not able to restore System 32 exe

Similar Questions

• Not able to restore iphone6 due to error code "latest version of itunes is not installed", however the latest version of itunes is installed.

  Not able to restore the iphone 6 due to the error "latest version of itunes is not installed", however itunes version 11.4 is installed.

  11.4 is not the latest version of iTunes.

  12.4.3 is the latest version of iTunes.

  It requires Windows 7 or later or OS X 10.8.5 or higher.

• XP sp 3 order restore system restore. Reports, not able to restore the (date) _

  recently installed program of care 3 Advanced System. clean registry, short cutting etc. with apparent problem. correlation? suggestions? I already "canceled" pre cleaned State .even no joy will not restore?  reload XP OS and start @ square one?

  System Restore didn't work before installation produce of the care system?

  Did you install a free or paid version of ASC?

  I suppose it does not really matter, but what problem have you requiring you to use the system restore or if you are just practical (it should still work).

  What is your system brand and model?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  Depending on what you use for malware protection, you will maybe disable the product temporarily, make the system restore and then turn on the product.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  The scans by operating clean, reboot, test and we can fix any other issues.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!
  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Freeze the deployment staging and not able to restore

  Hello
  
  I was testing workflow ATG, so I created a product inside the rootCategory, approved at the staging and sent to deploy... but... I forgot to create a Parent category, so I created another project and created this category inside the rootCategory and sent to deploy, but ATG said that conflict and that's right, firstly of the updated project rootCategory and second project too, so I rolledback and remove the second project.
  
  So far everything is fine, but the problem is... Now, I am not able to aprove firstly of the project to the production or staging cancellations, I can't help with this project and to the administration Console, there is no error. And with that I can't do any other response to locking conflicts cause of deployment happens.
  
  I checked with the administration Console (deployment, Administration) > overview > staging > projects and is my first project to "deploy active projects for site: staging ' but I'm not able to select one project it y to a restore, the box are disableds.
  
  What do I have to restore this project than stuck at deployment of the staging without error?

  Can you check preview > Production > Plan tab to see if the project is waiting?

• not able to restore or turn off my ipad mini3.

  Not able to type password.or anything.please select help.now I m not able to open my ipad.

  Try a simple Reset: hold down the Home and Power buttons until you see the Apple logo (15 to 20 seconds).

  If this does not help, give us more details about what you are doing and what is happening.

• BlackBerry smartphones, I can not able to restore my contacts

  My Curve 8520 lost contacts, now I have a backup in my laptop, but I can't able to restore it. It is gray... Help me

  Hi ijas07,

  You experience this problem restore contacts only? Have you previously configuration of the synchronization wireless contact with one of your e-mail accounts? If this is the case you can try to remove the synchronization service book for that email account and try again. This article should provide more information. http://bbry.lv/lsuOHi

• Failure of the BIOS. Not able to restore

  Hello the HP support team,

  My friend's computer BIOS seems to be dead. When I turn on the CapsLock flashing for 2 times and nothing happens on my screen. I tried to remove the battery and the power cable for a few minutes, but nothing has changed. I also removed the CMOS battery and replaced it's RAM, but still had the same problem.

  I looked for solutions on everywhere and most of the time I finally get stuck on this page. The combination of WIN + B seems to have no effect, which makes sense because I'm pretty sure that they have deleted the partition HP_TOOLS.

  Here is where I need your help. In the above mentioned page, he said that "that a USB key with a HP_TOOLS volume can be used as an alternative. I really searched everywhere, but I can't find how to create this USB key. Also, I do not know where to find one extracted BIOS version so that I could restore from that. The only BIOS I get from the driver page is a ".exe" to run on this computer, which is impossible.

  One last thing to mention is that I downloaded the "sp61632" which gives me "HP Support UEFI environment Setup". When I try to install it on 'USB Flash Drive', it gives me an error, but finally I installed it locally on my computer and then transfer files on a USB key.

  I renamed this player to 'HP_TOOLS', and only files in there are "Hewlett-Packard" > "SystemDiags" and there are 8 elements:

  • CryptRSA.efi
  • CryptRSA32.efi
  • SystemDiags.efi
  • SystemDiags32.efi
  • SystemDiags.s09
  • SystemDiags.sig
  • SystemDiags32.s09
  • SystemDiags32.sig

  Just mention, cause the total size is 2.5 MB and I do not see if thishas anything to do with the BIOS to restore.

  So, to summarize, I need:

  1. BIOS recovery files
  2. a way to create the USB stick with HP_TOOLS
  3. Another idea or suggestion would be welcome

  Tried, but did not work:

  1. Restart
  2. Remove the HARD drive
  3. remove the CMOS battery
  4. replace the Rams
  5. Combination of WIN + B
  6. Combination of WIN + B, with the mentioned flash above connected drive

  The computer is: HP Pavilion DV6-2117 ev (page pilot is here)

  Serial number: (Personal information)

  Product number: WB331EA #B1A

  Operating system: Probably of Windows 7 (I do not think that this has a significance right now)

  Sorry for the long post, tried to be as detailed as possible.

  Thanks in advance for your support.

  If the following procedure does not then your choice is:

  Ask HP to replace the BIOS chip. have a third party company BIOS replace the chip or replace the notebook after the recovery of data from the hard drive.

  

• Someone can help me when closed Firefox randomly it deletes all cookies and cache, and I'm not able to restore the lost tabs...?

  For some time now, Firefox stopped randomly for unknown reasons. Sometimes, windows reports the error, but not always. When I launch Firefox upward once again, it does not restore my tabs. Also as a bonus, it deletes the cookies and cache, and I don't know why. In addition, this event became more frequent. Just in the last hour along before writing this complaint, Firefox crashed three times that I have change user, but not every time I went. I'm a taboholic, addicted to the tabs, sometimes 70 +, and it's the final straw. This frequency became more important a few days ago. When it crashed first, Windows has had enough let me know the error first one or two weeks ago. It has become the scourge of my internet browsing very. Someone please help, or I have to renounce my allegiance to Firefox and switch to the dark side which is Crome.

  ... or I have to renounce my allegiance to Firefox...

  There is no oath of citizenship involved by the use of Firefox, it's a piece of software.

  Look, if Firefox is not generate incident reports, more likely to have an operating system or a hardware problem. If Firefox generates incident reports, you can retrieve this information and display numbers report here.

  https://support.Mozilla.com/en-us/KB/Firefox+crashes#Getting_the_most_accurate_help_with_your_Firefox_crash

  Type of Subject: hangs in the URL bar and press ENTER.
  Click on the hyperlinks to display the pages of the Crash report and copy' only paste the URL of each of these reports in the message here box. Let's see if we can help figure you out what is causing those who fails to happen.

• T520 was not able to restore from image usb

  Hello

  My T520 could not restore windows 7 image usb

  I downloaded the 3 parts of the 32 bits of windows 7 on the site of HP to restore my client light t520.

  and as it starts on the usb it defective and get the black screen with:

  Windows could not start...

  status 0Xc000000f

  initialization failed because the device is not accessible

  someone has an idea?

  Found the soultion

  You must create the image of usb drive to a computer with 32-bit operating system and no 64-bit if you make an image of windows 732-bit version.

• W32Time is not able to synchronize system clock. How can I fix it?

  W32Time has constantly appears in the viewer the same because he has been unable to synchronize the time system. I get this message:

  Event type: error
  Event source: W32Time
  Event category: no
  Event ID: 29
  Date: 04/05/2011
  Time: 06:00:36
  User: n/a
  Computer:
  Description:
  The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible.  No attempt to contact a source will be 15 minutes. NtpClient has no source of accurate time.

  And this one:

  Event type: WARNING
  Event source: W32Time
  Event category: no
  Event ID: 36
  Date: 29/05/2011
  Time: 15:04:24
  User: n/a
  Computer:
  Description:
  The time service has not been able to synchronize the time system 49152 seconds because none of the time providers has been able to provide a usable time stamp. The system clock is out of sync.

  This causes some problems for me. I can't interact with processes on my computer or on remote servers that require a precise timestamp. Help, please.

  Thanks for the info. The fix is really old and since I update my computer regularly, I probably downloaded several times over the past three years.

  I took a different time server and I'm hoping that solved the problem.

  Thanks for responding.

• Please can someone help with: __Windows can not find C windows system rundll32 exe?

  I don't have a windows xp disc

  Hello Alcocer,

  Thank you for your message.  Click HERE and try a system restore to an earlier date when everything worked correctly.  If this does not work, you need an XP disk to run a repair of the system.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I was not able to restore my data due to code 0x80070005

  This is the photo of the window!

  

  need help!

  Like this?

  

  Describe your current situation of antivirus/antimalware.

  It is likely that you use for the protection of the VA is to 'protect' your system which is causing the system to fail restore, you will need to temporarily disable or start your system in Mode safe, so AV programs are not running (I hope), then run your system restore.

  Most AV companies need notes and advice on their own support pages that will tell you how to do that in order to check their pages support or community of users for help that you need more.

  Error messages like the one ending in 0005 are denied access or permissions (from the old days of BACK) problems.

• Not able to restore the entire video.

  This happened to me before, and I had to abandoned the other projects because I couldn't find answers to this.

  Problem:

  When I go to restore, it will make the first two clips and music, but when it gets to the main part of editing the video, he refuses to return. I can't find the error he gave me, but it was something you need 2 or more images to display, so that an error saying something about my publication size and too big or too small. I followed the tutorials, but nothing works for me. I will provide you the screenshot to show my problem.

  

  The red line is where it stops to make.

  Without any error message or of a more complete description of your workflow and your computer you'll first of all your model of troubleshooting. Here is how to do this.

  The first thing we do is to select all the layers that extend on the timeline when the rendering fails. It seems to me like the solid black and the two adjustment are the only layers that are active when the computer breaks down. With these selected layers, press U twice to reveal all the modified properties of the layers. It seems that you have Magic Bullet Looks applied for the adjustment layer that has a few properties revealed. There must be something inside your comp or something I do not understand is happening with the solid black. You didn't do a very good job to label your timeline so anyone can understand what is happening.

  When you have all changed properties revealed try setting your workspace to begin just before it fails and then end just seconds after these layers of problem start and run a test rendering using just the work area if you get another failure and then start to turn off the effects or reset the properties one by one until you find what is the cause of the problem and then report. It could be anything.

  If you do not get a failure of rendering with the shortened work area, and then something happens in the first part of the timeline that is gobbling up your memory. You will find the changed each layer properties and start turning things at once to find out what is happening.

  Yet one thing and this should have been my first comment. Make sure that the AE and all your belongings are up-to-date.

• error of Tivoli storage manager... not able to restore the file using rman

  Hi all
  
  I have one using AIX 64-bit os and oracle database 10g LF. I also use BR * tools and Tivoli Storage Manager for backup and storage. During the restore operation, I'm more error.file not restored to the Library Manager server...
  
  
  
  ERROR:
  Interface between BR * tools and Tivoli Storage Manager
  -Version 5, exit 4, change 0.1 for AIX 64-bit LF -.
  Version: 304B updated January 15, 2007
  (c) Copyright IBM Corporation, 1996, 2007, all rights reserved.
  
  BKI2027I: TSM-API version 5.4.0.0 using (compiled with 5.3.0.0).
  BKI2000I: Connected to the ProLE on port tdpr3ora64.
  BKI0005I: Start of the program at: Thu Dec 20 14:05:31 PAKST 2011.
  
  
  -Settings-
  Input file: / tmp/eaaBLimie
  Profile: /oracle/PEP/102_64/dbs/initPEP.utl
  File: /oracle/PEP/102_64/dbs/initPEP.bki
  Manual sorting file: disabled
  Trace file: disabled
  TraceFlags: disabled
  Parallel sessions: 2
  Multiplexing of files: disabled
  Compression of RL: disabled
  Output error: disabled
  LOT: disabled
  Buffer size: 131072
  Mode copy buffer: SIMPLE
  Redologcopies: disabled
  Release management: disabled
  Backup type: unknown
  Logs TSM server: disabled
  TSM server: 192.168.100.147:PPLTSMSRV with 2 sessions configured
  The TSM client node: PEPSRV01
  For the backup days: Mon Mar sea game Fri Sat Sun
  Backup mgmt class: MDB
  Class mgmt Archiv: MLOG1 MLOG2
  
  
  BKI5016I: Time: 20/12/11 14:05:42 new TSM session created: MGMNT CLASS:, TSM-Server: 192.168.100.147:PPLTSMSRV, type: SIMPLE
  BKI0027I: Time: 20/12/11 14:05:47 subject: 1 current 1: /oracle/PEP/sapbackup/behjszif.aff size: 67,991 KB, MGMNT-CLASS: MDB, TSM-server: 192.168.100.147:PPLTSMSRV.
  BKI0101I: Please enter 'c [have]' to continue or [high] "to cancel.
  s
  BKI0102I: Your answer: of '.
  BKI5010E: Error of Tivoli Storage Manager:
  ANS1314E (RC14) currently unavailable data file on the server
  * (RC = 14). *
  BKI1230E: The following file was not processed: oracle/PEP/sapbackup/behjszif.aff.
  
  #ERROR /oracle/PEP/sapbackup/behjszif.aff
  BKI1215I: Average transmission speed was 0.000 (0.000 MB/sec) GB/HR.
  BKI0020I: End of program: Thu Dec 20 14:07:27 PAKST 2011.
  BKI0021I: Duration: 01 min 56 sec.
  BKI0024I: Returns the code is: 2.
  BKI0024I: Returns the code is: 2.
  Press ENTER to continue...
  
  
  
  I am bit confused which... Why this error coming... for no matter what eror (RMAN) database... or due to an error of tivoli. Help, please...
  
  Published by: dbaforu on December 21, 2011 12:22

  Read the error message carefully
  especially the first line

  BKI5010E: Error of Tivoli Storage Manager:
  ANS1314E (RC14) currently unavailable data file on the server
  (rc = 14).
  BKI1230E: The following file was not processed: oracle/PEP/sapbackup/behjszif.aff.

  Not an Oracle error. IBM also has support forums.

  ------------
  Sybrand Bakker
  Senior Oracle DBA

• Not able to restore the backup of the files.

  Original title: windows vista backup and restore

  When I did a recent windows backup on the backup windows and restore on my windows vista-based computer, it completed the backup without problem. But when I open several of these files, they show a zip file and when I open these zip files open on the windows photo gallery.

  It never happened to me before. All previous backup files were normal backup files.

  my previous posting of this question, certain we tried to help me with this problem. I tried what they suggested, but the problem is still there. Could someone help me with this problem to why this is still happening. As I have said that I have no problem making a backup to backup and restore windows, now the new backup file is a zip file and try to open up on top of the windows photo gallery

  Thank you

  I discovered that I had a number of virus on my computer. has taken my computer repair and solved my problem to backup windows.