Nonvolatile memory in SMU-8135RT

Similar Questions

• Printers with nonvolatile memory

  I work in a hospital where we have several models of HP printers.  For the purposes of compliance with the confidentiality of private medical information, I need to know if one of the following HP printers have a non-volatile memory:

  LaserJet 3015 Laserjet 3380, Officejet Pro K5400, Laserjet 2430tn and Business Inkjet 1200.  Where can I find this info?

  Hey,.

  You should be well on these models, as none of them mentioned in the specifications of the product they had a bench of memory HARD drive style.

  Good luck.

• How can I turn a channel in the SMU-6556 hsdio for material comparison mode?

  Hello

  I am developing a system with Labview2013, TestStand2013, and SMU-6556

  The system diagram is:

  SMU-6556 > - 12 channels - 3---> Dut1

  Hardware compare mode:---3 channels---> Dut2

  | - 3 channels---> Dut3

  | - 3 channels---> Dut4

  In TestStand, I have the following configuration:

  1. in the "Setup" section I'm loading ~ 10 digital waveforms with 12 channels each in memory of SMU-6556.

  2. in the section 'Hand', that I'm running in hardware compare mode each digital waveforms. (DWF1, DWF2,..., DWF10)

  The system works well for test of 4 had.

  Without loading a new wave form how can I enable/disable underwent?

  For example, how can I configure to test only the dut1 and dut3?

  HELO engfpe,

  You can see the advanced, advanced attribute: hardware compare: bit Error Cumulative property and see if that will get your request.

  Cumulative error Bits will tell you what mistakes HWC product channels even if the FIFO is full. In this way, you can at least know where to pass the ASE. If it fails and you would like more information, then you should always charge the waveform in order to get a manageable number of HWC error, but hope that helps at least. This feature was added in NOR-HSDIO 2.0, so make sure you have the latest driver.

• Cannot reset the BIOS password

  I have reset the bios by disconnecting the battery, but the password remains still.
  When I enter the password wrong 4 times the system BIOS is locked, but I'm not giving any number or key.
  I have a laptop Elitebook 820. Please help someone!

  Hello

  Unfortunately, business machines such as Probooks or EliteBook have more strict security consumption patterns - they do not produce "stop codes", the password cannot be derived from the serial number and the code is stored in a nonvolatile memory to remove the RTC cell does not reset the password in this case.

  If you Contact HP Business support they should be able to send you a file custom SMC.bin that you can use to reset the password at startup.

  Kind regards

  DP - K

• ProBook 4520 s: BIOS LOCKED 4520 s

  Hi, I have a Probook 4520 s and I want to get into the bios, but it says administrator was locked with a password, I see in the forum, I know that you can provide me the Adminisitrator password unlock code for my laptop, I'll give you all the data you need , Thanks for your time and your patience, cordially Juan Pablo

  ProBook 4520 s

  SERIES: (deleted content)

  Product: XR178LT #AC8

  Hello

  Unfortunately, business machines such as Probooks or EliteBook have more strict security consumption patterns - they do not produce "stop codes", the password cannot be derived from the serial number and the code is stored in a nonvolatile memory to remove the RTC cell does not reset the password in this case.

  If you Contact HP Business support they should be able to send you a file custom SMC.bin that you can use to reset the password at startup.

  Kind regards

  DP - K

• EliteBook 8540w: I forgot the bios password

  Hello

  2 years in order to enable virtualization, a bios password was to be given. Since then, I've used and never returned inside the bios again. Now, have a problem with the clock in windows 8.1 and linux when the laptop is not connected to the network. Could you please help me restet password please? CND02910YP

  Hello

  Unfortunately, business machines such as Probooks or EliteBook have more strict security consumption patterns - they do not produce "stop codes", the password cannot be derived from the serial number and the code is stored in a nonvolatile memory to remove the RTC cell does not reset the password in this case.

  If you Contact HP Business support they should be able to send you a file custom SMC.bin that you can use to reset the password at startup.

  Kind regards

  DP - K

• HP Elitebook 8470p: bios password forgotten

  Can I get the default bios password for.

  HP Elitebook 8470p

  Series: [personal information]

  Product: C3J53UP #ACB

  Hello

  Unfortunately, business machines such as Probooks or EliteBook have more strict security consumption patterns - they do not produce "stop codes", the password cannot be derived from the serial number and the code is stored in a nonvolatile memory to remove the RTC cell does not reset the password in this case.

  If you Contact HP Business support they should be able to send you a file custom SMC.bin that you can use to reset the password at startup.

  Kind regards

  DP - K

• HP probook 440 g2: rom bios reset password for hp probook 440 g2

  I am in urgent need to reset password for the bios rom for my g2 440 probook. It has been days and I'm still stuck on the same screen.

  Hello

  Unfortunately, business machines such as Probooks or EliteBook have more strict security consumption patterns - they do not produce "stop codes", the password cannot be derived from the serial number and the code is stored in a nonvolatile memory to remove the RTC cell does not reset the password in this case.

  If you Contact HP Business support they should be able to send you a file custom SMC.bin that you can use to reset the password at startup.

  Kind regards

  DP - K

• Computer laptop 6570b: administrator Bios password

  When I try to start the computer I get into the Bios and it says "Select user for login", there are two options, both of them have passwords that I don't know. After you type the wrong password 4 times it will say "Press F7 for HP SpareKey recovery". Then you will arrive at HP SpareKey recovery with two options named "enter BIOS Admin password and answer HP SpareKey Questions", but when you click on any one of them it will say "HP SpareKey recovery not enrolled select OK to restart the system" and then it will all the same once again.
  
  Help, please!

  Hello

  Unfortunately, business machines such as Probooks or EliteBook have more strict security consumption patterns - they do not produce "stop codes", the password cannot be derived from the serial number and the code is stored in a nonvolatile memory to remove the RTC cell does not reset the password in this case.

  If you Contact HP Business support they should be able to send you a file custom SMC.bin that you can use to reset the password at startup.

  Kind regards

  DP - K

• Constant panic kernel_task - Mac

  Hello, can someone help me identify the problem for re-occuring kernel_task panic? I several times a day for the most part, when the computer is closed and sleep. I sometimes other panics and restarts where the main reason stated in the report that is noticed or Photos.

  I got my computer twice to the approved service but they only run the hardware tests that showed negative issues.

  They did own OS X install twice and I did not recover the backup system, but transferred the data only as a copy. There are only original material installed and no software other than Apple one.

  I tried the memory resets, recovery mode (now D) and the other stuff found here.

  Thank you for your advice. MIC.

  Model name: MacBook Pro

  Model identifier: MacBookPro11, 3

  Processor name: Intel Core i7

  Processor speed: 2.5 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 6 MB

  Memory: 16 GB

  Boot ROM version: MBP112.0138.B16

  Version of the SCM (System): 2.19f12

  Serial number (System): C0 * 3QD

  Material UUID: 13986202-9B89-59C4-8E82-C1C9CC0BCFAC

  Anonymous UUID: CF36DB0E-CB81-C68D-4091-FAD0BA435013

  Sat Mar 12 18:58:54 2016

  Panic report *.

  panic (cpu 0 0xffffff800f5d255a appellant): Kernel trap at 0xffffff800f58c1f0, type 14 = page fault, registers:

  CR0: 0 X 0000000080010033, CR2: 0XFFFFFF7F800000B0 CR3: 0X0000000012BEE000 CR4: 0X00000000001627E0

  RAX: 0 X 0000000000000000, RBX: 0000000000400000 RCX 0 X: 0XFFFFFF8015B26000 RDX: 0X00000000002011AF

  RER: 0XFFFFFF81FACE3600, RBP: 0XFFFFFF81FACE3670, IHR: 0XFFFFFF80250D7AC0, RDI: 0XFFFFFF7F80000080

  R8: 0XFFFFFF8014926000, R9: 0XFFFFFF7F80000000, R10: 0 X 0000000000000000, R11: 0000000000000000 0 X

  R12: 0XFFFFFF91FC757000, R13: 0 X 0000000080000000, R14: 0 X 0000000000000000, R15: 0XFFFFFF8025655000

  RFL: 0 X 0000000000010082, RIP: 0XFFFFFF800F58C1F0, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010

  Lack of CR2: 0xffffff7f800000b0, error code: 0 x 0000000000000000, CPU error: 0x0, PL: 0

  Backtrace (CPU 0), frame: return address

  0xffffff81face3290: 0xffffff800f4df792

  0xffffff81face3310: 0xffffff800f5d255a

  0xffffff81face34f0: 0xffffff800f5f0233

  0xffffff81face3510: 0xffffff800f58c1f0

  0xffffff81face3670: 0xffffff800f58bcc2

  0xffffff81face3790: 0xffffff800fa7ca6a

  0xffffff81face3b90: 0xffffff800f5df7fd

  0xffffff81face3bd0: 0xffffff800f5be37a

  0xffffff81face3c60: 0xffffff800f5defe3

  0xffffff81face3cd0: 0xffffff7f9239552d

  0xffffff81face3d10: 0xffffff7f92398d79

  0xffffff81face3d30: 0xffffff800fad38ff

  0xffffff81face3d90: 0xffffff800fafe9e6

  0xffffff81face3e00: 0xffffff800faa48f9

  0xffffff81face3e60: 0xffffff800fa9c884

  0xffffff81face3ec0: 0xffffff800faa9b42

  0xffffff81face3f00: 0xffffff800faa9c92

  0xffffff81face3f40: 0xffffff800fab4d61

  0xffffff81face3f80: 0xffffff800fab4f5c

  0xffffff81face3fb0: 0xffffff800f5ccf77

  Extensions of core in backtrace:

  com.apple.driver.AppleACPIPlatform (4.0) [3BE4E926-E063-3BBD-BE05-F6F97358C7A4] @0 xffffff7f9238a000-> 0xffffff7f923e9fff

  dependency: com.apple.iokit.IOACPIFamily (1.4) [5D7574C3-8E90-3873-BAEB-D979FC215A7D] @0xfffff f7f9087e000

  dependency: com.apple.iokit.IOPCIFamily (2.9) [F398CE94-0FBD-3E8E-A7AB-55F7F05A81ED] @ 7f8fd2c000 0xffffff

  Corresponding to the current thread BSD process name: kernel_task

  Mac OS version:

  15 D 21

  Kernel version:

  15.3.0 Darwin kernel version: Thu Dec 10 18:40:58 PST 2015; root:XNU-3248.30.4~1/RELEASE_X86_64

  Kernel UUID: DECC9F02-27D7-31F0-9599-A9EF2873902C

  Slide kernel: 0x000000000f200000

  Text of core base: 0xffffff800f400000

  Text __HIB base: 0xffffff800f300000

  Name of system model: MacBookPro11, 3 (Mac-2BD1B31983FE1663)

  Availability of the system in nanoseconds: 18518227291499

  last load kext to 654073519027: com.apple.filesystems.afpfs 11.0 (addr 0xffffff7f9242b000 size 368640)

  Finally unloaded kext to 105584862647: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7f91a27000 size 40960)

  kexts responsible:

  com Apple.filesystems.afpfs 11.0

  com Apple.NKE.asp - tcp 8.0.0

  com.apple.driver.AppleBluetoothMultitouch 90.3

  com.apple.driver.AppleHWSensor 1.9.5d0

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.AGPM 110.20.22

  com.apple.driver.ApplePlatformEnabler 2.6.0d0

  com.apple.driver.X86PlatformShim 1.0.0

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleGraphicsDevicePolicy 3.7.7

  com.apple.driver.AppleHDA 272.51.3

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.iokit.IOBluetoothSerialManager 4.4.3f4

  com.apple.GeForce 10.0.8

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.driver.AppleIntelHD5000Graphics 10.1.2

  com.apple.driver.AppleHV 1

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.3f4

  com.apple.driver.AppleSMCLMU 208

  com.apple.driver.AppleLPC 3.1

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.driver.AppleCameraInterface 5.41.0

  com.apple.driver.AppleMuxControl 3.12.6

  com.apple.driver.AppleIntelFramebufferAzul 10.1.2

  com.apple.driver.AppleUSBCardReader 3.7.1

  com.apple.driver.AppleUSBTCButtons 245,4

  com.apple.driver.AppleUSBTCKeyboard 245,4

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.AirPort.Brcm4360 1020.17.1a1

  com.apple.driver.AppleSmartBatteryManager 161.0.0

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.security.SecureRemotePassword 1.0

  com.apple.driver.IOBluetoothHIDDriver 4.4.3f4

  com.apple.driver.AppleMultitouchDriver 304.10

  com.apple.driver.AppleHIDTransport 5

  com Apple.kext.Triggers 1.0

  com.apple.driver.DspFuncLib 272.51.3

  com.apple.kext.OSvKernDSPLib 525

  com.apple.iokit.IOSerialFamily 11

  com.apple.nvidia.driver.NVDAGK100Hal 10.0.8

  com.apple.nvidia.driver.NVDAResman 10.0.8

  com.apple.driver.CoreCaptureResponder 1

  com.apple.iokit.IOSurface 108.0.1

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.3f4

  com.apple.iokit.IOBluetoothFamily 4.4.3f4

  com.apple.driver.AppleHDAController 272.51.3

  com.apple.iokit.IOHDAFamily 272.51.3

  com.apple.iokit.IOAudioFamily 204.3

  com.apple.vecLib.kext 1.2.0

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.driver.AppleGraphicsControl 3.12.6

  com.apple.AppleGraphicsDeviceControl 3.12.6

  com.apple.iokit.IOAcceleratorFamily2 205,1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.driver.X86PlatformPlugin 1.0.0

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.iokit.IOUSBMassStorageDriver 1.0.0

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  com.apple.driver.usb.AppleUSBHub 1.0.1

  com.apple.driver.AppleUSBMultitouch 250,5

  com.apple.iokit.IOUSBHIDDriver 900.4.1

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.driver.CoreStorage 517.20.1

  com.apple.iokit.IOAHCIFamily 2.8.1

  com.apple.driver.AppleThunderboltDPInAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  com.apple.driver.AppleThunderboltNHI 4.0.4

  com.apple.iokit.IOThunderboltFamily 5.1.0

  com.apple.iokit.IO80211Family 1110.26

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IONetworkingFamily 3.2

  com Apple.Driver.corecapture 1.0.4

  com.apple.driver.usb.AppleUSBXHCIPCI 1.0.1

  com.apple.driver.usb.AppleUSBXHCI 1.0.1

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417.2

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  Model: MacBookPro11, 3, MBP112.0138.B16 of BootROM, 4 processors, Intel Core i7, 2.5 GHz, 16 GB, MSC 2.19f12

  Graphics card: Intel integrated Iris Pro, Intel Iris Pro,

  Graphics card: NVIDIA GeForce GT 750 M, NVIDIA GeForce GT 750 M, PCIe, 2048 MB

  Memory module: DIMM0/0 BANK, 8 GB, DDR3, 1600 MHz, 0x02FE,--

  Memory module: DIMM0/1 BANK, 8 GB, DDR3, 1600 MHz, 0x02FE,--

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 134), Broadcom BCM43xx 1.0 (7.21.94.136.1a1)

  Bluetooth: Version 4.4.3f4 16616, 3 services, 27 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en0

  Serial ATA Device: APPLE SM0512F, 500,28 GB SSD

  USB device: USB 3.0 Bus

  USB Device: Card reader

  USB device: Apple keyboard / Trackpad

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  Bus crush: MacBook Pro, Apple Inc., 17.1

  < personal information under the direction of the host >

  This panic was not caused by a third-party software. If the problem recurs, the possibilities are:

  1. A stale or corrupt kernel cache
  2. A damaged OS x installation
  3. A flaw in a device, if applicable
  4. Corrupt the nonvolatile memory (NVRAM)
  5. Internal hardware failure (including incompatible memory)
  6. Obscure bug in OS X

  You can already have excluded some of them. Some may not be applicable.

  Rule # 1 by starting in safe mode , then restart as usual. Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is set, or if the boot volume is a Fusion drive or a software RAID, you can not do this. Ask for additional instructions.

  You can exclude #2 and #3 in reinstalling the operating system and tests with non-essential devices disconnected and removed aftermarket expansion cards, if any. Sometimes a clean reinstall may solve a problem which is not resolved by reinstalling in place.

  Corrupt the PRAM, which causes panic from time to time, may be excluded in resetting it.

  If your model has replaceable memory by the user and you have upgraded modules of memory, reinstall the original memory and see if there is any improvement. Make sure not to touch the Gold contacts. Clean them with a mild solvent such as rubbing alcohol. Spare memory must exactly match the technical specifications of the machine.

  Apple diagnostics or the Apple Hardware Test, as generally unreliable, sometimes detects a fault. A negative test may not be depended on. Run the long version of the test, if necessary.

  More than a screen connected is another trigger for OS X bugs reported.

  In the category of obscure bugs, damage the data on a file server, such as a Time Capsule backup - can sometimes trigger a panic. If necessary, remove all the network devices and see if the panic stop. If you use Time Machine, disable it temporarily in its preference pane.

  Otherwise, an appointment of 'Genius' in an Apple Store, or switch to a different service provider authorized to have the tested machine. You may need to leave for several days. He is not much of interest to do this, unless you can reproduce the panic, or if you can't, it happens quite often that he is likely to be repeated at the store. Otherwise, you can be said that everything is fine.

  Print the first page of the report panic and take it with you.

• Mid 2011 Macbook Air 5.1 keeps restarting

  So, recently, 11 inch MBA MOM began to close and restart all of a sudden. Once it starts it get this error. Can someone help me out here?

  Anonymous UUID: 7A7F0870-6BA7-399F-6970-21E4A6BFF782

  Wed Mar 9 23:56:41 2016

  Panic report *.

  panic (the appellant 2 0xffffff802b7d255a cpu): Kernel trap at 0xffffff7fadcef96b, type 0 = error of fracture, records:

  CR0: 0X000000008001003B, CR2: 0XFFFFFF8078304D20 CR3: 0X000000002E9CE000 CR4: 0X00000000000626E0

  RAX: 0X0000000005CA6000, RBX: 0XFFFFFF803AC85400 RCX: 0 X 0000000000001000, RDX: 0 X 0000000000000000

  RER: 0XFFFFFF888FEBBC60, RBP: 0XFFFFFF888FEBBD60, IHR: 0 X 0000000000000000, RDI: 0XFFFFFF803AA43880

  R8: 0X000000000000FFFF, R9: 0 X 0000000000000001, R10: 0 X 0000000000000000, R11: 0000000000000000 0 X

  R12: 0XFFFFFF803AC85400, R13: 0XFFFFFF8078304000, R14: 0 X 0000000000000000, R15: 0XFFFFFF8063A6C000

  RFL: 0 X 0000000000010246, RIP: 0XFFFFFF7FADCEF96B, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010

  Lack of CR2: 0xffffff8078304d20, error code: 0 x 0000000000000000, CPU error: 0 x 2, PL: 0

  Backtrace (2 CPU), Frame: Return address

  0xffffff888febb8f0: 0xffffff802b6df792

  0xffffff888febb970: 0xffffff802b7d255a

  0xffffff888febbb50: 0xffffff802b7f0233

  0xffffff888febbb70: 0xffffff7fadcef96b

  0xffffff888febbd60: 0xffffff7fadd00e5f

  0xffffff888febbd90: 0xffffff7fadcd6049

  0xffffff888febbdd0: 0xffffff7fadcede01

  0xffffff888febbe00: 0xffffff7fadccfba8

  0xffffff888febbe40: 0xffffff7fac9910f5

  0xffffff888febbe90: 0xffffff7fac98e781

  0xffffff888febbef0: 0xffffff802bcb6ef6

  0xffffff888febbf40: 0xffffff802bcb4d61

  0xffffff888febbf80: 0xffffff802bcb4e56

  0xffffff888febbfb0: 0xffffff802b7ccf77

  Extensions of core in backtrace:

  (2.4.1) com.apple.iokit.IOGraphicsFamily [429C688E-8DDA-3D15-9C6E-6F3F4855C424] @0 xffffff7fac983000-> 0xffffff7fac9bdfff

  dependency: com.apple.iokit.IOPCIFamily (2.9) [F398CE94-0FBD-3E8E-A7AB-55F7F05A81ED] @ 7fabf2c000 0xffffff

  com.apple.driver.AppleIntelHD3000Graphics (10.0) [2462666A - 1 d 74-32F3-9714-E15F5F3 BE058]@0xffffff7fadccf000-> 0xffffff7fadd35fff]

  dependency: com.apple.iokit.IOPCIFamily (2.9) [F398CE94-0FBD-3E8E-A7AB-55F7F05A81ED] @ 7fabf2c000 0xffffff

  dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [429C688E-8DDA-3D15-9C6E-6F3F4855C424] @0 xffffff7fac983000

  Corresponding to the current thread BSD process name: kernel_task

  Mac OS version:

  15 D 21

  Kernel version:

  15.3.0 Darwin kernel version: Thu Dec 10 18:40:58 PST 2015; root:XNU-3248.30.4~1/RELEASE_X86_64

  Kernel UUID: DECC9F02-27D7-31F0-9599-A9EF2873902C

  Slide kernel: 0x000000002b400000

  Text of core base: 0xffffff802b600000

  Text __HIB base: 0xffffff802b500000

  Name of system model: MacBookAir4, 1 (Mac-C08A6BB70A942AC2)

  Availability of the system in nanoseconds: 1008380602748

  last load kext to 106887447606: com.apple.filesystems.smbfs 3.0.0 (addr 0xffffff7fae1e0000 size 409600)

  Finally unloaded kext to 290235157861: com.apple.driver.usb.AppleUSBUHCI 1.0.1 (addr 0xffffff7fac695000 size 126976)

  kexts responsible:

  com Apple.filesystems.smbfs 3.0.0

  com.apple.driver.AppleHWSensor 1.9.5d0

  com.apple.driver.AudioAUUC 1.70

  com Apple.filesystems.autofs 3.0

  com.apple.driver.ApplePlatformEnabler 2.6.0d0

  com.apple.driver.AGPM 110.20.22

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.driver.AppleHDA 272.51.3

  com.apple.driver.AppleMikeyDriver 272.51.3

  com.apple.iokit.IOBluetoothSerialManager 4.4.3f4

  com.apple.driver.AppleSMCPDRC 1.0.0

  com.apple.driver.AppleIntelHD3000Graphics 10.0.0

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHV 1

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.3f4

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.driver.AppleBacklight 170.8.8

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.driver.AppleLPC 3.1

  com.apple.driver.AppleSMCLMU 208

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleIntelSNBGraphicsFB 10.0.0

  com.apple.driver.AppleUSBTCButtons 245,4

  com.apple.driver.AppleUSBTCKeyboard 245,4

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.driver.AirPort.Brcm4331 800.20

  This panic was not caused by a third-party software. If the problem recurs, the possibilities are:

  1. A stale or corrupt kernel cache
  2. A damaged OS x installation
  3. A flaw in a device, if applicable
  4. Corrupt the nonvolatile memory (NVRAM)
  5. Internal hardware failure (including incompatible memory)
  6. Obscure bug in OS X

  You can already have excluded some of them.

  Rule # 1 by starting in safe mode , then restart as usual. Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is set, or if the boot volume is a Fusion drive or a software RAID, you can not do this. Ask for additional instructions.

  You can exclude #2 and #3 in reinstalling the operating system and tests with non-essential devices disconnected and removed aftermarket expansion cards, if any. Sometimes a clean reinstall may solve a problem which is not resolved by reinstalling in place.

  Corrupt the PRAM, which causes panic from time to time, may be excluded in resetting it.

  If your model has replaceable memory by the user and you have upgraded modules of memory, reinstall the original memory and see if there is any improvement. Make sure not to touch the Gold contacts. Clean them with a mild solvent such as rubbing alcohol. Spare memory must exactly match the technical specifications of the machine.

  Apple diagnostics or the Apple Hardware Test, as generally unreliable, sometimes detects a fault. A negative test may not be depended on. Run the long version of the test, if necessary.

  More than a screen connected is another trigger for OS X bugs reported.

  In the category of obscure bugs, damage the data on a file server, such as a Time Capsule backup - can sometimes trigger a panic. If necessary, remove all the network devices and see if the panic stop. If you use Time Machine, disable it temporarily in its preference pane.

  Otherwise, an appointment of 'Genius' in an Apple Store, or switch to a different service provider authorized to have the tested machine. You may need to leave for several days. He is not much of interest to do this, unless you can reproduce the panic, or if you can't, it happens quite often that he is likely to be repeated at the store. Otherwise, you can be said that everything is fine.

  Print the first page of the report panic and take it with you.

• HP 6530 b: administrator Bios password

  Hello..

  I can't access bios configuration of hp 6530 b notebook.i have no hp spare key and a TI administrator, I do not know the password of the bios. I want to format the laptop, but not to boot from the CD.

  Help, please!

  Thank you.

  Hello

  Unfortunately, business machines such as Probooks or EliteBook have more strict security consumption patterns - they do not produce "stop codes", the password cannot be derived from the serial number and the code is stored in a nonvolatile memory to remove the RTC cell does not reset the password in this case.

  If you Contact HP Business support they should be able to send you a file custom SMC.bin that you can use to reset the password at startup.

  Kind regards

  DP - K

• Compaq 6510 b: Compaq 6510 b works reset password

  Do blue screen at startup ask power on password. I don't know the code and after hitting entered 3 times that I get a *. How can I reset the password? Any help would be greatly appreciated.

  Hello

  Unfortunately, business machines such as Probooks or EliteBook have more strict security consumption patterns - they do not produce "stop codes", the password cannot be derived from the serial number and the code is stored in a nonvolatile memory to remove the RTC cell does not reset the password in this case.

  If you Contact HP Business support they should be able to send you a file custom SMC.bin that you can use to reset the password at startup.

  Kind regards

  DP - K

• Satellite L650 - Fan not kick (work) after the fashion 'sleep'

  Hi all

  The fan does not work when you restart the standby mode, but only after complete closure.
  What causes this and how can I solve this problem?
  Toshiba L650 - 170 system unit

  Thank you!
  Luke

  A number of questions:
  Have you noticed the fan operating with the preinstalled Toshiba system problem?
  Have you noticed this first day of purchase?

  The Satellite A660 is a little old and already abandoned the model and therefore, it would be interesting to know if something has changed in the past

  Anyway, there are different modes of sleep (sleep is divided into four States, S1 to S4)

  S1, to suspend him (POS): all processor caches are flushed, and the CPU stops the execution of the instructions. The power of the CPU and RAM is maintained. Devices that do not indicate that they must remain lit, can be turned off.

  S2: CPU power off. Dirty cache is emptied to the RAM.

  S3, commonly known as secondary, sleep or Suspend to RAM (STR): RAM remains powered.

  S4, hibernation or Suspend to Disk: all content of main memory is stored in a nonvolatile memory such as a hard drive and is turned off.

  Using the Powercfg command you will be able to check this "standby" and might it change too.
  Details here: http://en.wikipedia.org/wiki/Powercfg
  It would be interesting to know how "sleep" you use exactly and if the fan would be using a "sleep" mode

• HP Elitebook 8540w: bios administrator password

  I have a HP elitebook 8540w, iI forgot the BIOS administrator password, after three tries, I got the message: failure of authentication system locked, press the power button to restart the system. I need to install Windows 8 but not posible to boot from the CD-ROM.

  Hello

  Unfortunately, business machines such as Probooks or EliteBook have more strict security consumption patterns - they do not produce "stop codes", the password cannot be derived from the serial number and the code is stored in a nonvolatile memory to remove the RTC cell does not reset the password in this case.

  If you contact HP Business support, they may be able to file a custom SMC.bin that you can use to reset the password at startup.

  Kind regards

  DP - K