changes of date & time on windows vista
Why changes in the date & time on my windows vista toshiba
Verify that the time, date/year & time zone are set correctly
A low CMOS battery can sometimes various issues, including slow, locking unexplained performance issues as well as others.
It is quite rare, but the battery is relatively easy to replace, check the manual of your computer/motherboard for replacement details.
Generally, the battery is a watch battery "CR2032", about the size of a nickel.
http://www.computerhope.com/issues/ch000239.htm
UTC/GMT is 04:44 Saturday, June 30, 2012
Tags: Windows
Similar Questions
-
I can't change the date & time to receive automatic updates of Windows XP - help!
How can I change the date & time to get automatic updates - I've tried everything and did what I was asked to do - still not able to do! Lin
What happens when you try to do?
-
Why an amplification of the RAM does not change the index performnance of windows vista?
Why an amplification of the RAM does not change the index performnance of windows Vista?
Hello
I m not very well, but maybe you have more than 3 GB of RAM and Vista 32 bit.
Usually the 32 bit OS is capable to manage and send only 3.2 GB.
The more than 3.2 GB RAM will not operating system used and therefore would not increase the index
In addition the laptop will be not really faster after upgrading RAM. You will notice better performance using applications at the same time, but this does not affect the index of Vista.
But this is only my personal hypothesis.Welcome them
-
How to stop disk check to run every time that windows vista starts?
How to stop disk check to run every time that windows vista starts? I had a problem with one of my backup disks so I removed it, but now the drive is still running a disk check whenever I boot my system. It takes so long to run and there is no error, but it starts every time. Why and how can I make sure that she? I read similar questions, but they don't tell you how to run a disk check, they mention however that "If you want to cancel the regular disk for some reason check, check out this guide." but tell you what guide or link?
Hello
This tells you how to enable and disable it:
How to difficulty Chkdsk will not run at startup in Vista
http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.htmlVideo: Stop Check Disk from constantly running at startup in Windows Vista
http://blogs.TechRepublic.com.com/itdojo/?p=193ChkDsk runs every time Windows starts.
http://www.WinVistaClub.com/T20.htmlI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Cannot change the hosts file in Windows Vista Home Premium
Posted on behalf of a client:
Cannot change the hosts file in Windows Vista Home Premium. Read-only value.
Help, please.
Hello
I suggest you to try the steps below and check if it helps.
Method 1: Try to take possession of the host file and check to see if the same problem happens.
To apply permissions to a file or a folder:
a. right click on the file or folder and then click Properties.
b. click the Security tab and then click Edit.
c. do one of the following:
· To set permissions for a user who is not listed under group or user names, click Add, type the name of the user or group, click OK, select permissions and then click OK.
· To change or remove permissions for a user or an existing group, click the name of the user or group, select the permissions and then click OK.
For more information, see the article mentioned below:
What to know before applying permissions to a file or a folder:
Prevent changes to a file or folder (read-only):
http://Windows.Microsoft.com/en-us/Windows-Vista/prevent-changes-to-a-file-or-folder-read-only
Hope this information is useful.
-
How can I change the Welcome Message on windows vista edition Home premium?
OK, I want to change the welcome message in windows vista when my pc loads, it says welcome.i want to change to accommodate Fred as his load. And I don't know how to do this.
Hi Bigboy316,
The video offered by Murphy will work, but you'll need Reshacker: http://www.devhood.com/tools/tool_details.aspx?tool_id=420 to do so. It's actually quite easy and foolproof, simply follow the steps: http://www.youtube.com/watch?v=3Tv_vjQd7Rc&NR=1&feature=fvwp
-
It is my first visit to this feature of Microsoft Internet. It defines a model for constructive citizen of the world form a more perfect union.
Thank you.A "more perfect union"? Really? I'm not terribly interested in forming a union with a person, perfect or not, but I'll gladly try to help you with your it questions. To do this, you will need to provide more information about your computer and your questions clearly and concisely in the body of the message, not in the subject line. These links will help you with your next post:
http://www.elephantboycomputers.com/page2.html#Usenet (you can ignore the references to Usenet discussion groups / as you post on a web forum, but any suggestions on how to write the post are applies here too)
http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question
Change the date and time of Vista:
http://Windows.Microsoft.com/en-us/Windows-Vista/set-the-clock
Don't know what you mean by "attributes".
You change a file name in Vista right click on the file and then left-click 'Rename' or by clicking the file to select it by pressing F2. MS - MVP - Elephant Boy computers - don't panic!
-
Unable to turn off the computer, it will restart every time in Windows Vista.
Original title: portable computer complete crash
I am running Windows Vista Home Premium on HP Pavilion DV2208e.
A week using Adobe Photoshop Lightroom, the screen went black and all the lights on the laptop has continued. I tried to stop the laptop by pressing the power button, but it did not work. The only way to stop the laptop was to unplug the power cord. The next morning, that I started it again, with a notice "Windows did not close properly, how you want to proceed.» I opted for "start Windows normally". It seems to work very well, with the expection that the date had re-fixed at the date where Vista was installed first of all a few years ago. Later, when I tried to stop the laptop by choosing from the menu start 'Shut down', the laptop shuts down normally, but then 2-3 seconds more later handed on himself. I tried several times and it's always the same, the way to stop it is by pressing the power button, then whenever it restarts it new note that Windows not stop correctly. Also the black screen crash turned up almost every two days.I tried reinstalling antivirus and did a full scan. Also used ccleaner and décliqués "Automatically restart" in the advanced system settings. But nothing seems to have worked so far.
In computer management, I can see critical events that seem to correspond to the time when the black screen error occurred. They say the following:
The last sleep transition was unsuccessful. This error can be caused if the system unresponsive, failed, or loss of power during the transition from sleep
Log name: System / Source: Kernel-Power / event ID: 41 / level: criticism / user: SYSTEM / OpCode: Info / task category: no / keywords: (2)Help, please...
Hello
It seems that the problem is related to hardware. I'm offering please contact the manufacturer of the computer (Hp) for material assistance.
-
Change of date/time...
I have a question about the change of date and time... Thank you very much in advance.
I have. CR2 files and I want to edit the news ' date time original "... I want to change this info in the raw file, so I clicked on the checkbox "write date or time changes to in files gross owners ' in the catalog settings window... and then, after the change date and time with the 'edit capture time', Lightroom wants to save the changes, and after clicking the arrow on the thumbnail It creates a file. If date/time change is to write directly to the raw (because of catalog above settings) file, why does the Lightroom create sidecar .xmp file?
There are two things going on here.
1. When you change the capture date/time (Date time Original), the change is immediately reflected in part EXIF metadata Panel in the library module. Because it is a modification of metadata, the arrow of the warning appears on the thumbnail (if you have configured to display display options)... and by clicking on this button brings up the dialog box "metadata changed, want to check the disk. Note that this happens when you do any type of metadata change, not simply by changing the date and time. At this point, you can either decide to write the metadata to disk, or not... If you write that replaces your XMP metadata I assume you mean 'Save', but if you don't then just ignore it. Of course if you say 'Save', then Lightroom will do as requested and write metadata, that if it's a DNG, JPEG, TIFF etc., metadata are written in the XMP in the file header section... but if it's a RAW owner then it is written in a sidecar XMP.
2. the second thing is that if you have the ability to set in the catalog settings to save the changes to the date and time in the raw files owners, then the change you make is reflected in the Raw file... it is a different change to the updated XMP.
-
I have Fujitsu Siemens ESPRIMO Mobile (laptop) with pre installed Windows Vista Home basic. It is in the English language.
When I want to re-installed Vista using (supplied with Labtop) restore DVD, after the installation, it is in Arabic. I tried to change this language but I can't. Could you please help to solve this problem.
Thank you
Hello
You will need to contact Fujitsu about this.
You cannot change languages with Vista Ultimate and Enterprise.
You can have a different result if you try reinstalling using this method.
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
How do I change the language setting in windows vista edition Home premium.
I have a sony vaio that runs on the Italian version of window vista Home premium. How can they change the English language instead of Italian language
I gave you information on what to do.
Here is the link to Microsoft:
http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-display-language
See you soon.
-
I can't change the color on my windows vista? I can't get normal standard
I'm changing my color on my vista, but some how I lost call color changes, I only have a standard
so bad I can't change to another color I want too.
would like to change to pink, but I seem to not all colors
Check your settings in "Theme":
1. right click on your desktop
2. choose "Customize."
3. under "Personalization" on "Theme".
4. in the "Themes" under "Thème" tab click on the drop down arrow small triangle and click on 'Windows Vista', then click on the button 'Apply' then 'OK '.
5. If 'Windows Vista' is already selected, select "Windows classic" instead, then click 'Apply' and then select 'Windows Vista', click the 'Apply' and 'OK '.
Now, try changing your colors. -
Help to restore my data using MS Windows Vista backup
After having suffered my own system, Im trying to restore my data from the backup disks created from Vista backup software use.
Hi Albert,
ؠ What type of backup should be performed?
ؠ What a full backup of the computer?
ؠ did you try a restore on your computer?
If you have performed a full backup of the computer, it is a complete restoration. You cannot choose to restore individual items and all of your current programs, Control Panel, and the files are overwritten.
http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backupRestore files from a backup
http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backupBack up and restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questionsBasic backup and restore file
http://www.Microsoft.com/Malaysia/Windows/products/windowsvista/features/details/backup.mspxPrevious post: the result.
Bindu S - Microsoft Support
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
How can I change the date/time data (Sysdate) without changing the date of the BONE
Hi all
I have a need to change the sysdate to a database for testing purposes and need to fix the date of database at a date later (e.g., 30/06/2009). I have 2 other instances on the same server in order to change the date of the OS is not an option. I am familiar with the sysdate affecting a fixed value, but doing so changes the date to a constant because I still need time to elapse. I searched the forum and cannot find a way to do it. Any help would be greatly appreciated.
Thank youLike this:
ALTER SYSTEM SET FIXED_DATE = "." Published by: user503699 on May 14, 2009 21:13
-
Is it possible to get the program to reset or what to do, I need to connect to my windows vista and im the only admin on my computer
http://support.Microsoft.com/default.aspx/KB/940765/en-us
How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account
As you say: ' I forgot I guess that if he tells me ', read the above info.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/default.aspx/KB/189126
"Microsoft's strategy concerning lost or forgotten passwords"
Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.
Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator
See you soon.
Mick Murphy - Microsoft partner
Maybe you are looking for
-
is there a solution for mozilla gel when the latest version of flashplayer is enabled?
Since the update to the latest versions of mozilla and flashplayer my browser has on the ground to stop. It's only fixed by disabling the flash player module, but then I can't watch any video content. This is the case for a few months. I have a HP dv
-
Can I use the drivers for model Satellite A100-012 to the model A100-599?
Hello. I wanted to know that the drivers of the model a100 012 can be used to model a100 599? Configuration for both models is the same.
-
line that appears on the monitor screen
There are line appearing on my screen, says that there is a problem with the image, and then asked me to restart my laptop. now im in safemode, my speakers does not work, what could be the problem?
-
Installed Windows 7. can not see my iphone on itunes. I have reinstalled itunes. I had this problem when I was with Vista. Help, please!
-
Hello I'm trying to set up a dual-boot XPpro on my Vista machine. I found the instructions detailed at various locations. I prepared a score of 30G on my SATA drive and booted from my XPpro and XPpro (SP2) retail drives. The score is quite small b