Nosound wav playback. SPDIF is active

Similar Questions

• Mercury Playback Engine (CUDA) GPU acceleration

  Last updated Adobe Premiere Pro CC 2015.1 Mercury Playback Engine GPU (CUDA) Acceleration of work. How can I start? I have a video NVIDIA Quadro 4000 card. Windows 7. Thank you for your quick response

  Hello

  Made video and playback was not active, but that's ok. I reinstall the graphics drivers and it is already active. But thank you.

• Graphics card Quadro 4000, installed in the Mac Pro, but CS5.5.2 will not enable playback of mercury. I ' watched v

  Graphics card Quadro 4000, installed in the Mac Pro, but CS5.5.2 will not enable playback of mercury. I ' v looked but can't find any information. Install the cuda driver 4 - 2.2.10 said if Nvidia running OS 10.7.4 driver install is not necessary. In CS5.5.2, the parameters of the project, general, video playback and rendering, the only option is only the MPE software and it is grayed out. I tried to restart the computer.

  as a side note when I open PP I get an error - video filter missing AE > ADBE SubspaceStablizer missing - I don't know what this means, but do not think that it has nothing to do with the issue of mercury reading.

  I also downloaded driver Nvidia - Quadro ODE graphics driver. Under Nvidia drivers downloads, it gives several options for the 4000 Quardo for Mac, but the only one that will download is the graphics driver ODE.

  IM new to this so I really appreciate your help.

  Thanks - John

  the last two posts fixed the issue of the mercury playback engine not activated GPU accelerator. I hope this helps someone else. Thanks for all the help I received.

• PROJECT menu () displays no 'read' - should say how much writing exist

  Sometimes, somehow, an email will go into the DRAFTS folder I wanted to SEND.

  But unless the PLAYBACK indicator is activated, the menu will inform me not that there is anything in the drafts folder.

  The menu should show the number of messages in the project folder, the messages 'unread '.

  View (Alt - V) - Layout - folder pane columns
  Click the drop-down menu at the top right of the folders pane and check the column 'Total '.

• Tecra A8 and Win7 - cannot get sound card works correctly

  Hello

  I have Toshiba Tecra A8-185. This model PTA83E.

  The problem is that I installed Windows 7 Ultimate and although all the drivers work correctly, the sound system is not.
  System drivers work correctly and I see that it recognizes the sounds on a volume bar.

  When I connect the helmet too, it does not, although microphone works. I have the latest drivers from Toshiba Web site and the site Web of Realtek (HD Audio). I also tried to install AC 97, but he asked me to confirm the drivers during the installation, because they are not digitally signed, but she wants more now, until I have to disagree to drivers.

  So I don't know for sure it's a software problem. But I don't know what the problem is with the drivers.
  Help, please! You can also send me, if someone has a solution. [[email protected]]

  offi55

  Hello

  Have you checked all the sound properties, including Realtek audio Center?
  Make sure that all playback devices are activated.
  Be sure that the sound is not muted.

  Check it all and post the output please.

• Speakers and digital output device problem

  So yesterday, I installed a new video card. A Nvidia Geforce GT220. After installing it I noticed that my speakers were not working. The default program I used was Realtek High Definition Audio. I checked in Device Manager and noticed that the Realtek HD Audio Driver/program had a small yellow triangle with an exclamation point and that there are 4 new options named Nvidia High Definition Audio. Whenever I tried to run Realtek it says that the program has been installed, but may not be installed correctly. He said it was a Code 10. So finally, I deleted Realtek but the Nvidia High Definition audio drivers did not work. So, I deleted the drivers from Nvidia High Definition audio and tried to reinstall Realtek. My computer says that I installed it but there is no program to access my different options.

  Now when I check the sound folder, during playback it says peripheral digital output (HDMI) 4 times.
  Although the sound does not work.
  Im just trying to run her on my Logitech X 540 speakers. When I plug the speakers that they appear not yet as an option in the sound folder.

  I don't really know what I can do to make it work.

  I have a HP with Windows Vista 32 bit a1730n.

  Hello TheInnocentMan,

  You can try the methods below to resolve this issue.

  Method 1:

  I suggest you follow the link below and run the fix. This will automatically diagnose and repair problems with sound and audio on your computer. Here is a link you can follow:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Method 2:

  Check whether the default playback device is activated and the default value. It must essentially be your Realtek audio device.

  a. open peripheral Audio and sound themes by clicking the Start button, click Control Panel, hardware and sound, and then clicking sound.

  b. click on the playback tab, click speakers and then click Properties.

  c. Select the device as the default device.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Realtek Audio driver problem

  I have a problem with my audio driver that comes no doubt of my motherboard (Asus M5A97 MORE)
  This happens almost every day. Anytime my pc audio just cuts, if I try to reactivate it by unpluging and pluging back in my headphone or mute and reactivate of my audio mixer I have constant ear noise squeal.
  The only way I can fix it by changing my audio type: stereo at quadroponic and it is back to normal, but about 3-4 hours later that the audio will cut again.

  Occasional whole audio driver will be out later I have to restart my pc to fix, but when after restarting uninstalled my audio driver it's self from my pc and I have no sound at all. So of course I just download and install the driver, but it still happens.
  Is this a problem with the sound card on my motherboard? Because I reinstalled my windows and this problem still occurs.

  Hi Kris,

  Thanks for posting your query in Microsoft Community.

  I understand that the continuous sound break and sound driver gets uninstalled after a reboot. I can understand the inconvenience, and will be happy to respond to your request. Let me ask you;

  • How to install the audio driver?
  • Remember to no particular change in the computer before the show?
  • What security software is installed on the computer?

  This could be due to the incompatibility of the driver, damage, any third-party software or a card of the same mother as well. Let's try the following methods and check the status.

  Method 1: Make sure that your playback devices are activated.

  Right click on the speaker on your taskbar icon > select "playback devices"
  In the empty space, right-click and select the two ' Show disconnected/Disabled Devices "

  You can see icons for your speakers and headphones now?  You may need to activate these two.

  Method 2: Run the audio Troubleshooter

  Click 'Start' > select ' Control Panel '

  In the top-right of type search field Troubleshooting > select "Troubleshooting"

  Click "Hardware and sound" > select "play Audio"

  Method 3: If you have not tried this method, try it. Visit the computer manufacturer's support Web site and install the latest sound driver and check.

  You can see: Asus - Support

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Cannot get captions to appear after him allowing

  After dragging a legend that I created in the program in the timeline panel, a video, above, I can't see during playback.  I activated the captioning.

  you could create a 608 standard and your program or source monitor is set to 708 standard

  Make sure that the standard that you created is the standard that your program or source monitor is intended for standard adjustment option below standard enable

• Dynamic issue after upgrade 5 to 5.5

  I just upgraded from first 5 to 5.5. Dynamic links that worked on a project of first 5 files do not leave the alpha channel works since the AE 5.5 first comps. Any ideas for a fix?

  Did you update to 5.5.1? Read here: Adobe Premiere Pro CS5.5 (5.5.1) update: bug fixes, including some for compatibility to Mac OS x v10.7 (Lion) "Premiere Pro workspace .

  One of the bug fixes:

  If an After Effects composition with one background color other than black was included in a sequence and acceleration GPU Mercury Playback has been activated, the transparency of alpha channel of the composition has been ignored.

  The download links are available in the post above; I don't think it is available via help > updates yet (but you can check).

• Question performance Mac for CS5.5

  Hey guys,.

  Please forgive me if this is ignorant, but I'm a recently converted FCP user just updated my system and installed the Nvidia Quadro 4000 to improve performance. I was doing some rendering in the body and found that the performance of my computer always seems to be missing. So, I decided to run the activity monitor while making a small project.

  If I read this correctly, it seems that my system does not full capacity (by far) to do the job.

  What I see in the activity monitor, looks like my CPU is used only to about 20 percent of the capacity and RAM roughly 50%.

  Here is a link to a screenshot of my activity monitor.  Please can someone explain what I'm seeing, and if I read this correctly?

  And if so, what can I do to improve my computer performance.

  Mac OS X 10.6.8

  Model name: Mac Pro

  Model name: Mac Pro
  Model ID: MacPro4, 1
  Processor name: Intel Quad - Core Xeon
  Processor speed: 2.26 GHz
  Number of processors: 2
  Total number of cores: 8
  (By heart) L2 cache: 256 KB
  Memory L3 Cache (per CPU): 8 MB
  Memory: 16 GB

  Graphics NVIDIA Quadro 4000 card:

  Chipset model: NVIDIA Quadro 4000

  Mercury Playback Engine IS activated.

  See this article and what it points to:

  performance optimization: Adobe Premiere Pro and After Effects

• How to import a quicktime movie?

  Hello
  
  I think that it is a super simple question, how to import a QuickTime on my page? I assume that you will insert > media >? not sure what comes after? This is the wave of shock, applet, active x or plugin?
  
  Thank you
  
  Beth H

  There is not a default behavior to insert for this built into Dreamweaver, but one
  quick search on Exchange show that there is an extension to do this,
  Although I have not used. Do a search for "quicktime" here:

  http://www.Adobe.com/cfusion/exchange/index.cfm?view=sn120#loc=en_US&view=sn105&ViewName=E % 20Search xchange

  Make sure that you set the drop program Dreamweaver in order to minimize the number
  great success. Should be the second one on the list: "insert a QuickTime Movie
  V1.0.1. "

  I hope it works for you. There is some additional information on the
  extension on the details page that you might want to look to make sure
  everything works fine.

  Best regards
  Chris

  "befh" wrote in message
  News:eoao6c$84T$1@forums. Macromedia.com...
  > Hi,.
  >
  > I think it is a super simple question, how to import a QuickTime
  > on my page? I assume that you will insert > media >? not sure what comes
  > next
  > If? This is the wave of shock, applet, active x or plugin?
  >
  > Thank you,
  >
  > Beth H
  >

• audio interruptions every 30 seconds on WAV recording AND playback - computer laptop Dell 1545, Windows 7

  Recently (the last couple of weeks), my laptop Dell 1545 with Windows 7 started having a problem: when I record or reading any WAV file (or a file MPG or WMV video too by the way) with any application (I tried several), there is a stuttering or interruption every 30 seconds like clockwork.  I have tried everything and can't seem to fix it.  During playback, it causes a split second buzz or silent, on the record, missing just a fraction of a second of audio, leaving a 'leap' in the best stuff WAV audio recording.  The only changes that I made in the system in the past month have been a few updates to Windows 7.  It ruins any recording or playback, I try to do, and is very frustrating.  It does the same thing on the files that are years old and new files (reading).  If I burn these files to a CD or DVD, they play very well in the CD drive or DVD, is not a problem in the files (except those currently record during breaks).

  What I tried:

  Much, restart several times.

  Reinstall the driver for my audio interface, even if she did the same on the native sound card too.

  Download the new driver from the audio interface and install it.

  Back to the old driver, then again to the new.

  Tried to record from multiple sources, ditto.

  I tried recording through the native as well as audio interface sound card.

  Deleted 40 GB from my hard drive.

  Defragged my hard drive

  Off my anti-virus program

  Close all other programs other than playback of the file.

  All USB disconnected elements.

  Tried to plugged the charger and entirely on batteries.

  RAM tested.

  Tested CPU.

  Nothing has worked so far.

  Any ideas?

  DWasnich: I had the same problem as you yesterday after restoring my Dell Inspiron 1545 to factory image. Through process of elimination (as mentioned Gokul T) I was able to determine that one of the services was originally the audio and video to jump to 30-second intervals. I disabled the 'Intel Matrix Storage Monitor' service and solved the problem. Why this service was installed and running after the factory reload is confusing. This is one portable hard drive without needing a RAID System. I hope this has solved your problem too! Joe

• Video playback very slow failure with iGPU and dGPU activated simultaneously

  Until a few months ago, my PC has been run with an i5 760 and my current Radeon HD 7850 on items 11-first reading was smooth and I could edit my videos fine.

  However, recently I installed a new processor and motherboard - a 4770K i7. The key thing here is that it has integrated GPU (so called "iGPU") that can operate in tandem with my current dGPU (discrete GPU, the HD 7850) by the presence of jobs such as the rendering of encoding videos and sent to the iGPU in a function called Quick Sync transcode. In order to use this, I had to link a virtual/VGA monitor to my motherboard port (because according to this post by vaesauce on the forums of the OBS), and for all applications that worked perfectly (Handbrake transcode very quickly, and I can listen to with OBS with negligible performance). Except one - first elements 11.

  When I started first elements 11 to edit a short clip yesterday, I was greeted with a screen that informed me that I had incompatible drivers. I went and checked my video drivers for both of my GPU - to both day - the reinstalled and restarted. Tried once more, the same question. Past to try and change just resulted in a complete failure of video playback and audio playback. I found the solution was to disable my iGPU in Device Manager, then it works fine.

  Now, here's my question - how can I have the dGPU and the iGPU active and able to edit videos with Premiere elements 11? It all works in this way, the constant entry in the Device Manager before and after the installation of a video is very annoying (also, I'm sure PrEl 11 would benefit itself from the QuickSync!)

  > found the solution was to disable my iGPU in Device Manager, then it works fine

  As far as I know, it's the only solution, because Premiere Elements is not really designed for double graphics cards

• Pause playback on Apple Watch activity

  Hello

  I am a new user of Apple Watch.

  The application of "Activity" on Apple Watch is fantastic and helps me track my daily commute and inspires me to move more.

  However, I have noticed that this application brings together incorrect data when I went on my bike or a trip by Bus/car etc. I've seen similar problems on "FitBitt" also. Is there a way that we can suspend the collection of data on a riding/trip etc.?

  My app shows that I'm objective! (Which in fact I'm not)

  Thanks in advance.

  Concerning

  HimuBar

  Hello

  It is not currently possible to ideally to suspend the application of the activity. However, it can help calibrate your Apple Watch. Calibration will allow him to better recognize the activity and make more accurate estimates, particularly for the steps and the movement goal progress in the implementation of the activity.

  To calibrate your watch, follow the instructions in this article:

  • Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

  When monitoring your activities in General everyday wear, the application of the activity relies on the built-in accelerometer (which measures and interprets the movement of your arm). For best results, try to leave the arm on which you wear your watch to swing naturally as you move (and also do during calibration of your watch).

  Estimates of activity also dependent on your personal information. To verify that it was entered correctly and update over time:

  -On your iPhone, in the application of Eve, go to: My Watch (tab) > health > edit (top-right).

  More information:

  Use the activity on your Apple Watch - Apple Support

  Use of the workout on your Apple Watch - Apple Support

• Satellite Pro L300-165 - SPDIF can be activated?

  Got to start laptop. The A300 series has SPDIF via the headphone jack. Two models (A300 and L300) must use the same sound chipset, I think.
  But Realtek settings have no SPDIF parameter at all.
  Is it possible to activate SPDIF on my laptop? Or it is disabled by the physical layer?

  I believe that the SPDIF port is not included in this model, so the SPDIF feature is disabled.

  The brochure says that it has a headphone jack.