Not displaying do not feature of TimeSelector

Similar Questions

• Re: Satellite L10 - 193 - Win XP WLan driver does not feature

  Driver downloaded from the product page does not feature.

  Device Manager: network controller (yellow)
  PCI\VEN_8086 & DEV_4220 & SUBSYS_27418086 & REV_05\4 & 93A 72 167 & 0 & 20F0

  System: XP Home, just installed

  All other drivers from the Web from Toshiba site for this model are OK.

  How to solve this problem?

  Have you tried to install THIS driver?

• MAX does not display the option "features an Interfaces"-not able to configure any device

  Hi all

  I am facing a weird problem. I have LV2009 SP1, MAX 4.6 and DAQ 8.9.5 installed in my PC. Note here that LV2009 SP1 is accompanied by DAQ 4.6.2 9.0 & MAX. But for a project to support that I installed DAQ 8.9.5 & 4.6.0.Now MAX MAX displays only the 'Software' and the 'IVI Drivers"under my system and also lists the"Remote System". But there is no list of the devices and Interfaces. What could be the problem? When I upgraded to the DAQ 9.0, MAX was perfect. But I can't use it for my project because the DAQ 9.0 architecture is very different from older versions (one is that it requires a manual uninstall of the old versions of data acquisition before installing important DAQ 9.0). That being said it's that DAQ 8.9.5 cannot be used with LV2009 SP1? Should I install a patch for it? Any help would be greatly appreciated.

  Thank you

  Luxama

  Sounds like a bad install DAQmx - try repair the installation

• Windows media player does not open the wmv files and when I go to turn on or off windows feartues windows media player is not displayed in multimedia features

  Windows Media Player is not in the multimedia functions to scroll to the bottom of the pop-up window

  Hi WilliamHendry,

  1. did you of recent changes on the computer?

  2. you receive an error message during playback of WMV files?

  3. are you able to play other file format music files using Windows media player?

  In Windows vista, you will not find Windows media player available in the list of Windows features.

  Check and make sure that your computer has all the necessary codecs installed.

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  Play an audio or video file: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-an-audio-or-video-file-frequently-asked-questions

• Why not feature A Variable equal, B

  Hi all

  I have a page in my Flash file where a user can select one of the three values, and it will add or subtract the variable I on frame 1.

  So on Frame 1 I said:

  var f2f:Number = 5;
  var coach: Number = 5;
  var mentor: Number = 5;

  And the frame 13, I said:

  btnP13toP14.addEventListener (MouseEvent.CLICK, NavPage14);
  
  btnContentSmall.addEventListener (MouseEvent.CLICK, contentSmall);
  btnContentLarge.addEventListener (MouseEvent.CLICK, contentLarge);
  
  function contentSmall(event:MouseEvent):void
  {
  F2F = - 10
  coach = - 10
  Mentor = - 10
  }
  
  

  function contentLarge(event:MouseEvent):void

  {

  F2F = + 10

  coach = + 10

  Mentor = + 10

  }

  But it occurred to me that, if the user clicks on btnContentSmall, then btnContentLarge, the values would become 5, instead of 10.

  So now what I'm trying to do, is add temporary variables to Frame 13 that store the correct value and then update the original values when I go to the next section (which will have a similar process).

  Here's what I now frame 13:

  btnP13toP14.addEventListener (MouseEvent.CLICK, NavPage14);

  btnP13toP14.addEventListener (MouseEvent.CLICK, copyBack);

  
  btnContentSmall.addEventListener (MouseEvent.CLICK, contentSmall);
  btnContentLarge.addEventListener (MouseEvent.CLICK, contentLarge);
  
  var f2fTemp:Number = f2f;
  var coachTemp:Number = coach;
  var mentorTemp:Number = mentor;
  
  function contentSmall(event:MouseEvent):void
  {
  f2fTemp = f2f-10
  coachTemp = coach-10
  mentorTemp = mentor-10
  }

  function contentLarge(event:MouseEvent):void

  {

  f2fTemp = f2f + 10

  coachTemp = + 10 trainer

  mentorTemp = mentor + 10

  }

  
  function copyBack(event:MouseEvent):void
  {
  F2F = f2fTemp;
  coach = coachTemp;
  Mentor = mentorTemp;
  trace ("I ran the CopyBack script');
  }

  The Trace statement on the latter function is displayed, but when I trace variables on slide 14, the f2f, coach and mentor variables were not updated: they're still all 5.

  Someone has an idea what I am doing wrong?  I found a site that said I might need to use a class; but I really did not understand how to translate this information into a solution.

  Thank you

  M Hetherington

  For the scenario you expose to the end, if you want the value to be 15, you must assign it a value of 15.

  In your first assignment, in the first part, you were more like what you say you want to do...

  F2F = + 10

  coach = + 10

  Mentor = + 10

  Those are not add 10 to the current value of these variables, they assign fixed values... + 10 = 10, 10 = - 10, etc.

  What you have explained earlier sounds like you wanted to try to have...

  F2F += 10

  coach + = 10

  Mentor += 10

  would be those who would add 10 to the current value, so -5 + 5 and 5 would become 15

  But what you said is that if you click on the btnContentLarge button you are looking for the value to 15 regardless of what the current value is... so that means that you must assign it a value of 15

• Message box appears not - feature does not!

  Hello

  Newbie here so be gentle please!

  I have a table in my form with a Remove button to each row of the table - it works fine, but it occurred to me that it would be more appropriate to bring up a message box alerting the user that they are about to delete a table row. I tried and tried, but whenever I have test or save the file now, nothing happens when I click on the remove button - no warning window appears and the delete button does not delete the line.

  Here is my code:

  Form1.plan.plansub.plantable.planrow.Remove::click - (JavaScript, both)

  var CSMG = ' Warning: clicking YES with to remove the current entry from your diet "; "

  CMSG & = ' \n\nDo you want to continue?

  nRtn var = app.alert({)

  ({GMMC 2,,2,,'Attention'});

  if ( == nRtn 4)

  {

  This.parent.parent._planrow.removeInstance (this.parent.index);

  }

  XFA. Form.Recalculate (1);

  So, I'm probably doing something really obvious - please help!

  Sunil

  Hello

  The messageBox method returns a 4 If you click on the Yes button, Yes

  var button = xfa.host.messageBox ("you are about to delete an entry in the plan. Do you want to continue? «, ' remove the entry! ", 2, 2);»

  If (button is 4)

  {

  this.resolveNode('plantable._planrow').removeInstance (this.parent.index);

  If (xfa.host.version< 8)="">

  XFA. Form.Recalculate (1);

  }

  }

• Why Photoshop Creative cloud does not feature "color variation"? How to do it?

  I downloaded a free trial version of Photoshop Creative Cloud. It doesn't have the "change color" option in this photoshop CC. I don't think that it has nothing to do with the fact that it is a free trial version. But, how could I get the functionality? Thank you.

  Hello

  What operating system do you use?

  On the version of windows, it should be Image > adjustments > Variations

  The mac version is not the plugin of variations.

  

• Cannot display "add text" feature with fill/sign

  Was in the middle of filling of a document in Adobe Reader Ms. I added a digital signature on a single page, and then going on to the other to finish filling in part but could not do.  Kept getting a 'ping' whenever I tried.  Follow the instructions to select fill/sign, but there is no window to "add text" as shown in the tutorials.  Any help would be appreciated.

  Thank you.

  Hey paulab43625426,

  Once you have added digital signatures in the PDF document, you can not add text, edit the file, etc. Since the file is now protected.

  Kind regards

  Ana Maria

• A5000 contact is not displayed, the number

  After the update to A5000_S124_15118_8G_ROW contact names are not displayed during the call or calls and SMS messages in the journal. It's very annoying. After all, it is a PHONE and I got display calling name 'feature' since the late 90's, long before smart phones...
  Y at - it a fix for this, or maybe someone can tell me how to go back to the previous version that worked?

  Thank you

  There is an additional method to solve your problem! And you don't need to 'Factory reset '!

  All you need is just to save your contacts to SD card, then delete all the contacts and restore it from a backup again...

• Windows 7; Windows Media, shown in the programs, but not in Add/Remove programs?

  Windows 7, Windows Media seems to be in my computer; Location: programs.  However, it is not in Add/Remove (programs and features).

  I think I can use the program.  However, I seem to have a problem of display of the things with the media.   What's wrong?

  Help...

  Zara3511

  Hello

  What exactly is the problem you are experiencing in the computer?

  Are you referring to Windows media player?

  What are the formats of the files you are trying to play by using the WMP?

  As WMP is integrated in Windows 7, it will be displayed in the features of Windows instead of the list of programs.

  If you are having problems with Windows media player, please follow the suggestions below:

  Method 1: Try to use the Troubleshoot utility to see if that solves the problem.

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: Uninstall and reinstall Windows Media Player:

  Step 1. Uninstalling Windows Media Player:

  1. go to start and in the search type "Turn Windows willing or not.

  2. click on "Turn Windows features on or off".

  3. search for multimedia and uncheck the brand in the face of Windows Media Player.

  4 restart the computer

  Step 2. Reinstall Windows Media Player:

  1. go to start and in the search type "Turn Windows willing or not.

  2. click on "Turn Windows features on or off".

  3. find the multimedia functions and place a check mark in front of the Windows Media Player.

  4 restart the computer.

  Turn on or off Windows features

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  It will be useful.

• Manual duplex, duplex printing does not work on my HP Officejet g85 all-in - One Printer running Windows 7

  I have a new 64 bit Windows 7 Home Premium PC which I plugged my HP Officejet G85 printer via a USB cable.

  Tell the truth, the 'instructions' click on the 'FEATURES' tab on the active manual duplex duplexing aka.  My driver does not work

  have a "FEATURES" tab - so I can't print double-sided.  CAN YOU HELP ME?  It is not for lack of printing, since everything still works perfectly on my old XP computer.

  THE COMMANDS THAT I USE ARE:
  "FILE, PRINT, HP G85, preferences and get 'LAYOUT' & PAPER/QUALITY" tabs (but not "FEATURES" tab).

  Tab AVAILABLE the has a "print on both sides:" box of choice: a) return on long edges or Rtrn b)

  BUT EITHER IT HAPPENS ELSEWHERE NOTHING EXCEPT THE OUTPUT PRINTER ON ONE SIDE!  Help!

  XP drivers will not install in Windows 7 and XP mode, to higher than the Premium family edition.

  As far as I KNOW, even if you install the printer in XP mode, I don't think you can access the printer from Windows 7.

  The solutions are to use free Office or Open Office in XP mode, collect the files to print and then print out them which can result in the document formatting issues.

  HP is trying to tell you that you need to buy something for their current range.

• Notes of blackBerry Q10 in don't forget

  Just upgraded to Bold 9900 to Q10. Like her. Outlook more perfectly synchronized with the exception of the Notes which I expected to see in the new app store, as well as the tasks that have migrated there very well. No sign of her & technicians at Vodafone me say that's not featured or work on Q10, but saw in the Q10 (page 83) detailed online manual. Can someone advise?

  Notes will be synchronized on the new exchange servers, it won't work on Exchange 2003 or 2007

• TouchSmart HP ENVY 15t with chipset Intel Centrino Wireless N 2230 not picking up the Wireless N

  I just picked up a Touchsmart from HP ENVY 15t and want to connect to wirelessn but he does not see my router n wireless band. I do not however see the Group g. I fiddled with some of the configuration of the pilot, but he has not made a difference. I have a HP Ultrabook job and never had a problem so I know that the router is not serious. BTW, it's a Belkin AC1200 router. I saw drivers updated on the HP website but got some updated of Intels Web site. I can't believe it's a problem. I use to work on network cards, back in the day and it is hard to believe that it would not feature standard/tested. Any thoughts would be GREATLY appreciated!

  Wow this is interesting that Intel comes out there are issues but I applaud on that! I have replace the card and it went well. Hard to get off this part of the front back. Also a few small screws and two tiny wires that must be back in place to the new card. (God miss me the fat old branch PCI cards.)  :-)) So care must be taken with it but other than that worked great.

  I originally had all sorts of problems and I think that it is because in my effort to fix the 2230, I downloaded this bad set of drivers which speak of the previous answer. So I uninstalled the wireless pro software, and then he had automatically detect drivers and he chose an earlier version and then everything worked. I guess that the default windows driver will work, but I think that because I had previously installed, it will not work. If I had to do it over I would have uninstalled the first 2230 (otherwise your new wireless network will be called wi - fi 2) and also the proset wireless software.

  If you uninstall not the 2230 first before Exchange you the card then go to Device Manager and select hidden devices to get rid of him. For reason of removing sound (I think also helped) along with (as I mentioned) the auto detected Intel java plugin detects the old version of the drivers seem to be the thing that finally did it for me. I got around the full bars and the signal strength is phenomenal for 2.4 and 5 ghz bands.

  I've also used these recommended Intel for the card and the router settings

  http://www.Intel.com/support/wireless/sb/CS-030709.htm

  For some reason, my router Belkin necessary WMM enabled for devices to work with these settings. Hope this helps someone...

• Windows 8 will not activate after 1 year of service

  Purchased a HP Desktop for over a year and it came with Windows 8 (not happy) and it worked fine until a week ago.  All of a sudden when I turn on PC, I get a window that makes me go to the PC game up and says Windows will not turn on, please try again later or contact MS help.  At the same time all products Office has stopped working and I cannot print pdf files either.  Recent activity that can be connected; Norton came on PC but I never signed, I signed up 2 weeks ago. Norton does not feature anti-adware so I also loaded System Mechanic.  I had to because my machine had become infected with adware which was causing slowdowns and annoying pop ups.  How to solve this problem so that Windows is reactive?

  A few other items of interest:

  I always had problems with the download of updates to TurboTax for Windows updates, sometimes work, most of the time not.  Usually, it will look like this works, but progress will be zero for hours if let you it go.

  Thank you for your help.

  First of all:

  Try to do a system restore before you start who encounter this problem to see if it corrects the problem:

  System Restoration - how do in Windows 8 - eight Forums

  If the problem persists, try the phone activation:

  Help with the activation process, contact technical support.

• Styles of different notes in a single document - another approach

  Hello

  I'm working on a book that contains two types of notes:

  • original notes of the author of a book - up to three on a spread, numbering restarts at each broadcast
  • notes from the editor of the current edition - compatible numbering throughout history

  I've prepared two different paragraph styles for them. The two types of notes may appear on a single page (some of them are even nested - comments from the editor of notes of the author, but we'll leave it for now).

  I am aware that InDesign supports not multiple reference styles. I searched for the possible workaround on this forum and on the web, but could ' t find a satisfactory solution. Then I tryied on my own - my attempts are described below. It would be great if someone could suggest a better solution or fix my approach:

  A. use standard notes feature for first style and anchored objects for the second:

  1. Create anchored some notes text blocks
  2. Apply an object style that moves to the bottom of the main text block
  3. Apply the paragraph with numbering style
  4. Creating a cross-reference (working as a reference number in the text) pointing to the paragraph number

  That works very well with one exception - if there is more than one false note on a page (and oh yes, there are), they simply overlap rather than be stacked at the bottom of the main text block. I was hoping to solve that by using the wrap text property, however it has turned out that wrapping does not work between two anchored objects. Their adjustment position manually would be a pain in the case of any change.

  B. let all notes as notes, but hiding their numbers

  1. Leaving the two types of notes as standard InDesign notes (so that they are correctly placed at the bottom of the text)
  2. Hide a number of reference in the text and a reference number using character style
  3. Styles of different paragraphs of Appling two to the text of the notes, with two different styles of numbering
  4. Creating a cross-reference as A solution and placing it after the hidden reference number

  This one seemed smart enough, until I discovered this numbering does not work in the set of notes (each note is numbered '1'). InDesign seems to treat as separate stories, regardless of what the parameters of numbering of lists. AAARGH.

  C. let all notes as notes, hiding their numbers, creating objects of the lively with reference numbers

  1. Leaving the two types of notes notes standard - like solution B
  2. Hide a number of reference in the text and a reference number - like solution B
  3. Appling different paragraph styles both in the text of the notes, but without no numbering
  4. Inserting a block of text anchored after each number reference (hidden) in the text
  5. Applying numbering to anchored text frames (using the paragraph style)
  6. Insertion of a reference at the beginning of each reference text, pointing to the numbering of the corresponding anchor text block

  This can actually work, but for me it is neither elegant nor reliable. For now I am stuck looking for a way to insert cross-references in the text of the notes automatically (there are about 250 notes, then that would be useful).

  So that is where I am right now. All advice?

  Thanks for reading all this

  Waldek

  IMHO, the cooler is to make invisible the base (appeal and references) numbering notes replacing the note calls by a block of text, anchored with automatic numbering [2 = object styles styles para 2 + 2 lists numbering] and references the references on those paragraph styles 2 remark.

  If you need a numbering on doc, easier, but if for example per page, just restart the 2 numbers per page for each page!

  As the only 250 notes, do this manually! Not really need a script! It's very fast! (~ 1 hour to do!)

  Of course, when it's done, let's do it!

  

  On all the doc:

  

  Per page: