Not able to run the digital cable Advisor in Windows Media Center

Similar Questions

• system is not able to run the Apple Application Support service

  I can't install itunes on windows 7 32 bit. Any suggestions on Apple Support do not work. The system is not able to run the Apple Application Support service. Any suggestiones?

  Can you post the error message you get when you try to install or launch iTunes?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• I was not able to find the instructions for upgrade to Windows 10. The upgrade site says to buy a new PC.

  Original title: upgrade

  I am operating Windows Vista. I was not able to find the instructions for upgrade to Windows 10. The upgrade site says to buy a new PC. Any advice?

  Hello

  You buy Windows 10, as there is no free upgrade to Vista 10.

  https://www.Yahoo.com/tech/s/Microsoft-just-confirmed-Windows-10-pricing-everything-know-114542550.html

  Microsoft on Monday said CNET Windows 10 will cost just as much as its predecessor. This means price for Windows 10 will run anywhere from $110 for Windows 10 Home package at $199 for Windows 10 Pro edition. In addition a Pack Pro 10 will allow users upgrade Home Pro for $99.

  http://www.CNET.com/news/Microsoft-prices-single-Windows-10-licenses-at-119-for-home-199-for-Pro/

  But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

  "FAQ Windows 10.

  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

  See you soon.

• MAF: Not able to run the sample project or a simple project with only one page

  Hi all

  I am trying to run examples of applications of the MAF delivered with Jdeveloper 12.1.3. I am not able to run these applications on the device in the emulator. They gets deployed successfully. However, when I try to open these applications, it hangs on the initial screen of the Oracle.

  I even tried to create a new MAF application with only a device with a page of the AMX. Tried to deploy, but still get the same result.

  No idea what could be the problem?

  Thank you

  Ajay

  Hello

  Problem has been resolved, after the re-installation of the Jdev and MAF extension.

  Understood that somehome, maf - application.xml couldn't refer to the features of the maf - feature.xml. When I created a new feature in the MAF - feature.xml, it was the adfmf - feature.xml and maf-application creation could refer to the functionality of this file.

  This seems to me an installation problem. I have therefore re-installed, now its works very well.

  Thank you

  AJ

• Error: "failure of the decoder or not installed' when try to play a DVD in Windows Media Center.

  Original title: Dell Inspiron 1501 with Windows XP Media Edition drive d / error/defect of the decoder.

  After download of Internet Explorer 8 I now get a decoder error when you insert a DVD and Media Center. The message says 'malfunction of the decoder or not installed' and suggests to restart the computer and Media Center. This does not solve the problem. The drive is identified as Philips SDVD8820. What can I do to fix this?

  Hi Don,

  You can download and run the Microsoft Windows XP Video Decoder Checkup Utility . This utility will help you determine if an MPEG-2 video decoder, or a DVD decoder is installed on your system and if the decoder is compatible with Windows Media Player 10 and Windows XP Media Center Edition 2005.

  Hope the helps of information.

• The license page is not displayed when trying to listen to music in Windows Media Center

  Original title: I don't CAN NOT ACQUIRE FULLAUDIO LICENSE IN MEDIA CENTER POP UP STATES IT DO CAN NOT DISPLAY PAGE because I'M NOT CONNECTED to the INTERNET.  I AM CONNECTED to the INTERNET.

  Can not play music in Media Center.Pop States License page cannot not be shown cause that I am not connected to the internet. I AM CONNECTED TO THE INTERNET. OPS 7 Home premium

  Hello

  1. did you of recent changes to the system before the show?

  2 is the issue limited to play music in Windows Media Center?

  3. What is the exact error message you get?

  4. using an Extender?

  5. have you purchased online music?

  6. are you able to play music in Windows Media Player.

  If you have purchased music online, I suggest you have the license to enable it to play the music.

  Method 1:

  Follow the link below, reset the DRM and check if that helps.

  http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp?force=1

  The Player Windows Media DRM: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-DRM-frequently-asked-questions

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  Check if the same music playing in Windows Media Player, as he shares the same music library.

  Method 2:

  Follow the link below, perform the steps and check if it helps.

  Listen to music in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows7/listen-to-music-in-Windows-Media-Center

  Method 3:

  Follow the link below, perform the steps and check if it helps.

  Solve problems with an Internet connection in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-an-Internet-connection-in-window-Media-Center  (Applicable to Windows 7)

  Let us know if it helps.

• How do you get the subtitles to work in Windows Media Center Netflix?

  I have Windows 7 64 Home Premium with Windows Media Center for a Home Theater Personal Computer.  I can watch Netflix streaming movies with subtitles using IE8 or IE9 and Silverlight, but may not know how to activate in Windows Media Center.  The always cheerful and almost all means useful Netflix Customer Service says only Microsoft can manage Netflix plugin for Windows Media Center issues.

  No support to do this from Microsoft, does anyone know how to do this?

  Hi keepitsimple.

  This feature is not currently supported in Netflix for Windows Media Center. If you want to apply, you can contact Netflix to let them know:
  http://www.Netflix.com/contactus?lnkctr=cuPh&show=true
  I hope this helps.

• "created the slideshow" inside loop problems (Windows Media Center) during playback

  Why didn't Windows Media Center during playback of a repeat of the start file "slideshow created with music" and / or "loopback", with only the first 20 or so (on perhaps a 100 total on the full slideshow) slides or photos over and over again without showing the rest of the majority of the slides at all?

  Hey trasel,.

  Unfortunately, it is not possible to include another small video clip for an existing video on which you have already created.

  However, you can create a new slide and add it to the existing one.

  Check out the link below howcreate slide shows in Windows Media Center:

  http://Windows.Microsoft.com/en-us/Windows-Vista/your-pics-on-the-big-screen-create-slide-shows-in-Windows-Media-Center

  Kind regards

  Savan - Microsoft technical support.

• All the program icons have the same appearance and open Windows Media Center

  Original title: cannot start a program
  When I click on an any program icon on the Windows 7 Desktop, a window appears with its contents: suggested program to open Windows Media Center. All the programs on the desktop icons have the same appearance.

  Using Word 2007 to get an example:

  I've seen this happen when opening a program via a shortcut on the desktop (for example. LNK file), you are asked what type of program to open it with. After you select theWord (or another program) via the Select a program from a list of programs installedand checkalways use the selected program to open this type of file, the referenced by the shortcut of origin Word document opens in Word as it should.

  The problem is that now all shortcuts (for example. LNK files) on the desktop or in the Explorer will want to be opened by Word and use Word icon to display the shortcut. This is known as a file association and the default icon. The same condition can occur if you have performed these actions on one. JPG or even a. EXE, but the. LNK explanation is much more likely.

  This has happened enough that a small utility was written to cancel the. LNK file association was created. There is a registry hack to do this, but I recommend the utility unLNK for its ease of use.

  A utility to Unassociate Types of files in Windows 7 and Vista
  http://www.Winhelponline.com/articles/231/1/an-utility-to-unassociate-file-types-in-Windows-7-and-Vista.html

  Just use the utility to unassociate the. LNK files. Operating instructions are available on the web page above (the same place to get the utility).

  • If this proposal of solution solves your problem, please go back and mark as answer for others to consider.

• Not able to run the NVL function in the data model

  I tried to use NVL today in the data model, but I got the error message.
  Here's the code: -.
  SELECT ROUND (WHEN BOX: MO_TARGET_DISP_RATE > = 100)
  THEN 100
  (TO ANOTHER NVL (: MO_TARGET_DISP_RATE, 1) END, 2) AS "TARGET_PC_MO".
  
  Y at - it another option to replace NVL here... that runs in the NOSE? Thanks in advance.

  Just a suggestion, try a view then refer to the display in the data model

  (SELECT (ROUND (CASE WHEN to_number(:MO_TARGET_DISP_RATE) > = 100)))
  THEN 100
  Of OTHER NVL (to_number(:MO_TARGET_DISP_RATE), 1) END 2)), double) My_field

  The error was not a tank for the error number was or media...! If so above should be ok...

• Not able to play the game Metro 2033 on Windows Vista-based computer.

  I just installed the game Metro 2033 on my Vista system that uses a 1080 screen.  In fact, I have two identical screens.

  The game requires activation Steam and Steam normally will attempt to update the program rather than simply enable it during installation.  This leaves a person in the dark as to what happens during the installation.

  It turns out, I use a 3G modem that Steam refuses to support their network of Bit Torrent, so download speed for an update of a concert is around 12 kb/s or 8 hours to make the point on a program that has not yet installed.

  After work, I was quite surprised to find that the program would not go on Steam.  He then took a few hours to find out that there is a solution, that I could load the game by running the executable file that had been installed in the directory Steam for Metro 2033.

  Unfortunately Metro2033, when started this default way a unknown screen resolution.  Thus when the game is started from the Steam directory nested, one gets a message "out of range" on the display of 1080 and nothing can be seen.

  Short of launching the game out, I tried the game again, to my great joy, the second run displays a safe mode issue and I ran it in safe mode.  It is quite an exciting game and I played it all night.  However, I had also contacted support original THQ regarding installation problem/solution.

  Then I fell asleep.  The PC was on.

  The next day, I played the 2003 Metro game again, but I entered in some difficult areas of the game, and I had to reload the saved game.  After awhile, I opted to exit the program.  Later, I started the program, but this time I inadvertently clicked on the Metro2033 icon who had installed Steam.   In my solution, I had pasted a link to the directory of Steam under the original icon and had pressed the wrong button.

  Of course, the first thing I saw, after playing the game for 12 hours, was "out of range".  I opted to return to the office...

  ... However I couldn't come back on the Vista desktop.  I have a 7000, and even Microsoft Entertainment keyboard by pressing the buttons of Windows or Media center wouldn't let me come back to the office.

  The day before, I needed to do this that I've experienced to workaround to start getting and I noticed that the only way I could get on the desktop to run the Task Manager to kill the out of range on my screen message has been to press the Media Center button.

  Once the Media Center menu on breaking the subway 2003 menu I could then enter the office and use the Task Manager.

  However, the next day when I inadvertently started the STEAM version, and again, the screen is become black and says 'Out of Range', I found that my system was stuck in this loop.  No way to get in the Manager of tasks at all, not even with the Media center button on my keyboard.

  Now the background of my question.  When I was forced to start my system again, I noticed the normal BIOS screen and the bar of Vista with Vista is loading, then the familiar sound of Vista boot, but now NO SCREEN at all on startup!  Now, something had inserted a driver in my Vista start which forced my display say "Out of Range" from the start of the desktop of Vista and Vista computer has not yet noticed this.  Normally, I would think that they claim that the screen resolution is wrong and put it on, instead, nothing else than the out of range message rigid or flexible boots.

  Original title: can someone tell me what happened here? Metro2033 and steam game.

  I checked by plugging my second monitor.   The system has Safe Mode startup and I was able to do a restore of the system from the previous day to evening to return to the office.   However, I am quite confused as to what happened.  How the Metro 2033 problem "out of range" migrate to Windows startup by running an update of Steam?

  I use the latest service pack for Vista.

  
  

  It seems that the STEAM snuck in an update and then everything worked fine.

• Im trying to run a digital copy DVDs on windows media player and the dvd says I need an update of safety to run the dvd, how to take care of this?

  IM at the beginning of the loading of the dvd when you enter the code to download the digital copy and it says I need an update of security for windows media player I looked for a response but could not find what he wants, can someone tell me what I need to do?  I'll also be able to download film from my library to a pill once I get it transferred to my computer?

  Hello

   

  Thanks for posting your question in the Microsoft Community.

  I imagine the inconvenience that you are experiencing. I will try to help you in the matter of fixing.

  I suggest you to install pending Windows updates and check the issue.

  Follow the steps in the link below.

  Install the Windows updates in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

• the dell xps 410 with windows media center 2005 makes it be able to run minecraft?

  I have the dell XPS 410 and I can't get it able to run mine craft due to a warning on my driver is possible to run it?

  You can probably run, but you will need to provide the specific error message, without paraphrase, as well as the following system information. For more detailed advice.

  I imagine that the warning suggests that you update the driver for your video card.

  The Minecraft system requirements: http://www.minecraftsystemrequirements.com/

  CanYouRunIt: http://www.systemrequirementslab.com/cyri

  Go here and enter your service tag to find the latest Dell driver--> http://www.dell.com/support/home/us/en/19?c=us&l=en&s=dhs

  For more help here, provide your Information system specifications:

  Start > run > msinfo32.exe > OK
  Edition > select all, then edit > copy
  Paste (CTRL + V) in your answer
  Click + next to 'Components', select 'View' then
  Edition > select all, then edit > copy
  Paste (CTRL + V) in your answer

• Not able to launch the program created in c:\Windows.

  Original title: series of order details

  I put a shortcut to a program on C:\Windows, so I can type his name on Run and launch the program

  But,

  Instead, it prioritizes an incorrect executable of a program that is installed with the same name

  How to change that?

  Where in the registry is the entrance?

  Hello

  You do not enter the name of the shortcut, type the path and the name of the file to run.

  RUN: C:\Location\Programs\text.exe

  If you try to run the test.exe which is at the location named so it will only run another text.exe if
  It is located on the track first in a different location.

  Rob - SpiritX

• Always get a sign on screen when you try to play the video from Netflix in Windows Media Center

  When I try to play a video on netflix by MediaCenter, he shoots me a sign on the screen and then usually I want to type anything on the subject.  I already have my information saved, but this still happens and I can't watch anything on the MediaCenter.  Anyone know why this is happening?

  Hello

  I suggest you follow the link control.

  I also suggest you to contact Netflix support to get help on the issue.

  Limits of support for Netflix in Windows Vista Media Center

  http://support.Microsoft.com/kb/972151