audio interruptions every 30 seconds on WAV recording AND playback - computer laptop Dell 1545, Windows 7
Recently (the last couple of weeks), my laptop Dell 1545 with Windows 7 started having a problem: when I record or reading any WAV file (or a file MPG or WMV video too by the way) with any application (I tried several), there is a stuttering or interruption every 30 seconds like clockwork. I have tried everything and can't seem to fix it. During playback, it causes a split second buzz or silent, on the record, missing just a fraction of a second of audio, leaving a 'leap' in the best stuff WAV audio recording. The only changes that I made in the system in the past month have been a few updates to Windows 7. It ruins any recording or playback, I try to do, and is very frustrating. It does the same thing on the files that are years old and new files (reading). If I burn these files to a CD or DVD, they play very well in the CD drive or DVD, is not a problem in the files (except those currently record during breaks).
What I tried:
Much, restart several times.
Reinstall the driver for my audio interface, even if she did the same on the native sound card too.
Download the new driver from the audio interface and install it.
Back to the old driver, then again to the new.
Tried to record from multiple sources, ditto.
I tried recording through the native as well as audio interface sound card.
Deleted 40 GB from my hard drive.
Defragged my hard drive
Off my anti-virus program
Close all other programs other than playback of the file.
All USB disconnected elements.
Tried to plugged the charger and entirely on batteries.
RAM tested.
Tested CPU.
Nothing has worked so far.
Any ideas?
DWasnich: I had the same problem as you yesterday after restoring my Dell Inspiron 1545 to factory image. Through process of elimination (as mentioned Gokul T) I was able to determine that one of the services was originally the audio and video to jump to 30-second intervals. I disabled the 'Intel Matrix Storage Monitor' service and solved the problem. Why this service was installed and running after the factory reload is confusing. This is one portable hard drive without needing a RAID System. I hope this has solved your problem too! Joe
Tags: Windows
Similar Questions
-
Grinding noise every 3 seconds on the left side of my laptop
Hello, I just bought a HP touchsmart pavilion N229tx last week and I noticed now that it has started creating noises grinding every 3 seconds every time my laptop is turned on and running. The noise comes close the wind where the air is supposed to come out.
What should I do with this problem?
Also when I bought the laptop and it opened the first time that I continue to have the fan error when starting, saying that he had found that the fan is not operational I think you're mistake 90 b. This product whenever I turn on the laptop.
Try a hard reset as follows:
(1) remove the battery and unplug the DC power adapter.
(2) press and hold the power button for more than 15 seconds.
(3) plug the DC power adapter (leave the battery for now)
4) press the power button
Who can fix the error message.To solve the noise that could be linked to the fan, you will need to contact HP warranty service. HP Service centre may replace the CPU fan.
It is always useful to include the number of the full product. You left out the first two digits and the hyphen.
-
Como puedo instalar IDT Audio to a laptop con mi Windows 8.1?
Antes tenia windows TR 7 y lo podia instalar, pero al instalarlo nuevo tratar, me da error, alguien sabe como solucionarlo?, Gracias
Hello:
See if this audio driver IDT W8.1 works for you...
This package contains the driver that allows to the Audio IDTHigh-definition (HD) in models of laptops that arerunning an operating system supported.
File name: sp63555.exe
-
Don't get any sound on my external speakers. It tells me that I have "no audio device".
Check Device Manager to see if you need an updated sound card driver. Click Start and then right-click my computer, and then click Properties. Click on Device Manager. Look down the line of audio, video and game controllers, and see if there is a point of exclamation or question marks there. If there is, you will nee to download and install the drivers from Dell.
I hope this helps. Good luck.
-
Hi Mike,.
You can override the PreUUT and the PostUUT callbacks to allow your movie file to run continuously without prompting the user for input.
Select Edit» sequence file reminders... Add PreUUT and PostUUT to the list of reminders. Now, these versions will be replace those of your process template, but will contain nothing. This means that the steps that require a user input that run normally to the pre and PostUUT will not run and therefore your sequence will be curly all the time.
When you want to stop, you need to use the Finish button.
-
Monitor, recorder and playback using ddns program
Maybe I'm missing something, but I can't install the WVC54GCA monitor program to find a camera remotely using the URL given (via TZO). Configuration features only a place for IP address, no URL. If I find the current (dynamic) IP address for the camera remotely and plug in, everything works fine, but when the IP address is changed, I'll have to re - enter the new address. A little defeated the purpose of the use of TZO.
I called technical support and after 1/2 hour, I realized that they had no idea what I was talking about. A specialist has promised to call back me, but it didn't happen. I think that Linksys, which also makes good products, should reconsider support overseas. It never works! Just blowin' - blow off steam here...
Anyone have an idea how I can fix this or what I am doing wrong?
Thank you
Anthony
Thank you!
I could find (not at all easy to find) a link in the Linksys forum, where the appropriate utility program was published by download.
http://forums.linksysbycisco.com/Linksys/board/message?board.ID=cameras&thread.ID=9041
This seems to access the camera via the net, using the TZO URL... Good stuff and thanks again.
Anthony
-
Hearing CC randomly loses functionlity record and playback
Any contributions to this issue would be great. I use Adobe Audition CC and after a few minutes reading and registration function lock. I am still able to edit and save as normal, but that's all. When I hit 'play' icon lights up as if it plays but does not move the playhead.
If I click and let the program a few minutes of running in the background, sometimes feature returns,.
So, I submitted a ticket with blue, the manufacturer of microphones and after a few emails back with them, it seems as if it was a question of power. the USB port that I had plugged in was not providing enough power to the yeti. I went to a different USB port and Bank and everything has been resolved. Thanks for all the help.
-
Busy mouses sign Blue Circle guard go every 3 seconds approximately.
Why my icon occupied by my Dungeon of mouse move even after everthing was loaded? G6t computer laptop HP pavilion Windows 7. It dawns on every 3 seconds or more. Just got the computer yesterday.
New Windows 7 PCs do a lot of cleaning the early days of functioning, post back if it does not back down after a few days to be in market.
-
Recording and audio playback problem
I have windows 7 and I have problems with the audio recording and playback. If I record something myself, or just play something on the internet, the "stretch" sound in places as the person talking is now on a particular letter; for example, they might say, "" Hi, theeeeeeeeeere. "» or "I'm nnnnnnnot a joke." How to return to nice, audio cleanup?
Hello
Welcome to the Microsoft Community Forum.
I understand that you have a problem with the playback of the sounds and audio recording in Windows 7. I appreciate your efforts to solve this problem, I'll probably help you with that.
To solve your problem, I'll give you some troubleshooting steps.
Method 1
Run the tool of Windows troubleshooting audio in your Windows 7.
See the following Microsoft Help article and run the Audio troubleshooter and check if it helps. This is a built-in convenience store that helps you solve common problems with Audio.
http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter
Method 2
Try installing the latest audio drivers and check if the problem persists. This is to check if the problem is caused due to not install the drivers the most recent or not.
http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN
You can also view the following Microsoft Help article below:
Try the above steps and get back to us if the problem persists.
Thank you
-
Computer hangs every 30 seconds in all programs
My computer freezes every 30 seconds. Sound stutters and hesitates the cursor. Freeze only lasts for 1 second, but this is very embarrassing. It happens in all programs and at all times. I have tried several programs fix - it as advanced system of cleaning and difficulty cleaning without result. I downloaded process Explorer and it shows my use of cpu amounting to a normal 7 to 20 percent when the stuttering occurs.
I have a Dell Studio XPS 9000
Intel Core i7-920 processor
8 mb L3 cache clocked at 2.66 ghz
8 GB SDRAM DDR3 at 1 066 mhz
ATI Radeon HD 4350 w / 512 MB
Windows 7 Home premium 64-bitThis started about 2 months ago and drives me crazy. Any help will be much appreciated. I really don't want to go through the trouble of reinstalling windows 7.
Original title: freeze momentary
Hello
Check with Support from Dell, their online documentation, drivers, diagnostics and ask questions in the forums on
known problems.Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/=========
Use the startup clean and other methods to try to determine the cause of and eliminate problems.
---------------------------------------------------------------
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista or
Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods
above is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
found)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
Ultimate and Enterprise)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
My screen every 15 seconds or so darkens and then returns to normal.
It isn't turned off, just cycles from normal to dark to normal.
Is this a sign that the monitor has failed, or is there a driver or?
When this condition even happened to me, I kept hoping that the monitor would return, and one day it didn't. End of the game...
Your monitor is a failure...
-
ULaw and alaw record and play G711
I want to be able to capture and play directly to the a - law and u - law format. I have read several posts on how to put the reader (capture in my case) in amr and pcm mode.
Capture of AMR and PCM is not a problem, but the correct string of capture to capture the u - law data is unknown to me.
for the record:
capture://audio? Encoding = PCM works, also tried something like:
capture://audio? Encoding = PCMU (does not), also tried to replace with pcmu, ulaw, audio/x-ulaw
capture://audio? Encoding = AMR (works)
When I exit the capture I get supported types:
Device supports capture Type: audio / amr
Device supports capture Type: audio / basic
Device supports capture Type: audio / x - gsm
Device supports capture Type: image / jpegTo play, I think that I should put the x - wav player and provide good wav header, will try later, but my first concern registers directly as G711.
I'm running on Simulator and device (BB Torch v6) which should be able to support the u-law/a-law.
someone at - there more information on this? It is not possible or should I put the recorder in pcm mode and convert my data on the fly?
Hi James!
Registration is only linear PCM. The reading can be linear, G711 uLaw and alaw for PCM. On a BlackBerry audio/basic = audio/pcm.
If you are interested, GSM is GSM6.10 of recording and playback, AMR's locker AMR - NB 12.2 Kb/s (unless you specify voipMode = true in your locator, but I will not go into these details, you can search the forums if you need more information on this) and any mode of AMR - NB valid for playback (only three units I know can also playback AMR - WB and AMR - WB +).
Finally, to save some time there is code attached to this question (if you can connect, related to this thread) who has code to generate headers wav on the Blackberry platform for you.
-
Peripheral Audio USB-Mulit-channel has a driver problem and PnP device problem.
I try to use the blue ice pre - amp for recording. Under channel-Mulit-USB Audio Device, device status, it displays "this device cannot start. (Code 10) "once I start the troubleshooting process it shows that even after reinstalling the driver it still does not work and that there is a problem with the device PnP I already tried to uninstall the driver and restart my laptop to let windows try again but nothing works. Please help D:! Thank you all very much! :]
-KyleHello
1. is this problem limited with a specific USB device?
2. it worked before?
3. using this unit for the first time on this computer?
4. the other USB devices work properly?
Method 1: Run the troubleshooter and see if it helps.
Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2:
The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues. You may need to update the chipset drivers and the USB controller
Follow the given article below for more information.
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104
In addition, update the driver from the manufacturer's Web site and see if it helps.
Method 3: Uninstall and reinstall the USB drivers and check if the problem persists
1 disconnect all USB devices except the USB keyboard and mouse.
2. click on start and type device manager in the start search box and press ENTER.3. Select the Device Manager and a pop-up window will Device Manager.4. click the + on controllers USB Bus to develop it.5. right click on all controllers USB and USB Root Hub that is listed, and select uninstall.6. restart the computer.7. plug in the appliance and check if it works.I hope this helps. -
Record and play variable a string will not copy
I have a variable of string - serialization of an xml variable result - in a process.
It has a length of 'unlimited '.
When I opened the recording and playback, there is text indicating the beginning of sequenced xml:
< node_x
That's all that I can see.
Unfortunately, the option 'copy value' in the menu contextual is dimmed, just at the moment where I most need!
This is normal behavior for a scenario like this?
Is there anyway that I can get to copy...
Thanks in advance!
At least try to open and close the variable perspective.
-
When streaming audio via the audio interface USB 2.0 Audio Class Compliant on Windows 7 Professional 64 bit update, there's regular CPU usage spikes up to 100% every 15 seconds, sometimes amounting to audio dropouts. Utility LatencyMon v6.5 reports that huge amount of CPU time is spent inside the usbport.sys driver whenever there are any audio stream of isochronous USB happening. I know that there is a supposed to be available to target exactly this problem - https://support.microsoft.com/en-us/kb/981214 fix - but the fix refuses to install, probably because the fix itself is quite old and does not seem to recognize the latest versions of the drivers usb*.sys on any instance to date of Windows 7.
I have tested and confirmed this problem on two different mobile-class workstation laptops from different manufacturers, both based on Intel 7 series / C216 QM77 chipset (Panther Point) and using the integrated chipset USB host controllers to connect to the audio interface (a 18i20 of Focusrite Scarlett). One of the laptops has EHCI and controllers xHCI routed to different physical ports, the other laptop has all the physical ports connected to xHCI; It might be interesting to note that the problem seems identical to the audio interface is connected to EHCI or xHCI. All other possible causes that usbport.sys were eliminated by a careful configuration and the measure, i.e. There is no limitation, no turbo CPU, no CPU C-State, not of processor HyperThreading, no food, no virtual memory paging management event, not even any SMI (System Management interrupt) passes, everything boils down to usbport.sys hogging the CPU.
It would also be interesting to note that according to Intel, there are a bunch of bugs known to host USB controller Series 7 / C216 chipsets, one can find an Errata section detailed from page 15 of the document Spec update - http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/7-series-chipset-pch-spec-update.pdf
Could this problem hogging CPU actually come from bugs in the hardware host controller USB drive operating system driver nuts? Or it comes from a bug unrelated in the OS driver? And what happened to the existing of the fix, why he refuses to install the operating system to date and how is the same old problem suddenly reappeared on automatically updating Windows 7 systems?
It is in any event, that my most sincere and humblest hold like a paying customer for a hotfix update fix this if possible, one that is truly committed to settle. Without corrective work, Windows 7 machines are quite useless for all serious audio work. I also feel that I speak not only for me but for all members of the global computer audio community who are trying to use Windows 7 with audio USB.
Just upgraded my Windows 7 Professional for Windows 10 Pro and the issue hogging CPU is now gone - no pics no CPU more, more dropouts no audio USB. (It would still be nice to have a fix for Windows 7 someday, too)
Maybe you are looking for
-
How to download free microsoft office in my iMac
Please can someone tell me how to download free Microsoft office on my iMac?
-
MacBook Pro OSX Yosemite 10.10.5 retina kernel panic
Last month, I had about 6 random system with a kernel panic failure, which happened while I was using internet (Firefox). I've had this computer for over a year now, wand I never had this problem before this month. This is the latest report: Journal
-
Re: roll-back of firmware 32L2333DG
After the successful update firmware to the most recent (at this time) 1.05.05 for this model (http://www.dl.toshiba.com/dtv/NA/GB/EN/32L2333DG.html), there is a problem: There is nothing listed on the EPG Guide of the 8-day program on all the availa
-
Tecra M5 (PTM51E) - I need a compatible adapter
Can someone suggest an appropriate adapter to use with this laptop? I had a look at the Toshiba Notbook car adapters available: -.Part number: PX1237E-1NPO &Part number: PX1323E-1NPO But neither have the M5 in their portable tables compatible. I have
-
Hi guys,. I need a little help on this program, I write. Its a program dual channel. I want to be able to read 2 mydaq channels. I don't know why he can't show us the waveform and is unable to continue running. Thank you!