Not able to connect with sysdba

Similar Questions

• Not able to connect with my laptop bluetooth devices

  Hello

  I have a Dell XPS M1330. I could pair my laptop with my phone & share photos & files via bluetooth device... However, lately every time I try to connect my phone with laptop there is a prompt of "unable to connect" on my phone & nothing in my lap top. I went on Panel--> device Bluetooth--> Bluetooth settings & discovered that the box 'Allow Bluetooth devices to find this computer' is not checked, but whenever I have to check it & say OK it gives an error that says "AN ERROR OCCURRED WHILE WINDOWS SAVES YOUR SETTINGS . THE BLUETOOTH DEVICE MAY BE DISCONNECTED. "THE FOLLOWING SETTINGS WERE NOT SAVED: PARAMETERS of DETECTABILITY & CONNECTION SETTINGS".
  I tried to "RESTORE DEFAULT settings", but there was no help!
  Someone please help... I lose on many not be able to connect to the Bluetooth.

  Thank you.

  Hello Ann,.

  Thank you for visiting the Microsoft Asnwers Community.

  There is another thread on the subject which should be useful in your case.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Not able to connect with the Security Server

  Hello

  IM setting up a demo with view 6 environment, and when I try to connect locally on the servers of connection it works fine, but when I try to connect to the Security server fails with the image below.

  

  The Security server has 2 network cards, now in the DMZ and in production. I guess I should also be able to connect directly to the ip production, but the same error.

  We have disabled the firewall between dmz and prod for troubleshooting, but same problem.

  The image below is the Security Server, the addresses here are the ip 'internet', I guess it's true?

  

  The image below is the connection to server 1, the addresses here are internal, and is the FULL domain name, if it was "internet ip" instead?

  

  If I try on the spot to connect to the ip address of prod on security with internet server explorer, im able to connect, but when I select the office that it will fail "cannot display this page", then shows the 'internet' ip in the address field.

  I guess there is just something simple I've missed... hope you understand my question

  Thanks for the support.

  If you do not already have a look at this description of the display configuration, it covers remote access via security servers as well. Setting up remote access with a view PCoIP 4.6 and newer https://communities.VMware.com/docs/doc-14974

  I guess the fact that you can connect through the servers of connection that the URL you configured in the view administrator for servers in connection is a production local IP address/address?

  External security URL server is also an IP/address of DMZ / external can be solved?

• Not able to connect with the root via putty ssh account

  Hello

  I activated the lock mode and activated ssh as well.but I am still unable to log in using PuTTY says access denied. At the same time, I can able to connect to esxi console using the root account. Help, please.

  In the locked mode, you will only be able to connect through vCenter, not via SSH.

  See http://pubs.vmware.com/vsphere-51/topic/com.vmware.vsphere.security.doc/GUID-F8F105F7-CF93-46DF-9319-F8991839D265.html

• BlackBerry Z3 bought used blackberry z3... n i; m not able to connect with my blackberry newly made.

  Hello

  I bought blackberry z3 mobile used... when I bought, I thought that doing factory reset will be best method of formatting data... after factory reset I when put my blackberry newly made id iam unable to log my id why... and to msg as... Please inter your previous blackberry for installing... Please help meim not able to run any application on my phone...

  djraaz wrote:

  .. and to msg as... Please inter your previous blackberry for installing... Please help meim not able to run any application on my phone...

  If the device was installed OS 10.3.2 BlackBerry Protect has been enabled, then you've basically bricked your Z3.

  You know the OLD BBID to continue.

  Contact the seller.

• Not able to connect as sysdba

  Hi all

  I'm connected to a server with the remote desktop connection windows. Here when I try to log into the database with a general user I managed to connect to the database. But when I try to log in with "/ as sysdba" it fails. Plesae suggest.

  Thank you

  Saurabh

  C:\users\administrator>sqlplus / as sysdba

  SQL * more: release 10.2.0.3.0 - Production Tue Oct 22 03:05:20 2015

  Copyright (c) 1982, 2006, Oracle.  All rights reserved.

  ERROR:

  ORA-12560: TNS:protocol adapter error

  These errors are USUALLY due to not having the set ORACLE_SID environment variable:

  C:\Users\Documents\Oracle_stuff\examples >set ORACLE_SID = "" "

  C:\Users\Documents\Oracle_stuff\examples>sqlplus / as sysdba

  SQL * more: Production of liberation 12.1.0.2.0 Tue Oct 22 09:18:18 2015

  Copyright (c) 1982, 2014, Oracle.  All rights reserved.

  ERROR:

  ORA-12560: TNS:protocol adapter error

  Defining the ORACLE_SID often 'fixed' this 'problem ':

  C:\Users\Documents\Oracle_stuff\examples >set ORACLE_SID = smedley

  C:\Users\Documents\Oracle_stuff\examples>sqlplus / as sysdba

  SQL * more: Production of liberation 12.1.0.2.0 Tue Oct 22 09:20:14 2015

  Copyright (c) 1982, 2014, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL >

  Note that once the ORACLE_SID is defined no TNS error was generated.

  You must check your environment when you get this TNS error as it is likely due to not having the set ORACLE_SID.  You CAN also connect without going through the set ORACLE_SID, but you must have the tnsnames.ora file configured with your local database information:

  C:\Users\Documents\Oracle_stuff\examples>sqlplus /@smedley as sysdba

  SQL * more: Production of liberation 12.1.0.2.0 Tue Oct 22 09:25:14 2015

  Copyright (c) 1982, 2014, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL >

  This example uses a syntax of "remote" login for access to the local database through the tnsnames.ora Configuration entry.

  I hope that was helpful.

  David Fitzjarrell

• Not able to connect with OBIEE 11g integrating short

  Hi all

  I try to connect OBIEE DPR (Repository) using short Integrator3.0.

  All credentials are correct, OBIEE 11 g is also in place.

  It shows the error:

  java.net.ConnectException: unable to connect to port 7001 machine localhost

  How reslove it.

  Please, give me suggestion.

  Thank you

  Prashant

  Try to use port 9703.

• Not able to connect to the server with modem 56 k

  I try to connect my Tecra via modem 56 k Internet.
  Also, I tried with another computer laptop with the same details and that worked.
  But when I try it on my Tecra I get an error that is not able to connect to the server.

  So I think that it is a parameter that is not defined correctly for the modem.
  (If you compare it to another laptop all parameters are the same as windows).

  Thanks in advance,

  Theo

  Hello Theo

  Please remove the Dial-up connections all created and after that, remove the modem from Device Manager. Restart the device and initially ensure that the modem is properly configured (query modem Agic under Diagnostics). I put t know which Tecra you have, but many of them have preinstalled TOSHIBA PC Diagnostic Tool. With this tool, you can see all the equipment including modem.

  After having it set up new Dial-up connection and check the functionality. Be sure to wait for the tone option is disabled.

• I am not able to connect to my computer with my password, it tells me to connect using my administrator password.

  I am not able to connect to my computer with my password, it says Séverine using administrater password but it is not the password of accomplishments and keeps telling me to enter my password. After several attempts to connect to my computer it stops. What can I do?

  Hello

  Press twice CTRL + ALT + DELETE (at the same time), you will get the classic quick and allows you to enter your user name.

  I hope this helps.

• not able to connect my nokia lumia 820 to my laptop with Windows 7

  Original title: lumia 820

  I am not able to connect my nokia lumia 820 to my laptop with Windows 7. Pls advice

  Hello

  The native software for the Nokia 820 is Windows Phone 8. You try to connect via the USB interface? Is there an error message or a given code? You might find more specific assistance to the Nokia support page, here: http://www.nokia.com/us-en/support/product/lumia820/ .

  Keep me posted and let me know how you fare.

  Kind regards

  BearPup

• I get the message when you set up a new user "a temporary user profile is loaded because Windows was not able to connect you with your local profile."

  Dear all,

  I have a Windows PC in my office. Because of some configuration issue, I deleted the domain user and tried to connect to the system with the same user credentials. It identify you with the credentials of the user, but I get a message saying: "a temporary user profile is loaded because Windows was not able to connect you with your local profile."
  This system is joined to the domain and the profile is an Active Directory user.
  Here are the details of the event ID:

  Details Product: Windows operating system Event ID: 1515 Source: Userenv Version: 5.2 Symbolic name: EVENT_PROFILE_DIR_BACKEDUP Message: Windows has backed up this user's profile. Windows will automatically try to use the saved profile the next time the user connects. Explanation A temporary user profile is loaded because Windows was unable to connect with your local profile. A possible cause of this is if your local profile has been corrupted or that you no longer have the correct privileges for profile records. Note: Any changes made to the temporary profile is lost once you disconnect. User action Search the profiles additional events in the event log for more information on the reason why this happened or contact the system administrator for further assistance.

  There is currently no article for this specific error Microsoft Knowledge Base or an event message. For more information on other technical support options, you can use to find answers online, see http://support.microsoft.com/default.aspx.

  Please, help me to create the same user profile in the system with formatting system.

  Hello

  I suggest you to refer to this link and check if it helps:

  http://support.Microsoft.com/kb/947215

  It will be useful.

• Not able to connect after changing the password using the VALUES ALTER clause

  Hello
  
  John explained earlier the clause VALUES below thread.
  
  Status expired
  
  I created a new account named SURI, and tried to use the password of the user account from the HR by using the VALUES clause. I was able to change the password but not able to connect SURI with HR password.
  
  Please see below for details. And the SQL statements that I have tried.
  

  SQL*Plus: Release 10.2.0.1.0 - Production on Mon Aug 13 18:44:50 2012
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  Enter user-name: sys as sysdba
  Enter password:
  
  Connected to:
  Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
  
  SQL> SELECT password
    2  FROM dba_users
    3  WHERE username = 'HR';
  
  PASSWORD
  ------------------------------
  4C6D73C3E8B0F0DA
  
  SQL> ALTER USER SURI IDENTIFIED BY VALUES '4C6D73C3E8B0F0DA';
  
  User altered.
  
  SQL> SELECT password
    2  FROM dba_users
    3  WHERE username='SURI';
  
  PASSWORD
  ------------------------------
  4C6D73C3E8B0F0DA
  
  SQL> conn suri/hr     -- HR account's password is hr only
  ERROR:
  ORA-01017: invalid username/password; logon denied
  
  
  Warning: You are no longer connected to ORACLE.
  
  SQL>

  Thank you
  Suri

  Its because you have used a different username.
  Oracle produces a hash based on the user name and the password, not only the password.

  Therefore, you can not use the hashed password of a user to log on to the account of another user.

  You need to get the password hashed Suri and then connect you to suri by using the password hashed Suri (using the identified by the syntax of values)

• not able to connect to oracle directly

  operating system: AIX ch5dlfp089 1 6 000B4A22D900
  Oracle: 11.2.0.1.0
  Question: created db oracle using dbca (gui). DB created successfully
  When I checked recently using putty to check the health of the db. I am able to see smon and orcl works well using
  
  PS - eaf | grep orcl.
  
  How ever when I try to connect to the db using sqlplus invites. It's showing an idle instance.
  $ sqlplus "/ as sysdba".
  
  SQL * more: Production version 11.2.0.1.0 on Mon Oct 18 00:52:08 2010
  
  Copyright (c) 1982, 2009, Oracle. All rights reserved.
  
  Connect to an instance is idle.
  
  SQL > exit
  
  oratab input shows ok
  ORCL:/Home/Oracle/app/Oracle/product/11.2.0/dbhome_1:
  
  CHECK THE BASE APPROX. values of variables
  
  $ echo $ORACLE_SID
  ORCL
  $ echo $ORACLE_HOME
  /Home/Oracle/app/Oracle/product/11.2.0/dbhome_1/
  Profile shows as follows
  
  $ cat .profile
  PATH = / usr/bin: / etc: / usr/sbin: / usr/ucb: $HOME/bin: / usr/bin / X 11: / sbin:
  
  export PATH
  
  So [s "$MAIL"] # this is at the start of the shell. Under normal conditions
  then echo operation # of '$MAILMSG', the Shell controls
  fi # periodically.
  ORACLE_SID = orcl
  export ORACLE_SID
  ORACLE_HOME=/home/Oracle/app/Oracle/product/11.2.0/dbhome_1/
  Export ORACLE_HOME
  LIBPATH = $ORACLE_HOME/lib: $LIBPATH
  Export LIBPATH
  PATH = $ORACLE_HOME/bin: $PATH
  export PATH
  
  However, I am able to connect to the db using tns
  
  $ sqlplus 'sys/Oracle123@orcl as sysdba'
  
  Connected to:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL > EXIT
  
  
  Question: what could be the reason why I'm not able to connect db directly? without tns?
  Any error that could have happened, or a any restriction could be fixed for this access?

  Hello

  In your profile changes

  ORACLE_HOME=/home/Oracle/app/Oracle/product/11.2.0/dbhome_1

  remove the / end and try to

  Anand

• Could not able to connect to Oracle

  Hello
  
  I use as Oracle 9i database.
  
  I am not able to connect to the database please help.
  
  When I tried with system and administrator he displayed: name of user and password invalid. connection refused
  
  When I tried with scott/tiger: It displays account is locked.
  
  Please help how I can fix.

  Open a command window

  CUT the lines below

  set
  sqlplus
  / as sysdba
  Select * from version $ v

  Commands to PASTE it into the command window
  CUT orders & results & PASTE it here

• HP Color LaserJet Pro M177 MFP: HP Color LaserJet not able to connect to connected HP

  Hello

  I try to activate my printer (HP Color LaserJet M177fw MFP Pro) ePrint and much more, but I'm not able to do it cause connection problem, I guess.

  When I'm trying to 'print the information sheet', for example, the printer is not able to connect (stay on 'Sign in' loop indefinitely).

  My printer is less than a Vodafone EasyBox router, with firewall disabled and no specific barriers defined by me.

  Should I set some port forwarding (even if they should apply to ignore the firewall, when turned on) or any other specific configuration in the router?

  the same connection problem, of course, it happens when I do touch printer and console web administration, of course.

  In addition, I'll let you know that my router is not blocking access, for example, to-from the web (i.e. I am able to manage my NAS from the outside, since he admitted to a DDNS) and other local devices

  I alreay set 8.8.8.8 and 8.8.4.4 as DNS pri/sec and had an output of cycle after the series of DNS.

  My printer also has a static IP address (defined by the DHCP protocol, based on the MAC address), so not a problem, I think.

  Thanks in advance for your help,

  Lorenzo

  Hi Lorenzo,.

  To enable Web Services fumctionality, you'll need to install the latest firmware on your printer (version 20160525)

  You can locate the current version of your printer by selecting configuration > reports > Page of Configuration, the firmware version is listed under the information section on the printer.

  Updated the firmware on Linux by following these steps, but I don't know if the latest firmware is available for Linux or not, try:

  http://hplipopensource.com/hplip-Web/tech_docs/man_pages/firmware.html

  If the latest firmware is not available for linux, temporarily install the printer on a Windows PC or a my and install the latest firmware:

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

  Kind regards

  Shlomi