Not able to connect to restart/profile/finder keychain problems

Similar Questions

• Not able to connect to new router: WEP / WPA2 problems

  Dear,

  I changed my router and when I want to connect to my 8500 has more to the new network, it asks me a WEP password.

  However, the new network is WPA2 protected, so the printer does not recognize the password.

  The printer does not have the possibility of entering my WPA2 password for the network.

  Any suggestions? The network works fine on my phone/macbook.

  Thanks in advance!

  Dies

  Router brand and model number?   Use a fixed wireless channel as the 1, 6 or 11, never 'auto', try all three.  Use 20 Mhz only or 145Mbps router function.   Try now.

• My local network is not sending data but receiving. I am not able to connect to internet

  My local network is not sending data but receiving. I am not able to connect to the internet. No problem on my side of the seller.

  conduct a search on the internet, nothing works

  Hi Kaushal,

  1. What is the accurate and complete error message you get?
  2. don't you make changes to the computer before the show?
  3. which antivirus is installed on the computer?

  I suggest you try the steps from the following link:

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-in/Windows7/why-can-t-i-connect-to-the-Internet

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• I get the message when you set up a new user "a temporary user profile is loaded because Windows was not able to connect you with your local profile."

  Dear all,

  I have a Windows PC in my office. Because of some configuration issue, I deleted the domain user and tried to connect to the system with the same user credentials. It identify you with the credentials of the user, but I get a message saying: "a temporary user profile is loaded because Windows was not able to connect you with your local profile."
  This system is joined to the domain and the profile is an Active Directory user.
  Here are the details of the event ID:

  Details Product: Windows operating system Event ID: 1515 Source: Userenv Version: 5.2 Symbolic name: EVENT_PROFILE_DIR_BACKEDUP Message: Windows has backed up this user's profile. Windows will automatically try to use the saved profile the next time the user connects. Explanation A temporary user profile is loaded because Windows was unable to connect with your local profile. A possible cause of this is if your local profile has been corrupted or that you no longer have the correct privileges for profile records. Note: Any changes made to the temporary profile is lost once you disconnect. User action Search the profiles additional events in the event log for more information on the reason why this happened or contact the system administrator for further assistance.

  There is currently no article for this specific error Microsoft Knowledge Base or an event message. For more information on other technical support options, you can use to find answers online, see http://support.microsoft.com/default.aspx.

  Please, help me to create the same user profile in the system with formatting system.

  Hello

  I suggest you to refer to this link and check if it helps:

  http://support.Microsoft.com/kb/947215

  It will be useful.

• not being is not able to connect it says unable to load the user profile

  not being not able to connect it said could not load user profile and then the computer automatically disconnects me trying

  ·                         Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• I am not able to connect on my user profile.

  I am not able to connect to my user profile.  I'm the account administrator.  My password does not work or I can not recall.  I read a lot about other people having similar problems, and most of the advice given to them is not really easy to understand.  It seems that the person must jump through a bunch of hoops just to solve a problem that happens sporadically for no apparent reason a lot of people.  I had this problem before, except that all my accounts could not be consulted and spent a lot of money to get it repaired.  Now, four months later, cannot access my main account, and the other two accounts don't change anything because they are not the main account.  What can we do to prevent that from happening.  You should not have more than one account as your main account for just because you know you need to because you know it will happen again, no matter what you do?

  Hello

  Maybe this will help you:

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
  known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
  Profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
  two with the same password) use to test or difficulty of the other.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Not able to connect to the user account, error: user profile Service has no logon

  I'm on a HP Pavilion dv7 with Windows 7.  I created a user account for my wife but she cannot open a session because of the messages "the user profile Service has no logon.  User profile cannot be loaded. »

  Where and how can I fix it?

  Thank you.

  Larry

  Original title: need help with setting up an account

  Hi Larry,
  Thanks for posting your query in Microsoft Community.

  From your description, it seems that you are not able to connect to the user account when you try to connect you get following error. The user profile Service has no logon

  This behavior can occur if the user profile was deleted manually using the command prompt or by using Windows Explorer. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  To resolve the problem with the user account, you can follow these steps:
  Method 1:
  (a) click Start, type regedit in the start search box, and then press ENTER.
  (b) search for, and then expand the following registry subkey:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  (c) right click the SID that you want to remove, and then click on remove.
  (d) log on to the computer and create a new profile.
  You can also check this link:
  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Important: The above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Method 2: Also, see the steps in the following Microsoft article:

  (a) error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Note: We strongly advise against making it the standard way to remove the user profiles on computers. Documented and supported approach is using the system advanced settings in the system, "Profiles" settings properties For programs, it is available using the API 'delete profile '.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  (b) how to back up and restore the registry in Windows
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  (c) IF you still have the problem then you can follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  For any Windows help in the future, feel free to contact us and we will be happy to help you.

• I am not able to connect to the vcenter installed on the local host after restarting the Windows 2008r2

  Hi, I'm a newbie to Vcenter.  I just found out that I am not able to connect to the vcenter installed on the local host after restarting the Windows 2008r2

  Hello Cy1989,

  Check the items below in your vCenter server.

  1. check that VMware VirtualCenter Server service is started otherwise starts pls start...

  2 Vefiry VMware VirtualCenter Management Web Services is started otherwise start pls start...

  3. check that the configuration of the ODBC Data Source (DSN) used to connect to the database for vCenter Server is correct.

  4 Vefiry database are running and all required database services are running...

• Not able to connect to the server with modem 56 k

  I try to connect my Tecra via modem 56 k Internet.
  Also, I tried with another computer laptop with the same details and that worked.
  But when I try it on my Tecra I get an error that is not able to connect to the server.

  So I think that it is a parameter that is not defined correctly for the modem.
  (If you compare it to another laptop all parameters are the same as windows).

  Thanks in advance,

  Theo

  Hello Theo

  Please remove the Dial-up connections all created and after that, remove the modem from Device Manager. Restart the device and initially ensure that the modem is properly configured (query modem Agic under Diagnostics). I put t know which Tecra you have, but many of them have preinstalled TOSHIBA PC Diagnostic Tool. With this tool, you can see all the equipment including modem.

  After having it set up new Dial-up connection and check the functionality. Be sure to wait for the tone option is disabled.

• Im not able to connect to the internet?

  Im not able to connect to the internet and the message that reeds "the instruction at"0x00bb707c"referenced memory at 0x1ab4a07 memory could not writen

  Hello

  1. don't you make changes to your computer before the problem?

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  Test the issue in safe mode with network.

  Step 2:

  If it works fine in safe mode with network, turn on your computer in a clean boot State and check if the problem persists.

  Note: Don't forget to restart your computer as usual.

• I am not able to connect to ePrint

  I am not able to connect to ePrint, after entering the user name and password a new window appears, advise to click on the connected HP. After clicking on the button I get error 404, page not found.

  Not either of the 5 applications that are installed on the printer, not working, by selecting I see apps update... Please wait and then cancel.

  Can anyone help?

  Thank you

  Hi hp323,

  Welcome to the HP Support forums.  I understand that you are unable to get to work on your printer Photosmart 7520 applications and that you can not connect to connected HP.

  Connected HP was rolled out for the United States and the United Kingdom.  Please try connecting HP ePrintCenter with one country other than the United States or the United Kingdom as your choice of countries (which can be chosen in the lower left corner of the screen, please see the screen capture below).  Who will stop the redirection to connected HP.  What happens, is that you try to connect to the USA/UK ePrintCenter, which automatically redirects.  Redirection is help the country from the computer and tries to redirect to HP related to your country and it fails because there is not a HP connected to your country.

  

  Regarding applications, HP is aware of the problem and working on a solution. It is recommended that you have your updates of product set to automatic on the front of the printer in order to receive the update as soon as it is available. If you wish to discuss with a phone support agent, please call HP Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region, please click the link below to find technical support for your country/region number.

• Not able to connect to the internet via blackberry Simulator

  Hello! I use Windows7 32 bit and Blackberry Java plug-in for Eclipse version 1.5.0 and part net.rim.ejde.componentpack7.0.0_7.0.0.33 package. I am not able to connect to any external URL browser Simulator. Whenever I try to hit any URL, I get an error "could not find the server asked.

  When I start the MDS Server, I get the following log:

  02/12/27 20:00:32.106 IST >: [0]:::
  02/12/27 20:00:32.117 IST >: [1]:::
  02/12/27 20:00:32.184 IST >: [2]:::
  02/12/27 20:00:32.251 IST >: [3]:::
  Thai, IBM00858, IBM01140, IBM01141, IBM01142, IBM01143, IBM01144, IBM01145, IBM01146, IBM01147, IBM01148, IBM01149, IBM037, IBM1026, IBM1047, IBM273, IBM277, IBM278, IBM280, IB
  4, IBM285, IBM297, IBM420, IBM424, IBM437, IBM500, IBM775, IBM850, IBM852, IBM855, IBM857, IBM860, IBM861, IBM862, IBM863, IBM864, IBM865, IBM866, IBM868, IBM869, IBM870, IBM871, I
  18,ISO-2022-CN,ISO-2022-JP,ISO-2022-JP-2,ISO-2022-KR,ISO-8859-1,ISO-8859-13,ISO-8859-15,ISO-8859-2,ISO-8859-3,ISO-8859-4,ISO-8859-5,ISO-8859-6,ISO-8859-7,ISO
  59-8,ISO-8859-9,JIS_X0201,JIS_X0212-1990,KOI8-R,KOI8-U,Shift_JIS,tis-620,US-ASCII,UTF-16,UTF-16BE,UTF-16LE,UTF-32,UTF-32BE,UTF-32LE,UTF-8,Windows-1250,window
  251,Windows-1252,Windows-1253,Windows-1254,Windows-1255,Windows-1256,Windows-1257,Windows-1258,Windows-31J,x-Big5-HKSCS-2001,x-Big5-Solaris,x-EUC-JP-Linux,x-
  -TW,x-eucJP-Open,x-IBM1006,x-IBM1025,x-IBM1046,x-IBM1097,x-IBM1098,x-IBM1112,x-IBM1122,x-IBM1123,x-IBM1124,x-IBM1364,x-IBM1381,x-IBM1383,x-IBM33722,x-IBM737,
  BM833,x-IBM834,x-IBM856,x-IBM874,x-IBM875,x-IBM921,x-IBM922,x-IBM930,x-IBM933,x-IBM935,x-IBM937,x-IBM939,x-IBM942,x-IBM942C,x-IBM943,x-IBM943C,x-IBM948,x-IBM
  x-IBM949C,x-IBM950,x-IBM964,x-IBM970,x-ISCII91,x-ISO-2022-CN-CNS,x-ISO-2022-CN-GB,x-iso-8859-11,x-JIS0208,x-JISAutoDetect,x-Johab,x-MacArabic,x-MacCentralEu
  e,x-MacCroatian,x-MacCyrillic,x-MacDingbat,x-MacGreek,x-MacHebrew,x-MacIceland,x-MACROMAN,x-MacRomania,x-MacSymbol,x-MacThai,x-MacTurkish,x-MacUkraine,x-MS93
  213,x-MS950-HKSCS,x-MS950-HKSCS-XP,x-MSWIN-936,x-pck,x-SJIS_0213,x-UTF-16LE-BOM,X-UTF-32BE-BOM,X-UTF-32LE-BOM,x-Windows-50220,x-Windows-50221,x-Windows-874,x
  ndows-949,x-Windows-950,x-Windows-ISO2022JP >
  02/12/27 20:00:32.254 IST >: [4]:::
  02/12/27 20:00:32.255 IST >: [5]:::
  02/12/27 20:00:32.255 IST >: [6]:::
  02/12/27 20:00:32.268 IST >: [7]:::
  02/12/27 20:00:32.269 IST >: [8]:::
  02/12/27 20:00:32.269 IST >: [9]:::
  02/12/27 20:00:32.269 IST >: [10]:::
  02/12/27 20:00:32.269 IST >: [11]:::
  02/12/27 20:00:32.270 IST >: [12]:::
  02/12/27 20:00:32.270 IST >: [13]:::
  02/12/27 20:00:32.270 IST >: [14]:::
  02/12/27 20:00:32.289 IST >: [15]:::
  02/12/27 20:00:32.290 IST >: [16]:::
  02/12/27 20:00:32.325 IST >: [17]:::
  02/12/27 20:00:32.329 IST >: [18]:::
  02/12/27 20:00:32.338 IST >: [19]:::
  02/12/27 20:00:32.338 IST >: [20]:::
  02/12/27 20:00:32.338 IST >: [21]:::
  02/12/27 20:00:32.339 IST >: [22]:::
  02/12/27 20:00:32.341 IST >: [23]:::
  02/12/27 20:00:32.342 IST >: [24]:::
  02/12/27 20:00:32.345 IST >: [25]:::
  02/12/27 20:00:32.346 IST >: [26]:::
  02/12/27 20:00:32.346 IST >: [28]:::
  02/12/27 20:00:32.346 IST >: [29]:::
  02/12/27 20:00:32.347 IST >: [30]:::
  02/12/27 20:00:32.346 IST >: [27]:::
  02/12/27 20:00:32.353 IST >: [31]:::
  02/12/27 20:00:32.356 IST >: [32]:::
  02/12/27 20:00:32.356 IST >: [33]:::
  02/12/27 20:00:32.356 IST >: [34]:::
  27, 2012 20:00:32 org.apache.catalina.startup.Embedded start
  O: boot tomcat server
  02/12/27 20:00:32.792 IST >: [35]:::
  02/12/27 20:00:32.796 IST >: [36]:::
  02/12/27 20:00:32.817 IST >: [37]:::
  02/12/27 20:00:32.820 IST >: [38]:::
  02/12/27 20:00:32.827 IST >: [39]:::
  02/12/27 20:00:32.828 IST >: [45]:::
  02/12/27 20:00:32.828 IST >: [44]:::
  02/12/27 20:00:32.828 IST >: [43]:::
  02/12/27 20:00:32.828 IST >: [42]:::
  02/12/27 20:00:32.828 IST >: [41]:::
  02/12/27 20:00:32.827 IST >: [40]:::
  02/12/27 20:00:32.830 IST >: [48]:::
  02/12/27 20:00:32.832 IST >: [49]:::
  02/12/27 20:00:32.832 IST >: [50]:::
  02/12/27 20:00:32.832 IST >: [51]:::
  02/12/27 20:00:32.829 IST >: [47]:::
  02/12/27 20:00:32.829 IST >: [46]:::
  27, 2012 20:00:32 org.apache.catalina.core.StandardEngine start
  O: Servlet engine starting: Apache Tomcat/6.0.28
  02/12/27 20:00:32.932 IST >: [52]:::
  02/12/27 20:00:32.932 IST >: [53]:::
  02/12/27 20:00:32.944 IST >: [54]:::
  02/12/27 20:00:32.944 IST >: [55]:::
  27, 2012 20:00:33 org.apache.catalina.startup.ContextConfig defaultWebConfig
  O: no default web.xml file
  Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
  O: AdministrationController (status): init
  Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
  O: C:\Eclipse\plugins\net.rim.ejde.componentpack7.0.0_7.0.0.33\components\MDS\Servers\MDS1
  Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
  O: AdministrationController (statistics): init
  Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
  O: C:\Eclipse\plugins\net.rim.ejde.componentpack7.0.0_7.0.0.33\components\MDS\Servers\MDS1
  Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
  O: AdministrationController (Proxy Mappings): init
  Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
  O: C:\Eclipse\plugins\net.rim.ejde.componentpack7.0.0_7.0.0.33\components\MDS\Servers\MDS1
  Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
  O: AdministrationController (AccessControl): init
  Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
  O: C:\Eclipse\plugins\net.rim.ejde.componentpack7.0.0_7.0.0.33\components\MDS\Servers\MDS1
  Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
  O: AdministrationController (Configuration): init
  Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
  O: C:\Eclipse\plugins\net.rim.ejde.componentpack7.0.0_7.0.0.33\components\MDS\Servers\MDS1
  Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
  O: AdministrationController (Device Mappings): init
  Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
  O: C:\Eclipse\plugins\net.rim.ejde.componentpack7.0.0_7.0.0.33\components\MDS\Servers\MDS1
  27, 2012 20:00:33 org.apache.catalina.startup.ContextConfig defaultWebConfig
  O: no default web.xml file
  27, 2012 20:00:33 org.apache.tomcat.util.net.NioSelectorPool getSharedSelector
  O: using a switch shared for read/write to servlet
  27, 2012 20:00:33 org.apache.coyote.http11.Http11NioProtocol init
  O: initializing Coyote HTTP/1.1 on http-8081
  27, 2012 20:00:33 org.apache.coyote.http11.Http11NioProtocol start
  O: starting Coyote HTTP/1.1 on http-8081
  02/12/27 20:00:33.671 IST >: [56]:::
  02/12/27 20:00:37.169 IST >: [57]:::
  02/12/27 20:00:37.169 IST >: [58]:::

  Any help would be appreciated.

  Thanks in advance

  Mayank Garg

  Auntie Consultancy Services

  You will also need to enter the login and the password for your proxy server in the file rimpublic.property.

• Not able to connect to the server via the AFN TCP

  Hi all

  After Googling carefully I finally decided to post my problem which is really sent me nightmares.

  In my application, I try to connect to a TCP server by using the operator of internet network and after the connection string

  URL = "socket: / /" + ip + ":" + port + ";" deviceside = true; connectionTimeout = 30000; APN =; tunnelauthusername =; tunnelauthpassword =; » ;

  I am able to connect to the internet using the phone's browser, but not able to connect to the TCP server via app.

  In my device APN authentication is disabled by default and the AFN, the name of user and password fields are white that's why I took these settings like white with a value in the connection string.

  When I try to connect via wifi network using the suite of string

  URL = "socket: / /" + ip + ":" + port + ";" deviceside = true; interface = wifi; connectionTimeout = 30000;

  I am able to connect to the server, but not in the case via the AFN.

  Please help me...

  I'm here just stuck and not finding a way out.

  Thank you

  Finally I found the solution to the problem...

  I used ConnectionFactory (network API) to connect to the TCP server and the used connection string is just

  'socket://127.0.0.1:8089 '.

  No need to specify the APN, user name, and password.

  Here's the code used

                   ConnectionFactory connFact = new ConnectionFactory();
                    ConnectionDescriptor connDesc;
                    connDesc = connFact.getConnection("socket://127.0.0.1:8087");
  

• Not able to connect to internet on my PC in Windows 8

  Hello everyone

  Can someone help me?

  I'm in my office and I couldn't connect to the internet I am connected to the domain, OS installed in Windows 7 on my computer of all the... Suddenly I'm not able to connect to the internet. I checked the cable, it is connected... Y at - it none think to do? Help me. See also a black screen on my computer keeps restarting. pls help

  Hi Bob,

  Since you mentioned that you are connected to the domain, I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Please do not hesitate to contact us if you have other questions related to Windows.

• not able to connect my nokia lumia 820 to my laptop with Windows 7

  Original title: lumia 820

  I am not able to connect my nokia lumia 820 to my laptop with Windows 7. Pls advice

  Hello

  The native software for the Nokia 820 is Windows Phone 8. You try to connect via the USB interface? Is there an error message or a given code? You might find more specific assistance to the Nokia support page, here: http://www.nokia.com/us-en/support/product/lumia820/ .

  Keep me posted and let me know how you fare.

  Kind regards

  BearPup