Not good with 2 recovery cd recovery OS?

Similar Questions

• Network adapter driver does not work with the recovery discs provided by hp

  Hello

  My wireless light does not illuminate. The network adapter driver does not install from the recovery of the driver CD.

  Here is the hardware ID. Please provide a link to the drivers:

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C

  PCI\VEN_10EC & DEV_8176 & CC_028000

  PCI\VEN_10EC & DEV_8176 & CC_0280

  Thank you

  You are the very welcome.

  It does not sound like a heat problem.

  I don't know a lot about the repair of hardware issues beyond replacement memory and hard drives.

  I could try to clean the area of fan/radiator with a can of compressed air and see if that clears any dust that may accumulate.

  To do this, disconnect the laptop from the AC adapter and remove the battery.

  Insert a rod through the air fan to keep the blades turning when you spray air.

  Spray through the air intake fan and watch to see the dust out of the exhaust.

  Repeat once or twice and blow air from the other direction of the drain line to the fan.

  The other driver, you need is the driver of protection Protectsmart hard.

  See if it works.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116584-1&cc=us&DLC=en&LC=en&OS=4063&product=5278311&sw_lang=

• PROTECTED R600-11 q recovers--not even with the recovery CD

  Hello

  I use a protected R600-11 q. It runs Windows Vista. In recent weeks, it will start is no longer.

  (1) any regular boot (including the security modes & last configuration) translates a text in black screen, with the error message:

  "Unable to start Windows. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you don't have this disk, contact your computer manufacture or the system administrator.
  * Status: 0 xC0000001
  "Info: * there was an unexpected error."

  (2) holding F8 at startup-> there is NO option for recovery. All other options cause the ' status: 0 xC0000001 "error.

  (3) I ran using control memory Windows program (holding F2 at startup, then select it) and it found no errors.

  4) there is an option F10 at startup. It gives you some sort of command line option [/ NOEXECUTE = OPTIN] where you can type commands. I don't know what it is for.

  (5) so I ordered the recovery CD on the Toshiba site. When I start the laptop using the CD, it starts to load Windows. First of all, there are a text loading bar. Then a loading graphic bar. When it is complete the screen becomes black. A cursor appears so (an arrow that you can actually move the button). Then nothing. Simply, the screen stays black with the cursor.

  Someone at - it ideas what the problem with my laptop?
  What shoud I do or try next?

  Thanks for your reply.

  It is not easy to say what may be the problem. Set the BIOS on the settings by default and to use the recovery disk again.

• Reinstall Windows XP on Acer Aspire One - computer did not come with a recovery CD

  How to use the product key that came with my Acer Aspire one to reinstall Windows XP without CD?

  Hi MariaMouzes

  You can restore your computer configuration using the procedure described in the link below.

  How can I restore my system using eRecovery management program?

  http://Acer.custhelp.com/app/answers/detail/A_ID/12869

  Or you can buy the recovery media by hint at the link below.

  https://store.Acer.com/store/Acerna/DisplayDataValidationServicePage

  Good luck.

• 7520 HP all-in-one printer prints photos not good with my Windows machines

  I have several computers.  Everything works fine with the printer in the Windows environment.  I have an iPad and a MACbook PRO with Maverick 10.9.4.   The pictures are terrible when I print with one of these devices.   It looks almost like a negative image.   I checked for the drivers updated, etc. for the Mac.   The ink is HP and levels are good.  It works fine with my PC computers, but not my Apple devices.   I checked the preverences of the APPLE system.   It does seem that the photographs.  Text prints very well.  Any suggestions?

  Hello cpsimonand welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you run in photo printing questions. I would like to help!

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update.

  After the updates, I recommend reinstalling the Photosmart HP 7520 e-all-in-one printer drivers.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Ink is full, but the print quality is not good with HP Officejet 7000

  I was printing on CD labels/stickers just now and noticed that even if I chose Normal / the best print quality, the result is always the same: it looks faded, and as if I'm out of ink.

  There are not any warnings I was running out of ink, but I replaced the cartridge anyway. However, print quality has remained the same. Should I set in the settings? Help.

  PS, It might be useful to know that, because we bought this last end of July 2010, we only used two or three times, never until today.

  I hope you help me find a solution for this. Thank you!

  Apparently, the way out is the cleaning cartridge and harmonizing.

• I disabled my sound card I think, I'm not good with computers, and I can't speak with someone on the internet! its really annoying!

  I don't know what to do...

  Hello

  I suggest you try to run this under fixit and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  It will be useful.

• BOOTMGR is missing. Get the message "this version of the system recovery options is not compatible with the version that you want to repair...» »

  Two days to try to solve this problem of complete.  Vista Home Premium (64-bit) has been installed more than 6 months ago.  With the legal copy in the computer, I can choose the repair, it shows me me partition Windows Vista Home Premium.  I don't get the system recovery options, but I get a window that says «the version of the system recovery options is not compatible with the version of windows that you want to repair...» ». I loaded the original drivers for the motherboard.  I started in safe mode, and I can see the different folders.  It tells me that everything is there. Does anyone have a solution for this? I use a product called '360 °' for regular backups, but backups are on a network drive.

  Thanks for the suggestions!

  Here is a link to some people who had the same problem and solved: http://keznews.com/forum/viewtopic.php?f=2&t=20665.  It seems to have something to do with the help of a record of 32-bit with 64-bit recovery (or something of the sort).

  I hope this helps.  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Reinstall Windows 7 - laptop does not come with a disc or I do not have the recovery partition, all I have is the product key

  Hello

  I am running windows 7 Professional on my laptop. I need to know how to format and re install the operating system. My laptop does not come with a disc or I do not have the recovery partition, all I have is the product key. I would also like to know the pilots.

  Kind regards

  Aty.

  Former title: reinstalling Windows 7

  Well, your only option is to get the Windows 7 Home Premium disc by following the instructions that I described in the following article:

  How to: What are my options for Windows 7 reinstall media?

  Then follow the instructions to retrieve reinstall them:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

  But before you do, make sure that you get the Windows 7 Professional product key if you need to reapply in the future:

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)

  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features

• Is it a good idea to replace the 2.5 "HDD (with partition recovery inside) with a SSD?

  Hi all

  I have a ThinkPad E420 with the recovery partition in the HARD drive. I intend to sell the excessive 750 GB 5400 RPM HARD drive and replace it with a 120 GB SSD, because I need responsiveness instead of ability. Is this a good idea?

  Thanks in advance.

  Best regards

  Haris

  Lenovo: 'as sensor airbag, Active Protection System can detect sudden changes in motion and temporarily stop the hard drive to help protect your valuable data against certain accidents that might happen because of cell phone accidents every day."

  This tool is designed to protect not the mechanics of the SSDS. It would not apply in your case.

• After an automatic update of Windows and stop, Firefox does not remember my tabs open at startup. Better Privacy does interfere with Crash Recovery somehow?

  Better Privacy does interfere with Crash Recovery somehow? My computer is automatically installed a Windows Update at 03:00 and switch off. When I started out, I had to restart Firefox. Firefox came without any of the tabs that were open when the PC went to bed the previous night. I spent an hour looking for what happened to my tabs, without success.

  This has happened

  Just once or twice

  == Automatic update of Windows shut down my computer in the middle of the night.

  Hello.

  It is possible that it was by force the windows closed so your firefox which makes you forget... Have you tried to crash your Firefox to see if the session is not restored?

  To plant your Firefox, simply there open, press CTRL + SHIFT + ESC and then, on the process tab in the window that appears, complete the process firefox.exe. That will force Firefox to close at this moment. Do start again. If it works, ok, so it may have been a case isolate. My recommendation is to configure your windows does not install updates without your intervention. Choose something like 'ask me what to do' or something like that.

• System does not come with recovery disk

  Hi all

  I bought the HP CMT 8300 (preload win 8) system but it does not come with recovery cd. What I have to buy eventually or should belong to the system as free?

  Thanks a lot for any advice.

  All the best

  Hello

  No, the machines now come without recovery media, you can create a game by yourself:

  http://support.HP.com/us-en/document/c03481733

  There is also a recovery on your computer partition, please keep intact, as you may need it someday.

  Kind regards.

• Aspire S3 - will not start with the disc of recovery USB USB ports.

  I try to use a USB drive to recovery W8 (made with the acer recovery management) in my S3-391.  The computer starts not with a USB key into one of the ports.  When turned on, the computer will display the "Acer" screen, then the screen goes black, then the "Acer" screen is displayed again, and then the screen goes black again.  It buckle like that until I hold down the power button for a hard cock.  Pressing F2 or delete only put the BIOS or something.  The computer starts well W8 and BIOS without anything connected to the USB ports.  I'm still under BIOS v. 2.07, but I don't know if that has anything to do with it, since I can't do the BIOS with USB in. I've never updated a BIOS but I'm decently computer and could probably google my way through it, if you think it will help.

  Everyone knows that or something like that?

  Thank you.

  Well, I'm happy that we're sorted with the recovery disk!

  With respect to the SSD, I found this.

• Hard Drive crashed with Vista on it - could not return it with ACER recovery disks

  Got a new hard drive with no operating system on it and the recovery discs ACER did not work.  I want to upgrade to Windows 7, but has no system of Vista on the ACER computer

  * original title - Hard Drive has crashed with Vista above - could not return it with ACER recovery disks. What to do next... upgrade to Windows 7 *.

  Got a new hard drive with no operating system on it and the recovery discs ACER did not work.  I want to upgrade to Windows 7, but has no system of Vista on the ACER computer

  Hey Tim-Blair

  If you have problems with the acer acer recovery disks give a call

  you would normally replace your boot order to the shape, the insertion of dvd disc the first acer recovery disk and restart from the recovery of the boot process

  http://www.Acer.com/worldwide/support/

  Walter, the time zone traveller

• How to restart with the recovery CD, when the CD player is not recognizing any cd/dvd?

  How do I restart my Toshiba laptop [Vista Home Premium SP2]

  with my recovery CD / else, what CD drive isn't grateful no matter what CD / DVD.

  I tried to restore any of the other points, but no date is available before sept2010.

  Ferris

  Hello

  To get started with a Windows disc set 1 boot on CD/DVD order.

  / Settings (BIOS/CMOS) often F2 as you start then look at screen - 1 place the CD/DVD
  in the boot order (remember later). F12 on most Toshiba computers also allows you
  to set the order of boot for a start.

  Restore points are only usually return 2 weeks or less and backup or repair methods are needed
  After this period. Restore points only reset the system functions and backup any programs or
  data.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.