Not applied to all the selected images metadata changes

Similar Questions

• Desktop screen will not scroll all the selected images

  Using customization / Desktop / background, I have a directory selected with more than 30 photos in there. I select all to move every 30 minutes for my 2 monitor that I use on Windows 7.  But it is inevitable he will stick on a photo and stop every 30 minutes until what I left in a reselect all the photos of cycling. What happened since I installed Windows 7.  Ideas on that. Very annoying to say the least!

  Hello Chris,

  Thanks for the reply.

  Before starting with the next steps in troubleshooting, I would like to know if you have any third-party program/software installed on the computer desktop customization?

  As the steps to rename the TranscodedWallpaper.jpg has not helped, you can try the troubleshooting steps below and check if they help you solve the issue.

  Check the background setting in Power Options

  • Click Start, type Power Options in the Start Search box, and then click Power Options in the list.
  • In the Select a power plan window, click change plan settings next to your selected power plan.
  • Click change advanced power settings, and then expand the desktop background settings option.
  • Expand the slide show, and then make sure that the option of sector is set to available.
  • Click OK, and then close the window changes to the plan .

  Check the context parameter to delete in the accessibility settings

  • Click Start, Control Panel, accessibility, and then click accessibility.
  • Under explore all parameters, click on the make the computer easier to see.
  • Make sure that the option to remove background images not selected not.
  • Click OK twice, and then close the accessibility window.

  Let us know the results of the troubleshooting steps, so that we can help you further.

• 'Question by default comments' does not apply to all the quiz presenter 7.0.7

  I read a manual adobe note that:

  "Note: . " If you change the default label, feedback from the issue of the messages also change for questions that have already been created '

  And that's just for Presenter 7.0.

  But when I change 'Default Labels' in presenter 7.0.7, only Question button labels apply to all quizzes during the message Question not. The effect will run only the tests that I create after a change of information in "default question Feedback." Perhaps this is mistake of presenter 7.0.7?

  Please tell me if anyone has these experiences.

  It was something that happened in 7.0.0 to 7.0.2 (I think). Then the product has been updated with day/fixed to keep the feedback boxes that they were after the slide has been created. It was then that you were able to customize the rear power, and not to lose the customization during the change of the default label (or anything else in the Quiz Manager also).

  So you see only not the feedback change in 7.0.7, I think is the correct functionality.

• Download the image does not match the selected image - incorrect cataloguing.

  Hi have downloaded an image but it does not match the selected image.  He has obviously been catalogued incorrectly.

  AdobeStock_40645074

  Can you please SRS.

  

  The image image / I download who is it

  

  Thank you

  Hi Karen,.

  I have a license of the image on my end. You are right, that the preview is incorrect for the file I.

  We would get the image inspected and you will receive a credit on your account by Monday, May 16, 2016.

  Kind regards

  Gerard

• I can't import photos into lightroom free trial cc/6 2015. Lightroom can see all my pictures from my SDHC card and allows me to implement the import, and then clicking import it says that all the selected files (245) has not can be imported as they could

  I can't import photos into lightroom free trial cc/6 2015. Lightroom can see all my pictures from my SDHC card and allows me to select and configure the import, and then clicking import it says that all the selected files (245) has not can be imported because they could not be read. I use MacBook Pro 2015 OS X Yosemite 10.10.3, photos taken with Canon G1 X Mark II. Any ideas?

  This message indicates that you have not permission in writing to the destination directory.

  So:

  1. Determine the destination directory... go in the Lightroom import dialog box and note the location of this directory specified on the right side under "Destination".
  2. Go to your operating system and change the permissions on this exact directory have WRITE permission.

• How to display all the other images in the image indicator

  Hi all

  I use IMAQ for capture and record high freq and images high resolution. I have an indicator of image directly from 'Image Grab acquire'. Thus, the indicator image displays images at very high frequency too. To display frames, but not necessarily all alone (enough so that the operator can see what's happening). So, I wonder how I can view, say all the other images (for example all the odd/even number of images), or jump on two and show the third?

  Any help will be appreciated!

  Thank you!

  Wenlong

  Here are some general observations.

  • Image acquisition is "a horse of a different color" - in contrast to many other I/o devices, the memory containing the data (here called the "buffer") is handled by the driver and is not directly available for LabVIEW.
  • I'm guessing that you are using hardware OR video, because you use the IMAQ functions (I used only IMAQdx).  Is this true?  What camera do you use?
  • The (probably) "Awakenings" IMAQ extraction buffer herself to the camera (I say 'probably' because I don't know the hardware you use).  This means that While the loop containing it will work at the rate of the camera images (so you can easily calculate the frame rate, as your example code).

  This looks like a routine NI Demo, so I think that you don't have much experience with the treatment of Vision.  If you have a lot of other LabVIEW experience, you should be able to make the leap to the vision, once you have the idea of the functioning of the buffers.  Unfortunately, there isn't much in the way of tutorials and white papers on Vision than on other subjects of LabVIEW.

  Yes to your question - how to view every Nth frame.  This is the loop key (which arises directly from your code):

  

  As menioned above, this routine is 'clocked' by the function of extraction buffer.  What you do to display each image is th is to place control of the Image inside something like a Case statement that "triggers" each nth time.

  Here is a version of 'Nth' of the loop above (details omitted)-

  

  We always roll the filling of each buffer with a frame loop.  But we then use the whole function divide to select the nth image (those who have a remainder of 0 when i is divided by n-th) and of the 'image' line (it does not really an image) for 'Image' control, with the other case being "Default" (for all the other Valentine go) and nothing inside.  Thus each nth time in this loop, the output of the extraction buffer is the wire to an Image (and displayed), the other N-1 times the thread is going nowhere.

  Bob Schor

• Blue placeholder covers the selected image when in the Module development only

  Hello world!  Today, I applied the update to Lightroom CC to my creative cloud subscription.  At the opening of the CC in Lightroom, I improved catalogue existing images to the new file format.  But when in the develop Module, I am unable to view the selected image because it is covered with a blue placeholder? When in the library Module, I can see and change the image, but not when I'm in the develop Module.  Can you tell why this is please?  Thank you!

  

  Apparently disable hardware acceleration in Edit-> preferences did the trick...

• Get an AIArtHandle for all the selected items in the doc

  I'm doing what someone does in this other thread about the export in PNG.

  reference: http://forums.Adobe.com/thread/320685

  We have several layers (some off and locked).

  I would like to pass all the selected items to the Action of Image Optimization as a group rather than optimize each.  I use AIMatchingArt Suite to retrieve items selected, but it points to an array of AIArtHandles... any ideas?

  That's how I ended up doing and it works.  (In addition to the other code which has been referenced in the original post).

  I don't know if it would work better with an ArtSet, but it works.  Perhaps, if the images I'm flattening were somewhat more complicated, I would run in the duplication you mentioned.

  result = sAIActionManager-> PlayActionEvent (kAISelectAllAction, kDialogOff, NULL);

  result = sAIMatchingArt-> GetSelectedArt (store, & County);

  If {(result)

  Store = NULL;

  Count = 0;

  } else {}

  result = sAILayer-> InsertLayer (NULL, kPlaceAboveAll, & newLayer);

  If (newLayer &! result)

  {

  sAILayer-> SetLayerVisible (newLayer, true); See the layer

  sAILayer-> SetLayerIsTemplate (newLayer, false); Mark as NOT a model layer get exported

  sAILayer-> SetLayerEditable (newLayer, true);

  result = sAIArt-> NewArt (kGroupArt, kPlaceAboveAll, Nile, &group);)

  for (index = 0; (result == kNoErr) & (index< count="" );="" index++="" )="">

  Art AIArtHandle = (* store) [index];

  Copy of AIArtHandle;

  Add the art group

  result = sAIArt-> DuplicateArt (kPlaceInsideOnBottom, group, ©);)

  }

  }

  }

• How to disable all the selections at once?

  How to disable all the selections at once?

  If you are referring to the playlist, artist, album & kind selection boxes, then I don't think that there is a way to uncheck those all at once.

  If you mean the boxes in the view of songs Ctrl + click and the checkbox to check or uncheck all of the boxes. Note, however, that the use of these boxes is a bad way to manage the synchronization. Uncontrolled songs are ignored in the normal course of track in track or shuffle playback. Better to use one or more playlists to control what is synchronized and have checked most, if not all of your library. Items not controlled in my library are things like interview bonus tracks that had never what to hear accidentally, I keep in my library.

  TT2

• Button to navigate to another page does not not work properly all the time.

  Hello

  I'm just starting to explore the ADF, I use Jdeveloper 12.1.3.0.0 and integrated weblogic server that comes with the IDE.

  I just created a simple application with a welcome page called Main.jsf and then 2 task bounded, streams called SearchStudentsFlow and Studenloansflow, each workflow has a jsf page. The home page has a single button that sends me to the first task flow, SearchStudentsFlow and I can see is the page in that workflow, AwardsSearch.jsf. Also in the AwardsSearch.jsf page I have a button that takes back me to the home page.

  The first problem I have is that when I run the application starting at the home page button in the works of the great homepage the first time, the button send me to the AwardsSearch.jsf , but once I decide to go back to the homepage and then click on the button to go to the first task flow the button does nothing. This happens whenever I decide to return to the home page of any page in my project.

  Also, I copied the entire previous project into a new project and I decided to use the ADF security infrastructure in this new project to create a log in page create users and give them different roles and levels of access.

  I created some users who have access to all pages and all the streams, but when I run the application starts the login page and I login successfully and go to the home page, the button on the home page does not work.

  
  

  I don't know why the button sometimes works, but not of others and also I do not know why when I use the login page, the button doesn't work. I don't know if these 2 problems are related or not.

  
  

  This is my code in the homepage:

  <?xml version='1.0' encoding='UTF-8'?>
  <!DOCTYPE html>
  <f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
      <af:document title="Main.jsf" id="d1" binding="#{backingBeanScope.backing_Main.d1}">
          <af:form id="f1" binding="#{backingBeanScope.backing_Main.f1}">
              <af:panelGridLayout id="pgl1" binding="#{backingBeanScope.backing_Main.pgl1}">
                  <af:gridRow marginTop="5px" height="20%" id="gr1" binding="#{backingBeanScope.backing_Main.gr1}">
                      <af:gridCell marginStart="5px" width="34%" marginEnd="5px" id="gc1"
                                   binding="#{backingBeanScope.backing_Main.gc1}">
                          <af:image source="/images/NU_Logo_purple.jpg" shortDesc="Northwester University" id="i1"
                                    binding="#{backingBeanScope.backing_Main.i1}"
                                    inlineStyle="width:293px; height:197px;"/>
                      </af:gridCell>
                      <af:gridCell id="gc3" binding="#{backingBeanScope.backing_Main.gc3}" width="33%"/>
                      <af:gridCell id="gc4" binding="#{backingBeanScope.backing_Main.gc4}" width="33%"/>
                  </af:gridRow>
                  <af:gridRow id="gr3" binding="#{backingBeanScope.backing_Main.gr3}" height="10%">
                      <af:gridCell id="gc5" binding="#{backingBeanScope.backing_Main.gc5}"/>
                      <af:gridCell id="gc6" binding="#{backingBeanScope.backing_Main.gc6}">
                          <af:button text="Search Awards" id="b1" binding="#{backingBeanScope.backing_Main.b1}"
                                     action="goSearchAwards"/>
                      </af:gridCell>
                      <af:gridCell id="gc7" binding="#{backingBeanScope.backing_Main.gc7}"/>
                  </af:gridRow>
                  <af:gridRow marginTop="5px" height="70%" marginBottom="5px" id="gr2"
                              binding="#{backingBeanScope.backing_Main.gr2}">
                      <af:gridCell marginStart="5px" width="100%" marginEnd="5px" id="gc2"
                                   binding="#{backingBeanScope.backing_Main.gc2}"/>
                  </af:gridRow>
              </af:panelGridLayout>
          </af:form>
      </af:document>
      <!--oracle-jdev-comment:auto-binding-backing-bean-name:backing_Main-->
  </f:view>
  

  And this is my code in the adfc-config. XML

  <?xml version="1.0" encoding="windows-1252" ?>
  <adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
    <view id="Main">
      <page>/Main.jsf</page>
    </view>
    <task-flow-call id="SearchStudentsFlow">
      <task-flow-reference>
        <document>/WEB-INF/SearchStudentsFlow.xml</document>
        <id>SearchStudentsFlow</id>
      </task-flow-reference>
    </task-flow-call>
    <control-flow-rule id="__3">
      <from-activity-id>Main</from-activity-id>
      <control-flow-case id="__5">
        <from-outcome>goSearchAwards</from-outcome>
        <to-activity-id>SearchStudentsFlow</to-activity-id>
      </control-flow-case>
    </control-flow-rule>
    <managed-bean id="__4">
      <managed-bean-name>backing_AwardsSearch</managed-bean-name>
      <managed-bean-class>view.backing.AwardsSearch</managed-bean-class>
      <managed-bean-scope>backingBean</managed-bean-scope>
      <!--oracle-jdev-comment:managed-bean-jsp-link:1AwardsSearch.jsf-->
    </managed-bean>
    <managed-bean id="__2">
      <managed-bean-name>backing_Main</managed-bean-name>
      <managed-bean-class>view.backing.Main</managed-bean-class>
      <managed-bean-scope>backingBean</managed-bean-scope>
      <!--oracle-jdev-comment:managed-bean-jsp-link:1Main.jsf-->
    </managed-bean>
  </adfc-config>
  

  No idea why the button does not work correctly all the time?

  Thanks in advance

  Play well!

  Now, we understand the problem and can help you solve it.

  The problem is that you dropped the home page in the flow of student loan and place you thinking that you must return to the point of departure, the unlimited workflow. Actually, you don't the sheet flow loan student but simply see the homepage as part of the loan flow. The navigation rules remain those defined in the flow of student loan. Now, when you click on a button to jump to the stream of research, the target is undefined zed you simply stay on the same page, the home page.

  To make your work use case, you set a return action in the flow of student loan that return to the caller, the flow of research which, in turn, will return to his name the workflow without terminals that hold the homepage. Remove the homepage of flow of charge to students. The case of navigation allows to navigate between the button and the new return action.

  In the adf of flow research a wild-card rule that accesses the return operation sends the return flow to the home page. You must remove the sailing time pointing to research prices for the return operation because it can use the same rule of navigation of wild-card then. Then, you add a Bach student load flow navigation rule to the scholarship search page. This navigation is used for the return actionto_searchStudents.

  Timo

• Updated all the selected lines in a table.

  Hello

  Jdev Version 11.1.2.3.0

  I'm trying to update all the selected rows in a table with several choices.

          AppModuleImpl am = (AppModuleImpl)ADFUtils.getApplicationModuleForDataControl("AppModuleDataControl");
          ViewObject vo = am.findViewObject("RegistrationHistory1");
          RowKeySet selectedRegistrations = historyTable.getSelectedRowKeys();
  
  
          if (selectedRegistrations != null) {
              Iterator iter = selectedRegistrations.iterator();
                  while (iter.hasNext()) {
                      Object facesTreeRowKey = iter.next();
                      Row[] row = vo.findByKey((Key)((List)(facesTreeRowKey)).get(0), 1);
  
  
                      if (row != null && row.length == 1) {
                          Row r = row[0];
                           r.setAttribute("Attr", "1"); 
                      }
                  }
            }
  

  But after I put the attribute on the line. My iterator ignores most of the lines and they don't last updated.

  It works very well for the removal of the line well.

  Any suggestions?

  It turn out that I got a try catch and in the catch, I had a log (e.printStackTrace ()) and I do not see a single line in the diary saying ConcurrentModificationException appearing all the time.

  Looks for read-only access to an attribute or delete lines is OK to iterate over the selected lines, but it's different for the modification of an attribute.

  The code that worked:

  Links DCBindingContainer = (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();

  Entry DCIteratorBinding = bindings.findIteratorBinding ("RegistrationHistory1Iterator");

  RowSetIterator regRSiter = regIter.getRowSetIterator ();

  RowKeySet selectedRegistrations = historyTable.getSelectedRowKeys ();

  Object [] keys = selectedRegistrations.toArray ();

  for (Object key: keys) {}

  Line currentRow = regRSiter.getRow ((Key) ((List) key) .get (0));

  removeOrModify (currentRow);

  }

• Am not able to resize the fonts, images, or anything that is related to the use of numbers.  How can this be corrected?

  Am not able to resize the fonts, images, or anything that is related to the use of numbers.  How can this be corrected?

  Hello

  Is this a problem of input in any number?

  All applications (such as Notepad) do have the same problem?

  Is your Num Lock?

  Brian

• Data merge do not pick up all the fields of data

  Hello

  I had a problem, posted here: http://forums.adobe.com/thread/1217090

  Essentially, I used the "CSV2Tables" script to pre-populate arrays of simple column 2 with information from a CSV data source.

  The tables consist of a title and a block on this specific topic. Many of the blocks of information that I am importing also contain the tag (< < DataTag > >) data

  The plan is to use CSV2Tables to populate the tables, then change the data source and run an ID data merge to replace all < < flags > > normal in the tables with the information from a second source of CSV data.

  The problem is, CSV2Tables is important data and tables very well pre-load, but data tags that are found in each body text are picked up in plain text (as Peter Spier has pointed out, they are being requested by a plain text stream rather than drag since the merger Panel and direct mail) so when I try to run direct mail ID , none of the fields are in my document.

  My question is - is there a method, or a script available out there that can essentially do a find/replace in a document and replace the text that appears as the < < PlainText > > with a data that is recognized by ID, label that will allow me to run a data merge?

  Told me to check out some of the available commercial plugins out there, but registration and establishment of demo would force me to contact our it supplier for each, and it would be a comprehensive process.

  Any help is very appreciated.

  Hello

  As far as I know it actually takes a script to replace "plain text" with dataMergeTextPlaceholders.

  a small example;

  Array.prototype.find = function (string) {
      for (var s = 0; s < this.length; s++)
          if (this[s] == string) return s;
          return -1;
      }
  
  var mFile, mDoc, mFields, mFieldsNames, mStory, mPlainTxt, mNameToCompare, mField_ID;
  
  // edit this with proper .csv path
  mFile = File(Folder.myDocuments + "/" + "Merge.csv");
  mDoc = app.activeDocument;
  mDoc.dataMergeProperties.selectDataSource(mFile);
  mFields = mDoc.dataMergeProperties.dataMergeFields;
  mFieldsNames = mFields.everyItem().fieldName;
  
  // script assumes a text box with "plain texts" to replace is selected
  mStory = app.selection[0].parentStory;
  app.findGrepPreferences = null;
  app.findGrepPreferences.findWhat = "<<.+?>>";
  mPlainTxt = mStory.findGrep(true);
  for (var k = 0; k < mPlainTxt.length; k++) {
      mNameToCompare = mPlainTxt[k].contents.slice(2,-2);
      mField_ID = mFieldsNames.find(mNameToCompare);
      if (mField_ID > -1) {
            mField = mFields[mField_ID];
          mDoc.dataMergeTextPlaceholders.add (
              mStory,
              mPlainTxt[k].insertionPoints[0],
              mField
              )
      mPlainTxt[k].remove();
       }
      }
  

  At this point, you can run a "normal data merge.

  This should work for related managers (the one selected) or a table inside the selected image

  I hope it could be useful for more complex tasks

  Rgds

  Jarek

  Post edited by: Jump_Over ==> added media because if last statement

• Custom code to return all the selected items in a dynamic list

  Does anyone know of a custom code to return all the selected items in a dynamic list? Support told me that Dreamweaver does not return the last item. If anyone can give me a Tips how make this code custom or can direct me to code, I would be eternally grateful.
  
  

  Thanks to you two. I used the square brackets since they are in this season...

  No,

• I keep getting the "this connection is not approved" in all the sites when I use Firefox on windows laptop 36.0.1 8. How can I overcome this.

  I keep getting the "this connection is not approved" in all the sites when I use Firefox on windows laptop 36.0.1 8. How can I overcome this.

  Hi vijaysampath, please make sure first that the date, time, and time zone are set correctly on your system. If this does not solve the problem (or it is already set correctly), a possible solution depends on different factors:

  • What is the error code indicated under Technical Details on the error page?

  in case the error code is equal to sec_error_unknown_issuer, please try to add an exception on the bottom of the error page to verify the certificate, as shown on the attached screenshot:

  • What information about the issuer of the certificate contain?

  Please take these two pieces of information. Thank you!