Not able to burn the files to the disk after formatting CD

Similar Questions

• Windows Media Player not able to burn the 80 minutes of audio

  MEDIA PLAYER NOT ABLE TO BURN THE 80 MINUTES OF AUDIO ON CD.

  I want to burn a 77-minute cd in media player and can not.   I add a playlist to the burnlist and Monte total autonomy than 77 minutes.  I use a 80 minute cd.  Media player automatically moves the last two songs on my playlist of 77 minutes and registered the disk "next".  I want to record the 77 minutes of music on a single cd.  Any suggestions?

  flustrated1, you use Windows Media Player to burn a CD, and if so, what is your WMP version? Where exactly did you select CD burning without gaps ? As far as I know, only WMP 12 supports CD burning. Tim Baets
  http://www.BM-productions.TK

• Not able to print the message after redirection to another page of pag current

  Hi Experts,
  
  I'll call you a procedure (who accepts 4 parameters IN) page of the OAF by pressing a button.
  
  My page contains: 4 elements of text Message and the other present button.
  
  I enter values in the 4 message text of introduction of the elements; After clicking on the button submit, he calls with success the procedure.*After by clicking on the button submit, after the call to procedure, I would like to pass on the same page with the values parameter zero and display confirmation message *.
  
  But I am not able to make the parameter null values in the page.
  
  
  I have the code in my page controller below.
  
  REQUEST FORM PROCESS:
  
  OAApplicationModule oa = pageContext.getApplicationModule (webBean);
  
  
  {if (PageContext.GetParameter ("Submit")! = null)}
  CallableStatement call_proc = null;
  try {}
  call_proc = OA.getOADBTransaction () .createCallableStatement ("start oaf_test_tbl_insert_proc(:1,:2,:3,:4,:5); end; ", 5) ;
  call_proc. SetString (1, PageContext.GetParameter ("empno"));
  call_proc. SetString (2, PageContext.GetParameter ("Ename"));
  call_proc. SetString (3, PageContext.GetParameter ('Work'));
  call_proc. SetString (4, PageContext.GetParameter ("Salary"));
  call_proc.registerOutParameter(5,types.varchar);
  call_proc. Execute();
  oa.getOADBTransaction () .commit ();
  
  String message = call_proc.getString (5); out parameter (5) will return a message
  
  
  OAException message = new OAException (message, OAException.CONFIRMATION);
  pageContext.putDialogMessage (message);
  
  pageContext.forwardImmediately ("OA.jsp?page=/practice_test_prc1/oracle/apps/mfg/simplepg/webui/oaf_test_tbl_calling_proc"
  null
  OAWebBeanConstants.KEEP_MENU_CONTEXT
  null
  null
  true
  (null);
  
  } catch (SQLException e) {}
  call_proc. Close();
  }
  
  }
  
  
  Kindly help me, how to print the confirmation message and send to the same page by making the param to null values.

  Hello

  On the successful return of the procedure, you must set a session Variable * (pageContext.putSessionValue ("WFFullListPage") *.)

  Then call it.
  

  pageContext.forwardImmediately ("OA.jsp?page=/practice_test_prc1/oracle/apps/mfg/simplepg/webui/oaf_test_tbl_calling_proc"
  null
  OAWebBeanConstants.KEEP_MENU_CONTEXT
  null
  null
  true
  (null);

  Next, you need to check this condition on the PR of the CO and show the message as required.

  Extract the same value to the controller, as * (pageContext.getSessionValue ("WFFullListPage") *)

  Kind regards
  GYAN

• Re: Satellite Pro A300 - not able to burn the DVD

  I am able to read a cd, I am able to record on a cd, I can read a DVD but I'm not able to record to a DVD.

  The device driver is TS-L632H - it says on the side of the DVD Player Recorder DVDs, DVD RW rewritable multi.
  I tried updating the driver but it says that it is up-to-date.

  I am trying to record to DVD RW 16 x memorex. The regional setting is correct.

  Evidence Wally assistance would be much appreciated.

  Have you tried to burn various DVDs from different manufacturers?
  No, this!

  I couldn't t burn various DVDs until I tested the TDK DVD-R my burner drives agreed this drive and I was able to burn successfully.

  Check it out!

• Not able to burn the disc

  Windows media player

  I have Window Media Player 11 running on my laptop with Microsoft Vista Home Premium and when you try to burn discs now, it says that there is some type of problem. I use the same method that I've always used without any problems then why is there a problem now? Y at - it a type of update or anything else I can do? Help, please.

  Hello SeccoyyaSmith,

  1. What is the error message you get when you try to burn a CD on the computer?

  2. are you able to burn discs in Windows Explorer?

  I suggest you follow the link below and run the fix it will automatically correct problems related to burning discs;

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• Not able to tnsping the db after the installation of the db instance

  Hi friends,
  
  I do a test setup of Siebel servers under Linux. To do this, I had installed Oracle 11 g 2 x 64 db OEL 5.4 x 64, and created a db instance 'oracle '.
  But I am not able to tnsping to db (installed on the same computer).
  
  
  PSB o/p...
  
  
  [oracle@localhost ~] $ source oraenv
  ORACLE_SID = [oracle]?
  The basic Oracle for ORACLE_HOME=/home/oracle/app/oracle/product/11.2.0/dbhome_1 is/home/oracle/app/oracle
  [oracle@localhost ~] $
  [oracle@localhost ~] $
  [oracle@localhost ~] $ echo $ORACLE_HOME
  /Home/Oracle/app/Oracle/product/11.2.0/dbhome_1
  [oracle@localhost ~] $ echo $ORACLE_SID
  Oracle
  [oracle@localhost ~] $ sqlplus / as sysdba
  
  SQL * more: Production of release 11.2.0.1.0 Thu Sep 27 09:37:57 2012
  
  Copyright (c) 1982, 2009, Oracle. All rights reserved.
  
  Connect to an instance is idle.
  
  SQL > exit
  Disconnected
  [oracle@localhost ~] status oracle $ lsnrctl
  
  LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 27-SEP-2012 09:38:29
  
  Copyright (c) 1991, 2009, Oracle. All rights reserved.
  
  AMT-01101: could not find oracle service name
  [oracle@localhost ~] oracle tnsping $
  
  AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on 27-SEP-2012 09:39:03
  
  Copyright (c) 1997, 2009, Oracle. All rights reserved.
  
  Use settings files:
  
  AMT-03505: failed to resolve the name
  [oracle@localhost ~] $
  [oracle@localhost ~] lsnrctl start $
  
  LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 27-SEP-2012 09:40:50
  
  Copyright (c) 1991, 2009, Oracle. All rights reserved.
  
  From /home/oracle/app/oracle/product/11.2.0/dbhome_1/bin/tnslsnr: Please wait...
  
  TNSLSNR for Linux: Version 11.2.0.1.0 - Production
  Log messages written to /home/oracle/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=localhost.localdomain) (PORT = 1521)))
  
  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
  Start date 27 - SEP - 2012 09:40:50
  Uptime 0 days 0 h 0 min 0 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  The listener log file /home/Oracle/app/Oracle/diag/tnslsnr/localhost/listener/alert/log.XML
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=localhost.localdomain) (PORT = 1521)))
  The listener supports no services
  The command completed successfully
  [oracle@localhost ~] $
  
  
  
  Had started to the top of the db successfully by using the 'start' command in the sql prompt.
  Please help me to solve this
  
  Kind regards
  Hari

  The tnsnames.ora file exists in the location $ORACLE_HOME/network/admin?

  If exists, then please send its content, otherwise create it using NETCA

• HP recovery mananger-is not able to launch the disk for the recovery partition check, why?

  Hello HP,.

  I had a problem with my hard drive. HP send me a new.

  I copy all the information for the new hard drive recovery, but I think that hp, Manager of recovery do not recognize the recovery partition.

  can you help me please?

  I was able to do the recovery from the computer disks in a safe mode. now I'm restoration of original image.

  just in case I can help someone.

• VCB fails with info ' was not able to export the disk: operation has been cancelled ".

  Hi gurus,

  I'm the VCB scene on a virtual machine. It worked fine until three days ago.

  But now fails with a general error, which is not what is happening.

  _______________________________________________________________________________

  ...

  finished... 26%

  finished... 28%

  finished... 30%

  finished... 32%

  finished... 34%

  finished... 36%

  finished... 38%

  finished... 40%

  finished... 42%

  finished... 44%

  finished... 46%

  finished... 48%

  finished... 50%

  finished... 52%

  2009-05-30 23:11:00.756 error 'App' 3800] cancellation, please wait...

  Cancellation, please wait...

  Cancellation, please wait...

  Cancellation, please wait...

  Cancellation, please wait...

  Cancellation, please wait...

  ************************

  Error: Cannot export the disk: operation has been cancelled

  An error has occurred, cleaning...

  Deleted directory T:\mnt\spimppd

  VM error: snapshot 'spimppd' failed

  ___________________________________________________________________________________________

  I searched a bit on newspapers and found these lines on him pass - 0.log in/var/log/vmware.

  _____________________________________________________________________________________________

  Red list received destroy application for lease 528360da-d8ed-6fb8-$

  Destruction of session 529e1477-2214-3ca1-d0cc-d569257a1ff1

  Destructor called lease 528360da-d8ed-6fb8-41b5-fe2c7682c44b

  DISKLIB-VMFS: ' / vmfs/volumes/49c5203c-cf8fa2fc-6729-$001f295db569/spimppd ".

  List of block request received for the snapshot/vmfs/volumes/49c5203c-$

  DISKLIB-VMFS: ' / vmfs/volumes/49c5203c-cf8fa2fc-6729-$001f295db569/spimpp ".

  DISKLIB-DSCPTR: open : 'spimppd_3 - flat hard' (0xe)

  DISKLIB-LINK: open ' / vmfs/volumes/49c5203c-cf8fa2fc-6729-$001f295db56

  DISKLIB-LIB: open ' / vmfs/volumes/49c5203c-cf8fa2fc-6729-$001f295db56 ".

  Built block with 3 entries list.

  ___________________________________________________________________________________________________

  Can someone help me?

  Thank you.

  so you think that all this could have been a problem of space available?

  Could be the more realistic reason.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Windows Movie Maker, not able to burn the movie to a DVD

  Director of Windows & dvd creation

  DVD won't burn spent 71%

  DVD won't burn spent 71%

  1. is the format of your video clip supported by Windows?
  Here's the vdieo formats supported by Windows:
  Video files: .asf, .avi, .dvr-ms, .m1v, .mp2, .mp2v, .mpe, .mpeg, .mpg, .mpv2, .wm, and .wmv

  2. how long is the video clip? If it is too long, it would be more easy to use Movie Maker to split the clip into smaller clips, publish them, and then try to burn them in several DVDs. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Not able to burn audio files to disk

  Record music with WMP 11

  I signed up for a trial with Kazaa and it seems fair to let me play music and not burn! Someone knows a way around this? I have converters and editors! That's why I always use torrents instead of A Windows or Itune company! But free trials are difficult for me to resist! I would like to find a way to download and record music from a site that is free! Seems to have no problem with movies! The method of bit-torrent is so long and I would like to speed this up! Any suggestions?

  What exactly happens when you try to burn music? I suspect that the songs downloaded from Kazaa are protected by DRM, which does not burn them on CD. Tim Baets
  http://www.BM-productions.TK

• Virtual machines are not able to access the network after you have moved the host

  We moved our 4 ESX host to a different physical switch and now our VMs cannot access the network.

  I can access the host via client vsphere.  Our host has 2 network cards.  They are both members of the vSwitch0.  I have 1 VM network defined, and they are both members of it.  The network adapters, vmnic0 and vmnic1 are also part of my VMkernel which I do not know that I need because I have 1 ESX Server and do not use iscsi or NFS.

  the two cards are also part of my service console.

  According to my host "configuration / display: vitual switch, it looks like all my virtual machines are defined to use the vswitch."

  the two physical network adapters is connected to the same switch.  I did not go to any configuration on the switch.

  

  The steers would be appreciated.

  Thank you

  Paul

  

  Welcome to the community,

  It sounds as if the physical switch ports are not configured correctly. Please check that port security is disabled on the switch (switchport mode access) ports and spanning tree portfast is (if any).

  André

• not able to remove the applications after the update iOS 10 or 10.0.2

  Always impossible to remove apps after IOS 10.0.2 update/fix. Can remove storage iCloud however.

  Have you tried a reboot of the device or a reboot of the force?

  Restart your iPhone, iPad or iPod touch - Apple Support

• I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web.

  I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web. Please, let me know how can I use this font for my project.

  Thank you

  Anton

  Unless the site you develop is for the Asian market, I don't know why you want to use that particular font. The Basic, standard and digital alphabet punctuation glyphs has sans serif, Roman characters, but the rest is thousands of Kanji characters. While you can use the font .ttf and .otf and web fonts, it would be very unusual to use one so great. Pages should load quickly and 78 MB, with a value of faces to download for those who have connections slow Internet is not fast.

  I would take a different font without serifs. There are literally thousands who look identical or virtually identical to Yuanti.

  131 free and high quality without font serif to choose here. I'm sure you can find a desired.

• Not able to view the files in Windows XP after installing Ubuntu 10.10.

  Original title: problem opening of windows.

  I installed ubuntu 10.10 on my system unfortunately it took total hard drive in a single partition and now I am not able to access microsoft windows. What to do there are a lot of important files in that partition. I am not able to view the files that have been seen in windows. Please suggest.
  concerning
  Hari

  Hi hari,.

  It seems that Ubuntu has supported the installation of Windows. At this point, I would recommend youto contact support Ubuntu uninstall Ubuntu. This should return Windows XP & you can access your files.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Not able to see the images in the Windows Vista Help file

  I use a Windows Vista operating system and I'm not able to view the images in the Windows Vista Help file... ! Here are the troubleshooting steps I tried to solve the problem:-

  1. I tried sfc/scannow and chkdski/f/r.
  2. Tried to clean boot.
  3. Tried to create a new user account.
  4. Tried in safe mode.
  5. Downloaded and installed the WinHlp32.exe file from http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=5143
  6. Tried running the http://blogs.msdn.com/b/astebner/archive/2006/09/04/739820.aspx SubinACL tool
  7. I tried Startup Repair tool.

  Could you please temme then what to do? I look forward to hearing from you soon.

  Hello
  Try this for this issue:
  Equip your Windows recovery disk, then select "Reinstall partial '.»
  Check the "Winhelp" since the consolidation of program.
  Next
  Finishing
  Then restart.
  Which solves the problem?
  hope this helps,
  b Eddie