Norton Ghost 9 / converter (take two).

Similar Questions

• Firefox takes two more minutes to load, the apparent clash with Norton Internet Security

  Today, I tried to start Firefox in the Norton Support menu, it took more than two minutes to load. After that, it takes two minutes during restarting. When he finally he directs all Web sites a quick clarification, with the exception of Norton, which is very slow or not at all. Three sessions with norton support cat have not improved anything, and after the troubleshoote of Firefox, including resettlement are not resolved either.

  I just finished a chat session with Norton who showed me where them exclude things Autoprotect and Firefox loads like greased lightning now. I enclose a document spirit a screenshot of the settings. Thank you for your support.

• Norton Ghost crushes on Satellite Pro A100

  Good afternoon everyone,

  I'm having a problem with a few laptops I have here. I just got a few Satellite Pro A100 but I have problems with making an image of the HARD disk. I tried Norton Ghost and a few other programs that can back up a disk to an image, but none of them worked. For some reason, they all crash when they are tryig to get started.

  I tried it on 3 different PC laptops and failed each time, exactly at the same place. I guess it has something to do with how these programs manage the memory.

  If someone has had this problem before and have you found a solution for this?

  Hello

  I doubt that the problem is something serious. But I can say that your best bet is to bring to an authorized service provider. The hard drive under sometimes is used to disconnect after a bit of work. But this isn't anything you can do to fix it. You must take it to a repair shop and ask them to look at. The reason that Norton blocked is because it cannot read the disk hard because she is not completely connected. I would like to know how this happens. And one last thing, if you want to turn the laptop and to take cover in the lower right and see if the hard drive is seated properly and firmly. Then try to use the ghost.

• TECRA R10 - how to make an image of NORTON GHOST 15 to the network

  Hello

  Here are the steps to enable NORTON GHOST 15 bootable CD make a TOSHIBA TECRA R10 image to a shared network folder. I guess that this same procedure also works on many other TOSHIBA models, but it of the model I and could test.

  (A) download the site WEB of Toshiba drivers following for TECRA R10, Windows XP, LAN drivers (Version INMA20W32W9C)
  File: lan-20081015154144. ZIP
  Link: Link: [http://support1.toshiba-tro.de/tedd-files2/0/lan-20081015154144.ZIP]

  (B) insert a pen drive and create a folder named example * X:\NIC*, where X: is your pen drive letter.

  (C) unzip * lan-20081015154144. ZIP * and a copy of this file on a pen drive only the following files:

  -e1y6032.inf
  -e1y6032.sys
  -e1y6032.cat
  -e1y6032.din
  -NicCo26.dll
  -NicInstQ.dll
  -e1000msg.dll

  (D) not to remove the disk from the pen and insert the CD bootable Norton GHOST 15 on the CD player. If it starts, click option * output *.

  (E) stop your laptop.

  (F) power and on the first moments, press * F12 * display boot source options. Select * CD * icon using the left and right keys and press on * ENTRY *.

  (G) confirm that you want to boot from the CD by pressing any key

  (H) to accept the Symantec License Agreement

  (I) tab left * utilities * and click on entry * load a driver *.

  (J) use the mouse to select * computer * and open your USB (e :))

  (K) navigate to the folder * F:\NIC* and open the file * e1y6032.inf*. You should receive message * the selected driver has been loaded correctly *.

  (L) tab left * network *, click on * start my Networking Services *. You should not receive any error message.

  (M) on the same tab, select * Ping address *. Insert the IP address of your computer and it should ping.

  (N) tab left * House *, click on * Back Up My Computer *, * following * and insert the Norton (e.g. 99-9999-9999-999999) license key.

  (O) to select the disks that you want to backup, then click on * following *.

  (P) click on * Browse Network Neighborhood * select computer and the shared target folder. If necessary, you can create your own folder.
  (NOTE: shared folder must have write permissions.) On my QNAP NAS system, I need add the everyone permission in the target folder.

  (Q) click on * following * and I suggest selecting * check the recovery point after creating * and type a brief description of the State of your system

  (R) click on * following * and * finished *.

  (S) backup starts and ends with the message: * full backup: XX:XX:XX *.

  (T) remove the CD disk and a pen. Click on * output * and confirm that the computer may restart.

  (U) you have now a complete picture of you system, without installing any software. It woks with all versions of Windows including Windows 7 Ultimate 64 bit.

  I hope that this text could be useful to your work.

  Good luck.

  Antonio Nuno

  Very well!!!

  Thanks for sharing your experience with us!

  Could be useful to others!

• HP pavilion dv7-4114tx: can the dv7-4114tx, take two 8 gig of ram sticks?

  Hi guys, I have a Pavilion dv7-4114tx, which comes standard with 2 x 4 equal concert stick with 8 GB of ram. Can the dv7-4114tx, take two 8-gig sticks to match the 16 GB of ram. If so, what speed/configuration Ram should I buy? Thank you. There seems to be various options - hp told me yes today on the phone, but the forums indicate no?

  Thanks in advance.

  Gazzzz

  PS: the machine is out of warranty and it runs win7 64 bit and has an Intel i7 processor. The bios will address 16?

  Hi @Gazzzz,

  Please consult the page # 3 of the manual below where it shows the maximum RAM supported on this device is 8 GB. It is 4 GB on each slot.

  http://h10032.www1.HP.com/CTG/manual/c02666747

• HP z800: HP z800 may take two

  Hello and thanks for your help once again,

  I wonder if HP z800 may take two processors intel xeon 5690 3.46 GHZ and two NVIDIA Quadro 6000 6 GB graphics card at the same time?

  YES

• Confusion with priority BIOS after running Norton Ghost.

  Years ago, I had done a fresh XP install on a 75 GB Seagate hard drive. I have an old Maxtor drive of 25 GB the first connection on the Ribbon of the IDE and the Seagate is the second link on the same Ribbon. I have updated the BIOS to boot from the Seagate.  Performance lately on the Seagate has not been good, so I decided to start from scratch. I did a fresh install of XP on the Maxtor and everything is saved for this drive. Subsequently, I deleted the partition of Seagate and used Norton Ghost 9.0 to copy the contents of the Maxtor to the Seagate. Then I changed the priority of hard drive BIOS so the computer would be of the Seagate. When the computer is first started after the copy, I got a blue screen which took place from the disk check. Subsequently, it seemed to boot from Maxtor, thanks to the constant ROAR. The Seagate is quiet.
  In addition, when I opened up under administrative tools computer management, the Seagate drive appears as drive D rather than C. I was confused so I saved a file on the desktop to confirm which drive has started. The resulting file saved in D:\Documents and Settings\... folder.  It makes no sense to me.  Why does the computer start to the Maxtor with the Seagate with the priority in the BIOS? In addition, since he did start the Maxtor, I do not understand why the file was saved on drive D instead of C (Maxtor) (Seagate). Remember, I had the same hard drive and BIOS before configuring backup and run the ghosts and files were copied on the disks expected during the priming for the Seagate.
  Does anyone have an idea what is happening?

  The BIOS follows it of own rules to choose which drive start.
  Once he locates the starting tips for, then turns the Windows.

  Windows (XP) also gets its own way to begin - so you must be sure that it's boot sequence is correct.  I got a new SATA Raptor drive which was starting slow as molasses - until I found that the system was booting from the old IDE drive before he transferred control over the fastest SATA drive that Windows has been installed on.

  Finally, other programs have different ways to determine which drive they use.
  Add a copy of a disc (using Ghost) can keep registry settings for different drive specifications.

  IMO, on a XP system, you must have 1 player who put in shape to boot from.  The rest should be just the storage drives.

• You can install Norton Ghost 15 backup with Norton 360, or it is not recommended?

  I installed Norton 360 on my Windows XP computer and I would like to know if I install Norton Ghost 15 if it would conflict with Norton 360 or both would be not compatible?

  I think they are compatible.  360's anti-virus; Ghost is the backup.  If you really want to know the official answer, I would contact Norton.

• Microsoft product for backup and system image recovery... similar to norton ghost.

  Hello

  I'm looking for a Microsoft product that is similar to the image of norton ghost... where we can restore the system in case of crash of the backup of the image... Yes I know, in windows server, that we have backup utlity that stores the file in .bkf format however it requires a running operating system to restore the file... I want to, where we can build the system, including the os from system crash image file.

  Thank you
  Wine

  I don't think that there is nothing that makes Microsoft who will do what you want with Windows XP. I prefer Acronis True Image Ghost. MS - MVP - Elephant Boy computers - don't panic!

• Stopped my Norton Ghost and Norton checked my computer and found that my Vista Premium do not have or plug and play services event log

  original title: journal of events in Vista Premium

  I had to reinstall Vista after a hard disk failure. My Norton Ghost stopped and Norton checked my computer and found that my Vista Premium do not have or plug and play services event log.
  Do you know how I can get them?

  The event log service will not start. I tried manually, start it and get this message.

  Windows could not start the service on the Local computer Windows event log.
  Error 998:Invalid access to memory location.

  I don't understand why it happened all of a sudden. Does anyone have an idea how I can get going again.

  Hello

  Method 1:

  Event Viewer services are - primary (Windows event log) it has no dependencies, but is dependent on the Scheduler of tasks and Windows event collector.

  Click on start and type Services) in the search box

  (b) right click on the list of programs services and selecting run as administrator

  (c) locate the services listed above and check if they are started.

  Method 2: How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Is it possible to reinstall Vista OEM on the HP laptop after using the Norton Ghost software?

  Hello

  I'm in a bit of trouble. Please help me. In 2007, I bought a HP laptop which of course came with a preinstalled Windows Vista. My friend did a back-up for me using Norton Ghost. Now I do not use Ghost. I would like to re - install Windows Vista on a CD and save by using the product key given in the back of my knees (OEM - his name I guess). Since I use all the same material I hope it will be accepted but I'm not sure. My question is if it will work? Is it legal this Windows already registered in my name for 3.5 years. Please help me and answer me.

  It is also possible to download Windows Vista from www.microsoft.com?

  Thanks in advance.

  Kind regards.

  Abid.

  As long as you use the same reinstall OEM or restore DVD (Vista is too big to fit on a CD) initially provided with the laptop, you will have no problem.

• Partition problems with Norton Ghost HP_RECOVERY. Can I remove it

  Norton Ghost like no my HP_RECOVERY partition, maybe because it is almost full.  Can I remove or at least delete all files in there?

  Hello

  If you created your set of recovery disks - (these will be no only reinstall the OS, but recreate the recovery Partition as well)-you can remove the recovery Partition.  If you open the folder Recovery Manager (in all programs), it is usually the option to do so.

  Kind regards

  DP - K

• Impossible to install Norton Ghost 15 under Win 7

  I get 'Error 2738 could not access VBScript Runtime for custom action' when I try to install Norton Ghost 15. Installation of program stops to notice of the error and then shock the partial installation. Someone at - it ideas on that?

  Hi Bill18163,

  Thank you for visiting Microsoft Answers!

  This error message indicates that the VBScript engine is not currently registered on the machine where the installation/uninstallation.

  I suggest saving the VBScript engine and then try again to install Norton Ghost 15. Follow these steps:

  1. run the command as a prompt administrator.

  2. Start Menu-> all programs-> Accessories.

  3. right click on command prompt and select run as administrator.

  If you use the 32-bit version of Windows:

  Type cd %windir%\system32 in the command prompt and press ENTER.

  If you are using the 64 bit version of Windows:

  Type cd %windir%\syswow64 in the command prompt and press ENTER.

  4. type regsvr32 vbscript.dll in the command prompt and press ENTER.

  Kind regards

  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• This is the 1935 error once again, the installation of Norton Ghost Windows 7 64 bit

  Hi, I say 'yet' because it's a frequently asked question, unfortunately with no viable solutions.

  I installed Norton Ghost 15 on this machine 3 years ago. No problems. Today, when you pull up the ghost, she suddenly want to run the MSI installer for some reason any and then complains about something. Unfortunately I got a copy of the error. I just uninstalled completely, using the Symantec removal tool.

  When you try to install Norton Ghost again, I get this:

  

  I unchecked .net framework 3.5 in Windows features, rebooted, checked again and rebooted. I installed Microsoft C++ 2005 and 2008 Redistributable. This I did because another post suggested to do this.

  I also activated the journal feature detailed in the Windows installation program and get a huge file full of data, which tell me what I can use. Yes, something went wrong shot, but in this (these) file (s) there is no special section that stands out in a way that tells me that what in fact was wrong.

  Now, is say, not possible to obtain information in plain language? Saying that the Assembly is absent, this file is missing and so on. Because obviously something is not here that should be there, who were 3 years ago, when Norton Ghost installation went flawless.

  Or is it something else? "An error occurred during the installation of assembly component", which component? And what is normally the cause of this problem, which will normally not when an assembly component cannot be installed?

  
  My question basically goes like this:

  How can I know what is the real error? Assembly that is missing, have what is missing? The blind approach isn't trying for me, there must be a scientific way of this approach!

  Any help appreciated!

  -Ingvar

  OK, I found the solution:

  Error 1935 resolved

  Big - just install Ghost until the error message. Do NOT click OK, instead, use task or much better, Manager procedure such as SysInternals Monitor to kill all processes of msi windows installer and everything that has nothing to do with Norton.

  Ghost 15 is now installed and you can register and use it.

  Problem is, there is a current cancellation, who will run the next time you want to install (all) application.

  Delete these registry keys:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\InProgress

  and

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\InProgress\Rollback

  Now, everything should be good, at least it looks so here!

  Detective Conan.

  -Ingvar

• After using Norton Ghost to clone new HARD drive, get the message «This is not a real Windows 7»

  Hi, I used Norton ghost 15 clone my old original (750 GB) to a new HDD (1 TB) hard disk, all seemed well, start in windows 7 from screen, but when he arrived at the office, there was a line saying "this is not a genuine copy of windows 7" and nothing shown on the desktop but a light blue background. I have my Win 7 DVD, but there is no way to indicate to the system on my product key.  I'm stuck on a blue screen.

  After seeing another suggestion to use MGAdiag, I created a new boot disk and it linked the diag.  The output is cryptic, so I guess that I have validated only my new installation and there is no obvious way to point to the other disk.  But the output is lower.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - 2QCP3 - BQCQQ-HVY8B
  The Windows Product Key hash: fRtBOPOPT00WHeJEbwGV/OqVH6o =
  Windows product ID: 00371-177-6290927-85271
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7600.2.00010100.0.0.048
  ID: {25853437-7ED8-4F60-9297-19CED5282884} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7600.win7_rtm. 090713 1255
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Internet Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]

  Other data-->
  Office details: {25853437-7ED8-4F60-9297-19CED5282884}1.9.0027.06.1.7600.2.00010100.0.0.048x 64*-*-*-*-HVY8B5S-1-5-21-2774350695-836626266-3624229488the system manufacturer,System Product NameAmerican Megatrends Inc. 00371-177-6290927-85271 1208 20100730000000.000000 + 000E3BA3607018400FE04090409Time(GMT-08:00) Standard Pacific03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: e838d943-63ed-4a0b-9fb1-47152908acc9
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00170-177-629092-00-1033-7600.0000-3132012
  Installation ID: 014524044086706882994890873683587011910490414255584555
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: HVY8B
  License status: initial grace period
  Time remaining: 41280 minute (s) on (28 day (s))
  Remaining Windows rearm count: 3
  Trust time: 10/11/2012-06:49:09

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Not registered - 0 x 80040154
  The admin service: not registered - 0 x 80040154
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: PAAAAAEACAABAAEAAAADAAAAAQABAAEAln3EZMwZHIje8kLGgJZgTsrevCAcv3Y6fj/KLK7jWVeo53ZW

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC1838 APIC 073010
  FACP 073010 FACP1838
  HPET 073010 OEMHPET
  MCFG 073010 OEMMCFG
  LASRYVITRAGE OEMB1838 073010
  OSFR 073010 OEMOSFR
  SSDT DpgPmm CpuPm

  It looks like the installation that was actually in the process.

  the only thing that your report shows is the WAT update is not installed, and it is not enabled. (you are in your grace. initial period to 28 days rest).
  a non-genuine windows will work almost normally and would not lead to the symptoms you describe. In my view, the notice is by other problems that you have.
  I can read a diagnostic report, but do not have the skills to help others.