None put into Hibernate or standby in Windows Vista on Portege M200

Similar Questions

• laptop is not put into hibernation after "standby mode"

  Reference Dell dear community,

  I have an Insipron 17R core i5 zm2410, NVIDIA Geforce 525 m, win8 64bits and I am facing a problem with hibernation mode / sleep.

  About 2 weeks ago my laptop went mode hibernation after beeing in mode 'sleep' for 2 hours on battery (for total draining of the battery to advoid).

  Now, it is not do it anymore but remains on "sleep" during all the time and drains the battery.

  I usually remove the power cable from the laptop during the night because of the noise of the adapter and the laptop always put into hibernation after beeing in mode 'sleep'. I went over the configuration in options plans and power supply and even reset and configured them again, without success.

  The only changes made to the system are important updates of windows

  I'm grateful for any suggestions or solutions.

  Have you checked to see if Hibernation is still active? Open an administrator mode command prompt and type: powercfg/h on.

• Unexpected shutdown after hibernate or standby on Windows 7

  For a few months now whenever I boot Windows 7 (64 bit Ultimate) after hibernation my laptop (Lenovo Thinkpad T500) it's a normal startup and then he pointed out that there was an unexpected stop.  I think that happens with sleep so well I rarely do it. Of course, my computer battery is close to death (only keeps for about 50% of initial charge), but I don't see why that should be a problem when I Hibernate when plugged into the wall.  Other than these issues, the computer is healthy and up-to-date with all its drivers so I have no idea what could be the culprit. Any suggestions or advice would be greatly appreciated!

  Hello

  I had this problem once I was able to solve with Darrell Gorter from Microsoft.

  1. run CMD. EXE as administrator
  2. run the following command: bcdedit - enum all
  Search for "Summary of Hibernate" in the output of the command above (example below):
  Out of the hibernation
  ---------------------
  identifier {3d8d3081-33ac-11dc-9a41-806e6f6e6963}
  Device partition = C:
  path \Windows\system32\winresume.exe
  Description

  inherit {resumeloadersettings}
  FILEDEVICE partition = C:
  FilePath \hiberfil.sys
  PAE Yes
  debugoptionenabled No.

  3. Once you have found, copy the value of the identifier (in this example - {3d8d3081-33ac-11dc-9a41-806e6f6e6963})
  4. run the following command: bcdedit /deletevalue {3d8d3081-33ac-11dc-9a41-806e6f6e6963} inherit
  5. test hibernation

  Carlos

• None of my work.imtrying of tools windows vista to restore my comp.to than its original state, but I can't find to open all the tools like system restore, disk cleanup, difragment, etc...

  When I turn my comp.on it gives me all sorts of messages cannot find shortcut to file.it is unable to deal with a problem.

  When I turn my comp.on it gives me all sorts of messages cannot find shortcut to file.it is unable to deal with a problem.

  Hé el24

  you do not etc system restore disk cleanup to put your computer to the standards of the factory how you bought it if that's what you hear

  Contact your computer manufacturer and ask them to send you a set of vista recovery discs and also ask them if you have a vista recovery partition on your hard drive to reinstall vista back to factory standards

  you will normally need to press F10 or F11 at startup to start the recovery process vista back to factory standards

  Ask them the sequence of keys to use to start the process from the recovery partition

  If in your question that you mean how do you do maintenance work on your existing operating system, please let us know

  Walter, the time zone traveller

• Windows 7 RC - Portege M200 - Base system device

  Windows 7 RC works well on my M200, but Device Manager is showing a "other device" without driver loaded. He is described as "Base system device" and properties indicates its location as "PCI Bus 2, device 13, function 0'.

  I tried online searches and navigation within my M200 for a driver without success. I read elsewhere in these forums that the 'Base system device' could be tied up with the SD utilities. I downloaded a new copy of the SD utilities and installed them, but still no luck. Certainly, the SD format utility does not work - it recognizes not only an SD card in inserted - so maybe the necessary revision of SD utilities for Windows 7.

  Not a major problem as I can format SD cards elsewhere, but it would be nice to receive a certificate of good health from Device Manager.

  Has anyone another execution in this problem and even better, found a solution?

  Keith Woolf

  You are right about revision. All the drivers, tools and utilities for Windows 7 must be designed and tested before they are offered for download. As you know Windows 7 is not yet on the market and the public support can not be started. With first notebook comes with Windows 7 Toshiba Toshiba will be support for the new site and some old models of laptops.

  Sorry but there is nothing you can do about it.

• Windows Vista key for different edition is installed, how to fix?

  I have an Acer PC with his side a certificate for Windows Vista Business. However, Windows Vista Home Premium has been installed on it. It is now demanding activation, indicating that previously the typical product key is not valid and not accepting is not the Vista Business product key.

  Is it possible (non-fissuration) I can change the installed Windows Vista Business edition so it will accept the key, without having to do a reinstall complete? Keeping in mind I can't even log.

  Otherwise, a CD to install Windows Vista normal company accepts OEM Acer product key or I will have to try to find the disc from Acer?

  Colin - I think the connection problem because the system is RTM, rather than SP2 - the RTM will feature Mode of Redcued heavily neutered if not authentic, that allows only access via a browser.

  It should be possible to rearm the machine to make it functional again for purposes of data recovery...

  The openg screen, it will offer to open a browser - if your default browser is IE do the following (it won't work in Chrome or Firefox - later)

  Open a window of IE and in the address bar, type C:\Windows\System32 and press the Enter key - IE should open the folder.

  Look down the list of files until you find CMD.exe (or just CMD)

  Right-click on the file and select run as administrator

  In the command prompt window, type the following command

  CSCRIPT SLMGR. VBS /REARM

  and press the Enter key - after a few seconds, you should get a 'success' message, as well as a request to restart - are, and you should have another 30 days to resolve your problem.

  If your default browser is not IE, then start using safe and open IE, in Internet Options, change the default for IE browser, then restart in normal mode and proceed as above.

• Unable to load microsoft highway with windows vista premium - sound happens with your registry settings were not copied correctly

  I recently bought Microsoft Highway to put on a laptop that operartes Windows Vista premium. After loading when you try to use the software, it comes up with "your registry settings for this application were not copied correctly-..." Please reinstall

  Any guidance would be appreciated

  Thank you

  You are welcome.

  A word of warning:
  I guess you knoe the potential dangers of do NOT turn UAC.
  Suggest you turn back on UAC when you do not run the highway.
  There is an opposite camp insisting UAC is 'nuisance, at best', but it's something else, unrelated to your problem.

• Windows XP Professional, Media Center Edition 2005 SP3 will not automatically put into hibernation

  I have re-installed drivers quick resume technology drivers & Intel Graphics & Sound & all associated drivers. but not good.

  Computer will be manually Hibernate & come out of hibernation, but is not automatically updated in hibernation?

  I tried the recommendations of microsoft all the but not good?

  The Device Manager shows all devices OK?

  Performed a restore the registry of oem disc & now put into hibernation very well at the moment, I hope that it will last? only lasted for a few days? its now to return again. ?

  not a fan of the system restores, especially under xp, but if it did work at one point, what has changed on your system, since it worked?

  http://support.Microsoft.com/kb/306084

  This is for two versions below, then you should be good.  But again this could be a temporary solution to a problem.

  Microsoft Windows XP Professional

  Microsoft Windows XP Home Edition

• Windows Vista will not accept my passowrd even if I put the password in. What should I do? I can't get into what it is.

  Windows Vista will not accept my passowrd even if I put the password in. What should I do? I can't get into what it is.

  Hello

  This article describes how to use the system restore feature to log on Windows 7 or Windows Vista when you lose access to an account.

  http://support.Microsoft.com/kb/940765

  If the above does not work

  I'm sorry, but we cannot help with forgotten passwords

  It is a policy of microsoft in these forums

  you need to reinstall vista

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

• Windows Vista won't Hibernate.

  Hi all

  I'm on Windows Vista Home Premium and I have a problem with getting to stay in sleep mode extended computer.

  I used to have Windows XP, and it was really easy. I had set it up as follows: display off after 15 minutes, standby mode after 30 minutes and hibernate after 45 minutes. I could manually put it in hibernation in the start menu.

  I tried to get the same set up on Windows Vista, but I found it returns from hibernation in itself. If I select "Hibernate" in the start menu and then it will go into hibernation, but when I get back to the machine it will be still operational with the login screen again.

  Can someone tell me what I am doing wrong?

  Hello

  See if this helps you to find the cause of your problem.

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  Set the default power options.

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  See you soon.

• My Satellite A100 would not be put into hibernation

  Hello

  My laptop would not be in hibernation when I activate in the windows toolbar.
  When I activate the hibernation it will normally, but when the monitor takes blue and says "prepare put into hibernation" the monitor or system do not shoutdown (turn off), why?

  Is that the same for the suspend mode.

  I did a survey on my laptop and see I mode hibernation is enabled in control panel > power Setings > Hibernation

  My laptop is a Satellite A100.

  Sorry for my English.

  Thanks a lott!

  Hey Buddy,

  Sometimes, these problems of hibernation / suspension are caused by some programs that can't be closed from vista. Or your toshiba powersaver works bad, maybe some settings have been
  badly configured through that-I-know-what program or something else.

  I suggest you first: when you try to hibernate/suspend, then try pressing CTRL-ALT-DEL to see what applications are STILL running. Try closing the applications in the order of
  see when the machine will be really placed in hibernation. If this doesn´t has helped you, then try reinstalling the powersave (first uninstall correctly your system) and give a few
  What feedback happening.

  Greetz

• Hibernate or standby mode impossible!

  I use a laptop VAIO SR390PGB running Windows Vista Business. When I put in hibernation, the screen becomes black and continues to blink the led on the HARD drive for a minute but then nothing happens and the system stops working while I have to turn off manually by holding down the power button. I would be happy if you can help me with this.

  Hello

  A Fixit for Hibernate

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658

  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• computer won't stay asleep or put into hibernation

  I have recently reinstalled Windows 7 on a desktop computer.  I used to leave it on all the time but now I want it to go to sleep or put into hibernation after a few minutes (and stay that way until we want to use it).  I tried to sleep, hibernate and hybrid sleep.  It will turn off, but in a few minutes he returned upward by itself.  Sometimes it seems to scroll, and down every few minutes.

  I read that USB devices can cause this, but only the mouse and keyboard are attached via the USB port.  There are two internal hard drives.

  A thought-

  Check the network and sharing Center

  Some settings of the map change

  A click with the right button on your network adapter

  Select Properties

  Select Configure, then power management

  and make sure that allow this device to wake the computer is not checked?

• Satellite A200 - no audio device after the awakening of the mode 'sleep' or 'putting into hibernation'

  I own a Satellite A200 laptop computer with Windows Vista.

  Sometimes when I put my laptop in 'stand by' mode or 'Hibernate', he wakes up with no audio device. (Error - no installed audio device). The problem is solved by restarting my computer, or by placing it in the back to 'stand by' and turning it back on.

  I reinstalled my OS using the recovery cd - and the exsists yet problem.
  (Version 1.30, Audio bios driver ver. 6.0.1.5374)

  Is this a known problem or is it just my computer? I'm afraid that it is a hardware problem. (The laptop is less then 1 month).

  Thanks (and sorry for my "rusty" English :-()

  Tomer

  Hi guys

  Can you please check this Microsoft article? Maybe this will help.

  http://support.Microsoft.com/kb/929685/en-us

  By the way: is your A200 with or without built-in webcam?

• When I turn on the computer of mymy and it gives me request error indicating that "the required data was not put into memory due to an error of e state / of"0xc000009c".»

  Original title: IO error

  OK so I turn on my computer and it gives me request error indicating that "the required data was not put into memory due to an error of e state / of"0xc000009c".»

  I run an xp windows 2003-04. My computer does not start completely and if I click on debug or put end to the program there just restarts the computer. How can I solve this problem? and is it possible that I can update my software?

  You say that you can not even start in Safe Mode, so method 1 will not help you, method 2 will not help you and 3 method will not help you.

  I start in the XP Recovery Console and first run a chkdsk/r on the afflicted system, but since we don't know anything about your system, we will need more information.

  It is a shame that in the forums MS Answers, the first response to a new question is (or should be) a request for more information...  You are 5 days in your problem, and so for him it seems that you are not getting anywhere.  If the thread goes inactive for more than a few days, the response of the Microsoft Support Engineer will become the 'response' automatically because it has links to the KB articles.

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?