WMP player not able to read files on fuse + after Real Network update

Similar Questions

• Not able to read files audio wma

  I myself had this new cool device and everything is working fine beside it is not able to read files audio wma.
  It works without any problem on my Samsung android phone, but on my Slate7 it says format not supported in specifications indicates that it is supported.
  I installed the same player that I use on my Samsung android phone, any suggestions I should do to fix this?

  To my knowledge 4.1 Android doesn't have the necessary codec to play default WMA files. Please see the compatible audio formats listed by Android developers:

  http://developer.Android.com/Guide/Appendix/media-formats.html

  However, for me MXPlayer/VLC works to play WMA files. You can try this one, and there is no harm to try. Two of them are available on PlayStore. You can uninstall them if you don't like them or if they do not meet your needs.

• Windows Media Player, not able to read .avi or .mp4 files

  Media Player

  My media player won't play avi or mp4 extensions files. Very frustrating can I change this?

  Hello

  All you need is good Codec - get these if 32-bit.

  -Free - CCCP also get free tool of insurgents
  http://CCCP-project.NET/

  FFDSHOW - free
  http://sourceforge.NET/projects/ffdshow/

  Check here:

  Plug-ins for Windows Media Player
  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  ---------------------------------------

  VLC needs, of no use so usually Codec as a backup when asked to support associations of files just say no.

  VLC - free
  http://www.videolan.org/VLC/

  -------------------------------------------------------------

  If 64 bits and you need codec.

  Read this 1st and go that route, or use the one below. (Vista or Windows 7)

  http://www.Vistax64.com/sound-audio/152850-Vista-codec-pack-32bit-64bit-Media-Player-codecs.html

  --------------------------------------------------------------------

  If 64-bit - can run WMP in 32 or 64 bit mode.

  Or try these: download - SAVE - go to the place where your put them RIGHT CLICK – RUN AS ADMIN.

  For 32-bit use these - OR the 32 bit ones listed above which I prefer.

  K - Lite Codec Pack 6.2.0 (or newer)
  http://www.codecguide.com/

  Use them for 64-bit:

  K - Lite Codec Pack 3.7.0 (64-bit) (or newer)
  http://www.codecguide.com/

  -------------------------------------------------------------
  You know that you use WMP 32 or 64

  Change, change or set 64 - Bit Windows Media Player 11 (WMP11) in Windows Vista x 64 as default
  http://www.mydigitallife.info/2007/01/19/switch-change-or-set-64-bit-Windows-Media-Player-11-WMP11-in-Windows-Vista-x64-as-default/

  -------------------------------------------------------------

  And you can use it when necessary because no codex is usually required.

  VideoLAN - VLC media player
  http://www.videolan.org/

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I'm not able to talk live on Facebook after that I updated my phone

  I have an iPhone 6 sec more

  Hello Nikki,

  I understand that Facebook does not have to access. If it comes to the application, you have a few options to help make it work for you.

  The first thing I would look at is to make sure that you are connected to your accounts on your iPhone. You can check this in settings > Facebook.

  Connect to social networks like Facebook and Twitter on your iPhone, iPad and iPod touch
  https://support.Apple.com/en-us/HT202605

  Some other things to try is to restart the application in Facebook in double pressing the Home button and then dragging up on Facebook. Open the app again to see if then responds. If this is not the case, take a look at the additional troubleshooting described in the article below.

  If an application you have installed unexpectedly closes, unresponsive, or does not open
  https://support.Apple.com/en-us/HT201398

  Let me know if it helps.

  Take care

• Stor.e TV 1.5 TB - not able to read .avi files

  I transferred .avi files from my computer on Stor.e tv and for some reason the icon on the left is a question mark instead of the usual.

  Not only that I am not able to read .avi files.
  The strangest thing happened only in some of the files (4) I was transferred.

  Can someone please help?
  Thank you.

  Hello

  Have you tried to repeat this procedure?
  Delete the files copied to the HARD drive and copy the files once more.

• UTL_FILE.get_line not able to read large files...

  Dear all,

  UTL_FILE.get_line is not able to read data from file. can you suggest me to fix this problem...

  Here is my code;

  declare

  l_file_handle UTL_FILE. Type_de_fichier;

  l_input_line varchar2 (6000);

  Start

  l_file_name: = 'abc.csv ';

  l_path: = ' / u02/R12UAT/apps/apps_st/appl/XXSES/12.0.0/bin';

  l_file_handle: = UTL_FILE. FOPEN (l_path, l_file_name, 'R', 32767);

  loop

  UTL_FILE. GET_LINE (l_input_file, l_input_line);

  fnd_file.put_line (fnd_file.log, l_input_line);

  end loop;

  UTL_FILE.fclose (l_file_handle);

  end;

  After reading a few lines I have a get the error;

  ORA-06502: PL/SQL: digital or value error: character string buffer too small

  I have to read data from file with UTL_FILE. Do not use SQLLDR

  Thank you.

  Kind regards

  Ravi.

  Your call to FOPEN() function specifies a size of 32K maximum line. When you call GET_LINE() without specifying the number of characters to get, Oracle will therefore assume you want to get 32K characters. However, your stamp, L_INPUT_LINE, is defined as VARCHAR2 (6000). That is, it is much too small.

  The solution is to call GET_LINE() with the third parameter set to 6000.

  BTW, you can also set a condition of release on the loop.

• PS is not able to read the files from my Olympus OM - D E - M1 camera

  I have an old Version of Photoshop, CS3, Version 10.0. Now, I bought a new camera, an Olympus OM - D E - M1, and the PS is not able to read the files. Can I download a few extend camera raw?

  Per-Erik Pedersen

  Hi Peders,

  Thanks for posting on the Adobe forums.

  This camera is supported by Camera Raw 8.2, which is available in Photoshop CS 6. Please check the following KB Articles:

  Camera Raw plugin | Supported devices

  Applications of camera Raw compatible Adobe

  Kind regards

  Sandeep

• my WMP is not able to play videos, he says he has an extention of .bup

  my WMP is not able to play videos, he says he has an extention of .bup

  my WMP is not able to play videos, he says he has an extention of .bup

  ===================================
  . BUP is not a video file... check the following links for information:

  What is on a DVD?
  http://Server4.doom9.org/index.html?/DVD-structure.htm

  How to play VOB / IFO / BUP files
  http://www.Afterdawn.com/guides/archive/how_to_play_vob___ifo___bup_files.cfm

  Video files on a DVD have the VOB extension. If you
  have a problem to play the VOB files... try renaming them
  .mpg or .avi.

  If you copy the entire folder VIDEO_TS from the DVD...
  You can play easily with the free VLC Media Player...
  just right click the VIDEO_TS folder and from the menu
  choose... 'Play with VLC media player '.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.videolan.org/

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Tecra A3 - 152 - not able to read CD - R (or CD - RW), burned by itself or another PC

  Hello

  My TECRA A3-152 offers the CARPET * a DVD-RAM UJ - 831S player (1.40 firmware version) with the Microsoft (dated the 1.07.2001) 5.1.2535.0 driver
  The laptop is not able to read the CD - R or CD - RW engraved with any other PC (or alone). The CD is reported as empty.

  However, the reader is able to read commercial CD - R with SW or sounds or other stuff.
  After several hypotheses about the SW problems or compatibility issues, I intend to replace the drive with another.

  Any suggestion?

  Thanks - regards
  Antonio Giarrusso

  Hello

  Maybe it s only a problem of compatibility. In my experience not on each CD or DVD is compatible. I mean that not every CD manufacturing is supported by the firmware and so this question might appear.

  But let's try some common tips.
  First of all, I would recommend delete Sonic record now and the DLA.
  Then restart the computer and enter the registry.

  1. in the registry editor, expand my computer, and then expand HKEY_LOCAL_MACHINE.
  2. expand SYSTEM, and then expand CurrentControlSet.
  3. expand Control and class.
  4. under category, click on {4D36E965-E325-11CE-BFC1-08002BE10318}.
  5. in the right pane (topic area), click UpperFilters and delete. Click then click LowerFilters and delete is also.
  6. click on Yes to confirm the deletion.

  After this procedure, restart the laptop and try to read the CD

• Not able to write files to CD or DVD

  I'm not able to write files to CD or DVD. When I go to DVD - RAM (d :)) properties, I see only the following titles: general, AutoPlay, material and sharing.) I used to see a record position, but now he isn't. How do I restore to open and activate the recording function? I use Windows XP Home Edition with Service Pack 3. Drive: HL-DT-ST DVDRAM GMA - 4082N. Please advice. Thank you.

  Hi mark,

  · You receive an error message or error code when you try to burn a CD/DVD?

  · Do you remember recent changes made to your computer before the show?

  I suggest you to run the troubleshooter from the link below: your CD or DVD cannot read or write media:http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us

  You can also check the links below: CD - R or CD - RW drive is not recognized as a recordable device:http://support.microsoft.com/kb/316529

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD:http://support.microsoft.com/kb/321641/

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player not able to burn the 80 minutes of audio

  MEDIA PLAYER NOT ABLE TO BURN THE 80 MINUTES OF AUDIO ON CD.

  I want to burn a 77-minute cd in media player and can not.   I add a playlist to the burnlist and Monte total autonomy than 77 minutes.  I use a 80 minute cd.  Media player automatically moves the last two songs on my playlist of 77 minutes and registered the disk "next".  I want to record the 77 minutes of music on a single cd.  Any suggestions?

  flustrated1, you use Windows Media Player to burn a CD, and if so, what is your WMP version? Where exactly did you select CD burning without gaps ? As far as I know, only WMP 12 supports CD burning. Tim Baets
  http://www.BM-productions.TK

• Qosmio G20 is not able to read a cd after burning

  Hello

  I need help please.

  My laptop just came back from the center of toshiba. The problem is, that I can burn a cd, but after I reinsert the laptop is not able to read. It always says E: / is not accessible incorrect function. On another pc, the cd can be read perfectly. Toshoba Center says it's a software problem and we should use the recovery disc. We did this, but it's always the same.
  Please can someone help?

  Thank you

  Read your ad I didn't understand what the service does exactly, but it's really odd if this occurs after the installation of clean operating system with recovery DVDs.

  Have you installed an additional burning software?
  Have you tried burning different things on different blank media?

  Sorry, but it is not possible to give a precise answer. Tell us a little more of this.

• Bootcamp - Windows 10 should not see or read files from the disk HARD Apple intern.

  I have just successfully Windows 10 next OS X on my 15 "Macbook Pro mid-2014.

  Windows 10 should not see or read files from the disk HARD Apple intern.

  Should which driver I uninstall?

  On OSX, if the following Terminal command produces any output, then you cannot read partition OSX on the side Windows? FileVault2 will also disable access to the OSX partition.

  Cs diskutil list

• DVD-ROM not able to read any Dvd or cd...

  Hi, my dvd rom is not able to read any disc, I can see the drive in my computer, when I insert a disc, it runs for the first time, the light shows and thn it stops completely, and when I click on the dvd icon in my computers it drive ejects, when I tried to google my problem I got to know tht, this may be due the updates for vista and the solution was to remove the upper filter or lower in the registry, I tried tht so but thn too the problem persists, try wht should I do?

  try to use the DVD rom in another IDE or SCSI port in your computer.

• Not be able to share files and folders over a network home

  I am more able to share files and folders across a network, consisting of a Windows 7 and Windows XP computers, and a Samsung TV. I have a number of files and folders that I can see on all devices. I followed the process of file sharing in Windows 7. When I do the final step, it I cannot click on the share button as the window disappears when I click on Add. I even put other files in a folder that I see on other devices. I can see the original files, but not the file that I just added. When I right click on the properties of a file or folder, the sharing tab does not exist even if I tried to share it. What Miss me? Thank you

  Hi Petem,

  1. which antivirus program is installed on the computer?
  2. don't you make changes to the computer before the show?

  This problem may occur if the firewall blocks or settings for file sharing is not properly activated.

  Method 1: I suggest you try the steps from the following link:

  Sharing of files and printers

  http://Windows.Microsoft.com/en-in/Windows/sharing-files-printers-help#sharing-files-and-printers=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2: Disable the antivirus
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Microsoft does not recommend that you disable the antivirus protection in most conditions. Disable the antivirus protection that temporarily to restore a computer.

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.