Not available on internet MediaHub

Similar Questions

• When I start Firefox, no Web site opens. He says that's not available. Internet Explore works on web sites. I deleted and reloaded Mozilla and it did not help.

  It started about 2 weeks ago. The homepage is Cox and he said initially that the web site was being repaired. Now whe Mozzilla is open, a message appears that the site is uavailable. By clicking all bookmarks results in the same message. The message appears immediately after the button enter is pushed.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

• Cisco ASA5505. Not available through the firewall identity web services

  Hello, everyone!

  Then put the puzzle patterns to ensure that users are connected using AD and went to the internet.

  Given Cisco ASA 5505. On the domain controller expected agent AD (which says dc - up and customer - facing upwards), ASA quietly takes user connections.

  IP addresses on the network are distributed by DHCP, which is triggered on a domain controller.

   

   

   

  The essence of the problem is that, after the authentication of the user online falls after awhile. That is the user logged on to the computer, and then open the browser, open a few sites, then went 5-7 minutes of inactivity, and Internet is not available. Internet appears when the reconnection of the user at a certain time or the computer disable "LAN network connection" for 1 minute. You don't have to dig?

  This configuration on the SAA as follows:

  object-group user ACTIVE_ALLOW
 user-group DCU\\CASA61_Allow
 user DCU\User1
 user DCU\User2access-list inside_access_in_1 extended permit ip object-group-user ACTIVE_ALLOW
192.168.1.0 255.255.255.0 any log debuggingaaa-server ADA protocol radius
 ad-agent-mode
 interim-accounting-update
 reactivation-mode depletion deadtime 1
 merge-dacl after-avpair
aaa-server ADA (inside) host dc61-01
 key *****
 radius-common-pw *****
 no mschapv2-capable
aaa-server AD protocol ldap
 reactivation-mode depletion deadtime 1
aaa-server AD (inside) host dc61-01
 ldap-base-dn dc=DCU,dc=local
 ldap-scope subtree
 ldap-naming-attribute sAMAccountName
 ldap-login-password *****
 ldap-login-dn CN=CISCOASA61,OU=Users_MC,dc=DCU,dc=local
 server-type microsoft
user-identity domain DCU aaa-server AD
user-identity domain DC61-01 aaa-server AD
user-identity default-domain DCU
user-identity action domain-controller-down DCU disable-user-identity-rule
no user-identity action mac-address-mismatch remove-user-ip
no user-identity inactive-user-timer
user-identity logout-probe netbios local-system probe-time minutes 60 retry-interval seconds 5 retry-count 5 match-any
user-identity poll-import-user-group-timer hours 12
user-identity ad-agent active-user-database full-download
user-identity ad-agent aaa-server ADA
user-identity user-not-found enable

  At this point, while writing this message here (20 min), 1 hour from the Internet threw.

  Hello;

  Remove the NetBios sensors and see if the problem goes away.

  Mike.

• Favorites menu is not available in the combustion chamber, but it is available in internet explore. Why?

  Favorites menu is not available in the combustion chamber, but it is available in internet explore. Its very useful to save the url.

  Please provide the Favorites menu in the combustion chamber.

  Firefox uses the term bookmark instead of bookmarks/favorites.

  Firefox has also several advanced features see also

  • Create bookmarks to save your favorite Web pages
  • Use tab groups to organize a large number of tabs

  The text above in blue are clickable links, the articles themselves have also other links within them.

• delete a block - my computer won't let me use google chrome as a browser. It indicates that the internet connection is not available.

  When you use the internet, my virus detector asked if I would allow google chrome to download a newer version. I clicked on the decline, and then my internet has stopped working. I finally got back on, but now my computer won't let me use google chrome as a browser. It indicates that the internet connection is not available. I was able to use other browsers, but not Google. I tried disabling my firewall to see if it would work then, but it still doesn't work. Any suggestions? I'm afraid, that I blocked it somehow. Thank you!!

  Hello

  I suggest you post your question in the Google Chrome forums here: http://www.google.com/support/forum

  This looks like a problem with this specific program and not with Windows. I hope this helps!

• My internet connection laptop keeps dropping out. This utility solves temporarily, saying the default gateway of something is not available.

  My internet connection laptop keeps dropping out. This utility solves temporarily, saying the default gateway of something is not available. How can I permanently?

  Hello

  1. who is the operating system installed on your computer?

  2. are you using a cable or a wireless Internet connection?

  3. were there any changes or updates made on the computer?

  4. what store did you try?

  Follow the steps mentioned below and check.

  Method 1: I suggest you to return the item and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  You can try resetting WINSOCK, TCP/IP IPv4 and IPv6 TCP/IP stack.

  a. Click Start and in the search box, type cmd.

  b. right click on command prompt, select "Run as Administrator" to open a command prompt.

  c. at the command prompt, type the following commands:

  netsh winsock reset catalog, which resets the WINSOCK entries to the default installation

  netsh int ipv4 reset reset.log that resets the stack TCP/IP IPv4 default installation

  netsh int ipv6 reset reset.log resets the IPv6 TCP/IP stack by default installation

  d. restart the computer.

  Method 3:

  Reset the default router by pressing the reset for 15 seconds with power button.

  a. turn off the modem, the router and the computer.

  b. connect the modem to the WAN/Internet port on the router.

  c. connect the computer to one of the router's LAN/network ports.

  d. turn on the modem, wait for triggering connect light.

  e. turn on the router, wait two minutes.

  f. start the computer.

  g. when the computer is completely loaded, check if the problem persists.

• Cannot get on internet, ebay or by e-mail. Get a message that says - Web page not available-. How can I fix th

  Cannot get on internet, ebay or by e-mail. I get the page that says - Web page not available-. How can I fix?

  Make sure that you are connected to your WiFi network and make sure that an internet connection could be established since the modem (the area where past the line cable or phone) and the router (the box that connects to the modem via ethernet).

• My internet rpet 'unidentified network' + "the default gateway is not available"...

  My internet was working fine before, but now repeat me 'unidentified network' and I know that's not my internet because I have another laptop that uses the internet itself very well. Then when I try to solve problems, he said "the default gateway is not available"... of the suggestions?

  Hello

  ·         Did you do last changes made on your computer before the show?

  ·         Using internet connection wired or wireless?

  Method 1:

  Follow the steps in troubleshooting from the link and check if that helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Temporarily disable the firewall on your computer and check if it makes a difference.

  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note: Makes sure to turn Windows Firewall back, once you have done the troubleshooting.

  Method 3:

  Reset WINSOCK, TCP/IP IPv4 and IPv6 TCP/IP stack.
  a. Click Start and in the search box, type cmd.
  b. right click on command prompt, select "Run as Administrator" to open a command prompt.
  c. at the command prompt, type the following commands:
  netsh winsock reset catalog which resets the WINSOCK entries to the default installation.
  netsh int ipv4 reset reset.log that resets the stack TCP/IP IPv4 default installation.
  netsh int ipv6 reset reset.log resets the default install IPv6 TCP/IP stack.
  d. restart the computer.

  Also, see this KB article:

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Kind regards

• In Windows Media Center, it has an option for Internet TV. When I try to use it, it has a popup that says that this feature is not available in the Canada. I am in Pa, USA.

  Internet TV in Windows Media Center

  In Windows Media Center, it has an option for Internet TV. When I try to use it, it has a popup that says that this feature is not available in the Canada. I am in Pa, USA. I checked the language settings and location, and they are set for English and the USA. I am running Windows Vista. Any help would be greatly appreciated.

  Barb thanks for all your help. I do not have it work, but I've upgraded to windows 7 and now it works.

  ~ James

• Losing Internet connection because of the default gateway is not available.

  I keep losing internet connection and when I run the troubleshooter, it comes up saying "the default gateway is not available". I have an HP with Intel dv6985se. I was advised to do the following:
  I had the same problems of chance which I fixed it by simple disabling 'SLEEP ON DISCONNECT' SideScalng disconnect

  1 Access Device Manager (Control Panel > system and security > system > Device Manager)
  2. expand the network adapters
  3. Select the adapter that you are using (if more than 1 Repeat step 4 to 8 for each adapter)
  4. right click and select Properties
  5 click Advanced
  6. If you have installed Nvidia Ethernet configuration click the button
  7. scroll to the bottom of the list and disable the device sleep on disconnection and receive Side Scaling
  8. save the settings

  I appreciate this help info but none of this applies to my computer has. In my device under 'Network adapters' Manager, I do not have Nvidia, Asus and AMD, which is listed under my network cards is "Intel Wireless WiFi Link 4965AGN" and "Realtek RTL8101E Family PCI - E Fast Ethernet NIC (NDIS 6.20)".

  The help that I've provided says disabling "Sleep on Disconnect" and "Receive Side Scaling"... or those who are in one of my "adapter properties tab advanced options" for both my Intel and Realtek... no where does say anything about sleep on disconnect or side scaling.

  I was online with HP cat many times and Ive tried the options they have provided that is basically what I've found here but nothing has worked so far! My computer is 1 1/2 old and is preinstalled with Vista 64-bit. Recently, I have completely restored my computer with Windows 7 64 bit, and ever since then, I can't download anything or talk to HP or any kind of help because I lose the connection. Could someone please help me solve this problem... to be frank and honest he pisses me off beyond words that I never had this problem when I'm on Vista!

  I don't know what else I can provide to better help me to solve this problem, but if anyone would like more information on what programs etc, my computer has let me know and I will provide the information. Below, I'm pasting the info I received through my history of troubleshooting like a Notepad of paper Network Diagnostic and Route.Print document.

  Windows IP configuration

  Name of the host...: Helvis-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: Belkin

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. : Belkin
  ... Description: Intel (r) Wireless WiFi Link 4965AGN
  Physical address.... : 00-1F-3B-A2-B7-6B
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::58d1:7968:4f2e:e873% 12 (Preferred)
  IPv4 address: 192.168.2.3 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Wednesday, 10 March 2010 19:03:56
  End of the lease...: Sunday, April 17, 2146 01:58:36
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DHCPv6 IOOKING...: 218111803
  DHCPv6 DUID customer...: 00-01-00-01-13-1C-37-DE-00-1E-68-7F-D5-C3
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  Description...: Realtek RTL8101E Family PCI - E Fast Ethernet NIC (NDIS 6.20)
  Physical address.... : 00-1E-68-7F-D5-C3
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. Belkin:

  The connection-specific DNS suffix. : Belkin
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::5efe:192.168.2.3%14(Preferred)
  ... Default gateway. :
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: disabled

  Tunnel adapter isatap. {BC831AD2-8EB9-45C9-9FB7-D2CF0E447380}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:4137:9e76:451:18e9:3f57:fdfc (Preferred)
  Address IPv6 local link...: fe80::451:18e9:3f57:fdfc % 13 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Print route Notepad document:

  ===========================================================================
  List of the interface
  12.. 00 1f a2 b7 6B 3B... Intel (r) Wireless WiFi Link 4965AGN
  11... 1e 00 7f 68 c3 d5... RealTek RTL8101E Family PCI - E Fast Ethernet NIC (NDIS 6.20)
  1... software Loopback Interface 1
  14.. 00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter
  15 00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2
  13 00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
  ===========================================================================

  IPv4 routing table
  ===========================================================================
  Active routes:
  Network Destination gateway metric Interface subnet mask
  0.0.0.0 0.0.0.0 192.168.2.1 192.168.2.3 25
  127.0.0.0 255.0.0.0 127.0.0.1 on route 306
  127.0.0.1 255.255.255.255 127.0.0.1 on route 306
  127.255.255.255 255.255.255.255 on-link 127.0.0.1 306
  192.168.2.0 255.255.255.0 on binding 192.168.2.3 281
  192.168.2.3 255.255.255.255 on binding 192.168.2.3 281
  192.168.2.255 255.255.255.255 on binding 192.168.2.3 281
  224.0.0.0 240.0.0.0 on-link 127.0.0.1 306
  224.0.0.0 240.0.0.0 on binding 192.168.2.3 281
  255.255.255.255 255.255.255.255 on-link 127.0.0.1 306
  255.255.255.255 255.255.255.255 on binding 192.168.2.3 281
  ===========================================================================
  Persistent routes:
  None

  IPv6 routing table
  ===========================================================================
  Active routes:
  If metric network Destination Gateway
  13 58: / 0 sur-lien
  1 306: 1/128 liaison
  13 58 2001: / 32 on a link
  2001:0:4137:9e76:451:18e9:3f57:fdfc 13 306 / 128
  Over a link
  12 281 fe80: / 64 On-link
  13 306 fe80: / 64 On-link
  FE80::5EFE:192.168.2.3/128 14 281
  Over a link
  FE80::451:18e9:3f57:fdfc 13 306 / 128
  Over a link
  FE80::58d1:7968:4f2e:e873 12 281 / 128
  Over a link
  1 306 ff00: / 8 On-link
  13 306 ff00: / 8 On-link
  12 281 ff00: / 8 On-link
  ===========================================================================
  Persistent routes:
  None

  Helvis,

  If the error does not recur in safe mode then there is probably a startup item or service causes the error. Follow the steps on the following link to locate the item or service responsible for the error:

  http://support.Microsoft.com/kb/929135

  Hope that helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hi, I'm connected to the internet, but the pages I open usually are not available.

  I can only access my email account and hot mail, gmail, but when I try to open a new page that they are not available. Is this a problem with my computer or the internet?

  Hello

  1. what browser do you use to visit Web sites?

  2. What is the exact error message you get when you go to the site?

  Perform the steps from the link mentioned below if you have Internet Explorer as your browser.

  "Internet Explorer cannot display the webpage" error in Internet Explorer

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope this information helps.

  Please let us know if you have any questions.

• Internet TV is not available in Windows Media Center

  I upgraded four machines to Windows 7. Two of them were clean installs and Netflix and Internet TV options are available. However, two of the machines made an upgrade on the spot and Netflix and Internet TV options are not available. Is there an update available so that I can update Windows Media Center on these machines? If this is not the case, how can I get that option?

  Thank you
  Bill

  The following has worked for me in the Canada:

  Open Control Panel, select clock, language and region

  Select the location to change and change in the United States

  Select the administration tab and change settings English (United States) system locale and save changes

  then delete the contents of the c:\programdata\ehome folder (I moved content in a folder temporary everything first just in case...)

  Launch Media Center, download updates, shut it down after receiving notification of download completed (if your not sure its finished, you can check the Media Center icon in the notification bar, if it has an arrow toward the low point over-buried on it, its download yet)

  restart the Media Center and select TV and Internet TV so the Guide should be there.

  Note some of the programming of a regional protection based on the ip address, so some channels will be always blocked

  I've read other messages indicating Internet TV once was performed for the first time, you can change the settings of the control panel you actual location, but I did not and does not check what I prefer to let my settings as USA because I think faster using the SAE measures instead of the metric.

• Unable to connect to the Internet using Auntie Photon, it shows the device has been disconnected or is not available when clicking on the button connect

  Original title: Auntie Photon

  Hi all

  I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.

  Help, please.

  Hi Varun,

  Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.

  Please help me with the following information related to this issue:

  1. You have installed the required software on your computer which came with Auntie Photon?
  2. Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
  • Press Windows Key + X.
  • Select Device Manager.
  • Check if there is no error or exclamation point under Auntie Photon.

  This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.

  Please follow the steps mentioned below:

  Method 1: Run the hardware troubleshooter

  The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.

  1. Press Windows key + W on the keyboard.
  2. Type the Troubleshooting in the search bar and press Enter.
  3. In the Troubleshooting window, click show all in the left pane.
  4. Click hardware and devices.
  5. Click right on material and devices and and select run as administrator.
  6. Click Next and follow the on-screen instructions to complete the process troubleshooting.

  If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.

  Method 2:

  Note: Make sure that the Auntie Photon dongle is plugged.

  Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:

  1. Press Windows key + X on the screen.
  2. Select Device Manager.
  3. Expand the network adapter and right click on driver and select Uninstall.
  4. Restart the computer.
  5. Windows will automatically load the drivers.

  Step 2:

  You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.

  Windows Update: frequently asked Questions

  You can also get in touch with Auntie Support and check the updates to driver for Windows 8.

  Please answer us on the State of the question to help you further.

• Cannot access Windows Store. Error: App not available, either you have been disconnected from the Internet Server or access problem

  I recently bought a new vaio with touchscreen and win 8. the ' store became available? I clicked on the app and get this message: App not available, either you have been disconnected from the server or access to Internet number... something... not that is the case... .laptop is old 2 days... and I tried to put it in place... it's very frustrating... and I am hating victory 8 technology now...

  Original title: not like winning 8 all the

  Hi GESH78,

  -You are able to access the Internet outside of Windows Store?

  This issue may be caused if you are using the proxy settings, incorrect settings or store waiting for update needs to be installed on your computer. I would suggest trying the following steps and check if it helps.

  Step 1:

  Install all pending Windows updates and check if it makes a difference.

  To check updates

  one) open Windows Update in Control Panel by dragging it from the right edge of the screen, type Search (or, if you are using a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking Search), get into Windows Update in the search box, by typing or clicking on settings and then type or by clicking install optional updates.

  (b) in the left pane, press or click find updates, and then wait while Windows searches the latest updates for your PC.

  (c) if updates are found, tap or click install updates.

  Read and accept the terms of the license and then press or click Finish if the update requires it. You may be prompted for an administrator password or to confirm your choice.

  Step 2:

  I suggest you delete the Windows Store cache and check how it works.

  (a) press Windows + R logo

  (b) type wsreset.exe in the run window, and then press ENTER.

  Step 3:

  Disable the proxy connection

  If you use a Proxy connection, then try to disable the proxy connection and check.

  Follow the steps to turn off the proxy connection.

  (a) click on the gear box in the upper right corner in internet explore.

  (b) click on the Tools button and then click on Internet Options.

  (c) click on the Connections tab, then click LAN settings.

  (d) uncheck the use a proxy server for your LAN check box.

  (e) click ok.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• I don't have internet connection, so can I use offline adobe indesign, photoshop? and what is the product adobe cos cs6 is not available more...

  I don't have internet connection, so can I use offline adobe indesign, photoshop? and what is the product adobe cos cs6 is not available more...

  CS6 products are always available through Adobe:

  Buy CS6:
  ----------------------

  http://www.Adobe.com/products/catalog/CS6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html