MAX does not display the option "features an Interfaces"-not able to configure any device
Hi all
I am facing a weird problem. I have LV2009 SP1, MAX 4.6 and DAQ 8.9.5 installed in my PC. Note here that LV2009 SP1 is accompanied by DAQ 4.6.2 9.0 & MAX. But for a project to support that I installed DAQ 8.9.5 & 4.6.0.Now MAX MAX displays only the 'Software' and the 'IVI Drivers"under my system and also lists the"Remote System". But there is no list of the devices and Interfaces. What could be the problem? When I upgraded to the DAQ 9.0, MAX was perfect. But I can't use it for my project because the DAQ 9.0 architecture is very different from older versions (one is that it requires a manual uninstall of the old versions of data acquisition before installing important DAQ 9.0). That being said it's that DAQ 8.9.5 cannot be used with LV2009 SP1? Should I install a patch for it? Any help would be greatly appreciated.
Thank you
Luxama
Sounds like a bad install DAQmx - try repair the installation
Tags: NI Software
Similar Questions
-
MAX does not see the devices and interfaces
Hello
Just got a laptop computer to support the lab and installed Labview. For reasons that I don't have understands THAT MAX does not see the com and USB ports in the laptop. The IT Department gacve my rights to admin ID. Any ideas what's happening?
Kind regards
Kaspar
Dennis, as usual, is correct. Please check if you have installed NI-VISA. There is an article in the knowledge base on the way in which com ports are not in MAX unless NI-VISA is installed. The link to this article is below.
http://digital.NI.com/public.nsf/allkb/1FAB687036A2D85B862571490072307A?OpenDocument
-
MAX does not see the cards as DAQmx
I have three cards OR in my machine: PCI-6602, 6120-PCI and PCI-MIO-16-4 (aka PCI-6040E). For some reason any my measurement & automation explore (MAX) does not see them I expect. He sees the card PCI - MIO in the DAQmx and NOR-traditional DAQ records, but he sees that the other two in the traditional NO-DAQ folder. I should be seeing them all DAQmx AFAIK. I read in a post on this forum that I can be a corrupted database MAX; so, I renamed and restarted does not. I have applications that I programmed in Delphi that see, acess and use all three cards using traditional DAQ, so I know they work, at least to some extent. When I use LabVIEW, he sees only the PCI - MIO map for operations of DAQmx and I'd like to find a way to make all three of them consider DAQmx. I believe all three cards are compatible with traditional DAQ or DAQmx. My installed software versions are: LabVIEW 7.0, MAX 4.2.1.3001, NOR-Spy 2.0.0.16, 1.70 OR-488. 2 NOR-DAQmx 7.0.7f0, NOR-PAL 2.0.0 OR-SWITCH 2.00.49156, NI-VISA 3.1, NOR-DAQ 7.4.4f7 traditional (I also tried 6.9.3f4 version without success).
I hope that it is something with a simple fix.
Thanks in advance to those who take the time to read and respond to this message.
Thank you
Neil
Did you look in the Readme for DAQmx 7.0? It was the first version and these devices were not yet supported. The latest version of DAQmx you can perform with LabVIEW 7.0 is version 8.1. These cards are listed as being supported.
-
I created a my page book epub file, and it works perfectly in iBooks. But it does not appear on my other devices, and the .epub file cannot be successfully sent by e-mail. 5.6.2, iBook 1.5 pages
What's not?
You must check the iBooks category in your OS X system preferences: Panel iCloud: iCloud Drive: Options: Documents Panel. On iOS, you must have enabled to iCloud and in the iCloud Drive location setting iBooks. Also, in iOS parameters: iTunes and App Store, ensure that iBooks is running.
The iBook.epub file is a compressed/compressed and renamed folder that represents a single file to any email client. What do you mean, it cannot be sent correctly - and it's your experience, send, or the failure of the recipient to view the ePub document? What email client?
-
I'm trying to update the firmware on my HP Officejet Pro X451dw (CN463A), but the firmware update fails with the error "This Firmware Updater does not contain updates for your device." More precisely:
- With the help of EWS, I confirmed that my current firmware is very old (it lists the firmware version of BWP1CN1315FR, which means 1315FR, right?, dating almost the time I bought the printer about 3 years ago).
- I downloaded the firmware ("OJP_X451dw_R1640A_updated.dmg") was last updated, copied 'HP Firmware Updater' in /Applications and then he ran.
- It shows my printer in the Device Discovery list. I selected and clicked on continue.
- He thinks for a while, displaying "recovery information...". »
- After a wait of 30 seconds (approx.), it displays "EC Firmware Updater does not contain updates for your device."
Any suggestions?
You're welcome @justkwin.
Here is the utility of a Mac computer:
FTP://g4u0180.Houston.HP.com/FTP4/pub/softlib/software13/printers/pentane/OJP_X451dw_R1548A.dmg
Kind regards
Shlomi
-
MAX does not see COM1 but is VISA. Unable to communicate
I have a service monitor that accepts the TCL commands in Hyperterminal (via RS232/serial). I want to use LabVIEW to send these same commands. MAX does not list COM1 as device available, although he rises to the VISA as possible a choice. For some reason, I can't monitor service to accept orders when I go through LabVIEW and VISA. Yes, I made sure the configuration set in LabVIEW corresponds to what is on the monitor. It depends in MAX not being able to identify the resource COM1? Any ideas on how to solve this problem?
Hi enewburn,
If the COM port does not appear in MAX, then there may be a problem with the serial port itself or the VISA driver. Please, check the following:
1. in the Device Manager, make sure that the serial port is present and there is no exclamations.
2 fix the driver for VISA to ensure that nothing is corrupted. If opossible, use theni website link: http://joule.ni.com/nidu/cds/view/p/id/1370/lang/en
Let me know if this changes behavior!
-
My computer was slow, so I tried to scan all using Windows Defender, and this error message keeps popping up, "the specified service does not exist as an installed device (error Code: 0 x 80070424) I don't know how fx this.» I' of love too see if there is another reliable computer, free softwear that can scan and virus scanning spywear.
Hello
Windows Defender is an antispyware software, not an Antivirus.
If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.
There is nothing to worry.
Using both programs at the same time can cause system conflicts, etc.
If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):
"Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.
Right click and select Properties , ensure that Startup Type is automatic.
Once modified, click apply and OK.
Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"
.
And for now, change startup Vista programs without using Defender, use one of these methods:
"How to use MSCONFIG in Windows Vista"
http://netsquirrel.com/Msconfig/msconfig_vista.html
Or the program Autoruns for FREE:
"V11.21 Autoruns for Windows"
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
And try this method for the analysis of Malware
Scan of Malware in Safe Mode with network.
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
Once in Safe Mode with network, download and run RKill.
RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.
http://www.bleepingcomputer.com/download/rkill/
Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
See you soon.
-
On my laptop Dell Studio 1555 with 32-bit Windows Vista Premium (with SP2), as soon as I connect, I get an error "the application BTTray.exe does not able to initialize correctly. Click OK to terminate the application". Then another pop-up window appears the error information. After awhile, it prompts you to close the program. This happened since I updated the Bluetooth Widcom software from the DELL Web site. I tried to uninstall the software and put it back in place for the DVD that comes with the laptop. But that did not help.
Yesterday, when I tried to connect to the remote Citrix server, so I was able to work remotely, I got the same error for the software Citrix, "the application failed to initialize properly wfcrun32.exe. Click OK to complete the program." Then another pop-up window appears the error information. After awhile, it prompts you to close the program.
My colleague, who also has a laptop with Vista home is able to connect to Citrix without any error. He said he did a lot of configuration changes in the security features in vista.
Is could someone please help me get rid of these annoying errors?I came across a similar story, while answering a different question, earlier today. It seems to involve Dell machines and a corrupt file of the MFC80.dll. If it's useful to you or not, I'm not sure, in any case, you would like to read this link.
2.0 secure Local data RMCPlg.exe and BTTray.exe errors
http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&DL=false&l=en&s=Gen&docid=6CF68D431EAAB41BE040AE0AB6E16686&doclang=enThe previous post, I referred to was this one.
The Groove application error
http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/10c8f8d6-D225-481e-99CA-4e048d401c2c -
HP officejet pro 8500 a910 does give me the option of printing in black and white
Hello
My hp officejet pro 8500 a910 does give me the option of printing in black and white. How choose to print in B & W when the option does not appear under properties?
Thank you.
Hello
Used to print application, click file > print
Click Properties or preferences to access the Printing Preferences dialog box.
Click the Advanced Options button at the bottom of the window.
According to the characteristics of the printer, click on the area of selection of printing in grayscale and as high-quality grayscale or black ink only.
-
I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help
1. did you remove Bootcamp using disk utility?
2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.
-
Acer Aspire E1 471. 8 64-bit Windows.
It does not seem to recognize any boot device.
Already tried:
-F2 for configuration of the bios F9 to restore the default settings, F10 to save and exit and restart.
-boot from usb, dvd... the screen turns black after the screening.
-forcing safe mode or windows recovery screen (System Restore, auto repair, cmd, etc) the screen goes black, too and after about 20 minutes. the blue screen with the unhappy face appears (pc must be restarted)
Any suggestions?
Hi FerminSampo,
We will try to repair the startup entries, I suggest you follow these steps and try to solve the problem of Windows 8 start.
a. starting from hirens CD.
b. try these commands from the command prompt.
Bootrec /fixmbr
Bootrec /fixboot
Bootrec /rebuildbcd
c. restart the computer and check if the problem persists.
-
I paid for the CC photography package ($ 9.99 / month) but when I go in my interface it does give me the option to download photoshop and lightroom. He said just buy now and trying to make me pay all over again.
Hello
Make sure that you are connected to ID Adobe Correct.
For more information, please visit:-https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html
Hope this helps!
-
After update my Pro iPad with iOS 9.3 iPad crashes on Safari. Example I googled something results appear, but I am not able to enter any page
It seems that it is a result of the update. Other users report it, and I also read that Apple is aware of the problem and working on a fix. Be patient and watch for an update. Some have reported that disabling Java script has worked for them. You need to check yourself.
-
My DVD RW drive (E) does not recognize or read any disk inserted.
My DVD RW drive (E) does not recognize or read any disk inserted. I have a desktop HP with Windows Vista home premium. I used to be able to play CDs & DVDs, but also to burn discs on it. Now it will not read discs program even not. This happened earlier & I never understood the problem so I just gave up. Now I need to use a program disk to use a wireless router & I can't because my reader will not read the disc. I already checked the Device Manager and it says that all drivers are at day & work properly.
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
-
Why my audio midi Setup does not recognize my external midi devices?
Why my audio midi Setup does not recognize my external midi devices? The midi interface and all midi devices are connected.
P.S. The icons and the midi interface are all "grayed out" in the midi studio window when I click or double click on it nothing happens.
Maybe you are looking for
-
Change email actions when deleting an email - how to change the parameters to pass to another older instead of the next new when I delete the email that I consult? I want to move to the bottom of the list to the Inbox instead of to the top.
-
I have 4 email address in Thunderbird. How can I add a password for the fourth? It is easy to remove, but I do not know how to add or change. My provider is TurnkeyMail. They say they do not know how to help me and I have to ask to Thunderbird.
-
Any idea people?
-
Using Windows Search, will continue to look after being arrested under XP
Hi I have a small problem I have with Windows Search when I search the file on the key stop cruise always continue to seek help can do
-
Have I not "switchable graphics"?
I have a Pavilion dv7-1130us entertainment notebook pc w/Vista 64 bit OS and a processor AMD Turion x 2. Please explain the steps to determine this function for my laptop. Thank you!