Not possible to install Win98 SE with recovery CD

Similar Questions

• After the crash of the system, it is not possible to install the program with the old key. How to reinstall?

  My CC is which until September, but after systemcrash I can't reinstall it with the old key becouse that's already in use.

  How to manage?

  Greetings from Holland,

  Jan Goosen

  Hello

  There is no serial required key / condition to install/activate the creative products of cloud. You can download the creative application of the Cloud on the link as follows and connect you with the Adobe ID (email) under which the CC members is bought, go to the "' Apps'" tab at the top and will get the list of products CC that you can download/install and run them in full.

  Download Adobe Creative cloud apps | Free trial of Adobe Creative Cloud

  Thank you.

• Possible to install Win 8 of recovery in Legacy Bios mode discs?

  Is it possible to install Win 8 of recovery disks in Legacy Bios instead of UEFI mode, as it comes with?

  Or will install it automatically use UEFI mode and configure start secure even if your bios is set to Legacy Bios installation mode for Windows 8?

  In addition,

  If I install a clean copy of windows 8 from the official Microsoft Windows 8 Core RTM dvd (same version as my system) and it detects and accepts the built in Win 8 product key and key of CD which is built in my Bios and it activates as valid installation and activeted - this void my warranty?

  (It's the same exact Windows version and license I paid HP for except it has not added recovery partition or software of HP so I don't think he would cancel warranty... especially since installation has accepted the built in bios keys - but is this correct?)

  Don't know everything if the recovery will install in legacy mode, try and see.

  Install a different copy of the same version do not cancel the warranty. However sometimes HP will require you to reinstall OS original to avoid the possibility of problems or if you need warranty service. Don't forget to burn your defined recovery disk before destroying the origianl OS.

  You can also find it advantageous to burn them to dvd or save to hard drive USB external your C:\SwSetup file with drivers and software provided on the original laptop. Save a lot of time to download on another computer and transfer it later.

• It is not possible to install Adobe Flash player 11.1

  It is not possible to install Adobe Flash player in the browser, it works without problem?

  There are 2 versions of Adobe Flash:

  • an ActiveX version for IE only
  • a plug-in version for most of the other browsers including Firefox
  • On a Windows system, you must always update both individually.

  You have the Plugin version 9.0.45 installed Firefox - a very old version. In modules > Plugins you should see "Shockwave Flash (version)".

  Make sure that your Plugins often-> http://www.mozilla.org/en-US/plugincheck/

  • We know only the Plugins the more popular/used by this page
  • page detects only installed, activated Plugins

  Install or update Adobe Flash

  1. With Firefox, click on the following link and SAVE the download on your desktop, so you can find it later. Clear all of the items on this page that you do not want to download (i.e., "McAfee Security Scan Plus"):
     • http://get.Adobe.com/flashplayer
  2. When the download is complete, close Firefox (file > button OR exit Firefox > exit)
  3. Click or double-click the file that you just saved on your desktop
     • In the install window that appears, select the check box to the left of "I read and...» "to place a check mark in the box of
     • The button 'Install' in the lower right corner is now highlighted, click it.
     • Installation is quick.
  4. Launch Firefox and test your installation here: https://www.adobe.com/software/flash/about/
  5. To the update/install the ActiveX for IE onlyversion, repeat the process, but use IE to go to the site above.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plug-in for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Is it possible to install Windows XP with USB / (Pendrives) with a CD?

  is it possible to install windows xp with USB / (Pendrives) with a CD?
  my CD drive is not working... but I need to upgrade xp... How do with usb?
  a pls answer

  * original title - request for installtion xp... *.

  is it possible to install windows xp with USB / (Pendrives) with a CD?
  my CD drive is not working... but I need to upgrade xp... How do with usb?
  a pls answer

  * original title - request for installtion xp... *.

  Installation of Windows Xp from a usb key involves a lot more than simply copy the files from one windows on a USB disk. It is much more difficult than don't imagine most (but not impossible). I did it a few times. Read the instructions on the two links below. The first link below is your best bet. You are not likely to do things immediately. It's ok, we are here...

  Install Windows XP using USB Flash disk / Flash Drive - step-by-step Guide

  Install XP from USB - reboot.pro

• Is it possible to install printshop 23 with Windows 7 64 bit?

  Is it possible to install printshop 23 with windows 7 64 bit. The dialog box does not appear again and I have to navigate to AutoPlay, and then to run setup.exe, but nothing happens after that. Not too technical solutions.

  Original title: The Printshop 23

  See the thread below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/printshop-23-compatibility-with-Windows-7-64-bit/f34fd7af-F9DD-460c-8AC5-eaaac3b031cc

• I get the ssd drive, I need to buy recovery DVDs for y500 to install new windows with recovery

  I get the ssd drive, I need to buy recovery DVDs for y500 to install new windows with recovery

  How much it costs

  I need to perform a recovery for ssd only

  I need direct link for that

  Nice day.

  He was never a way I know of to download games Windows OEM Lenovo recovery disks. That the process is managed by Service, you'll need to contact them directly (see info below). If I understand correctly, they will confirm your OS by checking the serial number of your machine.

  I hope this helps.

  Kind regards.

• Satellite M70-151 - not possible to install new HDD

  Hello

  I have a problem with my Satellite M70-151. bunch of old hard drive (100 GB Hitachi) reached the Windows XP screen then just ends with a blue screen a turn off laptop, immediately. I had to restore my data with an application file-rescue of another PC. It was not possible to start from old hard drive yet.

  Then I bought a Western Digital SATA II 250 GB hard drive that put my Windows XP CD in DVD player installed and tried to start. The laptop turns off as soon as the laptop computer tried to access the HARD disk.
  Thought, it was question of SATA II disk and tried a Samsung 160 GB Sata I - same result.

  BIOS recognizes the correct drives.

  If I try to boot from old hard drive, it shows the issue I mentioned first, but as before it reaches the Windows XP Boot screen before moving on to the blue screen before turning off the laptop. So start goes further than the boot with new hard drives

  The Windows XP CD I used is not the restore CD that came with the laptop, but a normal license.

  The heat is not a problem, I cleaned the CPU fan there is enough space to breathe the cold air mobile, the temperature is ok.

  * My questions are: *.

  Is there any special application running on laptops satellite, like special software of Toshiba, perhaps Backup, should I be aware of?
  What I need to preformat the hard drive, Toshiba-Hardware will recognize the hard drive?

  It would be great to get help on this issue, because I'm out of ideas. Thanks in advance!

  André

  Hello Andrew

  This behavior is very strange. I have some old Satellite M70-159 with 100 GB HARD drive. I also tested how it will work with a 250 GB HARD drive and all is well.
  On two drives, I have installed WXP using the Toshiba recovery image.

  I answer your two questions No. to install Windows XP Home edition on this model of laptop you don't need some special Toshiba application or a piece of software.
  HDD should be recognized correctly by the BIOS and the Windows XP Home edition installation procedure should work well.
  What you can try is to set the BIOS to the default settings and try again.

  The strange thing for me is that judgment. The blue screen tells me that there may be some serious hardware problem, the HARD drive controller might be. It's really not easy to say with certainty what can be the problem.

• Is it possible to install Vista 64 with and key to Vista 32 on Satellite A200

  Hey there ' All!

  I bought a Satellite A200 coming with a 32-bit Home premium Vista. I also added 4 GB of RAM, and I would like to install the 64 version to take advantage of the full range of memory.
  Does anyone know if it is possible to get a 'free' DVD of the corresponding 64-bit version?

  Thank you

  To my knowledge, this is NOT possible. Each single Vista operating system use a different key!
  If you need a 64 bit OS then you must buy it and you will get a new key!

• TC 7.3.1 not possible to install on endpoints

  Hello

  We ran into Bug CSCur63326 presentation question on / off with TC and MCU codec.

  According to the Bug, the problem came in TC7.2.1 and must be fixed in TC 7.3.1 which is downloadable since Tuesday.

  So, I downloaded the SW for a variety of endpoints that we have.

  Unfortunately, it is not possible to upgrade to this version, any version prior to, or what type.

  Once the SW is downloaded and the installation starts, it does not directly after:

  'Check the signature on the firmware image' begins. According to the "installimage.log" of the codec it says failure of the verification of signatures! »

  When I tried the same thing with my EX90, connected on the public internet behind a DSL router, verifying signature takes forever, but the update is successful.

  Someone at - it an idea?

  Best regards, hans

  Hi, check again you get the download software appropriate for your codecs. Even if they all run TC software, there are different flavors, so be sure that corresponds to the ID software (such as s52000).

• Is it possible to install two schemas with different time zones?

  Hello
  Is it possible to configure a schema with a different zone in the same instance of oracle?
  Thanks in advance for your answers.
  
  -Best regards,.
  ENR

  Depend on more or less, now, you want to do.

  ALTER session set time_zone = work my_time_zone but you need to configure for all sessions that affect patterns

  HTH
  Antonio NAVARRO

• Not possible to install the driver for netbook with a screen resolution 1024 x 576

  Hi I have a wireless all-in-one printer 6180.

  I tried to install the driver, so I can print from my new HP compaq mini 110 c netbook, but when the driver installation is running it stops with the error that the resolution of the computer screen is less than the required minimum. the computer has 1024 x 576 and the recommended minimum 800 x 600. Any help will be very appreciated!

  Netbooker wrote:

  Hi I have a wireless all-in-one printer 6180.

  I tried to install the driver, so I can print from my new HP compaq mini 110 c netbook, but when the driver installation is running it stops with the error that the resolution of the computer screen is less than the required minimum. the computer has 1024 x 576 and the recommended minimum 800 x 600. Any help will be very appreciated!

  The procedure described in this page may solve your problem.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

• Satellite A60: Not possible to install hotkeys & power saver - code: 0x7E

  I have a Satellite a60 laptop
  I installed windows xp home sp2.
  I downloaded the drivers from the toshiba site and I met problems with three of the programs.
  one is the 'Hotkey utility"which does not work and the only (when run in the CMD window)"program too big to fit in memory"message and does nothing.

  the second is with the hotkeys "display" utility which after installed said that "driver is not found.

  the third it 'energy savings' which, when installed alone gives an error: "a fatal error has occurred. "This program will be terminated code: 0x7E.

  What should I do to solve these problems? Help, please
  Thank you
  Ohad

  Hello

  Why do you not use the Toshiba Recovery CD?
  On this CD, all of the programs, tools, and drivers of Toshiba are preinstalled and should work without any problems. The installation is very easy.

• Not possible to install the printer on the Qosmio F50

  I have a Qosmio F50 - 10 M, running on Vista 32 bit SP2.
  I tried several times to install a new color printer HP Laserjet MFP276nw 200 without success. The error text is not specific...
  The installation software, I should contact my provider of system support.
  Well, I'm here...

  Does anyone have any ideas how to install this printer on my system?

  Kind regards
  Kai

  To be honest with this problem. If your laptop works well, and the OS is stable why laptop of the manufacturer must be responsible if there is a problem with the installation of the software of third party?

  In my opinion, you should contact the printer manufacturer software and ask why you cannot install their software on many working Windows System. I use HP 120 Envy with my machine and I had no problem at all (win7 64 bit).

• May not know what is the problem with recovery DVDs

  Last year, just after if my phone is turned on, I created 4 DVDs as such: http://i56.tinypic.com/6i79rn.jpg

  Recovery DVD disc 1
  Recovery DVD disc 2
  Recovery DVD 3 disc
  64-bit Windows recovery environment

  My laptop is Qosmio F60 - 14R, with Windows 7 Home Premium.

  Now what I want to do is to format my laptop and re - install windows 7 Home premium using these 4 DVDs. However, I can't understand why I can't reinstall or get the laptop to factory State.

  This wasted 8 straight hours of my time and I frustrated by many. You kindly tell me what I need to do? I'm lost!

  > However, I can't understand why I can't reinstall or get the laptop to factory State.
  S just put the first disc in the CD/DVD drive and the start of this drive and then follow the instructions on the screen. :)

  You put the disk environment to win always, but you should put the first DVD