I was not able to restore my data due to code 0x80070005

Similar Questions

• XP sp 3 order restore system restore. Reports, not able to restore the (date) _

  recently installed program of care 3 Advanced System. clean registry, short cutting etc. with apparent problem. correlation? suggestions? I already "canceled" pre cleaned State .even no joy will not restore?  reload XP OS and start @ square one?

  System Restore didn't work before installation produce of the care system?

  Did you install a free or paid version of ASC?

  I suppose it does not really matter, but what problem have you requiring you to use the system restore or if you are just practical (it should still work).

  What is your system brand and model?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  Depending on what you use for malware protection, you will maybe disable the product temporarily, make the system restore and then turn on the product.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  The scans by operating clean, reboot, test and we can fix any other issues.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!
  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• T520 was not able to restore from image usb

  Hello

  My T520 could not restore windows 7 image usb

  I downloaded the 3 parts of the 32 bits of windows 7 on the site of HP to restore my client light t520.

  and as it starts on the usb it defective and get the black screen with:

  Windows could not start...

  status 0Xc000000f

  initialization failed because the device is not accessible

  someone has an idea?

  Found the soultion

  You must create the image of usb drive to a computer with 32-bit operating system and no 64-bit if you make an image of windows 732-bit version.

• Since the last refresh of my payment for Adobe enjoy cloud data, I was not able to use the software, not Eve open one of the applications, even the payment has been made and saved to my banck account. I have been a month without service and I

  Since the last refresh of my payment for Adobe enjoy cloud data, I was not able to use the software, not Eve open one of the applications, even the payment has been made and saved to my banck account. I have been a month without service and I've not found a way to communicate directly with any responsible for Adpbe, nor received any satisfactory support of any kind. How can solve this problem? Is it possible to have a personal contact to have a personal support, instead of a jungle of pages on the web that will lead you to more of the same pages?

  The CC is waiting for bank payment, if payment is declined then CC will be suspended.

  Concerning

  Stéphane

• Microsoft C++ runtime error. When I am downloading World Of Warcraft. Resources Windows Protection found corrupt files but was not able to fix some. Details are provided in the CBS.log newspaper. (I ran sfc/scannow in the command window twice)

  I am trying to download the demo version of 'WoW' World of Warcraft. I get to the part where he is configing its parameters to my computer and get a runtime error that something caused my program is complete. I read the other posts which had similar problems so I ran sfc/scannow in the command prompt window. It reads...  Resources Windows Protection found corrupt files but was not able to fix some. Details are provided in the CBS.log newspaper. I've shortened, but it is easy to understand that there is a question that the scan will not fix. I tried to access the CBS.log newspaper and opened a text doc, that was a bunch of YYYYYYYYY. I'm a little lost here and my 10 free WoW trial days is weathering away without me =)

  Please help, thanks
  

  Borrow a Microsoft Vista DVD(not Dell, HP, etc Recovery DVDs) to do a repair installation

  If you see a startup Neosmart repair disk download here, this is NOT what you want.

  You want a good Vista DVD that contains the operating system files.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you need a recovery media for your laptop back to factory settings, read this info:

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• Question... I was not able to take tab FireFox Mode... you have eliminated the possibility of moving from a 2 window... If not what should be checked in t

  Question... I was not able to take tab FireFox Mode... you have eliminated the possibility of moving from a 2 window... If not, what needs to be checked in the menu options for mode 2 window window... I use Version 23.0.1

  Hi gordie, you could use an addon to restore this configuration of the user interface: https://addons.mozilla.org/firefox/addon/hide-tab-bar-with-one-tab/

• I bought a used under Windows XP SP2 desktop computer. I need to upgrade to SP3 to run MS Office Home and Student 2010. I was not able to be upgraded. Help!

  I bought a used under Windows XP SP2 desktop computer.  I need to upgrade to SP3 to run MS Office Home and Student 2010.  I was not able to be upgraded.  Help!

  If I where to install SP3 I would choose to download the
  file and don't use automatic updates.

  Where to download the SP3 Setup file:
  (The file is large but only installs the components required by your PC)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=en
  OR http://www.microsoft.com/en-us/download/details.aspx?id=24

  How to obtain the latest Windows XP (support CD or download) service pack
  http://support.Microsoft.com/kb/322389

  Your computer must be at least level SP1 or SP2 SP3 will not be
  install on XP Gold.

  I would also create a "save image" of my front disc
  to install SP3 just in case you have problems.
  Not having any Image backup software:
  Try the 'True Image' (has a 15 day trial version available)
  http://www.Acronis.com/homecomputing/products/TrueImage/

  If you use a third-party firewall brand, of course, it is up to date (latest version)

  Install SP3 in mode "clean boot":
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Overview of Windows XP Service Pack 3
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=68c48dad-BC34-40be-8d85-6bb4f56f5110&displaylang=en
  Don't forget to download and read the file titled "overview of Windows XP Service Pack 3"
  Note: "you can run the package of SP3 update on any edition of Windows XP SP1 or SP2."

  The space of hard disk required for Windows XP Service Pack 3
  Describes the space of hard drive required for installation
  Windows XP Service Pack 3 (SP3)
  "For a PC on which Windows XP is already installed"
  http://support.Microsoft.com/kb/947311/en-us

  Install Windows XP Service Pack 3 (SP3)
  http://TechNet.Microsoft.com/en-us/Windows/cc164204.aspx

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929/en-us

  List of fixes included in Windows XP Service Pack 3
  http://support.Microsoft.com/kb/946480/
   
  Steps to take before you install Windows XP Service Pack 3
  Recommend the steps to take before you install Windows XP Service Pack 3.
  Also includes troubleshooting information.
  http://support.Microsoft.com/kb/950717/en-us

  J W Stuart: http://www.pagestart.com

• Recently, I got the following virus. Win32/Sirefef.DAtrojan, I was not able to connect to the internet since then.

  Original title: Win32/Sirefef.DAtrojan

  Recently, I got the following virus. Win32/Sirefef.DAtrojan

  I was not able to connect to the internet since then.
  Y at - there someone who can help me with the connection to the internet?
  I have a Dell XPS600
  Microsoft XP Professional

  Hello

   
  1. what happens when you try to connect to the internet?
  2 - is confined to the browser Internet Explorer problem?
   
   
  I suggest you perform a full scan of the system.
  Here is a link that will give you know how
   
  Perform a full scan of the system:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
   
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Help and Support was not able to start

  When I open help and Support Windows, it shows me the following error message:

  "Help and Support was not able to start
  For more information, contact your system
  administrator or visit
  http://windowshelp.Microsoft.com.
  
  
  (I'm the system administrator only)
  I am facing this problem for more than a year.
  System details:
  
  
  Windows Vista Edition Home Premium SP2 32-bit
  Internet Explorer version 9

  Hi Aditya,

  This could be caused by the virus or corrupted system files on the computer.

  Follow the following troubleshooting methods:

  Method 1:

  Download Microsoft Safety Scanner, then scan your computer for viruses and malware then check how it works.

  You can download Microsoft Safety Scanner from the link "scan to Microsoft Security.

  Note:  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. All data that are infected must be cleaned only by deleting all of the data, which means that there is a risk of data loss.

  Method 2:

  Run System File Check to fix the corrupted system files and then check how it works.

  See the link "How to use the file system tool Checker to troubleshoot system missing or damaged files on Windows Vista or Windows 7" to run the System File Check.

  Note: It can ask the Windows DVD difficulty and allowing SFC to do more than minor repairs. Could some of the files saved on your computer are deleted when fixing corrupted files.

  If the problem persists, please answer. We would be happy to help you.

• I was not able to receive the Windows Update since February 2012. I have a Code error 80070005.

  Error code 80070005

  I was not able to receive the Windows Update since February 2012. I have a Code error 80070005. What can I do to fix this?

  Hello

  Have you made changes on the computer before this problem?

  
  Try the following Microsoft article and see if it helps.
  
   
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update: http://support.Microsoft.com/kb/968003 
  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

• I was not able to get Microsoft Security Essentials to work.

  After I installed Windows 7 Pro, I did have much of chance things will work properly or even to make the computer recognize the hardware, etc... But my biggest concern is that I have not been able to get Microsoft Security Essentials to work. I was not able to remove the non-working existing out of my system M.S.E.... I would greatly appreciate any good suggestions... Thank you

  Original title: Microsoft 7 Pro problems

  Hi Gordonaumick,

  I apologize for the inconvenience. I appreciate if you could help me with more information.

  1. What is the exact problem you face on Microsoft Security Essentials (MSE)?

  2. you receive an error message/code when using MSE?

  3. what equipment you are unable to recognize on Windows 7?

  Check that you have removed all other anti-malware real-time products that were already installed on your PC, including free products / trial that were installed when the PC was purchased (Norton, McAfee, TM, AVG, OneCare, Malware bytes (paid), etc.).

  Note: If you use more than one antivirus or antispyware program at the same time, your PC may know a decrease in performance, become unstable, or restart unexpectedly. Before you install Microsoft Security Essentials, or if you want to solve problems with Microsoft Security Essentials, including the update of issues, you must first completely remove your PC Internet security programs.

  You may have to uninstall/reinstall MSE. You should be able to remove MSE of the Control Panel. Uninstall problems see: http://answers.microsoft.com/en-us/protect/forum/protect_start/uninstalling-mse/a63b8c4b-58ed-437e-8086-fa08d80725a4

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Recommend that you restart the computer to ensure that the uninstall is complete. You can download a new Installation of MSE file from http://windows.microsoft.com/en-US/windows/security-essentials-download

  Response with more information to help you.

• Windows Update was not able to verify the new updates for the last 30 days, go to windows update to resolve this problem

  Hi people

  I'm on Windows 8, and in these last days, I get this message

  " " Windows Update was not able to verify the new updates for the last 30 days, go to windows update to resolve this problem"

  It is on a blue banner that goes directly to the screen and it is very annoying

  I get updates through so I do not understand this

  Any help would be great

  PS I have tryied the restoration of the system, and it's always the same

  Lee was soon

  Original title: looking for some help please

  Hi Lee,.

  I had this same problem and it drove me crazy, but I solved it.

  I clicked on the link above that 'Shubham Chin"gave, and in this link all the topic, if you click on the topic" my PC is not responding all by searching for the or to install updates.

  below that it will then say "try to run windows update convenience store", click on that and it should get rid of this very annoying pop to the top and other problems with your laptop... hope I helped :)

• Not able to restore iphone6 due to error code "latest version of itunes is not installed", however the latest version of itunes is installed.

  Not able to restore the iphone 6 due to the error "latest version of itunes is not installed", however itunes version 11.4 is installed.

  11.4 is not the latest version of iTunes.

  12.4.3 is the latest version of iTunes.

  It requires Windows 7 or later or OS X 10.8.5 or higher.

• I use a mac pro 2x3GHz. I don't know what I did, but since a few days I was not able to play videos from web sites like youtube. Can you help me

  I use a mac pro 2x3GHz. I don't know what I did, but since a few days I was not able to play videos from web sites like youtube. Can you help me?

  Hello joebat,

  It seems that some of your plugins (Shockwave Flash 10.1 r102) might be buggy or obsolete. To check for updates, please visit the plugincheck page. If this does not resolve the problem, try to start Firefox with the disabled modules and see if it helps at all. If so, delete the Shockwave Flash plugin and maybe reinstall or uninstall Firefox and do a new clean install.
  If that is not yet solved the problem, try the following troubleshooting steps: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html

  Thank you for your patience and please let me know how it goes.

• I can get the signed to Hotmail, but I can't read my mail. Sorry, there is a problem with Hotmail right now Hotmail was not able to complete this application. Microsoft may contact you regarding any issue you are reporting.

  There are ten days began to have problems with Hotmail. Could isgn in but get the following message is displayed.
  Sorry, there is a problem with Hotmail now
  Hotmail was not able to complete this application. Microsoft may contact you regarding any issue you are reporting.
  I can email again and again my contacts but thats all.
  I then tried to do with Internet Explorer and it works fine. I don't like it is because I have problems with some Web sites.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode