Windows server 2003 service Pack 2

Similar Questions

• Error on Windows 2003 service pack 2 (ql40xx.sys)

  I get the pop following error when you attempt to apply windows 2003 service pack 2:

  Setup has detected a driver (ql40xx.sys) that is not compatible with Windows Server 2003 Service Pack 2. If please contact QLogic for an updated driver and restart the installation.
  It is a 2003 physics attached to the initiator iSCSI via MS iSCSI storage server
  I searched on several forums resolution and there is limited information everywhere associated with this error message
  Here's the whole svcpack.log journal entry
  3.063: 20/03/2013 03:56:46.133 (local)

  3.063: C:\WINDOWS\SoftwareDistribution\Download\f6beed31356960099b028c3b7e0f7fc3\update\update.exe (version 6.3.4.1)

  3.063: service Pack started with following command line: /ParentInfo:2e2d6a92fab565479ffd0c74fb0be2d5 /if

  3.063: in function GetBuildType, line 1170, RegQueryValueEx failed with error 0x2

  3.141: return the value of OnACPower = 1

  3.141: OnACPower returns the value (0 x 1) that is equal to 0 x 1

  3.141: condition succeeded to the OnACPower.Section section in row 1 prerequisites

  3.625: C:\WINDOWS\system32\HAL InternalFileName. DLL is not equal to halcmpx.dll

  3.625: condition succeeded to the CustomHalUnisysBlock.Section section in row 2 of prerequisites

  3.625: C:\WINDOWS\system32\HAL InternalFileName. DLL is not equal to Unisys CMP Server ACPI HAL

  3.625: first condition in CustomHalUniSysBlock.Section2 succeeded

  3.625: condition succeeded to the CustomHalUniSysBlock.Section2 section in line 3 of prerequisites

  3.625: C:\WINDOWS\system32\HAL InternalFileName. DLL is not equal to HALSRAAC. DLL

  3.625: condition succeeded to the CustomHalStratusBlock.Section section in line 4 prerequisites

  3.625: C:\WINDOWS\system32\HAL InternalFileName. DLL is not equal to halce52.dll

  3.625: condition succeeded to the CustomHalMarathonBlock.Section section in line 5 of prerequisites

  3.625: service SpUpdSvc not registered in SCM 0 x 424

  3.625: condition succeeded to the SpUpdSvcBlock.Section section in line 6 requirements

  3.625: start is present

  3.625: SYSTEM\CurrentControlSet\Services\MSDTC\Start is not equal to specified value

  3.625: second Condition in MSDTC. Not.Disabled succeeded

  3.625: condition succeeded MDSTC section. Check.Disabled on line 7 prerequisites

  3.625: C:\WINDOWS\system32\DRIVERS\elxsli2.sys is not present

  3.625: first condition in Emulex.Driver.Compat.Check.Section succeeded

  3.625: condition succeeded to the Emulex.Driver.Compat.Check.Section section in line 8 of prerequisites

  3.625: C:\WINDOWS\system32\DRIVERS\ql40xx.sys is present

  3,672: C:\WINDOWS\system32\DRIVERS\ql40xx.sys FileVersion is less 2.1.3.9

  3,672: Check condition for line 9 of prerequisite returned FALSE

  3.984: installation of Service Pack 2 has encountered an error: Setup has detected a driver (ql40xx.sys) that is not compatible with Windows Server 2003 Service Pack 2. If please contact QLogic for an updated driver and restart the installation.

  4,000: UnRegisterSpuninstForRecovery, failed to delete SpRecoverCmdLine, 0 error value x 2

  4,000: DoInstallation: has no cancellation of registration of spuninst.exe for recovery.

  4,281: Setup has detected a driver (ql40xx.sys) that is not compatible with Windows Server 2003 Service Pack 2. If please contact QLogic for an updated driver and restart the installation.

  4,281: Update.exe extended error code = 0xf0f4

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Windows Server 2003 SP2, not bootable iso

  The downloaded ISO file of TECHNET is not bootable, how can I make bootable so that I can create a virtual machine from him.  Pleae be explicit as to how I can make the ISO bootable, or, how I can use the ISO file to create a virtual withput machine it is bootable.

  I just took a glance on the MSDN web site. FFL you downloaded is "Windows Server 2003 Service Pack 2 (x 86) - CD (English)" that contains only the updated SP2 files. What you should look for is a file named for example en_windows_server_2003_with_sp1_standard.iso 'Windows Server 2003 Standard Edition with SP1 (English)'.

  André

• VMware server 2.0 and Windows server 2003 sp1 Ent

  I got windows server 2003 SP1 on vmware 2.0, I upgraded the OS to SP2 now operating system shows no network adapter

  where as the hardware vmware 7 shows the network connection... of suggestions which could have caused this... ?

  as if now I drove back the SP2... However, I would like to upgrade to sp2

  Hello

  Just to confirm, you run server 2.0 or 2.0.1? According to the guest operating system comatibility link

  Microsoft	Windows Server 2003 Enterprise Edition SP2	32	Guest operating system	Server 2.0\
  Microsoft	Windows Server 2003 Service Pack 2 x 64 Enterprise edition	64	Guest operating system	Server 2.0\

  are supported assumes that, if this seems a little strange behavior. Once you upgrade the client, the tools work properly? When you say vm HW version 7 shows the hardware, what do you mean?

  Thank you

• Windows Server 2003, SMall Business and Window XP Service Pack 3

  I have a Windows Server 2003 with Service Pack 3 for Windows XP.  We could always map drives and view readers to share.  However, we got a worm and it took 2 days to solve this work with Trend Micro.  Now 2 workstations see actions at some at the main level but not the

  sublevel.  But the other 2 workstation works very well and see the level of sharing.

  Example \\newserver\data\excel

  Two of the workstation can see full share and the other two can see that \\newserver\data.

  How can I get them to display full share.

  Microsoft Server experts hang out in these forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  The forum you are now supports Windows users and is not the best place for your question.

• Windows 2003 Service Pack 1 free not updated from the Windows Update Site Security.

  For all 3 months one of our Windows 2003 servers that are not on the service pack 2 not available updated safety when you go to the Windows Update site.  They are available to the malicious removal tool and the stop bits, but nothing else.  The 2003 SP2 servers work very well.  Can someone help me with this?

  Thank you

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512919.aspx

  Windows Server 2003 communities above link.

  Forum tab at the top.

  This is the Forum for Windows Vista update.

  See you soon. Mick Murphy - Microsoft partner

• VMware Workstation 7 not able to install in Windows 2003 Service Pack 2

  Hello gurus,

  Could you please help me how to install vmware Workstation 7 Server in Windows 2003 Service pack 2.

  Set up the file does not start... It's window closes immediately.

  Thanks for your help

  Kind regards

  DK

  work here on 2 k 3 - sp2 - read http://sanbarrow.com/workstation-faq.html#setup

  Perhaps one of the tips to help

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• TCP/IP services has encountered a problem and need to close. Windows Server 2003 R2 SP2

  TCP/IP services has encountered a problem and need to close.

  Windows Server 2003 R2 SP2

  That left me without a network or to the Internet on a PDC named DOMCON.

  Tried so far:

  1. last signed NIC drivers installed (8.0.27.0) to HP NC3120 Fast Ethernet NIC.

  2 netsh int ip reset resetiplog.txt

  reboot, enter the details of the intellectual property, etc... NO JOY!

  This server has been running for years until now.

  I can join the registry and files DOMCON_MpsReports.cab NetworkSubkey.reg section.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  Here is the link:http://technet.microsoft.com/en-us/windowsserver/bb512919.aspx

• update of sql server 2005 service pack 3 error code 6D9E Windows update security does not accept the update

  update of sql server 2005 service pack 3 error code 6D9E Windows update security does not accept the update

  Hey lasdj,

  Thanks for posting in the Microsoft answers site!

  If you receive Windows Update error 6d9e while installing SQL Server 2005 Service Pack 3 by using Windows Update, it means that the installation folders and directories are compressed or encrypted.

  To fix this problem, make sure the folder locations where you are installing the service pack to aren't compressed or encrypted, or specify a different folder and then run Windows Update again.

  Therefore, remove the compression of the DATA directory and run together to the top again.

  Remove compression from the C:\Program Files\Microsoft SQL Server folder and see if you are able to install the updates without any problem.

  See the links below for more details:
  
  Windows Update error 6d9e
  http://Windows.Microsoft.com/en-IE/Windows-Vista/Windows-Update-error-6D9E 

  Install SQL Server 2005 and 2008 failures (compressed DATA directory)
  http://blogs.msdn.com/psssql/archive/2009/02/24/SQL-Server-2005-and-2008-Setup-failures-compressed-data-directory.aspx

  I hope this helps!
  Gokul T - Microsoft Support

• Windows Update, error 0x8024002D. Office 2003 Service Pack 3.

  Original title: error 0x8024002D code

  I get this error code while installing the automatic updates.

  It tries to install office 2003 service pack 3 (sp3)

  and he can't find pro11.msi

  Error code: 0x8024002D
  means - a full-file patch has failed because the source was necessary

  If you download a patch, repair the Office installation and try the patch or try to install the patch with the Office CD in the installation drive.

  Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0x8024002D".
  http://support.Microsoft.com/kb/958041

  http://Office.Microsoft.com/en-us/assistance/HA011185721033.aspx
  Locate missing .msi files

  Pro11.msi = Microsoft Office Professional Edition 2003 - put this drive in installation drive.

  TaurArian [MVP] 2005-2011 - Update Services

• Windows Update - a security update to the SQL Server 2005 Service Pack 3 (KB970892)

  How to install Windows Update security for the SQL Server 2005 Service Pack 3 (KB970892) when he continually fails to install.

  Provide as much information as possible and try this forum.

  The SQL Server installation & set program at level
  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/ TaurArian [MVP] 2005-2010 - Update Services

• I'm Zenith one 733F error Code when I try to install Windows Vista update to SQL Server 2005 (Service Pack 2 KB970895).

  I'm Zenith one 733F error Code when I try to install the latest Windows Vista Update, which is an update to SQL Server 2005 (Service Pack 2 KB970895).  This update has failed several times now.

  I followed the advice given in a separate post in this forum at Ramer49 to perform a selective startup with msconfig to try to run the update with all Microsoft Services disabled.  This does not solve the problem.

  I spent reviewing the logfile under C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log.  The problem highlighted is that the Services of Services SQL2005 database program did not start.  Here is an excerpt from the log file...

  Product Installation status
  Product: SQL Server Database Services 2005 (MSSMLBIZ)
  (Previous) product version: 3077
  Version of the product (Final):
  Status: failed
  Log file: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log
  SQL Express features:
  Error number: 29503
  Error description: error MSP: 29503 The SQL Server service could not start. For more information, see the

  I tried to run the problem file (SQL Server MSSMLBIZ) directly by using the Windows administrative tool, but the file does not seem to start successfully.  Event Viewer log contains an error with event ID = 823.

  I don't know what to do next.

  Can someone help me?

  Thank you.

  Take a look at this link as it covers a way to fix this problem. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP Setup: Netframework 2.0 SP2 on Windows server 2003 and generic process for win 32 services

  I have Windows XP. Since May 15, when I open and close my PC, the same updates seem to be installed: Netframework 2.0 SP2 on Windows server 2003 and Windows XPx86 KB2804577 and successfully installed several times per day, approximately 33 in total so far. Is it OK? How can I stop it?

  In this time (also some time before)

  When I open my PC a pop up displays: generic process for win 32 services... to allow or not allow.

  Then: I have not authorized it.

  I will allow, when he will appear again?

  and that's why the same safety NET Framework 2.0 appears again and again, when I open and close the PC?

  What should I do?

  Kirsten

  Dot Net 2.0 has an update to 'fix' his kb928365

  Also, the 2.0 is old enough, have you tried to update for .net 3.0 or 3.5

  Try this link to update 2.0, youre problems will probably end.

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=21

  Also, once installed, go to windows update...

• LIMIT OF THE SERVER COMPUTER (WINDOWS 7 PRO SERVICE PACK 1)

  Hello

  Nice day.

  I have a server with window 7 pro service pack 1 computer. AFAIK, there are up to 20 eligible device to connect to the shared folder.

  However they allow up to 11 computer to access the shared folder on the server computer.

  When the 12 computer tried to access the shared folder on the server computer, it pop of a statement that he said already reach the maximum of the relationship.

  I confuse myself because the connection will not exceed 20 connection and he just stuck the next connection to the folder shared on the server computer.

  Please advise us of the solutions to this problem.

  Thank you and best regards,

  Tony

  Beyond the declaration is the statement you mention?

  However now only 11 device (computer) which connect to the shared folder. So that means that only 11 connection. When 2 or 3 more connections to the folder shared, he pop of a declaration that he State already reach the maximum of the relationship.

  It comes to education, to which I was referring.

  I don't know why you should be unable to do more than 11 connections. In this case, I use Google to search, type the exact error message in the search box. Chances are that someone else has had the same problem and found a solution.

• Windows Server 2003 and MSXML 6.0

  I need to install MSOffice 2010 on a server that is running Windows Server 2003 SP2, unfortunately I encounter the error:

  The installation program is unable to act because of the following error:

  The installation of MSOFfice 2010 requires MSXML version 6.10.1129.0 to be installed on your computer.  Install this component and restart the installation.

  Fairly straightforward error message, I have so from Microsoft Core XML Services (MSXML) 6.0 Service Pack 1 and went to install this.

  Unfortunately, I encountered a problem when trying to install MSXML6.0, which is:

  This installation package is not supported by this processor type, contact your product provider.

  I guess I'm trying to use an incorrect version of the MSI, but I can't seem to find anything other than:

  msxml6_ia64.msi

  msxml6_x64.msi

  msxml6_x86.msi

  Who all seem to not what I'm looking for, I tried google MSXML 32 bit but without much luck.

  I was wondering if thing exists or if anyone has any advice that could help me please?

  Thank you very much for looking.

  Kind regards.

  Hello

  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Office 2010 - planning, deployment and compatibility TechNet Forums

  Let us know if you need help with Windows related issues. We will be happy to help you.