Non-standard configuration VPN
Hello everyone,
I have to install a nonstandard configuration with Cisco ASA 5510:
First of all, I have to do a VPN Lan-to-Lan and no problem on that:
Inside of LAN--> CIsco ASA - router isps1--> VPN L2L (10.10.10.x)
But at the same time the customer desires also that all Internet traffic is at another ISP router, and this 2nd router is inside LAN:
Inside of LAN--> Cisco ASA--> router ISP2 (192.168.0.253)--> Internet traffic.
How can I configure this config?
I tried with the following static routes:
Route inside 0.0.0.0 0.0.0.0 192.168.0.253
Route outside 10.10.10.0 255.255.255.0 217.269.x.y
but it's done does not, due to a malfunction NAT.
Any other ideas?
Thanks in advance
For me, it's easier to change the default gateway of the COMPUTERS TO the jump inside your local network. (The ISP router, or everything you have inside). In this device (router ISP or whatever you have) set the default gateway to the internet. And say on this device than anything, go to the Remote LAN (the counterpart of the VPN) should be sent to the ASA so the ASA will be able to provide the communication with the Remote LAN via VPN the
Tags: Cisco Security
Similar Questions
-
LT2P configuration vpn cisco asa with the internet machine windows/mac issue
Dear all,
I have properly configured configuration vpn L2TP on asa 5510 with 8.0 (4) version of IOS.
My internet does not work when I connect using the vpn. Even if I give power of attorney or dns or I remove the proxy
It does not work. only the resources behind the firewall, I can access. I use the extended access list
I tried also with the standard access list.
Please please suggest what error might be.
Thank you
JV
Split for L2TP over IPSec tunnel tunnel is not configured on the head end (ASA), it must be configured on the client itself, in accordance with the following Microsoft article:
-
Set up the first draft resolution non-standard
I am new to editing in Adobe Premiere and am running CS5 and I'm trying to create a Flash banner which has a short segment of video content.
The video is a montage of both HD and SD content that was provided by a third party.
The resolution of the target for the final video is 620 x 170.
How is first configures to allow me to create my video to this non-standard resolution?
Any help appreciated.
New sequence, general, desktop and set your properties until you prefer.
-
Alerts emails to a non-standard SMTP port
Is it possible to configure LiveCycle ES 8.2 to send e-mails to alert to a SMTP server on a non-standard port? In the /AdminUI there is a field for the server, but not for the port.
Thank you
Hi Jon
The ability to configure a nonstandard port in the /AdminUI has been added in the ES2.
There is a work around that you can use the 8.2.1.
Depending on the process under the management of the process, open the process called Notification by Email.
You will see 3 services:
1. don't send no attachments
2 send mail
3. send with map of attachments
On the properties of each service on the connection settings tab, locate the SMTP Port number.
You will notice that it is hardcoded at 25.
Change it to some port that you need for your SMTP server.
Your task Notifications will now be transmitted using this port.
Diana
-
iCloud Drive on my mac stops the synchronization of non-standard files
In my iCloud account, I created two folders (individuals and businesses) in addition to standard folders. Standards are iMovie, Keynote, Numbers, etc. On my MacBook Pro (OSX Yosemite V10.10.5), these non-standard files synchronizes any more.
A solution is to disable iCloud drive, and then restart, but the problem is recurring. In addition, it is a lot of your time, because whenever I turn it on, it deletes all of my computer and you should download again on restart.
Is there a solution to this? Non standard folders are not supported?
BTW: The iCloud drive on my Windows PC works perfectly... Hmmm
Have you tried the signature to iCloud and then reconnect?
-
evil due to the non-standard layout keyboard shortcuts.
I use a not standard, configuration of keyboard not QWERTY, from Dvorak to the developer by Roland Kauffman (for that "ddvorak").
Shortcuts keyboard seem to be messed up, and I can't understand how to make them grow.
On a standard web page, hit CTRL + C opens the bookmark library. Pressing CTRL + I (I is the button that gets the character 'c' under ddvorak) opens a side sidebar "search in a bookmark". Curiously, I can copy / paste without problem from the input field like the one I'm using to write this.I noticed that the menus contestual have not even keyboard shortcuts (but shortcuts are present in the "Edit" menu).
Pointers?
Hello
This is a known bug in Firefox. Please see the bug here report to see the conversation / the work done so far:
https://Bugzilla.Mozilla.org/show_bug.cgi?id=434737
You can also use the voting feature to express your support / interest to get this resolved. See here for more information on the right to vote:
https://Bugzilla.Mozilla.org/page.cgi?id=voting.html
In the bug, a user called Zac mentions that he was able to work around the problem by using the keyboard layout manager. However, it was in 2010. See the post for more details.
I hope this helps.
-
Hello
Is it possible to have a non-standard window? to be able to shape the top level for a custom shape window.
The example uses the Windows SDK functions - if you do not have this example then I guess that you do not have the SDK of the CVI version. In this case, the files attached may not be of great use to you.
JR
-
Tips for the TCP wait of asynchronous Messages with non-standard expression tanks
Hi all
I have a PITA instrument that I need to communicate with in a system of greater control. This instrument communicates via RS232 to a server running on the PC OEM application. In order to communicate with the instrument, I have to use the TCP protocol on a specific port on Localhost - So far so good as long the protcol is answer command.
The problem is that the instrument sends several messages asynchronously of different sizes with a double newline as a tank of termination (there are many CR/LFS all these messages so that they cannot be a MOE) and I am struggling to find a way to manage receive asynchronous messages of variable length with a cusom CHARACTER term. without having simply a fast dedicated for TCP loop reads trying to catch these asynchronous status messages.
I wish the functions VISA TCP has worked with the local host, given that the properties that can be set to change the chariot of non-standard term.
Open to suggestions-
Thank you
Ronin
Yes, I'll be streaming in my own string buffer and then to choose the messages out of the buffer when you find the stop character.
A technique to improve performance, rather than reading a single byte at a time is to use the "immediate" on reading TCP mode and use a high value for the "bytes read" - in this way, it will return all of the data that is there without waiting for all the specified bytes or the time-out. He will wait only the full timeout if 0 bytes are received (which you can ignore) - set to a low value such as 100ms.
-
BUG? Digital command resets all other entries with non-standard display format
I found what I think it's a bug with a digital command on a non-standard display format. I have the display format '% dW' value (an integer followed by the letter W). When I enter a number, it works, but if I then pull together the same number, the digital command resets to 0. This continues to alternate as long as I have to enter the same value - a single entry will be right, the other resets to 0. LabVIEW 2009 SP1. The VI didn't even need to run to see this behavior. If I use a value change event I also see this - the 'New' value will be alternately 0 even if not what I entered.
I had someone contact me about this today. Just as a follow-up, this CAR has been set in 2011.
-
I am interested in establishing a VPN for my computer. I looked at some of the information to help Ms. I'm missing something in the way of understanding how do or end the connection.
You can configure VPN regardless of static or dynamic IP, both are possible. You can refer to:
-
M177FW MFP non-standard paper sizes
Hi all
I use libreoffice on windows and linux (Mint ubuntu and debian testing) and sometimes I have to print on formats very non standard: 102 * 333 mm
It's a huge pain decent print on such a document: y at - it an easy solution, especially for linux?
yesterday, I noticed that, after some 50 prints on such a format, printer stop before each draw for cool, even if it didn't work or was turned off for minutes: is this normal?
Thank you
Hi Carlo85,
Your welcome. I meant Linux support forums. They would have more information on this operating system.
This is a support page for Linux that you can take a look at.
Frequently asked questions about Linux (FAQ).
Thank you.
-
PIM and "non-standard properties." RIM; JDE 4.3.0
Hello community!
I'm introducing some non-standard properties in the VCALENDAR from my Blackberry. Even if I think I have to comply with the RFC 2445, sect 4.8.8.1, my application will not work. I guess the menthod 'commit()' kill everything I put in. Is there another way to bypass the call 'commit() '?
Code:
-----------------------------------------------------------------------------------------------------------
import java. IO;
Import Java.util;Javax.microedition.pim import. *;
Net.rim.device.api.ui import. *;
Net.rim.device.api.ui.component import. *;.
.
.Get the PIM Instance
PIM pim = PIM.getInstance ();Download EventList in RW mode
EventList el = (EventList) pim.openPIMList (PIM. EVENT_LIST, PIM. READ_WRITE);Get elements of EventList
Enumeration e = el.items ();simplified recovery of the first event.
Any of the proofs advanced, I know that there is one in there
Event c = (Event) e.nextElement ();Get the serialized event
ByteArrayOutputStream output = new ByteArrayOutputStream();
String [] dataFormats = pim.supportedSerialFormats (PIM. EVENT_LIST);
pim.toSerialFormat (c, output, "UTF8", dataFormats [0]);serialized event to Convert to a string
String serialEvent = output.toString ();view the content on-screen
Add (new SeparatorField());
Rtf RichTextField = new RichTextField();
rtf.setText (serialEvent);
Add (new SeparatorField());//
In order to see if the changes I make are actually applid
at the event in the PIM, I change the "DESCRIPTION:" field. He
contains the text "this is a Note."
//TEMP and target String
String _tmp;
_New string;changing the text in ' DESCRIPTION:'. I put a '-' in front of it
_Pos int = serialEvent.indexOf ("he is a");
_TMP = serialEvent.substring (0, _pos) + "-" + serialEvent.substring (_pos, serialEvent.length ());end of search for VCALENDAR statement...
_Pos = _tmp.indexOf("END:VCALENDAR");... and insert the X property according to the RFC 2445 4.8.8.1 sect.
_new = _tmp.substring (0, _pos) + 'X-XXX-XXX; XXXTYPE-XXX-X = XXX:MyType "+"\r\n"+ _tmp.substring (_pos, _tmp.length ());Change is made. Check the on-screen
RichTextField rtf_4 = new RichTextField();
rtf_4.SetText (_new);
Add (rtf_4);
Add (new SeparatorField());//
Change seems good. Now, put it to the PIM
//kill the original event
el.removeEvent (c);prepare the flow
Bais ByteArrayInputStream = new ByteArrayInputStream (_new.getBytes ());Create PIM Item _new String (as amended)
PI [] PIMItem = pim.fromSerialFormat (chestnut, "UTF8");create a new element of PIM event
Event newEv = el.importEvent ((Event) IP [0]);and now commit event to PIM
newEv.commit ();Close EventList
El.Close ();
-----------------------------------------------------------------------------------------------------------As indicated in the comments of the modified code serialized event seems ok. The transition to the event in the DESCRIPTION: field was resumed and is visible in the normal case in the calendar on the phone app. If the data changes and the commit() stuff works. But the X property is filtered and not applied. What I see when I run my application a second time and check the VCALENDAR entry serialized on the screen.
I'm not sure the correct location of the X property. I tried it immediately before the ' END: VEVENT ", as well as before" END: VCALENDAR ". None of them works.
Someone who knows how to successfully add X-properties?
BlackBerry JDE 4.3.0
Thanks for your time!
Kind regards
Carsten
The set of BlackBerry API does not support the addition of custom in the PIMItems fields.
-
DMS 5.4 Lab (demo) non Standard installation
OBJECTIVE:
Install 5.4 on the available laboratory equipment.
CURRENT SITUATION:
I have the software for v.5.4 (iso images, with demo licenses, here are the exact versions).
- DMM - 5.3.0.244.iso
- DMS-UPG-later - 5.4.0.736.iso
IDEAL & UNLIKELY SOLUTION:
Install ESXi and then create a virtual computer, and then install on the virtual machine, or use something like that.
POTENTIAL COMPROMISE:
I was advised to try to "Trick" the installation program and install directly on bare metal.
QUESTIONS RELATING TO THE:
- Can anyone here advise me on what to try everything first, the best options and last ditch effort?
- I could potentially get this install on naked, non-standard extra material metal (I've got 2 boxes sitting around, the two are FIRST-NCS-APL-K9)
- Additional advice or reference URL/Docs, you can offer?
REFERRING URL:
- DMS Guides install (including 5.4):
- VID PID PRIME-NCS-APL-K9 V01
Hardware REQUIRED for DMM 5.4 VM:
Hi Paul,.
You can not achieve what you're trying to do with standard DMS software. Which can be installed on hardware support.
You must purchase the software Virtual DMM EGGS if you want to deploy a DMM as a virtual machine on custom hardware.
Kind regards
Marco
-
Need help to configure VPN NAT traffic to ip address external pool ASA
Hello
I need to configure vpn NAT ip address traffic external pool ASA
For example.
Apart from the ip address is 1.1.1.10
VPN traffic must be nat to 1.1.1.11
If I try to configure policy nat or static nat ASA gives me error "global address of overlap with mask.
Please, help me to solve this problem.
Thank you best regards &,.
Ramanantsoa
Thank you, and since you are just 1 IP 1.1.1.11 Polo, the traffic can only be initiated from your site to the remote end.
Here is the configuration of NAT:
access list nat - vpn ip 192.168.1.0 allow 255.255.255.0 10.0.0.0 255.255.0.0
NAT (inside) 5 access list nat - vpn
Overall 5 1.1.1.11 (outside)
In addition, the ACL crypto for the tunnel from site to site should be as follows:
access-list allow 1.1.1.11 ip host 10.0.0.0 255.255.0.0
Hope that helps.
-
Please give index on configuring vpn site to site on 881 to ASA 5505 cisco router
Earlier my boss asked me to prepare to implement the VPN site-to site on router Cisco 881 Integrated Services to ASA 5505 router, which is now running on the side of HQ. Someone please give me a hint. I am now learning the pdf file from Cisco that mention how to configure VPN site to site between 1812 Cisco IOS router and router of the ASA 5505 using ASDM V6.1 and SDM V2.5. Cannot find the book for the Cisco 881 device.
Someone please please suggest me something as soon as POSSIBLE.
Thank you
CLI version:
ASDM and SDM Version:
Maybe you are looking for
-
Can not play the movie bluray with Corel WinDVD on my Satellite A665-11Z
Hello When I play a movie with Corel WinDVD bluray, it plays over/under 10 seconds. "Then I get the message" your display environment does not support protected content.I played a Blu - Ray player on my laptop before and it worked perfectly. Is there
-
Display problem on Satellite U400
I have a problem with my laptop screen, the display on the screen begins vibrates up and down, any1 can tell me the reason behind it? Thank you
-
Cannot double invoice numbers and change new copy
Used to be in the good old days of the Apple I was doing for an invoice has been duplicated and edit are a new. This seems to have disappeared. What a joke. Apple should take a job easier, not more difficult.
-
I did not use my iPad in the last two months air. It has been turned off. Yesterday, when I tried to use it, it was not open and showing an empty battery. But it's not have charged. When I try to load my air of iPad, it shows the sign given in the fo
-
Video clips/photos download on 'My Documents'
I could not download pictures from a memory card, the camera directly, either by a card reader. I don't know if the problem is with the computer itself or Windows XP