Similar Questions

• placement of components

  Hello...
  I have the problem of the placement of the single on 6 not gates in CMOS_5V (4069BCL_5V)...
  I only want one no door in my circuit... and I chose a doorstep... and press k...
  After that when I am simulating I get error of simulation...
  When I select not IC, I consult only one door instead of IC...
  so I don't know what the problem...
  so please help me

  Hello...
  Thanks for your reply...
  I found the solution to the problem...

• Kodak digital camera c190 digital

  I can not gat my digital camera to transfer pctures to my laptop. I deleted the software and then reinstalled and still, she does not transfer them. Any one with answers please I need your help

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  See you soon. Mick Murphy - Microsoft partner

• Microsoft wants 'check me my identity' on my laptop and I don't have a code.

  * Original title: verify the identity?

  Do not get this,

  For some reason, Microsoft wants 'check me my identity' on my laptop (that I've owned for a year now) or other. I try to do, follow the steps and it asks me to verify my phone number and they will send me a code. I check my phone number, and they send the code. I don't have a code. What now? Why can not Gates and his intrusive Microsoft just leave me alone?

  All responses will be appreciated.

  Hi Mark,

  We apologize for the inconvenience caused to you.

  -Have there been recent changes made on the computer before the show?

  Rest assured that I will do my best to help you solve this problem.

  As a general rule, we need you to check your email address when you use it to create a Microsoft account or when you add it to your existing Microsoft account.

  If you receive a request to verify an email address you do not add to an existing account or to create a new, cancel the check. Could someone else try to use your e-mail address for their account.

  I would like you to check out the links and see if that fixes the problem.

  Why should I verify my email address?

  Two-step verification: FAQ

  Security information for the Microsoft account: FAQ

  If the problem persists, you can contact the technician with the Windows Live support for assistance on this issue.

  Microsoft email support

  Microsoft support chat

  Keep us informed on the status of the issue. We will be happy to help you.

• My new N210 always show "local oscillator 1074118626 does not lock in time.

  Hello

  About error 'local oscillator 1074118626 does not lock in time', I found the thread as here, but in my case, this error only occurred when I used two N210-newly buy.

  When I put the two side of the transmitter, which takes place the error in writing-VI (niUSRP write data Tx (CBD 2D) .vilocal oscillator does not lock in the allotted)

  When I do them as a receiver, that erroor come once again an insider-VI (nuISRP Initiate.vi)local oscillator block does not lock in the allotted)

  I have replaced those two with the old N210 and the error disappear. Why?

  Thank you ~.

  Hi Libby,

  On the firmware and FPGAS, I always make sure that both of them are updated. Thanks for your suggestion.

  Finally, I found the answer to ' why this problem (local oscillator 1074118626 does not lock in time) has occurred "because unsynchronous LO between the two USRP. I had solved the problem after connecting the two USRP with MIMO cable without any change in the LabVIEW code.

  I do not know why the old USRP didn't need this synch thing... anyway... I am pleased that my problem has been resolved.

• LM324 oscillator does not work, why?

  It is a typical noob question, I'm afraid...

  In the datasheet of the LM324 I found (page 13), a circuit for an oscillator design. http://www.TI.com/lit/DS/symlink/LM324-n.PDF

  I tried to reproduce this oscillator in MultiSim, but it does not work as it is supposed to; even measure voltages higher than the voltage of the source?

  Can someone tell me what I am doing wrong?

  TYhnak you, it works fine now.

  The model manuf. button shows only ITT/LM324A_2

  Perhaps it is also because of my old version 10?

  Thnaks you very very well!

  Martin

• EJECT d gate does not open

  I can not eject d gate on the processor in order to burn CDs of music... when I go to my computer section of the start in drive d, then press eject disk, nothing happens... said section is not responding... worked 2 days ago... all the other functions work except in windows media player... burn

  More likely, you have a disk in the drive. Unfold a paper clip. There is a very small pin hole on the front of the cd/dvd rom. Insert the paper clip into the hole and push until the door opens. Remove the cd and see if it will work normally without any disk in it.

  

• whenever I restart my computer, I get a message that says ASUS Express Gate Installation was incomplete, not sure what that means?

  I recently bought a computer is restored to nine that I has a 232 GB HDD (which was my drive c :) in it, so I had technicians install my 500 GB HDD (this is my f) also for the extra space.)  I now have the computer startup problems and when I was finally able to she is trying to load my f as my c: drive and I don't know what happened.  Also whenever I restart my computer, I get a message that says ASUS Express Gate Installation was incomplete, not sure what that means?  can someone help me?

  Original title: hard drives

  ASUS Express Gate installation to install Express Gate on your computer mount the DVD media into the optical drive. The drivers tab is displayed if your computer has enabled the Autorun feature. . 2. click on the utilities, tab, then on ASUS Express Gate Installer.3.Select the installation language and click. Ok. 4. the InstallShield Wizard for Express Gate appears. Click next to continue. 5. Select the disk volume target for you to install Express Gate. If you have several volumes and operating system installed on your hard drive, it is recommended to install Express Gate on Volume C click next to continue. 6 follow the instructions on the screen to complete the installation. Partition drive letter can someone have assigned wrong Solution of dough will be if you have Windows disk installation and reinstall windows on the Page of the score make Partition

• I deleted Windows Defender on Windows Vista and tried to download and reinstall windows Defender but I gat a message that comes up saying that I should not install windows defender, because it came with the computer.

  deleted the windows on windows defender and impossible to reinstall! Message comes out and says that I should not install windows defender, because it came with windows vista. How can I try to fix it when I have windows Defender on my computer?

  You can not delete Defender in Vista.

  It is part of the Vista operating system.

  You can only activate / it:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Enable or disable the Windows Defender

  Many anti-virus have conflict Defender (McAfee, AVG, etc.), and turn it out / conflict with it.

  Microsoft Security Essentials, it turns off because it has its own version.

  See you soon.

  Mick Murphy - Microsoft partner

• a preparation free gata with GK Publications cd does not run on windows 7 Home Basic.

  A cd of free door preparation with GK Publications does not run on windows 7 Home Basic.

  I have buyed a book for the preparation of the door named GK Department with a cd inside, it includes the series of door documents test to practice. But it is to create an error message problem showing that Microsoft.jet.OLEDB.4.0' is not regestered on the local computer.    Please sort out the problem as soon as possible.

  Hi preyashi,

  Thanks for posting your question in the Microsoft community forum!

  I understand that you are having problems running a program from a CD on your computer. I'll help you solve the problem. To be able to understand the question in a better way, I would like to ask you a few questions.

  (1) did you make any changes before the show?

  (2) you are able to run the other Setup program on your computer?

  Senario 1:

  See if it is compatible with Windows 7.

  If this isn't the case, you could try installing in compatibility mode for Windows Vista or Windows XP.

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  Use the following steps:

  (1) right click on the program.

  (2) click on Properties.

  (3) click on the tab compatibility.

  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If compatibility is not successful, then try and run the program compatibility problems:

  1. open the troubleshooting program compatibility Troubleshooter by clicking the Start button.

  Then click on Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under programs, click on run programs for previous versions of Windows.

  2. follow the instructions in the troubleshooting.

  If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.

  Senario 2:

  The behavior you describe is expected if your application runs in 64-bit mode, all components that use must also be 64-bit. There is no 64-bit Jet OLE DB Provider, so that you get the message as described. You will receive a similar error when you try to connect to a database by using OLE DB or ODBC if there is no 64-bit of the specified OLE DB provider or ODBC driver version.

  This problem occurs only in applications that run in 64-bit mode. Compiling the application so that it works only in 32-bit mode is the current best solution.

  You may need to contact the manufacturer of the program to find out how to set the path target to x 86.

  More information

  32-bit and 64-bit Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  Please let me know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved in Microsoft Windows.

• Could not start process replicate except stop another using the Golden Gate

  Description of the problem:

  1. There are more than 30 ways repeated in the target (Oracle-> SQLServer), and they work fine.

  2. when I add a new replicat process and start it, not start successfully with the status of "stopped".  However, when I stop a process previous replicat and then start this new replica, it works very well.

  Error information:

  2016-01-18 11:21:17 ERROR OGG - 01557 Oracle GoldenGate delivery for SQL Server, REPTAN.prm: OLE DB error: cannot open the data source. Error code 0 x 80070583 detail: OLE DB: CoInitialize.

  2016-01-18 11:21:17 ERROR OGG - 01668 Oracle GoldenGate delivery for SQL Server, REPTAN.prm: PROCESS ABENDING.

  Error code:

  OGG-01557, OGG-01668

  Product: Oracle GoldenGate

  Version: 12.1.2.1.0

  OS: Microsoft Windows 64(64-bit)-2008R2 x

  Database: Microsoft SQL Server-2005 x 64 SP2

  Connection Type problem: no, to the other databases Oracle GoldenGate extract / Replicat added issue

  Hello

  If your ODBC has been set correctly?

  Do you have any grouping of data source or ODBC connections? Have you checked it?

  Please share the full report of the added replicat process file.

  Kind regards

  Veera

• Incident rule does not for model OEM 12 c of the Golden Gate (12.1.0.5 window)

  Hi gurus,

  I practice OEM 12 c, I created Incident the rule for the target database Type that works well.

  Today morning, I created model extracted and Manager, GoldenGate and applied on the GG target, after created Incident rule with properties below

  Targets: Oracle GoldenGate. Oracle GoldenGate extract; Oracle GoldenGate Manager

  Article: incoming events and events updates

  Type: Alert metric (selected option button: all events of type alert metric)

  
  

  Add Action: Condition: always perform the actions

  Notice: E-mail me
  

  But I do not have the mail, even I kill or stop the process of mgr/extract

  When I check in the ENTERPRISE > SURVEILLANCE > INCIDENT MANAGER

  I can see the target are down and event showing her stockings.

  If someone body worked on this case. Please help me solve this problem.

  Thanks and greetings

  Jamsher Khan

  Try to use the button simulate rules in the window Incident rules.  It will show you the actions for different types of measures/events.   One thing I see here could be that the target down, will not appear in the alert metric type, this is a category of its own called target availability

• Colpitts oscillator does not

  Hello

  This circuit is exactly similar to that of the 830 book "Electronic Devices" page by Floyd 8th edition. I have triplechecked I have the same circuit in multisim, but I still don't understand the circuit to oscillate.

  Can someone please help? I spent hours already with this... Here is the circuit:

  

  When I click the osciloscope, I get a reading of 0V, whatever happens. DC features look good. The file that I use is attached.

  Thanks in advance!

  Hi Triplebig,

  I imported the netlist LTspice Multisim; the only difference is that I use the 2N3904 database Multisim instead of LTspice. I have install the circuit to run the transient analysis.

• Apple does not list a country the list code to add trust number (validation of 2 steps)

  I used the gate 2 years with my number + 849xxxxxxx

  Today I turn off validation of 2 steps to config something, so I tried to reactivate it.

  Then, I realized that Apple updated the list of country code, and this is totally wrong with the Viet Nam.

  It is + 848 (Viet Nam) instead of + 84 (Viet Nam) as before.

  + 848 is a new type of phone number here in the Viet Nam, many people here still use the old kind of number like me (+ 849), not the + 848. That's why I can't re - activate 2 validation of steps again.

  My friends also had the same problem as mine. I think that Apple should give the country code option to + 84 (Viet Nam), not the + 848 (Viet Nam) as soon as POSSIBLE, now that my account is not protected because of this error.

  Thank you.

  I totally agree with you.

  I have not even worse, I can't receive the verification Code when loging itunesconnect.apple.com, so I can't download the new version of my application.

  I hope that Apple will fix it as soon as POSSIBLE.

• Why Firefox does not have a video, but Chrome is?

  I tried to watch a video using Firefox, but the window where the video should play never loaded. It remained just a black image. So, I tried the same page using Chrome, just to make sure that the site was good and the video played using the Chrome browser.

  The site, I tried to display in Forefox, but would not play the video, was:

  http://www.thedailyshow.com/full-episodes/Wed-January-15-2014-Robert-Gates

  I have flash player 11.9.900.700 installed and activated plugin (add-o) n.

  I don't know what else to try to verify, or even if this video is a flash video.