computer directly to the modem speed is:

  Download ~ 20. 5 Mb/s

  Download ~ 2 Mb/s

  The router and the Modem I use are:

  Router - v2 BEFSR41 - I installed the firmware to v 1.46.02 tonight - has not helped speed

  Modem Ambit 60678EU

  Do I need a new router?

  Thanks in advance

  The BEFSR41 v2 router WAN Port is Port RJ - 45 10Base, he can't handle a 20Mbps connection... You will need to buy a new router...

• Loss of Internet connection and Windows 7

  In our headquarters, we have a desktop system running Windows 7, but also an iMac.  The two are connected to Apple's Time Capsule, which serves as a router and a backup for the iMac hard drive. (our Internet connection is cable Internet, by the way.)

  Since upgrading from Windows Vista to Windows 7, the Windows 7 Desktop faces of frequent Internet connection errors.  Generally, it loses the connection to the Internet several times per day.

  Today, it's the worst event we've seen so far (since the upgrade to Windows 7 last week).  We usually only an Internet connection for about 2-3 minutes, then it is lost and needs to be repaired.

  We enter the control panel > network and sharing Center > issues > Internet connections

  Let us Windows 7 automatically diagnose and repair the problem.

  Whenever he goes through the stages of diagnosis and repair, it ends by "reset the connection area card."

  At the end of the process - after everything has been repaired - we get the following report:

  "Default gateway is not available - fixed.

  Should what measures we take to permanently solve this problem?

  Moreover, the iMac does NOT have Internet connection issues whatsoever.

  Thanks in advance!

  I don't know what you use to assign addresses, so I guess it's a router of some sort. You will need to go to the website of manufacturers, look at the manual and know how to limit the DHCP address field. I changed mine to limit the address 192.168.1.200 thanks 192.168.1.250 DHCP assignment. Your router can use the 10. subnet, so your address may be different, depends on the manufacturer of the router, or if you use a DHCP, the scope with the DHCP server. Gives me 50 IP addresses for all the guests who may want to use wired or wireless connections and should be more than enough. This allows me to attributed to the 192.168.1.1 through 192.168.1.199 a device and not having to worry about the DHCP server, you try to use one that is applied continuously to a device (printer, switch, PC, server, virtual server, etc.).

  Once this configuration of your router, you will now need to assign a static ip address to your PC. All this is done for the network card.

  On the start menu:
  Control Panel
  Network and Internet
  Network and sharing Center
  In the right pane of network and sharing Center
  Change the settings of the card
  Double-click your network adapter
  Check the box «Détails»
  Note the following lines:
  Connection specific DNS (may or may not exist, depends on the provider)
  IPv4 subnet
  IPv4 default gateway
  IPv4 DNS servers

  Once you have written those down, you can close this box.
  You should be back at the "Local Area Connection Status" box.
  Select the option "Properties".
  Select 'Internet Protocol version 4 (TCP/IPv4)', which will be in a blue when selected.
  Now, select the option "Properties".
  "IP version 4 (TCP/IPv4) properties" box should have popped up. If so:
  Select the following text:
  "Use following IP address".
  In the IP address box, enter an IP address. Example: 192.168.1.20
  Press the tab, the subnet must fill automatically, otherwise, enter the "Subnet IPv4" value you noted in the above step. Examp, e: 255.255.255.0
  The bridge of dafult, enter the value of the above procedure. Example: 192.168.1.254

  Now switch to the next 2 boxes, DNS servers. You can have only 1 entry in DNS server of the DNS entry you noted from above.
  Enter the DNS servers that you noted above.

  If there is "Connection specific DNS" writing or entries, follow these steps (otherwise, skip the sections "Connection DNS"):
  Select the option "Advanced".
  The "Additional TCP/IP parameters" window should open
  Select the "DNS" tab

  If it has more than 1 input "Connection specific DNS", follow these steps:
  Select it "add DNS suffixes (in order):
  Select "Add..." »
  In the "suffix domain', enter the first connection specific DNS entry.
  Select the option 'Add '.
  Add all the specific DNS suffixes that you noted. You can enter one at a time.
  When the radio button finished choose "OK".

  If you have only 1 entry in "Connection specific DNS":
  Entitled "DNS suffix for this connection", enter the entry you noted above for the "specific" connection DNS
  When the radio button finished choose "OK".

  Check the "validate their output parameters.

  Select the radio button 'OK '.

  Select the radio button "close".

  You should see the "Windows Network Diagnostics' open and check for any problems. I hope that everything is fine and he says 'Troubleshooting couldn't identify the problem' and choose 'Close the Troubleshooter'.
  Close additional boxes or pop-ups that are open and check and make the connection sure allis. If not, go back and check all the steps. the most common are the IP addresses and gateways.

  Good luck. After back if it solves the problem.

• HP Pavilion 15 t issues with Internet connectivity can be used under Windows 8

  So I just got my new HP Pavilion 15 t-e000 CTO Notebook PC last week, it runs Windows 8 & amp; It is a 64-bit.
  
  The only problem I've had is to stay connected to my wireless Internet. The connection stops at random intervals saying 'Limited' instead of 'connected '. I have to constantly disconnect and connect to my WiFi. It's particularly frustrating when I am trying to download something that lasts longer than a few minutes because the Internet connection cuts, and I have to start the process.
  
  I tried pretty much every "difficulty" people have posted that worked for some people. No luck for me. Sometimes it seems that he will stay connected and then I try to connect to a web page or download something and it turns off again.
  
  -Turn off the "Allow computer to turn off this device to save power" under power management in the properties of my wireless connection section... DID NOT WORK
  
  -By using the command prompt to reset the network card... DID NOT WORK
  
  -Running the network and Internet, and convenience stores something... Didn't WORK * update: if I run the connection test network via the HP help/support on my desk Center, while the connection says Limited, I get the notice that the 'default gateway was not available"and the router has been handed over to zero and issue fixed, etc. BUT if I run the test, while the connected said wireless, the test still says there is no problem. And although the test 'fixed' the issue, it does not because the Internet always cut again.
  
  -Updates Windows has installed new updates several times... DID NOT WORK
  
  -Forget the wireless network and set up as a new... DID NOT WORK
  
  -With the help of my computer right next to my wireless router... DID NOT WORK
  
  Used wireless router is: Cisco Linksys Wireless-G 2.4 GHz router to wide band as well as our network is WPA with a security code. We also have an Internet DSL SpeedStream thing (sorry, I don't know what it's called). The Compatibility Center said that this router is compatible with Windows 8. Other computers running Windows 7 and Windows Vista, iPhones, iPads and all work fine.
  
  My laptop uses Intel Centrino Wireless - N 2230 and the light is on and it still says ' device working properly "in the properties.
  
  For any help or suggestion would be greatly appreciated because I am at my wits end.
  
  Thank you

  Therefore, it seems that my problem with the limited Internet connection has been resolved. I didn't use my computer for two days and this afternoon, when I turned it on I was still having problems. However, I went to the HP Support Assistant, and it appeared that I had a few updates to download and install, so I let him do his thing. It took awhile because the Internet kept cutting out, but once the update for the wireless Intel have finally set, my connection is REMAINING CONNECTED. Finally!

  I don't know why when I went into the properties wireless it says "device working properly ' and when I tried to update the driver it says"your driver is the latest version"or something else.

  I suggest you just go to the HP Support Assistant and updates in the section "Updates and the updates of". It was a bit random, but touch wood my looks of problem connecting wireless to be gone.

  Hope this helps

  P. S.

  Here is a screenshot of what the HP Support Assistant (this is the logo of big question mark) main screen looks like:

  

• With Microsoft Vista and McAfee Internet connection issues

  Hi I would appreciate any help with this issue.  I'm not a very experienced user.  I'm having all kinds of problems with McAfee Security 9.0.  He stops working and says I have no internet connection and that you can not update. I contacted McAfee and they came on my computer, uninstalled and reinstalled and I'm still having the same problem.  Them, that I came across an article from McAfee dealing with this problem and Windows Vista.  I have the 64 bit version.  The solution is 1. Click on the Windows button and type cmd.

  2. right click on cmd and run as administrator

  3. at the prompt, type the following command, and then press ENTER:

  netsh int tcp set global autotunninglevel = off

  It then gives you instructions to reactivate the auto-tuning network if this does not resolve the problem.

  I would like to know if anyone has tried this and the results, also if this works this deactivation causes me to have other problems with my computer.

  This may seem very simple for some people, but because I'm not known I want to create more problems than I have now.  Through this site, I learned how to remove McAfee from my computer, and it would be the last thing I would do if nothing works.

  Thank you... Victoria

  Hello

  It's as good as anything else, it's free and designed to work properly with Windows OS'.

  http://www.Microsoft.com/security/PC-security/MSE.aspx

• Internet - connection drops with my Toshibha laptop/internet connectivity issues arrives and stops randomly

  Original title: Internet connectivity

  my computer toshiba laptop windows 7 just started to fall sharply internet all in a show that is to connect to the internet all my other devices all always online - internet comes back randomly and goes off randomly - tried all settings to make sure that everything looks good.

  Hello

  Welcome to the Microsoft community.

  I understand that you have a problem with internet connectivity. We apologize for the inconvenience caused to you. We also indicate the steps you did.

  I would like to know the details below to help you better.

  1. What is the model number of the laptop you are using?
  2. Do you have a code error message when connecting to internet?
  3. You did changes to the computer before the show?
  4. You are connected to an internet connection wired or wireless?

  I ask you to run the Network Troubleshooter utility first to see if it can help diagnose and solve your problem. Open the utility of network troubleshooter by right-clicking the network icon in the notification area, and then click troubleshoot.

  You can also run the troubleshooter of Internet connections by:

  1. By clicking on the Start button, and then clicking Control Panel.
  2. In the search box, type Troubleshooting, and then click Troubleshooting.
  3. Under network and Internet, click connect to the Internet.

  If the problem persists, try to perform the steps of troubleshooting mentioned below in Microsoft Help article and check if that helps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

  Keep us updated on the issue to help you better.

• My Windows 7 Pro system has some serious hardware, internet connection and security issues. The system image and restore the system in case of failure.

  My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  My efforts to remedy by restoring a system image backup failed.  At this point, I'm ready for a new clean install if I have to buy a drive to do.  My question is whether a professional Ultimate upgrade will or will not fix these bugs.  In addition, what is the cause of restoring the system to fail?  I never turned off or cannot create regular restore points.

  Original title: upgrade a "Fix" for existing system problems?

  My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  My efforts to remedy by restoring a system image backup failed.  At this point, I'm ready for a new clean install if I have to buy a drive to do.  My question is if an upgrade to Professional Ultimate will be or not correct not these bugs.  Also, what is the cause System Restore to fail?  I never turned off or cannot create regular restore points.

  Hello

  1 re-installing/repairing software will not fix hardware issues.

  2. the operating system upgrade is not the way to solve computer problems that can be carried forward.

  3 1. If you use Norton, you should disable Norton inviolable Protection before using System Restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  AVG will cause problems with SR too.

  «Temporarily disable AVG»

  http://www.Avg.com/ww-en/FAQ.Num-3857

  2. try to use Safe Mode system restore.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  "Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________

  We really need for more details:

  "My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  See you soon.

• Satellite C660-258 - Internet connection issues

  Recently, my laptop started to suffer serious problems when you try to connect to the internet.
  My download and upload slow to a crawl (only for laptop)

  Usually (according to speedtest.net) I get around a download about 4 but on my laptop it reaches maximum 0.09 dl.

  Whenever I restart my laptop it works kind of during about 10 minutes (I get about a 1 download), but then it slows down to a crawl.

  I confess that I am not the most tech savvy people so I only did the basics (turn it on and try again, other connections, reset the router, connect through a cable) but none of this has worked.

  Any help you could provide would be most welcome.

  Oh btw, my laptop is a
  Satellite C660-258

  Hello

  To be honest I don t understand your problem you have a problem with the internet connection is slow?

  Usually, this is not a problem or computer in the system but the problem with the connection provided by the internet provider (ISP).

  However, you compared the speed using LAN and WLan?
  Did you check the internet connection by using other WLan hotspots or other WiFi network?

  Do this!

• Re: 1670 - back to 98SE - Satellite Internet connection issues

  I used W2K on my 1670 for quite awhile, but it was slowish, so I decided to put in the recovery disks and return 98SE.

  As the laptop is quite old and has no ethernet as the material, I also installed a PC Ethernet Card Bus line and this has been properly installed in Device Manager.

  Have upgraded to IE6, been through the Internet Connection Wizard, settings of the LAN, server proxy automatic etc... However, the IP address is always zero. I can't fix the ethernet connection and there are options to adjust the dial upwards, but as I do not use that may be unnecessary.

  Is there a problem here? I have not had any problems with my Portege 4000 which had ethernet installed as part of his equipment.

  > Is there a problem here?
  You're joking now? ;) What is a question after 9 years.

  You use laptop at home connected to the DSL router?
  A firewall is turned on?
  You can assign the IP address manually?

• Internet connection issues "Limited or no connectivity." and "windows could not find a certificate to log on the network.

  I'm so unable to connect to the internet?

  Hello.

  I'm so unable to connect to the internet.

  Since I've renamed our WiFi network and add a WEP key, I have problems with wireless connection on my
  Windows XP computer desktop, which is a Dell Dimension 4700.

  The questions that I get connection are...

  "windows could not find a certificate to log on the network.

  "Limited or no connectivity."

  I did all the solutions I could try to fix the connection problem!

  1. once I received the message "limited or no connectivity", I click with the right button on the connection and click on repair. It is not always connect for me and I got the "limited or no connectivity message.»

  2. then, I disabled the network connection and then enabled. That no longer works.

  3. I tried to withdraw from the ordered list of connections, and it still doesn't work.

  4. I checked the driver manager, and initially the Ethernet driver was outdated and missing of its pilot. He had a yellow question mark with a black sign and yellow with an exclamation mark inside.

  5. I used DriverZone, downloaded the driver, installed and rebooted the computer after the installation of the it. Apparently, it worked. But I could not always connect.

  6 I have ensured that I entered the correct WEP key, and then adjust the settings correctly. I did it like 10 times in a row and would not always connect.

  7. I tried to go to the command prompt and typed in IP Config/All and that's what I mean.

  Windows IP configuration
  Node type: unknown
  Active IP routing: no
  WINS proxy enabled: no
  ETHERNET connection to the Local network card
  State of the media: Media disconnected
  Description: Intel PRO/100 VE Network Connection
  Ethernet card 2 wireless network connection:
  Suffix the connection-specific DNS: (EMPTY)

  8. after that, I typed the command: ipconfig/release
  and then I got this error...

  No operations can be performed on the connection to the local network, although it has its media disconnected.

  9. after that, I tried Googling for some solutions, and the solutions I found were not any use.
  A solution was

  10. opening of Services...
  Start | Run | Type: services.msc | Click OK |
  Scroll down to and double-click Client DNS | Set to automatic on startup
  type |
  Click apply | Click the Start button | When it starts, click OK
  Do the same for the DHCP Client.
  Do the same for the remote procedure call (RPC).

  and it still doesn't work.

  11. when I look in the menu network connections, I see my connection with a lock on the side, with a red X under the lock and key. In the description, I see not connected, protected by a firewall. How could I remove the internet connection firewall? I disabled the firewall and that did not work.

  12. I tried to uninstall and reinstall the network card and who does not work either.

  It is not the network itself that is the problem.  It is not the modem or the cable. There are no disconnected son or something like that. We have other computers in the House and the internet works fine on other computers. As I said, since I renamed our WiFi network and added a WEP password, I had problems with connecting to my Windows XP computer.

  My computer has updates that must be installed as well. Updates would fix the problem? I just need to have internet.

  What should I do? Thank you for your time.

  Sincerely,

  Justin

  Have you tried to set the value of the link speed/duplex mode? I had the same problem you describe. Your card is only capable of 10/100 communication.

• How to troubleshoot Internet connectivity issues?

  How can - I individual trouble shoot why internet takes so long to accerss. I use windows home vista.

  It happened all of a sudden. No new download. Not knowing how to recognize the windows updates. can I remove updates recent one in time to see if that helps?  ...... John

  Check vista firewall exceptions, see whats access or should not be... In addition, options for internet chk, chk

  Internet connections. You can also, after editing the above, open cmd, type: netsh Winsock reset

• Internet connection in windows vista issues

  Original title: connection problems

  Hi, I have a problem connecting to all programs use internet (like Skype; gameranger...) my system is windows vista family premium sp2 please help me!

  Hello

  Perform the steps in the article, and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  http://support.Microsoft.com/kb/936215

  Hope that helps.

• Internet connection issues when I start my computer

  When I turn on my computer it does not connect to the internet automatically. When I press on connect, it says that it cannot connect. Also, he can not diagnose the problem. If I restart my computer, it will connect automatically (as usual), but it's embarrassing. Any suggestions?

  Also, I know that's not a problem of the internet, another computer also uses the same internet doesn't have this problem.

  Hello

  ·         What type of internet connection are you using, wired or wireless?

  I suggest you to follow the steps in the link below troubleshooting Internet connection problems:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  I hope this helps.

• x 220 internet connectivity issues

  Hi all

  I got my X 220 for over a year and have never had any problems in the past.  For the last few days I had a moment hard internet connection and I really need help.  Thanks in advance for your help.

  Here's what I know:

  My X 220 shows that it is connected, but it cannot load any Web pages.  I've reproduced the problem on 2 different wireless networks and wired ethernet connection.

  I checked the other 3 devices (phones and netbook) can connect and work very well on all the above-mentioned networks.

  I have reset my modem several times.

  I did a restore of the system at the beginning of August, and when I do this my internet connection returns, however, painfully slow loading pages.  I think I still have a fast enough connection because when I load google maps it takes time to load the page, but once it does, I can zoom in and out extremely fast cards.   Unfortunately, once I have turn off the machine or he falls asleep, the connection is no longer work once I'm back on.

  I ran all programs Microsoft and Lenovo diagnostic/troubleshooting without success.

  I turned off all firewalls and security software.

  I used Lenovo diagnostic program to test everything (all this happened) and have checked my network drivers are up-to-date.

  Finally, it started to arrive a day or two after that, I got a big update Windows.  I don't know how long after the update that I started having problems however.

  Does anyone have ideas for helping me restore my network connections?  My warranty is out since last week

  Thanks again,

  Jason

  androsooner,

  By chance do you use Mcafee antivirus? If you are, you see below.

  http://service.McAfee.com/FAQ/TS101446.htm

• Windows 7 Internet connection issues

  I have a Dell desktop for 2 years and has worked well before.

  Recently, the hard drive was broken down and Dell has replaced a new hard drive for me. When the hard drive is replaced, the Windows 7 (64-bit professional) was necessary to re - install. Subsequently, there is a problem for internet connection.

  When I connect the computer to the internet through a router or directly to the port, it works very well for the first 10 to 15 minutes. Then it stops. If I click on refresh in the browser, I need to wait for a few minutes until connectivity active again, but it lasts for only 1 to 2 minutes and stops again. And I need to wait a few minutes... and so on.

  If I connect to the internet through the router, when this problem occurs, it will affect other computers (Windows XP and Vista), no matter via LAN or wireless. Zero the computer can connect to the internet. And when the Dell computer is able to connect to the internet at this "1-2 minutes', the other computers can connect as well, also as"1 to 2 minutes"

  If I turned off the Dell computer or unplug the cable from the Dell computer, other computers are working perfect.

  I thought it might be the card network problem, so I tried the Ethernet USB adapter instead. However, the same problem persists. So, I guess it could be due to Windows 7.

  I am sure that this is not a problem of my ISP, not the router, not on the cable and should not be the network card (unless the connection via USB Ethernet Adapter still needs to go through the network card)...

  Anyone know how to fix this? Please teach me in detail, thank you.

  Thank you for all.

  I discovered the problem already.

  I have installed KM Player as my Media Player, and it includes a program called "PA... TV"(I forgot the name and surname). This software does all the problem I mentioned above.

  After that I uninstalled the AP «...» TV', the problem does not exist until this moment, do not know the future...

  P.S. I still don't know why the AP «...» TV"blocked the connection regularly. I also installed it on my computer at home, but using Windows XP. He has no problem at all. Don't know why it has problem in Windows 7