Not able to launch the program created in c:\Windows.

Similar Questions

• I Lightrrom 6.1.1 - it crashes.  Answers do not - constantly.  Launch the program, wait 3 minutes, then it crashes - never to return.  Trying to turn off the graphics acceleration result in a blocking * instantly *.  All the GPU drivers are up-to-date (Wi

  I Lightrrom 6.1.1 - it crashes.  Answers do not - constantly.  Launch the program, wait 3 minutes, then it crashes - never to return.  Trying to turn off the graphics acceleration result in a blocking * instantly *.  All the GPU drivers are up-to-date (Windows system).  AND - I can't uninstall it either.  Without hope.  So, what can I do?

  Hello

  Please, go to the Windows, where Device Manager, expand display adapters.

  Turn off the graphics card and open Lightroom, go to Lightroom preferences, then the performance tab, and then uncheck the option "use graphics processor.

  Lightroom farm and go back to Device Manager and activate the graphic card.

  Open Lightroom and then work in Lightroom and check if it works very well.

  Kind regards

  Tanuj Sandal

• I have downloaded the software, adobe digital editions, but can not open or launch the program

  I have download Adobe Digital editions but can not open or launch the program.

  What operating system.

  If Vista, read http://helpx.adobe.com/digital-editions/kb/installing-digital-editions-20-windows.html

  If XP, a lot of people have problems.  A resolution is to install the 1.7.2 version instead (which also avoids other bugs).

  Version 1.7.2 is a little hard to find,

  I found this for PC at http://www.tucows.com/preview/853736/Adobe-Digital-Edition-For-EBooks

  I don't know where there is a Mac version.

• I was not able to find the instructions for upgrade to Windows 10. The upgrade site says to buy a new PC.

  Original title: upgrade

  I am operating Windows Vista. I was not able to find the instructions for upgrade to Windows 10. The upgrade site says to buy a new PC. Any advice?

  Hello

  You buy Windows 10, as there is no free upgrade to Vista 10.

  https://www.Yahoo.com/tech/s/Microsoft-just-confirmed-Windows-10-pricing-everything-know-114542550.html

  Microsoft on Monday said CNET Windows 10 will cost just as much as its predecessor. This means price for Windows 10 will run anywhere from $110 for Windows 10 Home package at $199 for Windows 10 Pro edition. In addition a Pack Pro 10 will allow users upgrade Home Pro for $99.

  http://www.CNET.com/news/Microsoft-prices-single-Windows-10-licenses-at-119-for-home-199-for-Pro/

  But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

  "FAQ Windows 10.

  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

  See you soon.

• HP recovery mananger-is not able to launch the disk for the recovery partition check, why?

  Hello HP,.

  I had a problem with my hard drive. HP send me a new.

  I copy all the information for the new hard drive recovery, but I think that hp, Manager of recovery do not recognize the recovery partition.

  can you help me please?

  I was able to do the recovery from the computer disks in a safe mode. now I'm restoration of original image.

  just in case I can help someone.

• Why am I not able to launch the new CC Lightroom on my Macbook Pro?

  Downloaded the new CC Lightroom on my iMac and Macbook Pro. It will not launch on the MBP. Time of launch, the icon appears on the doc literally a second and then disappears.  No problem on my desktop... Everyone there knows what it is? Thank you, IH

  Could you try logout - and still the creative cloud app.

  Then relaunch Lr Desktop.

  I hope this helps.

  Guido

• Not able to play the video created with camera

  Microsoft ADPCM format (2)

  OK I got a new camera and when I try to play the video on my computer it gives me Microsoft ADPCM Format (2) no idea where im stuck and I went on the microsoft.com site, and it says its for windows 7 {(j'ai windows vista) so what im asking is is - anyone know where to download safe?} otherwise im going to get rid of him

  Hello HG143,

  ·         What is the Format of the video file you are importing and try to play?

  ADPCM, commonly referred to as a form of compression, cannot be downloaded from anywhere. It is a type of compression. The error indicates that one of the files you're trying to play does not support this format, and you may have a missing codec.

  Find out what is the format of the file you play and make sure you have the codecs for this file. Here is an article that will give you information about the Codecs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  It could also be as possible that this could be caused by some of the corrupt codec. If you have any third-party Codecs installed on your computer, I suggest you uninstall the Codecs and check if you have the same problem.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Not able to download the Program Guide data

  I'm having the same problem. I use Windows 7 Professional x 64 and have a wired connection to the internet. I can not get the MC to download an update for the guide.

  In the activity log event ID is '0 '. Here are additional details contained in the message window.

  Journal name: Media Center
  Source: MCUpdate
  Date: 2010-02-18 09:12:51
  Event ID: 0
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: WJH-ZT-PC
  Description:
  09:12:35 - the package directory is already updated.
  09:12:35 - ClientUpdate the package is already up-to-date.
  09:12:35 - NetTV package is already up-to-date.
  09:12:35 - MCESpotlight the package is already up-to-date.
  09:12:35 - MCEClientUX the package is already up-to-date.
  09:12:35 - SportsSchedule the package is already up-to-date.
  09:12:35 - SportsV2 the package is already up-to-date.
  09:12:35 - The Broadband package is already up-to-date.
  09:12:35 - MCEClientMaintenance the package is already up-to-date.
  09:12:35 - NetworkMetadata the package is not available.
  09:12:35 - test of internet connection.
  09:12:35 - connection is established.
  09:12:36 - recovery EpgListings.
  09:12:36 - EpgListings treatment.
  09:12:36 - EpgListing - 8.enc recovery.
  09:12:40 - 28514937_ListingData.mxf extraction.
  09:12:40 - 28514937_ListingData.mxf treatment.
  09:12:51 - errors during the last update.
  09:12:51 - retries at 2010-02-19 12:35:01 AM.

  Any ideas what the problem is and how it can be fixed?

  So, I finally got the guide to download. I don't know why he picked up, and I don't know why it stopped working in the first place. It is the sequence of steps that brought her to life.

  Synchronize the PC with the time clock Internet.
  Disable Media Center & reboot.
  Activate the functionality Media Center and restart.
  Run the Media Center Setup from scratch.
  Open a window (as administrator) command prompt and run mcupdate with the parameter - uf (start/wait mcupdate %windir%\ehome /d - uf).
  Mcupdate lasted several minutes and finally crashed with a message that the update process could not continue. On the taskbar, the icon Mcupdate said he was "Starting Client Update".
  Mcupdate restarted itself and ran until she has yet.
  This repeated 4 or 5 times and I finally have it canceled since the Task Manager.
  Opened the Media Center and started the update of the Guide from there.
  A message popped up indicating that the guide was a problem with the client.
  Revived the update of the guide and it is finally completed successfully.
  Close the Media Center client and reopen it. The Guide seems perfect.

  All is now well with the Media Center client. However, I don't know why, or if it will start still hesitated to more downloads. Perhaps documenting this sequence of steps will help others. Maybe Microsoft can use this information to help solve this bug in Windows 7 and release a patch.

• Not able to play the game Metro 2033 on Windows Vista-based computer.

  I just installed the game Metro 2033 on my Vista system that uses a 1080 screen.  In fact, I have two identical screens.

  The game requires activation Steam and Steam normally will attempt to update the program rather than simply enable it during installation.  This leaves a person in the dark as to what happens during the installation.

  It turns out, I use a 3G modem that Steam refuses to support their network of Bit Torrent, so download speed for an update of a concert is around 12 kb/s or 8 hours to make the point on a program that has not yet installed.

  After work, I was quite surprised to find that the program would not go on Steam.  He then took a few hours to find out that there is a solution, that I could load the game by running the executable file that had been installed in the directory Steam for Metro 2033.

  Unfortunately Metro2033, when started this default way a unknown screen resolution.  Thus when the game is started from the Steam directory nested, one gets a message "out of range" on the display of 1080 and nothing can be seen.

  Short of launching the game out, I tried the game again, to my great joy, the second run displays a safe mode issue and I ran it in safe mode.  It is quite an exciting game and I played it all night.  However, I had also contacted support original THQ regarding installation problem/solution.

  Then I fell asleep.  The PC was on.

  The next day, I played the 2003 Metro game again, but I entered in some difficult areas of the game, and I had to reload the saved game.  After awhile, I opted to exit the program.  Later, I started the program, but this time I inadvertently clicked on the Metro2033 icon who had installed Steam.   In my solution, I had pasted a link to the directory of Steam under the original icon and had pressed the wrong button.

  Of course, the first thing I saw, after playing the game for 12 hours, was "out of range".  I opted to return to the office...

  ... However I couldn't come back on the Vista desktop.  I have a 7000, and even Microsoft Entertainment keyboard by pressing the buttons of Windows or Media center wouldn't let me come back to the office.

  The day before, I needed to do this that I've experienced to workaround to start getting and I noticed that the only way I could get on the desktop to run the Task Manager to kill the out of range on my screen message has been to press the Media Center button.

  Once the Media Center menu on breaking the subway 2003 menu I could then enter the office and use the Task Manager.

  However, the next day when I inadvertently started the STEAM version, and again, the screen is become black and says 'Out of Range', I found that my system was stuck in this loop.  No way to get in the Manager of tasks at all, not even with the Media center button on my keyboard.

  Now the background of my question.  When I was forced to start my system again, I noticed the normal BIOS screen and the bar of Vista with Vista is loading, then the familiar sound of Vista boot, but now NO SCREEN at all on startup!  Now, something had inserted a driver in my Vista start which forced my display say "Out of Range" from the start of the desktop of Vista and Vista computer has not yet noticed this.  Normally, I would think that they claim that the screen resolution is wrong and put it on, instead, nothing else than the out of range message rigid or flexible boots.

  Original title: can someone tell me what happened here? Metro2033 and steam game.

  I checked by plugging my second monitor.   The system has Safe Mode startup and I was able to do a restore of the system from the previous day to evening to return to the office.   However, I am quite confused as to what happened.  How the Metro 2033 problem "out of range" migrate to Windows startup by running an update of Steam?

  I use the latest service pack for Vista.

  
  

  It seems that the STEAM snuck in an update and then everything worked fine.

• Not able to run the digital cable Advisor in Windows Media Center

  Digital cable Advisor

  I can't get the digital cable Advisor in Windows Media Center in Windows 7 Home Premium.  After I installed Windows back me to the same Setup screen.  From what I read on the program, after installation it is supposed to start.  I checked the Extras Gallery and it does not appear there after installation.

  Chris-

  I started taking screenshots of the process tonight and of course the DCA installed successfully and actually worked!  My system has passed the test.  I tried installing in DCA 100 times before and never had that day!

  I suspect that the root cause was due to a problem with the motherboard that was recently repaired.  At least that's my story and I stick to it!

  Thanks again for your help.

  Buggy

• Not able to save the PDF created in Acrobat update.

  When I create a PDF file with choice multiple issues / buttons for a user to select using Acrobat 8.0 and send to a user that they cannot save the PDF Acrobat Reader update. A message appears saying that they cannot write in the PDF, so they print to save their data. I need to have write them me back a present form.

  Can I change the settings so that they can modify the form using Acrobat Reader or is there something they can download so that they can enter their answers?

  You must apply the right for the complete file be saved in the drive of

  go to advanced - enable extended in Adobe Reader... rights, then

  Send the new file.

• With the new 15.0 version, I am not able to access the program or my files. I need phone support like Apple, nor I can fix it!

  Hello

  Please take a look at the following document to see if it answers your question about finding the files that are stored locally on your device.

  How to manage files Acrobat DC for iOS

  Please let us know if you have any additional questions.

• Not able to copy the data on USB in WIndows 7 even with administrative rights

  I use Windows 7 64 bit and have administrator rights, I can copy data from USB but system is not allowing me to copy the data on USB. This has happened with me also, but since I change my laptop, this problem has been resolved.

  It happened suddenly, earlier, I managed to copy the data to USB abd take backup of my system, but now it is not possible. Please notify.
  You may need to take possession of your records - see here:
  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/24bdf172-2DBC-43b8-995d-a99b6a81413c/

• Error 0XC0000135 then tried to launch the program GhostSurf

  Original title: 0XC0000135

  Error 0xc0000135 tries to access a program that has been downloaded from the internet and installed. This program is my startup. At startup and when I click on the program (GhostSurf of Cnet by Tenibril Inc.) the same error box appears-"the application could not initialize properly (0xc0000135 error)" what I got wrong, on Windows XP

  Hi PCGREENHORN,

  This can also occur if the shortcut for the program file is corrupted. We recommend that you start the program from C:\Program Files and check the result.
  a. Click Start, click computer.
  b. open the drive root that is a drive where Windows is installed.
  c. open the Program Files folder and look for GhostSurf program folder.
  d. open the program folder and launch the program by double-clicking on the boot file.

  Note: If you are able to launch the program, then create a shortcut in the startup file.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Not able to keep open programs on the taskbar.

  Original title: Windows I can't click my program on my task bar which is open, it will not appear

  I recently reset my computer Factory

  I have to click a program that is not open in my taskbar for the program to appear on my screen without minimize as it would save time instead to support a bunch of minimize buttons because I need a lot of programs open.

  Until I'm able to have a program such as photoshop and be on Google Chrome, then by simply pressing the photoshop icon he'd jump up on top of my screen that allows me to work a rhythm quicker and more efficient.

  Help, please

  Fweak

  Thank you

  Hello Fweak,

  Thanks for posting your query on Microsoft Community forum.

  According to the description of the problem after performing factory reset you are not able to open the application by clicking on the icon of these applications. Maybe there's a chance that, after the factory reset these application get removed from your computer.

  I suggest you to check whether or not this application is shown in programs and features. If she's not here, so if please install this application once more and then create the shortcut of this application. Then, you will be able to open the application by clicking the shortcut key.

  Step 1

  Check the application in the control panel.

  • Press on the key Windows + R.
  • Type appwiz.cpl in the run box.
  • Now, find the applications that you could not open.

  Step 2

  Install the application if it is not installed and display in the Panel.

  Step 3

  Try to create a shortcut for the application after installation. See the steps in the article mentioned below to create a shortcut.

  How to create a shortcut on the desktop

  Hope that the information provided is useful. Let us know if you have questions. We will be happy to help you.

  Kind regards