Norton Antivirus slows down startup time in Windows Vista

Similar Questions

• Windows defender and norton antivirus at the same time?

  can I run windows defender and norton antivirus at the same time?  I have Windows 7 and a lot of memory

  I have HP Pavilion PC p7-1254

  Yes.

• I2C communication slows down over time using USB-8451

  Hi all!

  I try to communicate via a device slave using a USB-8451 I2C and I noticed that after a while the communication speed slows way.

  I can send and receive data very well and apparently my system seems to work. But the problem is that over time the speed of data transfer slows down so much so that if I let it run all night it has slowed to a crawl in the morning. My ultimate goal is to gather data, draw and save every second and at the beginning it is easily achievable, but after 10-15 hours I can no longer collect data as fast I need. I'm not quite sure if this is a problem with my code LabVIEW, the NI USB-8451 box or the slave device. But if I stop running the LabVIEW program and start it again, everything returns to normal.

  The slave device is a personalized card with a microchip PIC which acts as a slave I2C and returns the data at the request of the master. I can't imagine anyone will be able to determine if this is a problem directly, but if we can rule out the other two (code LabVIEW or the NOR-8451) as the source of the problem so I know it's my slave device.

  I've greatly simplified the LabVIEW code that I used to collect data on I2C and I see even this gradual slowing down over time. Attached, it's that the very simplified VI and the data file, it produced. I only ran it for about 45 minutes, but from the beginning to the end we see again that the enforcement timeframe is rising.

  I hope I'm just doing something stupid, thanks in advance!

  -Aaron

  Aaron,

  Do not have the additional module responsible for these functions, but I'm sure I know whats going on.  It seems that each time through the loop 'OR-845 x I2C Create Configuration Reference.vi' creates a new reference.  After a while it will start to slow things down.  Better to open the reference before the while loop starts and spend just the reference in the loop.  Don't forget to close the reference after the loop stops.

• Can I install norton antivirus on the surface running on windows rt?

  Can I install norton antivirus on the surface running on windows rt?

  Can I install norton antivirus on the surface running on windows rt?

  N ° no programs can be installed on the Surface. Now, if Norton makes an app to the Surface, then of course you can install the application. In my opinion, the Group advocate is more than enough for safety, we have run Defender and Security Essentials since the beginning and have never had a virus. Now that both programs have merged into one big program of Defender, just us that.

• How to stop disk check to run every time that windows vista starts?

  How to stop disk check to run every time that windows vista starts? I had a problem with one of my backup disks so I removed it, but now the drive is still running a disk check whenever I boot my system. It takes so long to run and there is no error, but it starts every time. Why and how can I make sure that she? I read similar questions, but they don't tell you how to run a disk check, they mention however that "If you want to cancel the regular disk for some reason check, check out this guide." but tell you what guide or link?

  Hello

  This tells you how to enable and disable it:

  How to difficulty Chkdsk will not run at startup in Vista
  http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.html

  Video: Stop Check Disk from constantly running at startup in Windows Vista
  http://blogs.TechRepublic.com.com/itdojo/?p=193

  ChkDsk runs every time Windows starts.
  http://www.WinVistaClub.com/T20.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• My says Windows Vista update, phase 3/3, do not turn your computer, that hard thing 24 hours, I can't start menu, I can't go down the screen of Windows Vista update

  I have a laptop, ran a software antivirus and then he says to Windows Vista is to install the updates, phase 1 of 3, then 2/3, then he is stuck on the phase 3/3 for 24 hours, if I turn the computer market and unplug it and try to turn back still evokes the same screen. very frustrated.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  And make sure you only set the CD/DVD drive to be 1st in the boot order to boot from the drive that you have just made

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• WiFi pilot slows down the closing of Windows 7

  Since I installed the new driver for Ralink Wireless LAN RT3572, it slowed the computer "Shut Down" for more than two minutes, I can't compromise uninstall it because it connects to 3 times the speed of the former driver, is there a work around for this annoying question?

  Changing the value of 'WaitToKillServiceTimeOut' in the registry did not a thing. Disabling all other programs and start-up services did nothing either, only by uninstalling the driver Wi - Fi done shuts Windows down without any delay.

  Hello

  Check with any 3rd part antivirus/security program where there is a conflict with a
  of them. You can reinstall the driver and uninstall 3rd party antivirus then
  Run the removal of its creator tool to see if that clears the issue. Use the clean boot method
  to see if any conflict can be determined. (Even if the chances are, it's the driver itself.)

  MyEventViewer can be verified at the time of the event within a second or so of the
  time of the event to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it a bit before and after the time of the event.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  =========================================================

  RALink is now Mediatek.

  You must contact Ralink/Mediatek support and/or the manufacturer of the device OEM otherwise Ralink
  as there is obviously a problem with this driver. If there is also a separate device OEM manufacturer
  check in their forums (if any) for known issues.

  RALink
  http://www.ralinktech.com/en/index.php

  MediaTek
  http://www.MediaTek.com/en/

  RALink - Support and downloads (check with the system manufacturer Maker/motherboard or the)
  1 real device manufacturer.)
  http://www.ralinktech.com/en/04_support/support.php?SN=500

  MediaTek - Downloads - drivers and Firmware (check with system Maker/motherboard
  Producer or manufacturer of the 1st real device.)
  http://www.MediaTek.com/en/downloads/

  MediaTek - contact us
  http://www.MediaTek.com/en/about/contact/?contact=WiFi-technical-support

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Unable to turn off the computer, it will restart every time in Windows Vista.

  Original title: portable computer complete crash

  I am running Windows Vista Home Premium on HP Pavilion DV2208e.
  A week using Adobe Photoshop Lightroom, the screen went black and all the lights on the laptop has continued. I tried to stop the laptop by pressing the power button, but it did not work. The only way to stop the laptop was to unplug the power cord. The next morning, that I started it again, with a notice "Windows did not close properly, how you want to proceed.» I opted for "start Windows normally". It seems to work very well, with the expection that the date had re-fixed at the date where Vista was installed first of all a few years ago. Later, when I tried to stop the laptop by choosing from the menu start 'Shut down', the laptop shuts down normally, but then 2-3 seconds more later handed on himself. I tried several times and it's always the same, the way to stop it is by pressing the power button, then whenever it restarts it new note that Windows not stop correctly. Also the black screen crash turned up almost every two days.

  I tried reinstalling antivirus and did a full scan. Also used ccleaner and décliqués "Automatically restart" in the advanced system settings. But nothing seems to have worked so far.

  In computer management, I can see critical events that seem to correspond to the time when the black screen error occurred. They say the following:
  The last sleep transition was unsuccessful. This error can be caused if the system unresponsive, failed, or loss of power during the transition from sleep
  Log name: System / Source: Kernel-Power / event ID: 41 / level: criticism / user: SYSTEM / OpCode: Info / task category: no / keywords: (2)

  Help, please...

  Hello

  It seems that the problem is related to hardware. I'm offering please contact the manufacturer of the computer (Hp) for material assistance.

• changes of date & time on windows vista

  Why changes in the date & time on my windows vista toshiba

  Today, June 29, 2012 08:30 my computer0it was on July 1, 2006 12:30 am.

  Verify that the time, date/year & time zone are set correctly

  A low CMOS battery can sometimes various issues, including slow, locking unexplained performance issues as well as others.
  It is quite rare, but the battery is relatively easy to replace, check the manual of your computer/motherboard for replacement details.
  Generally, the battery is a watch battery "CR2032", about the size of a nickel.
  http://www.computerhope.com/issues/ch000239.htm

  UTC/GMT is 04:44 Saturday, June 30, 2012

• Acer laptop computer slows down with Orion running in Vista

  I have the same problem. I use Windows Vista with my Acer and the laptop slows down and ends up hooking up often enough (despite the fact that I updated to 4G). When I did an extinction forced because I could not stop more that once I saw the Orion message runs. If I remove Orion in my system, will hit anything?

  Hi news,.

  Please provide more detail about the Orion program.  In addition, please see the following article to help with performance on your machine:

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Disabling services not microsoft and startup programs for Windows Vista

  I have Windows Vista on my laptop and for some reason some difficulties to install updates for Microsoft Office 2007 security. I got a microsoft support shadow person my computer and fix the problem for me. The problem is that I have to disable all non-microsoft services and first start a number of issues on my computer and I can't remember how he disabled them.

  In the Start Menu search box type "run" without the quotes. In the run box type "msconfig" without the quotes. When open the System Configuration utility, click the Services tab, check the box that says "hide all Microsoft services". When Microsoft services are hidden, clear the check boxes next to the other services. Click apply and then click OK, close the System Configuration utility and restart your computer. After installing the security updates restart if necessary, and then restart the System Configuration utility, put checkmarks in the boxes unchecked, you uncheck "Hide all Microsoft services", click on apply and OK, close the System Configuration utility and restart your computer. Jim - MVP Windows Live - moderator of the Forum - live a care - Live Mesh - Microsoft Security Essentials

• XP SP3 - slows down several times a day

  There is no running scans

  Manager tasks indicates the low CPU usage

  Nothing is using too much memory

  Taak Manager does not show multiple processes for anything other than shows to multiple instances of a specific application.  This application displays does not.  It lasts for a minute or 2, then returns to normal.

  I'm out of ideas.

  Any help appreciated

  Thank you

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Slow down in time for lots of email complete

  About two days ago, we noticed a dramatic slowdown in the time required for a batch of e-mail to complete the shipment.  I called yesterday and told me that it was a matter of Eloqua and it should be resolved quickly, but today I note once again, that it is so slow... I have an email that has been running for 1 hour and 15 minutes and only 59,000 were completed.  Is anyone else noticing the slowdown?  anyone at eloqua can give us an idea of when this will be fixed?

  of what I was said, it was a matter of Eloqua and they are working on it now... hope he gets fixed quickly

• Slow Internet with WiFi using Windows Vista. (HP Pavilion Slimline S3100Y PC)

  I had my computer since 2007. I clean my cookies and files with Internet options and auto defrag as well as manual defragmentation.  I play * Wars on FB, have accounts relating to my private bank bills.

  I'm affected by internet very slow and freezing. I have a granddaughter attached to my WiFi with an Ipod and an Iphone.

  I spent a considerable amount of money to have my PC cleaned and upgrade memory.  It has been upgraded at Staples.

  I don't really know what to do.

  My WiFi is done by Suddenlink cable.

  Any suggestions

  Thank you

  Ron

  Hello

  We do not know what you have internet download speed must come from your ISP (Internet Service Provider).

  You discover the speed of their share, then test it?

  http://www.Speedtest.NET/

  First suggestion if you have speed issues and freeze would be to do a full scan of malware;

  Download, install, update and scan your system with the free version of Malwarebytes Antimalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  See you soon.

• ERROR: The action window says: "NO ACTION is AVAILABLE" while running Norton 360 'Difficulty now' utility in the Windows Vista-based computer.

  Original title: registry cleaning.

  Norton 360 has an Amber 'FIX NOW' on registry cleaning, but when he finished a result message appears "ERROR".

  The window for action says: "NO ACTION is AVAILABLE!"

  So what is the solution to this you problem.

  I also tried "RUN CHKDSK" for example. type cmd then ok followed by "chkdsk c: /f /r.

  Now I get ' ACCESS DENIED AS YOU DO NOT HAVE the PRIVILEGES SUFFICIENT. YOU HAVE TO INVOKE THIS UTILITY

  RUNNING IN ELEVATED MODE '?

  Hi BRIAN,.

  (a) I suggest to uninstall Norton temporarily using the removal tool.  You can download & run the Norton removal tool to remove Norton completely from your machine & see if the problem still occurs.

  Download and run the Norton removal tool to uninstall your Norton product

  (b) later, reinstall the Norton software.

  You can also contact Norton support to obtain assistance.

  Hope the helps of information.

  Please post back and we do know.