Noisy computer.

Similar Questions

• What are good Options for installing Linux on a Mac?

  I have a Macbook Air in 2013 with a SSD 256 GB and 8 GB of memory. I have 80 GB free. I have Hyperacusis and had problems with a noisy computer a few years back, so wanted to avoid noisy readers.

  I need to be able to access my files from either OS X / Mac OS or Linux. This is the biggest problem. If I can't work on the same files in OS X / Mac OS and Linux, I can't really do much with Linux.

  I have trouble with some accessibility problems in OS x:

  1. I have sensory problems and need to disable more animation and more still of the blinking cursor. I used a hack to disable flashing cursors in some applications, but it does not work in LibreOffice, Pages, Mail, etc. It should work in Scrivener, and I plan to spend to Scrivener. He also works in bean and Textedit.

  2. I have problems of coordination/proprioception and could use the wider scroll bars. I currently use Scroll + scroll software, but it doesn't go anywhere. I could use a version of sticky keys, but the current version is not yet there. It shows the active keys on the screen, but I need to update t on the keyboard.

  I will need to avoid some problems of accessibility on Linux:

  1. I have sensory problems and you will need to disable the animation and flashing cursors. I need to be able to boot Linux with minimum brightness. I tried Kde always open in blinding brightness.

  2. I have problems of coordination/proprioception and need to disable the touchpad gestures and listen; This required a patch kernel in Ubuntu, which meant running a non - lts version, which meant not being not able to use the Ubuntu repositories after support missed. I need to be able to keep the visible scroll bars and expand their. Sometimes, I need to use a software of scrolling.

  One option is to use refined and a full install. It's intimidating. I'm done with installation of Xubuntu broke at some point because it crashed while it was installing. Another option is to use VMWare Fusion or Parallels or an equivalent Mac of Wubi.

  One of these options would allow me to access my files from Linux? Those who would work with my lack of experience and power limited processor programming limited disk space?

  Thank you.

  Yes, I would say that all VMs are options to save money, I would try to go with oracle virtualbox, it is free I use osx to run a Windows 10 and machines virtual ubuntu it allows me to access the files across, although you mind a program under osx, maybe not 100% safe to use the same format as the same program under linux so that could cause a problem if this is the case.

• Portege R700 - high CPU fan noise

  Hello

  I own the Canadian version of the Portege R700, called Tecra R700 (PT319C-00E002).
  The CPU fan always runs between 43 percent and 51 percent (regardless of the mode of selected frequency), which makes the noisy computer - too noisy to be used comfortably, too noisy to be used at meetings of air-conditioned silent.

  The fan seems to be controlled by the BIOS, as well as applications such as SpeedFan are unnecessary. Is there a way to fix this?

  Kind regards.

  Hi dernierrecours,

  > CPU fan always running between 43 percent and 51 percent (regardless of the selected frequency mode)
  This means that the fan runs always at the same level regardless cooling method that you can choose in Windows power management?

  Well, have you tried updating the BIOS? The latest version is installed?
  Check out the Toshiba page for an update.

• HP 310n

  I have a HP 310n P7492A who needs a new power supply.

  The old man is dead and has been replaced by a second-hand, and it does not work well (noisy, computer crashes often, etc.).

  My question is - does take HP 310N 180W or 300W power supply replacement?

  Thank you

  MA310n

  MA310n,

  Had to think on this subject! The former 300 series used the micro ATX 5 "(W) x 2.5"(H) x 4 "(D). Here's a300Wthat will work.

• Cannot start windows in safe mode, the work of restoration but still cannot start unless in safe mode

  After a microsoft update beginning 04/04/11 awoke to noisy computer which was start and restart in safe mode.  Pbly. most of the night it was start and restart.  System Restore tried to 3 or 4 different dates, said has been restored, but this does not solve the problem.  Have you tried troubleshooting, nothing helps.  Worked on it for several days without any positive result.  Any advice will be appreciated.

  Hi Grandma fla,.

  1. you remember what update was installed before that the problem occurred?

  2. do you have security software installed on the computer?

  Method 1

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  If the previous step fails, then you perform the clean boot in order to verify if any device on the computer is the origin of the hardware problem.

  a. click "Start", type "DEVMGMT. MSC"in the search text box and press ENTER.

  b. expand ' audio, video and game controllers ".

  c. right click on your sound card, select "Properties".

  d. click on the "Driver" tab, click Disable the selected device. Click OK

  e. Please use the same method to disable other devices such as: Modem, network card, CD - R drive. Please note that some devices such as the video card are not available should be disabled.

  f. restart the computer and check if it works.

• The computer starts very noisy until Windows starts

  Starting the PC with new GPU Quadro - YouTube

  Watch the video. As the computer starts, it becomes very noisy. I thought it was the GPU as a first step, but it doesn't seem to matter which GPU is installed. This has happened for a while now because I have built this PC a few weeks ago. It was very quiet at first. Could not yet say that it was on. And now this terrible noise that I can't explain.

  I removed a GPU, then the other. I guess it's the motherboard or a fan making the noise - I can't imagine moving parts on the motherboard that could make that noise. Anyway, once Windows has fully booted most of the noise dies down with the exception of a little rattle noise. But not as quiet as it once was.

  I posted on forums of PNY and NVidia on this, but I don't expect much response because it is looking as if it was not GPU bound at all. I'll try ASUS then

  core i7 - 4930 K 6 3.4 GHz processor

  ASUS P9X79 - E WS motherboard

  64 GB of Corsair Dominator RAM

  ASUS Direct CU II OC / 3 GB GeForce GTX780

  PNY Quadro K4200

  Intel 530 OS SSD series engine

  Good news! It was one of the case fans. Interference with a cable or on the side of the cover. Of course, the less accessible fan, but I had

• My computer (gateway GT5404) becomes noisy when you run the windows media player, often when you use the interent and frequently when loading files/photos or download. What is a hard drive problem?

  My computer did this for about a year. It is currently 4 years with 1 GB of RAM.

  JBW

  Could be HD or thermal / fan.  I want to download cpu - z and gpu - z (both free) to check the time.

  I also get the HD of the Lim diagnostic utility and run it to check the HD

• My computer makes a humming sound noisy, suddenly whenever I'm playing music.

  I'm having the same problem of snoring.  It happens in Google Chrome, Microsoft Internet Explorer, Mozilla Firefox, Windows Media player, essentially all the music or video content acts as buffer does not work.

  Yes, Crashplan that made it was that my computer to stutter.  Microsoft issues forum does not appear to have a way to compose your own answer, an answer, but that's it.  So if someone else want to parrot just my post here, I can give you an answer of credit.

• G7-2017us Pavilion: laptop computer is hot and the fan is noisy

  I have windows 7. 64 bit. I noticed that the laptop gets very hot and the fan makes noise. Try to solve this problem I went the HPSA. It shows that I have no update necessary; However when I go to the HP site and I ask him to identify my system it shows a lot of updates pending. This is why I need help with 2 questions, one the heat generated and the second on the updates. I also checked, and it shows that I have the latest version of the Support Assistant. The updates are all from 2016 and 2 refer to the BIOS.

  I'm not well informed on the issues, any help will be appreciated

  The update of the BIOS F.26 is important because of security concerns. The change log States:

  'Provides security improved for UEFI EDK2

  HP strongly recommends transition immediately to this BIOS update. »

  It will not hurt to delete the sp66805 folder. I suggested it because it confuses you with the process of downloading/installation asking you to replace it.

  You could try to change of name, it will probably work.

• Pavillion G6: My computer laptop fan is very noisy.

  My laptop seems to have a problem with noise, the fan will not quiet. Ever since the day that I bought this laptop he made the noise even when sitting at a desk with ice UNDER him. Too bad for HP "meaning cool." I turned off 'fan always on' in the BIOS it makes just about 3 percent quieter. Yes I'm sitting at a desk with her and I have regular fan clean outs. Please help me.

  ______________________________
  Its about whats under the hood is not on the software.

  Dear customer,
   
  Welcome and thanks for posting your query on the Forum from the HP Support
   
  It seems that your laptop is matter of fan noise because of which maintain the laptop may be turning to THE sometimes
  We will surely help you with this problem
   
  Please perform the steps to solve the problem below:
  1. you need to clean all vents and openings that are really good with a can of compressed air
   
  2. check if the fan is running when the power adapter is connected
   
  3 boot into BIOS > System Configuration > Device Configuration > enable ' Fan always WE.
   
  4. update the latest BIOS and graphics driver
   
  Note: Snacks, even after these steps, if the same problem persists then remove and reinstall the fan
   
  Please click the link below to find more steps involved in this problem

  http://support.HP.com/us-en/document/c01657439
   
   
  Hope this helps, for other queries in response to the post and feel free to join us again
   
  * Click on the button white Thumbs Up on the left to say thank you *.
  Make it easier for others to find solutions by checking a response "accept as Solution" if it solves your problem.
   
  Thank you
  GBL84
  Although I am an employee of HP, I speak for myself and not for HP

• irreversible bios update made noisy fan (8710p, 8710w, 8510p, 8510w, fan, F.20, F.0E)

  Hey.

  I just want to share my experience with the update of the bios on my computer hp 8710w laptop and talk to HP support. I've updated F.0E to F.20 and after that this fan went wild. In windows 7 it works very well every boots 2 / 3, or more. All fans of time runs fast, no matter what the system load and temperature are. What makes the portable noisy.

  I used to use linux and it just fan slow down after spinning up to cool the system. It is really something that you want to have, because it becomes a noisy vacuum cleaner with an excellent machine and quiet.

  I have enough evidence to assume that the problem was caused by the update of the bios. First of all, it started exactly after the bios update when nothing else has been changed. Secondly, 5 years ago I had a very similar laptop (8710p) and when I have updated the bios to F.0F, it's the same thing, but I fortunately downgraded the bios and everything was back to normal. In addition, reported others on the internet and these discussion forums.

  Now with the update of F.20... There is no way to downgrade. It's embarrassing: HP has released a update this feature breaks... and there is no way back (except the replacement of the card system, which is expensive for laptops out of warranty).

  I was the cat and then talk on the phone with HP support. They are not really very close to professional. First, they said that my windows 7 is not officially supported and should I install xp or vista. I have xp installed specially for them, and which consumes a lot of time. Of course, nothing has changed. And they actually all drivers for windows 7...

  The best advice of hp support has been trying to install all previous versions of the bios. I reported a failure on each one, then only, they found in the description of the version F.20 could not be downgraded. After reading the forums here for 15 minutes, I knew much more technical support on my laptop and the question, lol.

  After talking with me for a time very long (like 3 or 4 hours) and say that I try to restart my machine, or start with the Windows key + b, etc., they said that my laptop is out of warranty, and there is nothing that they can help me with.

  I confess that the laptop is out of warranty... but only suffers from the update of the official firmware that cannot be downgraded. Yes, I know I'm supposed to buy a new replacement HP laptop. But... This look bad.

  Now, I'll get a replacement bios chip, programmed with the previous version of the bios and soldered to the motherboard...

  Hello to the guys at HP support. They are nice people who try to be useful, they don't know anything about their products :-)

  Hello programmers to the HP bios... Please... Please be better, please learn that bugs can be corrected.

  Problem solved! :-D

  I downgraded to F.0E

  Find a difference in the photos below:

  BEFORE:

  

  AFTER:

  

• Noisy fan on model Satellite U50T-A

  Someone told me everything resolves to a noisy fan? I have upgraded to Windows 10 but has had this problem before. I've tried the settings mode eco but fan still works in the background without the computer that is running hot.
  I saw the previous posts on this issue, but he does not seem to have solved easily and turns into a game works.

  I have BIOS version 1.10 but don't really want to mess with upgrades as they also seem to cause problems.
  No miracle solution would be great that this whirring noise leads me into the wall.

  Have you tried to change cooling option method in advanced power options?

  Usually this should reduce the activity of fan cooling.

• Satellite Pro P200-15W: after Bios Update 1.90 incredibly noisy fan

  Hi, I have a Toshiba Satellite Pro P200-15W, I recently made an update to BIOS version 1.9 and seems to have been a big mistake.
  After restarting the computer, I had a lot of software deconfig and the fan has become incredibly noisy.

  I have the problem with the Toshiba Vista registration software, I get this message: "registration of Vista has stopped working". I read other discussions, I don't want to just disable it in the start.ini file, I would actually solve the problem if there is a way.

  Is there a way to change the configuration of fans? I read a post from Toshiba on another model of laptop that has had the same problem of noisy fans after an update of the BIOS, they gave that a solution with a new version of the BIOS, is there a way to reverse the BIOS to the previous version? (recovery CD will be useful for this purpose)?

  See you soon

  Edgard

  Hello

  It seems that the picture of the fan was changed and renewed in the new version of BIOS, and so fans run fall.
  Why the table fan has been changed?

  Well, usually something like this is necessary to improve the reduction of the internal temperature while the CPU and GPU are running with maximum performance.
  This helps to prevent the equipment from damage!

  Usually, the recovery CD formats the whole HARD drive (partitions too) and installs only the image of Toshiba on the notebooks of HARD drive.
  The image contains the OS, drivers and additional software and has nothing to do with the BIOS update.
  But you can try to recover the laptop to see if you can solve the problems of software as "Vista record"!

  If you want to reverse the BIOS, you will need to contact the ASP in your country!

  Sorry, but all I can suggest.

  Best regards

• Satellite C650 / 01 M noisy fan

  Hi all

  This is my first post and first experience with Toshiba laptops: D.
  So here's the thing, I bought Satellite C650/01 M a few days ago and I noticed that the fan is a bit noisy, it's like a "Bee noise" or "House sound fly" lol, but the temperature of the computer is fine.

  So I'm wondering if this is normal or I have to return it? Any experience with this particular model?
  BTW, here is the link of the laptop:
  [http://dicksmith.com.au/product/XC8927/satellite-c650-01m-notebook]

  Thank you!

  Hey,.

  I Don t Satellite C650, but normally it should be possible to change the method of cooling Windows Power Management. You can change between optimized battery and a maximum Performance.

  I put the battery optimized option and this reduced the activity of the fan and the cell phone was much quieter. :)

• Pavilion h8-1330z: Noisy Hot map video

  CPU has always been noisy but even more so during the month.  It is now about 5 years old.

  Open and clean the fans but found out it was the fan on the video card making all the noise.  My nephew of computer sauvy said I have a HP GeForce GT 630 Graphic Card - 2 GB DDR3 SDRAM - PCI Express x 16.  HP plug only States NVIDIA GeForce GT 630.  I've updated the drivers.  It is always noisy, sometimes grinding sounds. I also check the temperature with an app and it works @ 50 c... which I think is pretty hot.

  Is there a more efficient, less noisy and hot video card I can get to replace the current?  What SHOULD I replace it with the same?

  CPU card:

  AMD FX Processor with eight cores (tm) - 8120

  System memory - 8 GB

  Card system - 2AC8 1.2

  BIOS - 2AC8 1.2

  Video: Video:

  NVIDIA GeForce GT 630

  Resolution - 1920 x 1080

  Version - 9.18.13.3523 (04/03/2014)

  4 044 MB of graphics memory-

  Status of Aero - active

  Will this work?

  PNY - Nivida Geforce GT 740 2 GB DDR3 PCI Express card 3.0 chart.

  Many thxs to one old computer iliterate of semi.

  Greetings,

  The Nvidia 600 series cards will work.

  The GT 740 should also work as your PC has a UEFI BIOS. Your version of BIOS is 8.xx. Your PC is in the Group of PC having the first implantation of a UEFI BIOS. So that's why I tell you one '740 should run'.

  You will need to check that your power supply can handle a GT 740. 740 requires a minimum 400 watts power.

  You will need to check "Secure Boot" is disabled in the BIOS and 'Legacy Boot' is enabled in the BIOS before installing the new graphics card. You are running Windows 7, so these two parameters must be in effect now.

  Also, you will need to uninstall the graphics drivers from Nvidia to address current before installing the new graphics card.

  Please note that upgrading the graphics card with a different model number card will cause any type of Recovery HP provided the factory, if you need to make one, to fail. Recovery of Microsoft options works.

  You will need to develop a new plan for the backup and restoration of your operating system and data in the event of catastrophic failure.

  Jay