Virus + HIREM ceased from Windows startup - SP2 disk stolen - options?

Similar Questions

• can I copy the file .iso from window of a disk to another drive and can copied .iso file of window to be used to make bootable USB key?

  can I copy the file .iso from window of a disk to another drive and can copied .iso file of window to be used to make bootable USB key?

  I have the iso image of the window, and I want to copy the iso file on my hard drive for pen drive to make the bootable USB key in the future. So I want to know that can copied .iso file of window et to make the bootable USB key?

  Discussions were merged.

  Deleted duplicate.

  Hello

  This should help you.

  How to create an Installation USB Flash Drive with an ISO file:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  See you soon.

• How to fix 7B BSODs after migration from Windows XP sp2

  Problem: Blue Screen Of Death (bsod) 7 b immediately after the migration wizard built the virtual machine.  Safe mode does not work and results in even.  Last step reported is mup.sys.

  What I want to do: go to the macbook pro and be able to run my old Windows apps (MSoffice, Quicken, with my office vpn, etc) on my migrated files.

  Host: macbook pro, max OS X 10.6.7, 2.3 GHz Intel i5, 4 GB 1333 Mhz DDR3

  Running VMware Fusion v 3.1.2 (332101)

  Comments:

  Value of the property

  ------------------------------------------------------------------------------------------

  Model KT333CF-8235

  AMD Athlon XP processor

  CPU Socket Socket

  Upgrade processor support ZIF

  System slots 4 PCI, 1 AGP

  Type of machine AT/AT COMPATIBLE

  Space disk C: 9 GB available, 39 GB Total, 9 GB for free

  Disk D: accessible 10 GB, in Total 19 GB, 10 GB for free

  Disk E: 18 accessible GB, GB 107 in Total, 18 GB free

  Disk F: the 16 GB available, altogether 48 GB, 16 GB free

  Drive T: 8011 MB available, 8056 MB in Total, 8011 MB free

  1024Mo of physical memory total, 144 MB free

  Memory load 85%

  1952 MB of virtual memory total, 1152 MB free

  SwapFile 1024 MB

  OS Windows XP_Home sp2

  Installed the VMware tools: version vmware-converter 7.0.1.6272

  ==================================================================================

  What I tried:

  Boot into the bios and check the settings:

  -My guest use IDE controllers to talk to 2 physical hd

  -having regard to the many KB articles on scsi drivers, but I don't seem to need any

  -the main drive has partitions C, D, E, F

  start of the repair console of sp2 cd-rom WinXP_Home

  -a ran chkdsk/p

  -a ran fixboot

  tried to repair the virtual disk using vmware-vdiskmanager

  each element runs great but continues to 7B bsod

  My copy of Windows XP_Home sp2 is a upgrade disk and I have the CD key

  the original version full.

  Attached:

  .vmx showing current config

  screenshots of bsod

  Hello

  Welcome to the VMware community forums.

  Looks like you have already tried a few things!

  You're right, normally a 7 b error is related to not having the correct scsi drivers installed, but that your virtual machine using IDE disks, is not what causing errors.

  I did a quick search on google and you should be able to disable the mup.sys (multi unc provider) that is used for novell networks using the windows recovery console, the problem is more likely to be due to a corruption of the windows registry.

  It's probably better/easier to run windows repair installation of windows.

  I guess you have your original windows machine always there in case that you need to return one step? If this isn't the case, so always make a backup before proceeding with the steps like these. Of course, you can also use the capture feature instant molten, but is never the replacement for a real backup.

  --

  Wil

• I need help disabling programs from Windows startup

  I followed the help instructions exactly to eliminate a program that opens at startup. The last step in the process was to choose the program that I wanted to stop, and then click the button 'delete '. When I chose the program, the button 'Delete' no was not available (was "faded"). Now what?

  original title: startup program

  Hello

  To change the startup in Vista programs, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  And a large number of programs can be stopped to start start by opening the program > tools > Options > select no not to launch at Windows startup.

  See you soon.

• I get a bootstrapper error and when I went in the lineage page that another user has been offered and checked the system requirements, it appears the installation of Player 10, although it offers Windows XP sp2 as an option in the download, the system

  I tried three times successively to download the Player 10 upgrade my system pushes me to and continue to get a "bootstrapper" error message interrupt the installation.
  I tried already the linked page suggested to another author of the question with the same problem and get a message that I have not found in the download process, about the system requirements.
  The download site in fact allows to select your Windows XP SP2 operating system, but on the page linked toubleshooting, system requirements do not support anything earlier than a Windows 2010 server.
  Is no upgrade to Adobe Reader available for Windows XP SP2 version 2002?

  The Windows operating system older Adobe Reader can still be downloaded is Windows XP SP3 or Windows XP SP2 (64-bit).

  The latest versions of reader for these are 10.1.10 or 11.0.08.

  You can try to install one of these versions of Reader for Windows XP SP2 (32 bit), but there is no guarantee that it will work.  Use Setup http://get.adobe.com/reader/enterprise/ offline

• How to recover files deleted from windows Vista Sp2?

  I lost a bunch of files system - a few apps. do not work correctly under Vista.   I is not a disk recovery and would like to preserve as much as possible with the existing settings.   I have Sp1 and Sp2 and installation disks.  However when I try to reinstall, the answer is that they are already installed and the re - install fails.  Under Xp, it was easy to do to repair a corrupted installation.

  I lost a bunch of files system - a few apps. do not work correctly under Vista.   I is not a disk recovery and would like to preserve as much as possible with the existing settings.   I have Sp1 and Sp2 and installation disks.  However when I try to reinstall, the answer is that they are already installed and the re - install fails.  Under Xp, it was easy to do to repair a corrupted installation.

  Hé jlive

  try a system restore before you did

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and try this

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  and you would like to read this how to make a vista repair install if you can borrow a microsoft dvd vista

  This way of vista replaces how it was done in xp

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Walter, the time zone traveller

• file recovery from Windows 7 missing in boot options

  My loptop completely collapsed work after that a blue screen of death took now place their and error at start up and it does not load windows 7 seems to be missing my hard drive could recover from this? is there a way to run my drive of windows 7 is broken and have no way to get a new one? is my hard drive died a need a new? Why do we say that my part is locked? Thank you for your time

  Hello

  Test your hard drive

  Go to the website of your computer manufacturer > search your computer specifications > know brand of hard drive > access the Hard Drive manufacturer's Web site > find and download hard drive Diagnostic software and make a record of start of it on the computer that you use to get here, following their instructions > test your hard drive to see if it has failed.

  And you can also use this method to test your hard drive:

  "SeaTools for DOS.

  http://www.Seagate.com/support/downloads/SeaTools/

  "SeaTools for BACK tutorial.

  http://knowledge.Seagate.com/articles/en_US/FAQ/201271en

  @@@@@@@@@@@@@@@@@@@@@@@@

  If it's OK:

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  "This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

  A system repair disc is not able to install Windows 7.

  Note

  If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  _____________________________________

  Then, use this disk for System Recovery Options:

  "System recovery options".

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  See you soon.

• After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

  Hello

  After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
  Then a window pops up saying "Startup Repair cannot repair this computer automatically.
  The details of the problem say;
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadDisk
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem

  System Restore does nothing, and all the other tools of recovery. :(

  Please help, it will be much apreciated :)
  DOM

  If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!

• My computer guard direct me to the Windows Startup Repair loop. Is this a virus? If this is not the case, what should I do?

  OK, here's a little history:
  When was surfing the Internet (using Mozilla Firefox), he froze and said that he "did not." Then I left the computer alone for a good 15 minutes, but to realize that nothing happened. From there, I decided to disconnect the computer to see if I can re - open Firefox. But when I tried to connect it back, the computer take me on the desk. It was stuck at the screen that says 'Welcome' (the form that appears after clicking on your user name) in the end, I turned off the computer by holding the power button, because there was nothing I could do. When I turned on the computer a few minutes later, it was time that I met a huge problem.

  The problem:
  When I turned it back on, a black screen appears that gives you the ability to boot your system with a repair on your computer, or start normally. I chose "start normally. After that, it took me a blue screen with a window that says "Startup Repair". He began to scan the computer saying «attempted repairs...» "When I saw this, I turned immediately shut down the computer, thinking it was some sort of virus that pretends to fix the computer. Nevertheless, I decided to turn it on for the second time. Of course, it's the same thing. But this time, I allow the scanning process to complete. When it was over, he said that the system could not be repaired and advised me to contact Microsoft, with my "contact information." I took this as a red flag, and click Cancel. I suspected it was an attempt to identity theft. (Though, I could be wrong, of course.)

  Honestly, I don't know if if there is indeed something wrong with the computer or if it's a virus.

  I tried to find out by going online and looking for solutions. From there, I tried a method where you press F8 several times until the Advanced Boot Options go up and selected "Last known Configuration" that did not work. I also heard on the "chkdsk" method, but I don't know how to do and there is no guarantee this will work.

  After that, I did more research and realized there were several ways to solve this problem. But when I went through the tutorials, the steps have been very confusing to me. I felt like most of these tutorials aimed computer technicians or people who knew in fixing computers. The steps were so confused until I found myself referring more questions than real answers!

  So now I'm reaching out to help, and I really need! It would be greatly appreciated! I really don't want to format all my data.

  Please keep in mind that I am a lover of computers operating. The two programs I normally use are Mozilla Firefox and Microsoft Word. So please don't be assuming that I know my way in and out of a computer. I'm no where near, in every sense of the term, an 'Expert '. If you can, I would like a simple, easy to follow, simple tutorial, step by step, which is not turned to professional users. Still, I am not very competent in operating computers.
  

  Hello

  You have tried yet.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

  p.s. If the message is genuine, please read this:

  The startup repair options are provided with a large number of systems of operating pre-installed.

  If this does not work, please read this

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

• Reinstalling windows xp sp2 when I got an error that says that the installation program could not copy migregdb.ex_ from the cd.

  Setup cannot copy files?

  I did a reinstall of windows xp sp2 when I got an error that says that the installation program could not copy migregdb.ex_ from the cd. Please make sure the disk is in the e: drive and try again. I can locate the file and find no problem sound on the disc. Here is a list of the files that gave this same error.

  migregdb.ex_
  icwconn1.ex_
  ICWCONN2.ex_
  INETWIZ.ex_
  icwhelp.dl_
  icwutil.dl_
  icwrmind.ex_
  ICWDL.dl_
  icwx25a. COURIER
  icwx25b. COURIER
  icwx25c. COURIER
  ICWIP. COURIER
  Phone.ic_
  Phone.ve_
  State.ic_
  MSICW.is_
  MSN.is_
  support.ic_
  Msobshel.ht_
  ISIGNUP.ex_
  icwtutor.ex_
  icwres.dl_
  trialoc.dl_
  Oobeinfo.in_
  Oemlogo.gi_
  Mouse.ht_
  ISP.ht_
  Oempriv.ht_

  I know that the volume control does not work, and that the windows sounds are not listed, if you try to change the sounds on the system. As the noise of opening and closing session. The drive installed on a different hard disk on the same computer without error, it should not be dirty or damaged. If anyone can help with this please?

  JOEY

  To the file copy stage of the registry would be game.  It could be a permissions issue, you could mount the drive in a different Windows NT installation type and set the permissions.

  John

• Restore files and settings from my old Windows XP system to the newly installed Windows XP SP2.

  My old Windows XP no longer works correctly - it would start to Windows, but that restart. Otherwise, all data and system files on the hard disk are completely legible [no error reported by various scans].

  I made a copy of that old hard drive [with the problematic Windows XP] on a partition of my drive hard [second] another [using EASEUS Partition Master to copy the whole thing - it created an image of all the old hard disk on a special partition of the second hard disk].

  That I took a third hard drive and installed a new Windows XP [SP2] on it. How can I transfer my files and settings from this partition of the second hard disk [which is the image of the original hard drive] third hard disk [which I now use as the bootable hard disk instead of the original one]?

  Can I use "Files and Settings Transfer Wizard" for whom? If so, how?

  AVI,
  I think it's a little late for the transfer Assistant.  You should use it while the other drive has been started.  But you can try the wizard.
  Run it and tell him that you are on the new PC.
  So say no to create a wizard disk.
  Then on the location of the files screen, select other and see if it will let you access the info on your another drive.
  In my view, it will look for the file in the wizard, but it is worth it.

  If this does not work then you need to just reinstall your programs and manually copy the data to your new drive. Typing of my new Windows 7 64 bit and love it! Soli Deo Gloria!

• The starting of Tecra M4 from an original CD of Windows XP SP2...

  I have a Windows XP SP2 full product original CD I want to use to reinstall my Tecra M4. When I boot with the CD it displays the original message "Setup inspects the configuration of your" then the screen becomes black and does nothing else. instead of the standard blue screen with the loading of drivers.

  Has anyone seen this problem? Any help would be really appreciated.

  Thank you.

  PS: The CD is fine. I tried in another laptop from another provider and it starts and installs ok.

  Hello Nonak

  I've never seen this kind of question, but I heard that standard SP2 cannot be installed on the tablet-PC because of some special characteristics. I'm sure that the installation process may not recognize the tablet pc screen.

  In my opinion, you should use recovery DVD for installation of the laptop. It is in fact the professional version of Windows XP Home edition and all utility and specific tools will be installed correctly.

  Good bye

• I lost my backup for windows xp home disks and now my computer asks me for the startup disk. Is there anywhere I can download the file on a dvd?

  Windows xp starts

  I lost my backup for windows xp home disks and now my computer asks me for the startup disk.  Is there anywhere I can download the file on a dvd?

  Hi DrKathy1950,

  ·         Did you do changes on the computer before the show?

  ·         When she asks the startup disk?

  ·         You get the error message?

  ·         Are you able to boot to the desktop?

  Answer with the information required to help more.

  For reference:

  How to replace Microsoft software or hardware, order service packs and replace product manuals

• my window vista sp2 stop sending messages for the server http for e-mail hotmail from July 2010. What other opion should I now? I use window 8. my mother was the first owner of this laptop.

  My lap top is a window vista premium 6.0 sp2. so, as I believe that in July 2010 my connection email expired with the sp2 from window to the server with http hotmail .com I was trying out an important e-mail to a certain Department of the army and he was ejected back because of my direct window a stopover for hotmail http sites. So, what's my next step? This laptop that I use now for academic use belonging to my mother. I was'nt sure of what to click on in the troubleshooting list. Thks.

  Are what the hell you referring in Windows 8?

  Submit all Hotmail queries on the forum right here:

  Windows Live Solution Center
  http://windowslivehelp.com/

• My external HARD disk enclosure has disappeared from Windows Explorer

  I installed a new 1 TB Seagate HD in my computer comes with a new of Windows 7 Home Premium 32 - bit SP1 copy.  I put the old 500 GB Seagate drive in an enclosure so I can use it to backup my files on the computer.  I named the pregnant disk K and finally got it work.  I did a back up on top of the first and last the drive disappeared from Windows Explorer.

  I opened the disk management and got this:

  

  Disc 1 is the external enclosure.  I can say this because it's the only thing connected to the computer of this size.  I clicked on OK to initialize it and got this:

  

  The case has its own power supply and is attached via a USB 3.0 cable, although all of my USB 2.0 ports.   I changed the drive to another port and received a message that I had to format it.  So I clicked OK for this, and that's what I then:

  

  Now I am more than willing to admit that I'm the worst person in computer science, you will find.  I don't know in Hades, how whether a player who worked Monday suddenly became a reader read only or how to change it if it has.  Is there someone who can help me with this?  In easy plain English?

  I would really appreciate it.

  Thanks for the update. Since the final stages of troubleshooting we provided that you did not work, we suggest you contact the manufacturer of your HARD drive. The error message you get already indicates a failure of the hard drive.