Photosmart wireless b109n: windows 10

Similar Questions

• Photosmart Wireless B109n-z: Impossible to connect the printer wireless to the new router

  I just changed my wireless router and can not get my printer to recognize the new router.

  When you try to reinstall with the disc that came with the printer it keeps "quit unexpectedly" at the end of the installation, but before I get to connect to the printer.

  The drive indicates that it is for use with Mac OS X v10.4; 10.5, but I can't find an option to update the web site HP despite it stating that my printer is still supported.

  I can still use the printer with a USB cable connected directly to my table, but this is no help for the other devices I have.

  Hi @Paulwrow,

  Welcome to the Forums of HP Support!
   
  I understand that you are unable to connect your HP Photosmart Wireless B109n-z to your new router wirelessly. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
   
  The CD/DVD software will not work with newer versions of Mac OS X. HP doesn't have the drivers for this printer in Mac OS X 10.11 El Capitan. The last driver out of this printer is for Mac OS X 10.6. The only driver available that uses the driver update from Apple. This causes a problem when reconfigure the wireless, as this is the software for help. It would be easier if you have another computer running an operating system that is supported so that you can install the full feature software to configure the wireless.

  As an alternative method, you can try doing as a guideline to connect the wireless printer. We will use the ad-hoc connection. With the ad-hoc connection, you can launch the built-in web server (EWS) to access the wireless configuration wizard.
   
  Use the following steps as a guide:
  Restore the default settings of the network:

  1. Press the button next to the wireless Menu.
  2. Press the button next to wireless settings.
  3. Press the button next to network by default.

  Once the network is reset, the printer should disseminate the ad hoc connection. It should look like "hpsetup" or "HP Setup (and part of the printer name or MAC address). With an IP address like 169.82.12.44.
   
  Then, connect to the network printer, that is broadcasting.

  1. On the Mac in the upper right corner, click on the wireless icon and connect to the network "HP Setup" or "hpsetup".

  Print the wireless test report:

  1. Press the button next to Scan.
  2. Press the button next to the wireless Menu.
  3. Press the button next to wireless settings.
  4. Press the button next to run the wireless network Test.

  Browse the test report wireless IPV4 of the printer (IP address) 169.82.12.44.

  1. Launch your internet browser and enter the IP as shown. This should load the printer EWS.
  2. Click on the tab network across the top.
  3. On the left side, click on wireless or network.
  4. Run the Wireless Setup Wizard.

  This is the only way to reconfigure the wireless, unless you have another computer that has supported the software.

  For more information on the ad-hoc connection, see the User Guide.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• fake disconnected ' HP Photosmart Wireless B109n-z. ' message

  Hi all

  Using the center of HP sollution, I see the message offline wireless HP Photosmart B109n-z.

  However, I can print, I can see the cardriges levels filling and I have no problem to reach the printer via IP address.

  However, this issue would prevent me from scanning documents.

  I already reinstalled the app once, but it was a disaster even more great, even scubber not having to uninstall the HP printer software.

  Any ideas?

  GRZ

  Hi there @robhoe

  Welcome to the community

  It sounds to me like driver installation has not filled completely and correctly on your system Windows 8.1, which could be the reason why you do not have the scanning features in the software.

  Please make sure you that the printer will make copies before make you any software troubleshooting, as if there is a problem copying (printer hardware problem), the installation will most likely never complete successfully.

  I know you tried a scrubber, and that's what I would try again to remove completely all the components of your PC printers and then reinstall them later. If you want to give a shot of this, I'll post all the steps below for you to try!

  1 run this cleaner tool to remove the printer files. Use only an uninstall of level 3.

  HP Officejet software and driver removal utility

  2. restart the computer entirely to complete uninstallation.

  3. download and run the installation of your PS B109: HP Photosmart Wireless all-in-One Printer series - B109 Full Feature Software and Driver

  I hope this works, good luck!

• Photosmart b109n-z: Photosmart wireless b109n-z pilots

  I am trying to download the driver for my printer Photosmart wireless b109-n-z. The wizard detects the printer, but then crashes with the message "HP is compile your results." It could take up to 3 minutes, depending on the speed of your computer and connection. Thank you for your patience. "and not going anywhere.

  I saw a recent request for the driver to a different printer for someone who was having the same problem as me with the HP Web site.  The problem was solved by a direct link to the download.

  Confidence that you can do the same for me.

  Thank you in advance.

  The HP website for driver downloads is back and runing properly, you can download the latest drivers for your Photosmart b109n-z from HP here.

• HP Photosmart Wireless B109n-z: my scanner has stopped working

  My printer and copier work ok but the scanner has stopped working and gives me an error message-

  "The analysis cannot because another program or computer using the HP netwoked imaging device. Try again later.

  The device is not on a network, and there is no other users outside of myself using my laptop.

  Hello

  You can try this link?

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-wireless-all-in-one-printer-series-B109/3794623/model/3794624#Z7_3054ICK0K8UDA0AQC11TA930C7

  Thank you.

• Desktop computer connected via a cable to a wireless router - can't print on Photosmart Wireless B109n-z

  Hello

  I have my desktop (Windows XP) connected via a cable to a LinkSys WRT54GC wireless router and wireless HP Photosmart B109n-z connected wireless. I can 'see' desktop printer if I write the IP address of the printer in the browser, but printing does not work.

  I don't know how to set up the printer to print from this desktop computer. What I choose when installing printer drivers (printing via USB or wireless?). I tried manually installing printer but without success. Do I have to set up specific ports?

  Printing from laptop (connected wireless to the router) works perfectly.

  Thank you in advance for your answer, I'm really lost on this one.

  Choose print wireless while installing the software.  Because the printer is connected to your router, you don't need to go through «setup USB wireless»

  I'll try to manually add again in this way:

  Verify that you can access the web page internal to the printer by its IP address.

  1. click on the 'Start' button--> printers and fax machines.
  2. under print jobs, click on "add a printer".
  3. click on 'Next' on the Add Printer Wizard window.
  4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5 under, select a Printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. in the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. under "Add Standard TCP/IP Printer Port" enter the IP address of the printer. Click 'Next' and then click 'Finish '.
  8. now select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler, and then click "next".
  11. click on "next".
  12. click on "Next" and "Finish."

• Photosmart wireless B109n-z showing "ink cartridges above appear to be missing or damaged.

  Hello, I have a problem with my photosmart printer (wirelless B109n-z) now (on Windows 7) and I could do with some advice. He started by printing not really properly-there were only a few extremely weak lines, so I opened the lid and makes sure that the ink cartridges were properly-they came out and put in the new - but then the error message came that the cyan ink cartridge is missing or damaged. As it was low on ink anyway I replaced it with a new one but the message was still there. I went through all the steps on the site of HP to address the problem, but it is always the same and have never used a not genuine HP ink cartridge. Any help is greatly appreciated.

  Jen

  If you did not start the steps in this document it.   In step four parts 11 and 12, there are four fingers touch by cartridge.  Make sure that none of these electrical contacts are misaligned, if we're folded its place gently back in its place.  (Compare contacts faulty cyan with those on the cartridges adjacent as described in this post.)

• Cannot print from MAC on Photosmart Wireless B109n

  Hello

  I'm struglling with my new B109n-f printer to print wireless configuration.

  I have it set and the wireless network test report give it one of good health (pass on all points).  In addition, I am able to print wireless from my windows XP PC laptop.

  I am struggling with the installation on my OS Leopard 10.5.8, Macbook Pro.  I followed all the steps and when I come to add the printer in the press, and fax settings I see his IP address field and select it.

  He responds by saying: it is a valid address and complete.

  There is a field for the "tail" but it's empty, and he says: 'leave blank for default queue. "

  No drop-down options menu will appear.

  When I close these preferences and return to the Setup dialog and click on continue he informs me that I did not create a print queue.  He advises me to come back and repeat the steps (that is to say delete the printer and add it back in print and fax the same settings if there is no additional box for the print queue.

  I tried to add the printer LPD and IPP (the instructions don't say which is correct but niehter seems to work).

  If I complete the installation by ignoring the message from the queue to print the printer appears in the list of printers (such as its IP address).  If I select this printer and try them and print them, I get the printer HP dialog box that bounces on my toolbar with an alert.

  When you click on it tells me that host 192.168.0.105 network is busy and retries it in XX seconds.

  Can you help me?

  Thank you very much

  Rob (London)

  Found the problem.  It should be set to the option of HP Jetdirect and LPD not or IPP printing.

  It would be useful if it was in the manual.

  Hope this is useful to someone else who has a similar problem.

  Rob

• Photosmart Wireless B109n: Connection printer new source of wireless B109n

  I recently changed provider router and wifi, but it is impossible to get my printer connect the new wi - fi router and allow wireless printing.  So far I have tried the following:

  -All off switching several times and they are restarted in the sequence specified by HP (router, printer, computer)

  -uninstalled and reinstalled the correct HP software via download on the HP site

  -a spent more than an hour with a guy from support from Apple, but we couldn't do the recosnise of the computer the printer

  -went bought a CD player, home, uninstalled the HP software and reinstalled from the disk provided with the printer

  -assemble the complete set

  -been able to print using a cable

  However, I am still unable to connect to the printer and print using wifi.  When I run the wireless network test he told me that the name of the network went from the old router to "hpsetup".

  I can't work out where to enter new information - network name, password etc. - in the installation program or on the printer.  I tried several times to enable the router to allow a device to join the network while pressing the push button on the WEP option.  When I try to use the option to PIN the printer immediately show the pin code of the old wifi network and is still unable to join the new network.

  HP - I started this at 09:00 and it is now 17:00 - things should never be this hard...

  Hello

  Generally no full software functionality is available for your printer for later versions of OS, which means no solution to connect the pritner is offered.

  You can use another computer for example, Windows PC or n older version of OS X to connect to the printer.

  If your router supports WPS method, connect the printer using WPS listed on page 5 of the manual below:
  http://h10032.www1.HP.com/CTG/manual/c01894737

  OtherwiseI can offer the following workaround solution to overcome such a manually:

  1. Make sure that the printer's wireless radio is turned on.
  2. Click the WiFi on your Mac and join the HPSETUP network.
  3. If such a not listed, click on join another network, and then click networks sow and connect to HPSetup.
  4. Open Safari.
  5. Click Safari > Preferences and open the Advanced tab, check both the Hello checkbox on this screen, and then click OK.
  6. In the bookmarks menu, select Hello > printers and click the name of your printer.
  7. Open the network tab or wireless in the wireless Section looking for wireless or Wireless Assistant and follow this screen to connect the printer to your router.
  8. Once done, plug the Mac to your home network and add the printer as in Printers & Scanners.

  Hope that helps,

  Shlomi

• Photosmart Wireless B109n-z detects not router

  I've recently updated my OS to windows 7 on my laptop. I reinstalled the sfotware in the printer from the CD and run the wizard to set up as a wireless printer. It connects very well with a USB connection, but it errors when it tries to connect by using the wireless network. It is said that it can not detect my router, check my SSID is correct, etc. That all looks fine.

  My router is a Linksys Wireless - N ADSL2 + Gateway. My laptop is connected to this wireless OK.

  What I tried:

  Reinstall the printer s/w on the CD, same error.

  Change my Norton Firewall settings on all HP programs run automatically.

  If there is anything else that I could try, I would be grateful. The printer is brand new. I think that it is as a result of the upgrade to Windows 7 because I'm sure it worked wireless before that.

  Many thanks in advance,

  P

  Have you tried this patch?

• Photosmart B109n-z printer: printer HP Photosmart Wireless B109n-z-horizontal gray stripes on a black background

  My printer has started to produce printing black ink poor quality despite the change of cartridges and all other things related quality control. Black text is periodic display faded horizontal lines with sharp text blurry. All switches quality of ink have been increased to the highest quality without result.

  The Test page shows no problem with black type face being perfectly crisp and clear and colours print normally.

  The diagnostic test page horizontal gray bands shows in the black print ONLY. See below. Is it a matter of change, printing headed into black ink?

  Thank you

  

  Hi Chatsworth52,

  Sorry to hear that none of the steps has helped solve this problem.

  Most likely the print head needs to be replaced, but no guarantee that will fix this problem either.

  Thank you.

• I can't find the code to the printer for my Photosmart Wireless B109n-z

  Just bought an all-in-one PC and could not use my original CD for the printer to install the printing functionality.  I found my way to the Web site of the ePrint Centre and attempted to add my printer but can't find anything in the different tests to print to my printer which refers to a "printer Code".

  EPrint does not support the printer you listed.  It is possible to print to your printer using Hp ePrint mobile app.

  HP ePrint app

  Let me know how it goes.

• HP photosmart wireless B109n-z

  Squeeze taal van mijn printer niet fusion overeenstemt dat ik met Taal van het programma, hoe stel ik dat bij?

  Hi Margie,

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

• Reinstall driver Wireless B109n - hooked on "control systems".

  I had a problem with my previously installed Photosmart Wireless B109n (I think there's probably an update today).

  I received a message saying that the driver has not been installed.

  I uninstalled the driver using HP uninstaller and downloaded the driver B109n-z - but the installation seems to be stuck on step 'check' system (first stage) = it has been like this for 40 minutes now.

  Any ideas?

  Hello
  If the same persists, follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• Photosmart all-in-one wireless B109n - problem with detection of the cartridges

  I just bought a Photosmart all-in-one wireless B109n. implementation proceeded without problems (including printing test photo).

  When I tried to use it later, he said that the cartridges were not detected.
  Strange thing is that when I take one of 4 cartridges, it says that one is missing. After you have added the last of them, he says that none of them are detected.

  Also, I need to re - enter the language and area whenever I turn it on. As if it's reset instead of make a cut...

  How this can be solved?

  Back to the store where I got it.

  They saw the same thing I had met and gave me a new without much fuzz

  The new works very well