Not able to read a DVD

Similar Questions

• DVD-ROM not able to read any Dvd or cd...

  Hi, my dvd rom is not able to read any disc, I can see the drive in my computer, when I insert a disc, it runs for the first time, the light shows and thn it stops completely, and when I click on the dvd icon in my computers it drive ejects, when I tried to google my problem I got to know tht, this may be due the updates for vista and the solution was to remove the upper filter or lower in the registry, I tried tht so but thn too the problem persists, try wht should I do?

  try to use the DVD rom in another IDE or SCSI port in your computer.

• Qosmio G20 is not able to read a cd after burning

  Hello

  I need help please.

  My laptop just came back from the center of toshiba. The problem is, that I can burn a cd, but after I reinsert the laptop is not able to read. It always says E: / is not accessible incorrect function. On another pc, the cd can be read perfectly. Toshoba Center says it's a software problem and we should use the recovery disc. We did this, but it's always the same.
  Please can someone help?

  Thank you

  Read your ad I didn't understand what the service does exactly, but it's really odd if this occurs after the installation of clean operating system with recovery DVDs.

  Have you installed an additional burning software?
  Have you tried burning different things on different blank media?

  Sorry, but it is not possible to give a precise answer. Tell us a little more of this.

• Tecra A3 - 152 - not able to read CD - R (or CD - RW), burned by itself or another PC

  Hello

  My TECRA A3-152 offers the CARPET * a DVD-RAM UJ - 831S player (1.40 firmware version) with the Microsoft (dated the 1.07.2001) 5.1.2535.0 driver
  The laptop is not able to read the CD - R or CD - RW engraved with any other PC (or alone). The CD is reported as empty.

  However, the reader is able to read commercial CD - R with SW or sounds or other stuff.
  After several hypotheses about the SW problems or compatibility issues, I intend to replace the drive with another.

  Any suggestion?

  Thanks - regards
  Antonio Giarrusso

  Hello

  Maybe it s only a problem of compatibility. In my experience not on each CD or DVD is compatible. I mean that not every CD manufacturing is supported by the firmware and so this question might appear.

  But let's try some common tips.
  First of all, I would recommend delete Sonic record now and the DLA.
  Then restart the computer and enter the registry.

  1. in the registry editor, expand my computer, and then expand HKEY_LOCAL_MACHINE.
  2. expand SYSTEM, and then expand CurrentControlSet.
  3. expand Control and class.
  4. under category, click on {4D36E965-E325-11CE-BFC1-08002BE10318}.
  5. in the right pane (topic area), click UpperFilters and delete. Click then click LowerFilters and delete is also.
  6. click on Yes to confirm the deletion.

  After this procedure, restart the laptop and try to read the CD

• Not able to read files audio wma

  I myself had this new cool device and everything is working fine beside it is not able to read files audio wma.
  It works without any problem on my Samsung android phone, but on my Slate7 it says format not supported in specifications indicates that it is supported.
  I installed the same player that I use on my Samsung android phone, any suggestions I should do to fix this?

  To my knowledge 4.1 Android doesn't have the necessary codec to play default WMA files. Please see the compatible audio formats listed by Android developers:

  http://developer.Android.com/Guide/Appendix/media-formats.html

  However, for me MXPlayer/VLC works to play WMA files. You can try this one, and there is no harm to try. Two of them are available on PlayStore. You can uninstall them if you don't like them or if they do not meet your needs.

• Stor.e TV 1.5 TB - not able to read .avi files

  I transferred .avi files from my computer on Stor.e tv and for some reason the icon on the left is a question mark instead of the usual.

  Not only that I am not able to read .avi files.
  The strangest thing happened only in some of the files (4) I was transferred.

  Can someone please help?
  Thank you.

  Hello

  Have you tried to repeat this procedure?
  Delete the files copied to the HARD drive and copy the files once more.

• UTL_FILE.get_line not able to read large files...

  Dear all,

  UTL_FILE.get_line is not able to read data from file. can you suggest me to fix this problem...

  Here is my code;

  declare

  l_file_handle UTL_FILE. Type_de_fichier;

  l_input_line varchar2 (6000);

  Start

  l_file_name: = 'abc.csv ';

  l_path: = ' / u02/R12UAT/apps/apps_st/appl/XXSES/12.0.0/bin';

  l_file_handle: = UTL_FILE. FOPEN (l_path, l_file_name, 'R', 32767);

  loop

  UTL_FILE. GET_LINE (l_input_file, l_input_line);

  fnd_file.put_line (fnd_file.log, l_input_line);

  end loop;

  UTL_FILE.fclose (l_file_handle);

  end;

  After reading a few lines I have a get the error;

  ORA-06502: PL/SQL: digital or value error: character string buffer too small

  I have to read data from file with UTL_FILE. Do not use SQLLDR

  Thank you.

  Kind regards

  Ravi.

  Your call to FOPEN() function specifies a size of 32K maximum line. When you call GET_LINE() without specifying the number of characters to get, Oracle will therefore assume you want to get 32K characters. However, your stamp, L_INPUT_LINE, is defined as VARCHAR2 (6000). That is, it is much too small.

  The solution is to call GET_LINE() with the third parameter set to 6000.

  BTW, you can also set a condition of release on the loop.

• PS is not able to read the files from my Olympus OM - D E - M1 camera

  I have an old Version of Photoshop, CS3, Version 10.0. Now, I bought a new camera, an Olympus OM - D E - M1, and the PS is not able to read the files. Can I download a few extend camera raw?

  Per-Erik Pedersen

  Hi Peders,

  Thanks for posting on the Adobe forums.

  This camera is supported by Camera Raw 8.2, which is available in Photoshop CS 6. Please check the following KB Articles:

  Camera Raw plugin | Supported devices

  Applications of camera Raw compatible Adobe

  Kind regards

  Sandeep

• Re: Satellite Pro A300 - not able to burn the DVD

  I am able to read a cd, I am able to record on a cd, I can read a DVD but I'm not able to record to a DVD.

  The device driver is TS-L632H - it says on the side of the DVD Player Recorder DVDs, DVD RW rewritable multi.
  I tried updating the driver but it says that it is up-to-date.

  I am trying to record to DVD RW 16 x memorex. The regional setting is correct.

  Evidence Wally assistance would be much appreciated.

  Have you tried to burn various DVDs from different manufacturers?
  No, this!

  I couldn't t burn various DVDs until I tested the TDK DVD-R my burner drives agreed this drive and I was able to burn successfully.

  Check it out!

• XNET Executive session: read frame vintage - not able to read i / c frames

  Hello

  I created Veristand Custom Device for RT PXI monitor Xnet CAN of my Test frameworks to the UUT. I use CAN map 8513. I have a problem that I could see images from to WEAR it, but not able to see the (outgoing) frames, I send to USE.

  But since my host PC (windows pxi) I used the monitor Bus Xnet - in remote mode - to monitor CAN interface in this RT PXI, when bus Xnet monitor device custom above also starts showing outgoing executives. Please help me with this.

  In the custom device - create Xnet session using '.vi XNET Create Session (frame Input Stream)' and 'reading XNET (Raw image) .vi"to read CAN traffic.

  A slightly modified version of 'https://github.com/NIVeriStandAdd-Ons/XNET-CAN-Bus-Monitor-Custom-Device' to see frames the two inbound/outbound.

  With the help of VeriStand 2014

  The people on our Board of Directors VeriStand may be able to help a little more with making a custom device.

  http://forums.NI.com/T5/NI-VeriStand/BD-p/440

  You don't know how it would work in VeriStand, but ownership XNET Echo pass? is probably what you want to use.

• WMP player not able to read files on fuse + after Real Network update

  In the evening, I received a noticed that there was actual update available. I installed it.  My fuse + was connected at the time. When it was done the options showed to read by the drive and the external card.  I tried to display to use it, but it seems to not work.  Windows Media Player also seems to not work.  I disconnected my player and plugged in.  Still not able to view files with WMP.  But, then was able to display using Real.  I don't like the actual display.  Was able to view files with explores.  Deleted in real.  Now able to see the player of fuse.  Only able to see 3 pictures on the external card.  I have 7 GB of data on a 8 GB card.

  Could be something else, but now seem to point to the actual update.

  I have a second player who still works with WMP.  I could see the files on the card with WMP when installed in my second player.  When I put it in my original drive is back to normal.

  Back to normal with no real software.  I liked Real SP.

  the real update may have changed the accociations with the "rocket" since it is try plugged in. uninstall the "rocket" in the Device Manager and then scaning for hardware changes. This should refreash installation.

• Not able to read the WSDL on the server meets premature EOF

  Hi all
  
  I am facing problem while accessing a web server Service. Here is the clear view on this subject.
  
  I created a simple process of SyncBpel in a composite and deployed on the server and it works fine. Later, I created an asynchronous bpel process in a composite and in external reference I dragged a web Service and imported from the url of the wsdl for the SyncBpel server and wired the process of Asynbpel to webserive.
  Now here I am faced with a particular behavior that I'm not able to trace it.
  (1) for the first time when I import the url of the syncBpel from the server I am not faced with an error and it works well as expected, but when I close the Jdeveloper and open it I am not able to use the web Service, and it is said that "not being able to read the WSDL of the EOF Server premature encounter."
  (2) when I close and open the Jdeveloper, I can see the url for the WSDL imported into the Web server is changing http://stcfmw03.satyam.com:8021 / soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep? WSDL to http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/BPELsync.wsdl
  (3) when I open and see the url http://stcfmw03.satyam.com:8021 / soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep? WSDL I can see the soap as address * < soap: address location = ":8021/soa-infra/services/Tarak/synchronousBpel!1.0*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c/bpelsync_client_ep"/ http://stcfmw03.satyam.com > * "
  
  I do not understand why the end of SOAP contains "* soa_5cfb8416-c106 - 40 has 2-a53b-9054bbe04b9c" and this kind of url for soap address happens to the bpel process which I am on the server deployment.
  
  I checked the in Jdeveloper where webproxy is uncheck and the server is also up, but still I am experiencing because of the mistake of reading.
  
  Can someone please help to resolve the issue.
  
  I am using SOA 11 g 11.1.1.5 and Jdeveloper 11.1.1.5
  
  
  Thank you very much.
  Tarak
  
  Published by: user11896572 on January 17, 2012 17:22

  Hello

  When a service is not deployed as a 'default' on soa-infra, we see characters such as-* soa_5cfb8416-c106 - 40a 2 - a53b - 9054bbe04b9c appended to the end.  It is better for the service references that will be deployed as default of all time.

  A service can be defined as a default value either during deployment, or by setting it manually on the em console.

  Thank you

• Satellite 2450-201-not able to play the DVD-DL

  I AM UNABLE TO READ DVD DL DISK ON MY LAPTOP.

  THE DISC KEEPS WHIRRING IN THE DRIVE BUT WILL NOT START.

  CAN SOMEONE TELL WHAT I CAN DO TO SORT THIS PROBLEM.

  Thank you.

  Hello

  The drive that was supplied with the device only supports this media:
  CD-ROM, CD - R, CD - RW, DVD-ROM, DVD-R, DVD - RW, DVD-RAM

  It seems that the DVD-DL is not supported.

• Not able to burn CD/DVDs on my Satellite P100 - 10 p

  I have a Satellite P100 - 10 p using a carpet * a burner DVD UJ-850 s. I used to be able to burn CDs and DVDs.

  No more.

  I can still read most CDs and DVDs. except a few types, where it says that the CD is empty/Virgin/new and offers to burn something on this subject. But he refuses to burn anything... CD, DVD, of a brand or type.

  I don't know exactly what caused his or when it happened (I rarely burn CD and DVD), but the approximate time is after my machine automatically upgraded to Vista Home Premium SP1.

  Apparently, I have the latest version of the driver software.

  I tried all the usual suggestions including:
  Delete upper and lower filters (there where no filter upper and lower in my registry)
  * Remove device from the list of devices and reinstall
  * Remove all software that might have interfered with the pilot

  All the world is facing this problem? And found a solution?

  Thanks in advance.

  Hello

  I had this similar problem, but after removing the upper and lower filters, everything worked again.
  Can I ask what burning applications you use?

  I use Nero and it s great!

  > I don't know exactly what caused his or when it happened (I rarely burn CD and DVD), but the approximate time is after my machine automatically upgraded to Vista Home Premium SP1.
  You said that you noticed after Windows Vista update hmmm maybe it s only a software problem

  Have you tried to reinstall the OS using the Toshiba Recovery disk? I mean it would be really interesting to know if a recovery would help

• How windows 10 go on a Aspire 571_p v5? I'll be able to read a DVD etc.?

  I am considering windows experiences 10 devoted a 571_p v5.

  Does anyone have a good sttory thereon (e.g. installation went well and windows 10 works well on this device)?

  From previous posts, I see that some people have had various questions - I just wanted to know if things were going well for everyone.  I'm good in seeing that the v5 Aspire 571_p is * not * on windows 10 supported models list (gulp) http://us.acer.com/ac/en/US/content/windows10-eligible-models?

  If I install windows 10 on this device, I will be able to for example play commercial DVDs / movies etc. without having to purchase additional software from microsoft?  Or do I have reason to assume that none of the media playing software available on the device (for example, clearfiMedia) can be re-installed in windows 10 after the upgrade?

  Thanks a lot for any help

  xteasy wrote:

  I am considering windows experiences 10 devoted a 571_p v5.

  From previous posts, I see that some people have had various questions - I just wanted to know if things were going well for everyone.  I'm good in seeing that the v5 Aspire 571_p is * not * on windows 10 supported models list (gulp) http://us.acer.com/ac/en/US/content/windows10-eligible-models?

  If I install windows 10 on this device, I will be able to for example play commercial DVDs / movies etc. without having to purchase additional software from microsoft?  Or do I have reason to assume that none of the media playing software available on the device (for example, clearfiMedia) can be re-installed in windows 10 after the upgrade?

  Thanks a lot for any help

  That model is not on the list does not mean that it is not compatible, it is enough that Acer think it must provide new drivers. There are already compatible drivers or the model is too old for it to make sense to create new drivers. In most cases, it is the former.

  Windows 10 does not natively to DVD movies. You need to add the software so that this feature to work. You don't need to buy the software from Microsoft, there are a lot of other editors, and most likely if you have a software like that already installed it will still be there after the upgrade. You can upgrade the software to the latest version before the upgrade but just to be sure.