Not able to tnsping the db after the installation of the db instance

Similar Questions

• Not able to access the parent instance variable in outside of the methods in child

  Hello
  
  I don't get why I am not able to access the instance variable parent class apart from the example of the child class methods.
  

  class Parent
  {
       int a;
  }
  
  class Child extends Parent
  {
       a = 1; // Here i am getting a compilation error that Syntax error on token "a", VariableDeclaratorId expected after this token
       
       void someMethod()
       {
            a = 1;  // Here i am not getting any compilation error while accessing parent class variable
       }
  }

  Can someone let me know the exact reason for this, and what about the talks of error?
  
  Thank you
  Uday
  
  Published by: Udaya Shankara Gandhi on June 13, 2012 03:30

  You can only put assignments or expressions inside the methods, of the builders or the initializors class, or when you declare a variable.
  It has nothing to the child which stretches from Parent.

  class Parent {
      int a = 1;
  
      { a = 1; }
  
      public Parent() {
          a = 1;
      }
  
     public void method() {
         a = 1;
     }
  }
  

• I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

  Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

  I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

  I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

  Any help would be welcome.

  Thank you!

  So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

  Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

  Adobe Lightroom - find moved or missing folders and files

• could not able to open the repository in online mode after changing

  Hi friends,
  
  Currently, I open a file of RPD called SH in online mode... Since Inorder for it to open, I made the following changes in the configuration file of TNA , and also in instanceconfig.xml file...
  
  Shortly after this change after giving a user name and password of the RPD SH file I opened the repository of the HS in online mode...
  
  And also if I give the username and the password of RPD HS in presentation services I can able to connect to the BI responses to view reports of SH...
  
  Now I have to open another file such as APP.rpd RPD, before I edited in the configuration file of TNA as well as in the instanceconfig.xml file...
  
  After that, change if I give the respective user name and the password of the average APP RPD file, it is not to open the repository in online mode...
  
  He throws the error as
  
  nqserror: 37001 couldnot connect to the instance of oracle BI server
  nqserror: 43001 authentication failed for Star repository administrator: username/password invalid
  
  Since the error trying to tell that the user name and password is incorrect for the file APP.rpd...
  
  But if I tried to open the APP.rpd file in offline mode means, is opened giving the username and password of it... But in online mode, why he does not accept the same user name and password...
  
  Because the APP.rpd does not open in online mode, I could not able to open the presentation...
  
  How do I open the APP.rpd instead of SH
  
  What may be the problem...
  
  Help me friends,
  
  GTA...

  Hi, GTA,

  Did you reboot of Oracle BI Server?

  Thank you.

  Daan Bakboord
  http://obibb.WordPress.com

• Not able to print the message after redirection to another page of pag current

  Hi Experts,
  
  I'll call you a procedure (who accepts 4 parameters IN) page of the OAF by pressing a button.
  
  My page contains: 4 elements of text Message and the other present button.
  
  I enter values in the 4 message text of introduction of the elements; After clicking on the button submit, he calls with success the procedure.*After by clicking on the button submit, after the call to procedure, I would like to pass on the same page with the values parameter zero and display confirmation message *.
  
  But I am not able to make the parameter null values in the page.
  
  
  I have the code in my page controller below.
  
  REQUEST FORM PROCESS:
  
  OAApplicationModule oa = pageContext.getApplicationModule (webBean);
  
  
  {if (PageContext.GetParameter ("Submit")! = null)}
  CallableStatement call_proc = null;
  try {}
  call_proc = OA.getOADBTransaction () .createCallableStatement ("start oaf_test_tbl_insert_proc(:1,:2,:3,:4,:5); end; ", 5) ;
  call_proc. SetString (1, PageContext.GetParameter ("empno"));
  call_proc. SetString (2, PageContext.GetParameter ("Ename"));
  call_proc. SetString (3, PageContext.GetParameter ('Work'));
  call_proc. SetString (4, PageContext.GetParameter ("Salary"));
  call_proc.registerOutParameter(5,types.varchar);
  call_proc. Execute();
  oa.getOADBTransaction () .commit ();
  
  String message = call_proc.getString (5); out parameter (5) will return a message
  
  
  OAException message = new OAException (message, OAException.CONFIRMATION);
  pageContext.putDialogMessage (message);
  
  pageContext.forwardImmediately ("OA.jsp?page=/practice_test_prc1/oracle/apps/mfg/simplepg/webui/oaf_test_tbl_calling_proc"
  null
  OAWebBeanConstants.KEEP_MENU_CONTEXT
  null
  null
  true
  (null);
  
  } catch (SQLException e) {}
  call_proc. Close();
  }
  
  }
  
  
  Kindly help me, how to print the confirmation message and send to the same page by making the param to null values.

  Hello

  On the successful return of the procedure, you must set a session Variable * (pageContext.putSessionValue ("WFFullListPage") *.)

  Then call it.
  

  pageContext.forwardImmediately ("OA.jsp?page=/practice_test_prc1/oracle/apps/mfg/simplepg/webui/oaf_test_tbl_calling_proc"
  null
  OAWebBeanConstants.KEEP_MENU_CONTEXT
  null
  null
  true
  (null);

  Next, you need to check this condition on the PR of the CO and show the message as required.

  Extract the same value to the controller, as * (pageContext.getSessionValue ("WFFullListPage") *)

  Kind regards
  GYAN

• Not able to view the files in Windows XP after installing Ubuntu 10.10.

  Original title: problem opening of windows.

  I installed ubuntu 10.10 on my system unfortunately it took total hard drive in a single partition and now I am not able to access microsoft windows. What to do there are a lot of important files in that partition. I am not able to view the files that have been seen in windows. Please suggest.
  concerning
  Hari

  Hi hari,.

  It seems that Ubuntu has supported the installation of Windows. At this point, I would recommend youto contact support Ubuntu uninstall Ubuntu. This should return Windows XP & you can access your files.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Wil Windows 7 does not start and is not able to solve the problem

  Hello

  I tried several things at this stage. I have a Toshiba that windows is not able to solve the problem on its own when starting. InsydeH20 BIOS, I have ensured that the system must start using the HARD disc as shown.

  When the problem started he said that the problem could have been caused due to a media device may have been connected to the computer and that Windows could not fix the problem automatically. I was then able to enter the menu to try to do a system restore; It did not work. From that moment, I opened windows to use the F8 key and was able to start using the corrupted files, but now after a update tried to install all I get is a black screen with a white line of underscore flashing in the top left of my screen.

  I downloaded an ISO file for Windows 7 from my other laptop and was able to boot from there to get to the point where I would be able to try a system restore, use the prompt, etc., but even once it is not solved the problem.
  At some point, the screen showed that there is a cable that is not connected or something, I don't not entered all of this, but I do not know how to check this part of it. Could someone please give me direction from here to what I can do?

  Thank you

  > However now after a tried update install all I get is a black screen with a white flashing line of underscores in the upper left corner of my screen.

  This is a typical symptom for a faulty HARD drive.
  I had the same cursor blinking in the upper left corner and finally I could solve this problem using the new HARD disk.

  > At some point, the screen showed that there is a cable that is not connected or something.
  Maybe you mean the error: pxe/e61: mediatest failure, check the cable of
  This happens if the portable computer is trying to boot from LAN. This happens because the OS on the HARD drive is not bootable, and this happens especially if the HARD drive is malfunctioning

  In my opinion, you need to change the HARD drive.
  I think this should solve the problem.

• Not able to install the common module on satellite Pro A120

  Hi guys:
  I recently reinstalled xp professional on my satellite pro A120. I could download and install the main drivers of http://uk.computers.toshiba-europe.com and my phone is functional. However, I did not all sounds and (F6 & F7 and toggle) function keys not working, even after insalling the sound card. I read some of the posts on this forum and found that I needed insall the 'common' module to make them functional. I downloaded the driver from module common too, but when I run the Setup it starts initially, but fails both the configuration is complete.

  The same thing happens also with a few other drivers as saver of energy etc... I was not able to run the Setup program for the common module & driver power saver, basically, nothing happens after I have the respective installation.

  Can anyone help please?

  Pravesh

  As far as I know on the download page you can find the installation instructions with exact installation document order how to install drivers and tools specific to Toshiba and utilities.
  You have installed all the stuff after this installation order?

• not able to findout the video call icon

  Not able to find the video call icon in my version of android 2.3 samsung mobile, after you have downloaded Skype application.pl.explain me how use video call my mobile IAM.

  Kindly answer my question.

• Satellite A100: I am not able to use the keys FN - common module error

  HY,

  I have a toshiba satellite A100 series and I have a problem:
  I'm not able to use the fn functions (for example fn + f9 to turn off the touchpad or fn + f3 to the eve and so on...) and I got an error concerning "common module.

  A dialog box told me that the common module is closed...
  Someone knows this problem?

  I'm sorry for English...

  Thank you

  Hello

  I put t know why this error message and why the common modules stopped working, but to my knowledge, the common modules are needed to run and use the FN keys for example.

  So here is my advice;
  Go to Toshiba's European diver page, choose the common law modules, download, unzip, and reinstall it again!

  After restarting again the FN keys should work again.

  Best regards and good luck

• Not able to keep the IP STATIC address' 'Windows '.

  Hello.. I'm not able to change the static IP address in my Windows Server 2012 Standard R2 64 bit system.

  I follow the steps below:
  1. disable the Ethernet (name of the VM network)
  2. access to the IPv4 properties;
  3. setting the following value:
  (i) use the following IP address:

  a. intellectual property:

  b. subnet Mask: 255.255.255.0
  c. default Gateway:<>
  (ii) use the following DNS server address:
  a. preferred DNS server: 127.0.0.1
  (iii) validate the output parameters: true
  4. click on Ok.
  5. click on Ok.

  After that, he tries to change the IP address. But the DHCP service is disabled; Internet no longer works and he asks that "let windows detect the settings of the system." If you click ok, the IP address is once again is changed in 192.168.2.17.

  But if I change the IP from 192.168.2.18 to 192.168.2.15, and then also in the internet stops working.

  Seuugest nicely.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Printers / HP Photosmart 5520: my printer asked a password am not able to find the password or reset an another pls help

  my printer was asking a password am not able to find the password or reset an another pls help

  I've used it since December when I bought the printer, but I just changemy internet company

  It was when he said ask for password which i don't remember not pls help.

  I can be paid to [personal information deleted]

  Hi @funmi09

  I want to help you set up your printer for your internet company recently changed. This document provides the steps necessary to find the WEP key or WPA or your wireless network password.

  Once you retrieve your password, the following will help you to configure the printer; Connection of the printer after you have changed your wireless network.

  If you still can't find your password, you will need to contact your ISP (internet service provider).

  I hope this helps.

• Not able to see the software Audio Beat and silent witness not lit on cool windows 8

  Hello

  I use a laptop: HP ENVY 4 1046tx. I installed fresh windows 8 on it. After that I downloaded the audio software of HP software: the site, but this driver is not accepting.

  1. I am not able to see the Beat Audio software and Equalizer setting in Control Panel.

  2. when I am pressing mute mute button (red light) was not on the button

  Thank you

  Prabhat

  Try the driver IDT Audio here:

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58635.exe

• I am not able to hear the sound even if my drivers are installed properly in windows 7

  I am not able to hear the sound even if my drivers are installed properly in windows 7 and the test tone does not work for 1 month I am facing this problem please help.and windows media player also has a problem saying "Windows Media Player cannot access the file. "The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be not correct" Please help...
  I have media chip c with creative 5.1 speakers.
  until this works perfectly...
  I am facing this problem since I made a mistake.
  only, I went to run and went into 'msconfig '.
  After that, I marked start diagnosis then applied
  After having no repeat no sound...
  and then I clicked on normal start, but still I can't get my sound help please

  Hello

  1. What is the brand and model of your computer?

  2. this issue occurs when access to a particular file by using Windows Media Player?

  3. do you see red X on the volume icon in the notification area?

  4. are you able to access the files of music from the original location?

  You can follow the suggestions and then check.

  Solution A: For sound program on your computer.

  Method 1

  You can follow the steps listed below:

  a. right click on the volume icon in the notification area.

  b. go to the playback device and right click on the empty area.

  c. Select Show disabled devices and Show disconnected devices.

  d. right-click on the pregnant , select Activate and go to the Properties.

  e. use of the device select use this device (enabled)

  f. click apply and OK.

  Method 2

  Make sure that the Windows Audio service is started.

  a. click on start.

  (b) in the search box, type services

  c. right click on Windows Audio and go to Properties.

  d. Select Automatic from the Startup type drop down.

  e. click on start.

  f. click apply and OK.

  g. restart the computer.

  See also:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Solution B: Due to Windows Media Player.

  Method 1

  You can run the troubleshooter in Windows Media Player.

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2

  You can address everyone on the file.

  a. right click on the file and click on Properties.

  (b) in the Properties window, click on Security tab.

  c. now, click on Edit , then click on Add.

  d. now, type everyone in the box and click OK.

  e. then check the full control box.

  f. click apply and then click OK

  See also:

  What are the permissions?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-permissions

• Not able to check the upgrade - Windows 8

  Original title: updates

  A blue bar keeps coming back, it says: Windows needs your help: so he said windows update was not able to verify the new updates for the last 30 days. Go to windows update to fix the problem. I tried all the ideals? This bar keeps coming back every 15 seconds, I'm going to windows updates and it does not update.

  Hi Michael,

  Thanks for posting your query in Microsoft Community.

  I understand that you receive a blue bar to go the Windows updates to check for updates and install to keep the computer up-to-date, but it fails. I'll be happy to answer your query. Let me ask you;

  • What security software is installed on the computer?
  • Using proxy connection?

  This may be due to reasons various, such as the files required by Windows update is missing or damaged, connection proxy security, software, etc. Let's try the following methods and check the status.

  Method 1: Run the Windows Update troubleshooting tool

  1. Open the Windows Update troubleshooting tool by hitting swipe in the edge right of the screen, tap Search (or if you use a mouse, pointing to the top right of the screen, move the mouse down and then clicking Search), entering the Troubleshooting in the search box, by typing or clicking on settings then tapping or clicking on the resolution of the problems. Under system and security, tap or click fix problems with Windows Update.

  2. Run the troubleshooter, and then open Windows Update and try installing the update again.

  Method 2: Turn off the proxy connection

  Press Windows key + R, type inetcpl.cpl , and then press OK

  Click on the connections tab, and then click LAN settings

  Uncheck the option use a proxy server for your LAN

  Click OK

  Method 3: Disable security software

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Method 4: Run the DISM tool

  1. Enter in the right edge of the screen and then click on Search.
     (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click find.)

  2. Enter command prompt in the search box.

  3. In the results list, drag down on or right click command prompt, and then press or click run as administrator.

  4. In the administrator: command prompt window, type the following commands. Press ENTER after each command:

     DISM.exe / Online/Cleanup-image /Scanhealth

     DISM.exe / Online/Cleanup-image /Restorehealth

  5. To close the administrator: command prompt window, type Exitand press ENTER.

  6. Run Windows Update again.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.