Not a valid Win32 - vCenter server application install on W2K3

Similar Questions

• In the face of error "%1 is not a valid Win32 application. (0x800700C1)"in windows server 2012 R2 while running the windows schedule

  Dear team,

  In the planning of windows since windows machine run R2 server 2012 am facing the following error.

  "%1 is not a valid Win32 application. (0x800700C1).

  We have set up the automatic backup for our Desigo insightV5.1SP2 application calendar.

  Thanks for supporting.

  Regarding

  Athi

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• TurboTax cd installation problem... Error message States "D:\setup.exe is not a valid Win32 application"... What is the solution to allow me to install my TurboTax program?

  Error message States "D:\setup.exe is not a valid Win32 application"... What is the solution to allow me to install my TurboTax program?

  Maybe a cd damaged?

  Hello

  ·         What is the service pack installed on your computer?

  There are changes that the CD is damaged. You can copy the file to install it on the computer and then try to install the application, and check.

  To install TurboTax, the condition of basic system for Windows is:

  Minimum system requirements

  Processor: 1 GHz 32-bit (x 86) or faster processor

  Operating systems:

  Windows XP (32-bit) Home edition or professional with Service Pack 3 or higher; or

  Windows Vista (32 - bit and 64 - bit) Home Basic/Home Premium/Professional/ultimate; or

  Windows 7 (32-bit and 64-bit).

  Administrator rights required to install and use TurboTax.

  RAM: 512 MB RAM (1 GB recommended)

  Hard drive space *.

  * Must be on the same drive that TurboTax is installed on

  ·         Federal products: 500 MB for TurboTax (plus up to 1.5 GB for Microsoft .NET 4 if not already installed)

  ·         Products from the States: 15 MB

  ·         Federal more State products: 515 MB for TurboTax (plus up to 1.5 GB for Microsoft .NET 4 if not already installed)

  Reader of CD-ROM: 2 X CD-ROM drive

  Monitor: recommended 800 × 600 resolution (1024 × 768) screen

  Internet access (required):

  Modem 56 Kbps (connection broadband recommended)

  Other software:

  ·         Microsoft .NET 4 (included with TurboTax Installer)

  ·         Adobe Reader 8 +.

  Printer: Windows compatible ink jet or laser printer

  Hope this information is useful.

• Cannot install windows live messenger, wlsetup is not a valid win32 application or wlsetup is obsolete!

  I tried to download windows live messenger after a new new copy of windows xp.
  I received the following error message (wlsetup is not a valid win32 application), I realized the the version I'm trying to install is only supported by windows 7 or windows vista. So I tried to download windows live install for xp, but I received the following error message (use windows update to download the latest version of windows install, then try again.) Your version of windows install is obsolete. MSI audit: 0 x 80280002). Now I'm stuck!
  I couldn't find a soluton in the forums of Windows live.
  Any help would be appreciated.

  Windows install is what is used to install programs. Have you checked if there is an update as they said and you have the latest Service Pack?

  You can answer these questions then try this:

  1. go to this site - http://ninite.com/
  2. scroll down a bit to mail and put a check mark on Messenger (2009).
  3. scroll to the bottom of the page, and then click Get Installer.
  4 run.

• try to install windows live gives the error: [2] wlsetup-web .exe is not a valid Win32 application

  Help! get this message when I try to download windows live

  Does anyone know how to fix this, so that I can download windows live.  This is the error message I get.  C:\Documents and Settings\Beverly\local Settings\Temporary Internet Files\Content.IES\Z2VARPB8\wlsetup-web[2].exe is not a valid Win32 application.

  Hello
   
  1. are you able to download and install other programs?
  2. what browser do you use?
   
  Remove all files in the Temporary Internet Files folder and try to re - upload and check.
  C:\Documents and Settings\Beverly\local Settings\Temporary Internet Files\
   
  Also delete temporary internet files from the browser.
  Delete temporary Internet files
  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-temporary-Internet-files (this section applies to internet explore 7 & 8)

  Contact team for software issues with windows live windows live support.

• Error - Lifecam3.60.exe is not a valid Win32 application. Failed to install the software for Microsoft VX5000 webcam.

  Original title: impossible to install the software for vx5000 webcam.

  I tried to download with Firefox; the first time it shut down my computer, the second time, he showed, it was the download of files, but after an hour more, I let down, then switch to IE.

  I tried to install Microsoft vx5000 webcam software in win xp.  has no charge. I then downloaded last update 3.6 Lifecam and I get the message "Lifecam3.60.exe is not a valid Win32 application.   What to do next?

  Hi golferfrankholeinone,

  You can follow this link and check if it helps.

  Troubleshooting, install the Intellipoint or IntelliType software, LifeCam.

  Hope the helps of information.

  Please post back and we do know.

• E:\ setup.exe is not a valid win32 application when tring to install Expression Studio 4 upgrade

  Very simply whenever I try to install the upgrade, I get this messgae

  E:\ setup.exe is not a valid win32 application

  What should I do?  I've tried everything.  I need help

  Hi hshensley,

  I suggest disbling temporarily your antivirus program to see if you are able to install the program:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install hp officejet pro 8500 A909a printer using a disc. Get error "error-windows 7. hta is not a valid win32 application".

  Receive this consignment of error when you try to use a CD-ROM to start re - install hp officejet pro 8500 A909a printer.

  Error-windows 7. hta is not a valid win32 application.
  Help, please
   
  Original title: 64-bit Windows 7 pofessional

  Hello

  1 are you getting this error when trying to install the drivers for the printer from the CD?

  2. what exactly is the problem that you are facing with the printer?

  This problem may occur if the files on the CD are corrupt. You can download the current "Full Feature" software and drivers from the HP Web site at: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=3752456&

  You can also contact the HP support forum to get help:

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=3752456

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Cannot install the FSX SP1: C:\Users\Home\Downloads\fsx_sp1_ENU.exe is not a valid Win32 application

  I want to install SP1 for FSX, but it says this

  (C:\Users\Home\Downloads\fsx_sp1_ENU.exe is not a valid Win32 application)

  What should I do to install it?

  Hi JohnKegaly,

  You can try the steps in the KB article and check below if you can install the FSX SP1.

  Games: Error Message: not a Win32 Application invalid

  http://support.Microsoft.com/kb/315589

  Note: This also applies to Windows 7.

  See the link to download the FSX SP1:

  FSX SP1 English

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a0437942-e3dc-4aa7-85dc-90aae2f0409e&displaylang=en

  Hope this information is useful.

• Have windows 7 installed and office 2007. Cannot open the old excel files. Error reading .xlsx is not a valid Win32 application

  Have a new laptop with Windows 7. Responsible for Office 2007. Cannot open the old Excel files. Get the error reading .xlsx is not a valid Win32 application when I try to open the file.

  Right-click on the Xlsx file and select open with.  Then find Excel and make sure that it is selected to always open with this program.  Click OK, and then see if it works

• Try to install acrobat standard dc get message not a valid win32 application

  just purchased adobe acrobat standard dc download but got the message that acrobat_2015_web_WWMUI.exe is not a valid Win32 application.  say Windows 7 32-bit is acceptable? Suggestions?

  You may download 64-bit by mistake (if there IS a 64-bit version?)

• Portege BIOS 6.40 PT235E Z930 is not a valid Win32 application

  Try installing the latest BIOS 6, 40-VICTORY for my Z930 PT235E under W7-64 (http://support1.toshiba-tro.de/tedd-files2/0/bios-20121105095556.zip) I get the error message: "BIOS_V640_EC120_WIN.exe is not a valid Win32 application".

  I tried several options to obtain the file from a different download server, but it seems that Toshiba has downloaded a corrupted file (the file size is only 107 kb)

  any advice/help home

  concerning
  Peter

  It seems that the file is corrupted
  If all goes well he will be replaced in the next few
  Recommend that you check the update of the BIOS in the next time.

• Error message received: File\content. IES\XRUUQGC\file[1].exe is not a valid win32 application

  As he tried to improve the overall performance of the laptop of my daughter, I received the following message when I try to download security/antivirus software: File\content C:\User\Haley\AppData\Local\Microsoft\Windows\TemporaryInternet (2ndLine) (1stLine). IES\XRUUQGC\file[1].exe is not a valid win32 application

  It's a Dell Studio laptop running Vista.

  Does anyone know what this message and what I need to do to fix?

  Thank you in advance for your help! Darlene

  It is always sensible in this situation to achieve a malware check

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.precisesecurity.com/how-to/HT-smodewnet.htm
  http://www.Malwarebytes.org/products/malwarebytes_free

  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

  Some malware is installing the entries of proxy server redirecting internet connections. If you encounter this problem step 2 see in the following link:
  http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/

  Currently, this is a good combination that seems to detect more malware, but it can miss the malware as all security software can do.

• Satellite A300-1BZ: %1 is not a valid win32 application after change of themes

  Having had my Satellite A300-1BZ for a couple of years now, I found myself suddenly bored standard vista themes and started playing with change them. (I was after a ultimate black watch with change start menu and buttons etc.)

  In any case cut to the Chase, I went wrong somewhere with VistaGlazz through to replace something like shell32.dll
  As it said in the readme file I changed it to shell32.dll.bak

  My computer has continued to run fine until I ran a reboot. After that, I got after the log on screen was a blue screen with a mouse.

  http://i69.Photobucket.com/albums/i53/eazynowrudeboy/IMG000030.jpg

  Luckilly I have an iphone so managed to get on internet forums and find a solution which was to use a command in cmd.exe that fixed the problem.

  The only thing is now that I have a very basic windows Classic theme that when I try to change to Vista in the theme settings it gives the message:
  * "the theme could not load. %1 is not a valid win32 application. "

  Any help and step by step for the user base would be much appreciated! I guess it can't be that bad since Windows is still running and working properly!

  Thank you

  Hi tarmacsnortingmonster,

  That is the reason why I n t play with any 3rd themes part because I always read from time to time on various problems after installation. So I don't use Windows themes pre-installed and don t have problems.

  In any case, I think you should try a system restore to an earlier point before installing this theme.
  I hope this helps if not it is time to reinstall Windows, I think that :(

• Fallout trilogy > problem download > Fallout (E :) > E: / is not a valid Win32 Application.)

  I just got the trilogy Fallout game for Christmas. I was downloading on my Windows XP laptop. I jumped the drive and nothing happened. I checked the computer room to look for the removable disk, I found Fallout (E :) and clicked on it, it normally start the Setup and let the installation program to download, then install, so allow me to play the game.)

  But when I clicked on what came was "E: / is not a valid Win32 Application."

  I assume that Win32 is Windows XP? And on the game, it says it requires OS: Win90/2000/XP with DirectX 7.0 or later/Vista version.

  I just got my laptop completely wipe clean and load Windows XP on it to him. He used to have Windows Vista Home Basic, the Fallout 1 game, I used to have downloaded without problem. Fallout trilogy has 1 Fallout, Fallout 2 and Fallout Tactics: Brotherhood of Steel.

  If you can please tell me how I can download this soon so I can play the game, I'm pretty frustrated and upset because my cousin has spent hours looking for this game, and it was the last available at the 5th GameStop he went to.

  Hello

  Here is some information that may be beneficial to get a resolution to your inquiry.

  If you had installed Fallout3 mode "Run As Amin" and will still have problems.  Uninstallation of Fallout 3.  Install the following Microsoft DirectXhttp://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=2da43d38-db71-4c1b-bc6a-9b6652cd92a3 and that reinstall Fallout 3, mode 'run as administrator '.

  Do not install the latest patch yet.  Run Fallout3.  If it works well, do a system restore point.  Then install the latest patch.

  In addition, when a right click on the .exe file, it should be a 'compatibility' tab, if necessary, please try to install the .exe file in Windows XP SP2.  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think