Not able to use VLC MXE converted files are in mp4 format
Someone had a little luck converting a file to mp4 using VLC and then publish the video in the show and share with the use of a MXE?
I can take a vob file, RIP into a mp4 using VLC file and the file is not published in SnS, but will play in VLC.
I can take a vob file, RIP into a mp4 file using another program and the file will be published in SnS.
Because VLC is such a standard and free, I need to understand why he corrupts the files so that they cannot be used with SnS. I tried all the different profiles that come by default with the VCL.
A final is strange; I can take the VCL converted to mp4, run it of my other program for the re - convert and this new converion will play in SnS. If all the data is there in the original conversion, simply not usable by the SnS.
And a fact more; The VCL converted mp4 will not play in Real player, Quicktime, or Helix Media Library.
For me, it's just strange that a program like VLC, which is pretty much a standard, is to change a file to where it runs only in himself.
Hi Ken
VLC is not good for video converter, if you are looking for a good program, you can find the program format factory and this program is free and can convert may formats.
Thaks
Please note for all relevant information
Tags: Cisco Support
Similar Questions
-
I don't have a windows recovery disk and my computer is affected by virus now, I am also not able to downloat antivirus because some files are missing please notify
Please see: How to replace the lack of software Microsoft Carey Frisch
-
I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web. Please, let me know how can I use this font for my project.
Thank you
Anton
Unless the site you develop is for the Asian market, I don't know why you want to use that particular font. The Basic, standard and digital alphabet punctuation glyphs has sans serif, Roman characters, but the rest is thousands of Kanji characters. While you can use the font .ttf and .otf and web fonts, it would be very unusual to use one so great. Pages should load quickly and 78 MB, with a value of faces to download for those who have connections slow Internet is not fast.
I would take a different font without serifs. There are literally thousands who look identical or virtually identical to Yuanti.
131 free and high quality without font serif to choose here. I'm sure you can find a desired.
-
MSN TECH SAID TELL WINDOWS CE PROBLEM I am STICK - not able to use msn and I get a msg in the event viewer that the error is NTDLL. DLL and talked with msn. Called MSN windows Dept. -How can I correct this situation?
Hello
Did you change your computer?
Method 1:
I suggest you perform the clean boot and check.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 2:
I also suggest you to follow the link and check.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
-
I installed adobe pagemaker 7.0 in windows 7 ultimate, but I am not able to use it, can anyone tell me about any other program that will allow me to open my page maker in windows 7
@
3 samples of files pm6 and @jay chevako warning message
On Mon, Sep 21, 2015 at 00:25, Jay Chevako [email protected]>
-
Not able to use the intelligence of the Visual studio 2010 editor runtime SDK sample code?
whenevr I start sdk sample project in visual studio, I can build, debug, run, but the problem is that VS 2010 editor showing a lot of red lines under several lines of code, with the mouse, place the cursor to show some sort of error (especially _ is not defined) Moreover, I'm not able to use VS editor intelligence function and I need to check the reference of the SDK software unaltered time .this who is the solution to this problem.
1. create the environment variable root INDESIGN_SDK_DIR with the path to the folder of your SDK
provable INDESIGN_SDK_DIR = "C:\SDK\InDesignCS6SDK".
2. in your project, add this on the project settings:
'VSProject'-> 'Properties'-> 'Properties of Configuration'-> ' directories of VC ++ "-> 'Executable directories' adds:
\Devtools\bin $(INDESIGN_SDK_DIR)
"VSProject"->"Properties"-> "Configuration Properties"-> "C++"-> "general"-> "Additional Include Directories" adds:
\Source\precomp\msvc $(INDESIGN_SDK_DIR);
\Source\public\interfaces\xmedia $(INDESIGN_SDK_DIR);
\Source\public\interfaces\preflight $(INDESIGN_SDK_DIR);
\Source\public\interfaces\ui $(INDESIGN_SDK_DIR);
\Source\public\interfaces\tables $(INDESIGN_SDK_DIR);
\Source\public\interfaces\text $(INDESIGN_SDK_DIR);
\Source\public\interfaces\graphics $(INDESIGN_SDK_DIR);
\Source\public\libs\widgetbin\includes $(INDESIGN_SDK_DIR);
\Source\public\interfaces\workgroup $(INDESIGN_SDK_DIR);
\Source\public\interfaces\interactive $(INDESIGN_SDK_DIR);
\Source\public\interfaces\interactive\ui $(INDESIGN_SDK_DIR);
\Source\public\interfaces\colormgmt $(INDESIGN_SDK_DIR);
\Source\public\interfaces\utils $(INDESIGN_SDK_DIR);
\Source\public\interfaces\incopy $(INDESIGN_SDK_DIR);
\Source\public\interfaces\layout $(INDESIGN_SDK_DIR);
\Source\public\interfaces\architecture $(INDESIGN_SDK_DIR);
\Source\public\interfaces\cjk $(INDESIGN_SDK_DIR);
\Source\precomp\common $(INDESIGN_SDK_DIR);
\Source\public\includes $(INDESIGN_SDK_DIR);
\Source\public\libs\publiclib\plugins $(INDESIGN_SDK_DIR);
\Source\public\libs\publiclib\files $(INDESIGN_SDK_DIR);
\Source\public\libs\publiclib\objectmodel $(INDESIGN_SDK_DIR);
\External\asl\boost_libraries $(INDESIGN_SDK_DIR);
\Source\sdksamples\common $(INDESIGN_SDK_DIR);
\External\afl\includes $(INDESIGN_SDK_DIR)
Adds the "VSProject"->"Properties"-> "Configuration Properties"-> "Linker"-> "general"-> "additional library directories:
\Build\win\objr $(INDESIGN_SDK_DIR);
\External\afl\libs\win\release $(INDESIGN_SDK_DIR);
\External\icu\libs\win\release $(INDESIGN_SDK_DIR)
Adds "VSProject"-> "Properties"-> "Properties of Configuration"-> "Linker"-> "Input"-> "Additional Dependencies":
PMRuntime.lib;
Public.lib;
WidgetBin.lib;
AFL.lib;
-
not able to use TKPROF, why?
I have access to the user_dump_dest directory, and I see these trace files.
But I'm not able to use TKPROF to display the trace file, why?
What can I do to make this work?
bash-3.00$ which tkprof no tkprof in /bin /usr/bin /sbin /usr/sbin /usr/ucb /usr/etc /etc /usr/local/bin bash-3.00$ tkprof bash: tkprof: command not found
TKProf is an executable in ORACLE_HOME. You must set the environment variable oracle base to run tkprof (ORACLE_SID, ORACLE_HOME, PATH etc.)
http://download.Oracle.com/docs/CD/B28359_01/server.111/b28274/SQLTrace.htm#PFGRF01010
HTH
Srini -
Not able to use 4 G network Reliance Jio on iPhone 6
This cellular network has not been certified by the carrier for LTE on iPhone. Battery life, calls, SMS, voicemail and cellular data may be affected. »
After going to setting-general-carrier-version is 24.1jio and I am using iOS 9.3.2
There is still no bar to network and I'm not able to use 4G on the iPhone 6
Apple model 1549
Please help as soon as possible
Help what? This carrier does not support LTE on the iPhone. There is nothing we can do about it. Complain to your carrier.
-
I bought an iphone 4 on ebay but it's locked, icloud so I am not able to use it, and the previous owner is available to remove the device from their account: How can I use the appliance?
You can not. Try to return the unit and get your money back. There is absolutely no way for you to unlock the device,
-
Not able to use iTunes after that put 12.3.3 updated
Not able to iTunes after put 12.3.3 updated
After installing update iTunes to 12.3.3 (after the prompt), I'm not able to use Itunes. When ever open in 10 seconds a pop-up message is displayed which says that itunes has stopped working. a problem caused the blocking of the program works correctly. Please close the program. two close options to obtain the program and the program to debug.
Please help solve this problem
Hello! Try the steps suggested here:
Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support
If you can't install or update iTunes for Windows - Apple supports
I hope this helps!
-
Satellite A100: I am not able to use the keys FN - common module error
HY,
I have a toshiba satellite A100 series and I have a problem:
I'm not able to use the fn functions (for example fn + f9 to turn off the touchpad or fn + f3 to the eve and so on...) and I got an error concerning "common module.A dialog box told me that the common module is closed...
Someone knows this problem?I'm sorry for English...
Thank you
Hello
I put t know why this error message and why the common modules stopped working, but to my knowledge, the common modules are needed to run and use the FN keys for example.
So here is my advice;
Go to Toshiba's European diver page, choose the common law modules, download, unzip, and reinstall it again!After restarting again the FN keys should work again.
Best regards and good luck
-
I was wondering why we are not able to use 5.0 GHz, does make a difference? Totally, I do not know. Maybe you guys can help me. Thank you!
(please not all values are estimated and not 100% accurate)
The only advantage on the 5 GHz will be noticed if you're less 1 mtr from the router once you pass the 1mtr threshold you will lose any advantage in speed so your phone will automatically be seleect the 2 GHz band.
5 GHz bandwidth may push your wifi connection up to 300Mbit while 2 GHz is limited to about 190Mbit
but on 802.11n distance plasys much of the speed you will actually recive therfore in the case of mobile phones there is no great advantage in the phone, a connection of 5 ghz as if you where to walk away from your router 3mtr aprox you up to 180Mbit in speed is (in my opinion) main reason why phones do not hold a connection of 5 ghz for a long time.
the 2 ghz range will be a higher speed over a longer distance (this is on 802.11n)
However if you have an 802. 11 a router then the benefits of the 5gzh is capped at 190mbit however, you can hold a stronger signal over a longer distance compared to 802.11n the problem here is that the routers are configured more to computers and personal computers portable therfore so they droped the 802. 11 a band and open until the speed 802.11n short-range can on long distance, is no great loss because your device will automatically change to load of bands on your remote (this can be demonstrated by your router at 5 GHz to lock if it supports doing so)
and you will also notice that your razr connect to band 5 GHz in the present case.
In required short is correct in the statement there is no advantage to 5 GHz running more than 2 GHz.
I hope this explains a little about your problems.
Kind regards
Kristian
-
RN204: TB 2 x 4 and 1 x 2 and 1 x 3 TB - not able to use the full capacity
OS: 6.4.1
Hello
I spent many hours up to now to gather without success. The calculator RAID netgear said 8.16 TB in X-Raid and Flex - Raid 5 with my combination of hard drives, but I'm not able to put in place. As I want to use the encryption I started with a Flex - Raid 5 with 4 hard drives, resulting in a volume< 6="" tb="" (4x="" 2="" tb="" as="" raid="" 5)="" and="" i'm="" not="" able="" to="" use="" the="" capacity="">
What is the right way to configure the system with full capacity of 8.16 TB (perhaps with several volumes)? I do not know more what to try and to reset the system and let X-Raid decide will not work because you cannot configure X-Raid with encryption.
I think that to use the entire space, we need something like:
RAID 5 on all 4 hard drives with 2 TB = 6 TB of usable capacity
RAID 5 on 3 hard disks with a capacity of 1 TB = 2 TB
RAID 1 on 2 hard drives with a capacity of 1 TB = 1 to
But HOW? Don't see no way to add a volume because all HDDs are 'blue', they do not serve at full capacity!
Here my current situation started with all the devices that have been installed since the beginning (it is not a HARD extended drive configuration).
It is excactly what I expect it works when buying the RN204. But this device is now on its way to Amazon and my new QNAP 431 + initialization of disks now!
Thanks for all your help!
-
I was running Mozilla firefox on my computer until two weeks ago. At that time, the screen went black and now I am not able to use it. When I click on the icon and open to the top it says cannot load xp.com and a flag of resolution comes up saying it can't run a resolution less than 1930 x 2300. I have no idea what this means and how I can solve this problem. I thought that maybe the application was bad, so I deleted and then added it back on and it does the same thing. I even did a restore of the system to try hard but nothing I did the work. So, how can I solve this problem. I'm not a computer genius, so he must be explained in simple easy to understand instructions.
Hello
I suggest that you view in Mozilla Firefox community because there seems to be a Firefox problem.
https://support.Mozilla.org/en-us/
Some examples of the problem:
«I can't open Firefox, it says could not load xpcom.» Who is wrong? »
https://support.Mozilla.org/en-us/questions/965228
"I get an error"Unable to load XPCOM". I know that I can reinstall Firefox, but how do I save my favorites?
https://support.Mozilla.org/en-us/questions/1029239
'Error message cannot open the XPCOM and impossible to open ALL pages '.
https://support.Mozilla.org/en-us/questions/1006494
Here is a YouTube video on fixing this error:
https://www.YouTube.com/watch?v=x_C2eaNj234
See you soon.
-
I have an old Dell computer with Windows XP Prof installed including service pack 1. All of a sudden, I'm not able to use my password to connect. I'm sure that the password is typed correctly, but it does not accept it. Now what?
original title: password problemHello
Please try some of the suggestions provided in the following article:
Maybe you are looking for
-
Portege R700 internal to screen very dark but can use the external monitor
Hi guys,. just had a question about my Toshiba Portege R700 as the screen went white and I couldn't see the screen or sometimes I could and it was very dark! However, the laptop could start up as normal and I could use it normally through an external
-
I'm having trouble with this unique analogue read. The situation is the following. I have a thread that executes a task. The task runs for continuous, but sometimes based on acquisition a push of button in the GUI I need one analog reading from a sin
-
When I try to download windows office updates and security of office windows dates I get an error code 00000646. I don't use windows desktop and I did not sign up for the windows desktop. could this way is not not the administrator of windows on my c
-
Photosmart C4280 does not print on OS 10.6.3
Hello I've had this printer (Photosmart C4280 all-in-one) for over a year now and it was working fine. However, when I went home last November, I installed my most old (Officejet G85). Then, when I came back, I tried to print a document, but it would
-
move a window or scrolling results in jerky waves and not smooth
When I move a window to the desktop or trying to scroll a page down the result is a series of waves rather than move smoothly