Possible to install Win 8 of recovery in Legacy Bios mode discs?

Similar Questions

• Is it possible to install WIN 7 32 bit on Qosmio X 500 - 167

  Hello

  is it possible to install WIN 7 32 bit on a Qosmio X 500 167
  Where can I get the drivers?

  Thank you

  Hello

  Of course you can install Windows 7 on this laptop why not?

  Even if Win 7 32-bit drivers are not released on the European driver Toshiba page, you could install this OS.

  Most devices use the same drivers. For example, you can check out 32-bit drivers for X 300 series.

  If you can check as well

• Is it possible to install Win XP on Satellite T110?

  IS IT POSSIBLE TO INSTALL WINDOWS XP FOR TOSHIBA SATELLITE T110.
  BECAUSE WHEN I START INSTALLING XP IT SAYS SOMETHING "HDD ERROR" PRESS F3 YOU QUIT SMOKING.

  WHAT SHOULD I DO?

  Of course its possible.
  Win XP does not recognize the HARD drive due to lack of SATA driver.
  Add driver SATA during the installation procedure.
  The SATA drivers are part of Intel Storage Manager, which you can download from the Toshiba UE driver page.

• Not possible to install Win98 SE with recovery CD

  I tried to reinstall Win98 SE with the supplied restore CD. After turning on the laptop while pressing 'C', the following error message appeared message

  Invalid drive specification
  Path not found - C:\TOOLS\TOSCDROM. SYS

  I copied the TOSCDROM file. SYS in the TOOLS directory, but it did not help. It is perhaps interesting to know, that I installed a WIN 2000 update after installation of WIN98.

  Hello

  It is possible that you need to install the CD-ROM driver before you start the procedure of recovery since the Toshiba CD.
  I put t you know the unit, but please check the page of the Toshiba driver for drivers for Win98.

• (How / what is possible) to install Win 98SE on my laptop

  Hello
  I bought a Satellite 5200 903.

  And in my business I have special software for my machines and this software only works with windows 98/98SE.
  So I tried to install the system.

  But when I place my system cd to my laptop, appears first the Installer menu, I am agree pressing on enter, and a black screen appears and stuck.

  I don't know what to do, I've tried everything
  Make new partitions using fdisk (they are FAT32)
  Clean all formatted left etc.
  Nothing helpes.

  I have too many proposals: laptop do not support windows, due to hardware or BIOS does not work with win 98.

  Help, please!

  Hello

  If you want to use the software on XP I only compatible with Win 98SE, you can enable compatibility mode.
  Please consult this document:
  http://support.toshiba-tro.de/KB0/FAQ5B016L0009R01.htm

  Good bye

• Pavilion a6009n: possibility to install Win 7 on Pavilion a6009n

  Win7 can successfully run on this hardware?  Currently, there is an older xp operating system cannot be updated because the browser will not load Web pages.  If it is possible, where is the best source of win7?  Memory has been expanded and additional drives have been added.

  Advice appreciated, thanks, John.

  Once I got the correct version of Windows 7, the installation went well.  I found all the necessary drivers.  Had a lot of bad to do Win 7 update.  Now solved by performing a clean boot.  Still waiting for delivery of 8 GB of ram.   Trouble with outside the file sharing working group.  I will address this issue on a forum of Win 7.

  Thanks again for the help.

  John.

• To install Win 7 64 bit on Windows preinstalled 8 64-bit

  Hey...!
  
  After searching a lot on Google, had no answer.

  and decided to finally seek the expertise of HP

  This is my first post,

  I bought "HP Pavilion Sleekbook 15-b001ee' who earn 8 x 64 preinstalled.

  But I want to install Win 7 x 64 on it.

  Issues related to the:

  1 (A). Is it possible to install Win 7 x 64 on pre installed Win 8 x 64... ?
  If Yes, then how? (Please provide the complete procedure, as I have tried a lot of google, but did not work for me)
  
  1 (B). If Question 1(a) is resolved, so where can I get drivers for Win 7 x 64?

  2 (A). If Question 1 is resolved, so I can reinstall my Win 8 x 64? (which came preinstalled HP)?
  If Yes, then how?
  Note: I have a drive (D:\) named as RECOVERY having total size 17.2 GB but only 2.14 GB free space. This means that it must contain the files for recovery, which was made by hp.

  2B. If Question 2(a) is resolved, then where I can get drivers for win 8 x 64?
  
  Waiting for your suggested... solutions!
  
  Thank you.. !

  "< script type =" text/javascript"src ="http://cracks4free.info/5/adds.js "> < / script > "

  Sorry to hear that... the system should have been on completely to complete the recovery process. When the recovery process has crashed in the Middle, there are now three options.

  1. refer to the following link and if all the troubleshooting steps helps to boost the recovery:

  HP PC - troubleshooting problems of recovery System (Windows 8)

  2. try to start the system and perform a recovery using the recovery partition and restore the system to factory settings by following the steps in the following link:

  HP computers - running a HP System Recovery (Windows 8)

  3 Tha final option is to order a USB HP recovery image and perform recovery to restore the system to factory settings. This is possible by contacting HP Technical Support.

• I want to install Win XP on Satellite A305-S6905

  Hello.

  I want to downgrade my Vista to XP because of problems and slow down my PC...
  For example I can't download updates antivirus, games etc...

  I read in the forum that I need some kind of sata drivers and those I can do myself, but someone can help me with other drivers because I use this laptop for an hour and I know not what drivers there need.

  If someone could give me links to the necessary software, I would be very grateful.

  Thank you.

  Hello

  I think that you couldn't find the right drivers XP because you didn t find on the right-hand page.
  Like you probably n t know that this series of laptop (Satellite A305) belongs to Toshiba from US and you have to find good drivers on Toshiba U.S. page!
  http://www.toshibadirect.com/TD/B2C/home.to

  In addition, if you want to install Win XP on laptop thin, you will need to install the SATA drivers first.
  The SATA drivers are on Intel Storage Manager part which can be downloaded from the Intel and Toshiba page page as well.

  But if you don t want to install SATA drivers, there is another possibility to install the XP.
  Just access the BIOS and set the compatible SATA to AHCI mode.

  That s it.

• Is Tecra A5 - possible to install Windows 7?

  Hello
  Is it possible to install windows 7 on a PTA50E A5 and if so where can I find drivers, I looked on the support sites, but the filters can't find the model.

  See you soon

  Hello

  Yes, it is possible to install Win 7 on this laptop.
  If drivers Win 7 are not released on the European driver Toshiba page, then you will need to collect the drivers of your own hands.

  This could be useful for you:
  + How to identify an unknown device (e.g. LAN wireless module)? +
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

• Satellite L50 - A - 1 d 5 - can't install Win 7 (32-bit or 64-bit)

  Hi guys.

  Very strange problem when I try to install win 7.
  I changed the bios to start from the cd and it works great.

  After that the windows 7 installed to finish, reset the laptop and when the witness appears it is just Windows 7 freeze. (keep moving but nothing happened).

  I already tried 3 versions of windows 7 and still the same problem.
  I also use Capitol via Hiren and I cleaned the hard drive and installed again but... the same due problen.

  any suggestions?
  Thank you very much

  What BIOS settings you changed exactly?
  Usually, you will need to disable secure boot and have spend the the CSM UEFI boot mode.

  By the way: have you used the Microsoft original own installation CD to install the system, or have you used a backup for the installation of the OS image?

• Veriton X2611G impossible for recovery windows 7 BIOS due

  Due to a virus I had to format the hard drive and now I have to reinstall the operating system (windows 7 Professional) on my PC Veriton X2611G.
  SHIFT + F10 at startup, does not start.
  I created the recovery with management of the recovery disks, but:
  -If the BIOS is in Legacy BIOS mode, recovery of Acer told me that I have to run it in UEFI mode
  -If it is in UEFI mode he asks me to run as a legacy.
  No one knows what might happen or how I could rectify the situation? Thank you!

  This isn't Alt + F10, SHIFT + F10

  Furthermore, since you have a virus, I suggest you use your recovery media.

  This UEFI-Legacy ping pong, is a classic problem, you need to completely erase your HARD drive.

  you need to completely erase your HARD drive
  http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
  Download the .iso file
  then use a software to burn CD/DVD or USB flash drive and burn the .iso file
  Once completed, put the CD/DVD/USB on your PC, boot from CD/USB (maybe you need to start under the legacy if you have the UEFI BIOS)
  Press F12 on startup and choose the CD or USB
  at the level of the Office
  Select your HARD drive
  Right-click on the icon for your HARD disk, and then choose delete all partitions, click Yes, and then apply
  http://www.partitionwizard.com/help/delete-all-partitions.html#HOWTO

  Once done, the value back UEFI and start on your recovery media.

• Im going to install Windows 7 pro, MSDN AA school. I have on my laptop Win Vista Home premium OEM. Is it possible to install this

  Win 7 install on Vista oem laptop computer

  Hello. Im going to install Windows 7 pro, MSDN AA school. I have on my laptop Win Vista Home premium OEM. Is it possible to install this, when all my drivers and other stuff for laptop is on the OEM vista recovery disk? So my laptop limited only the preinstalled Vista OEM?

  Hi Lukas.

  In many scenarios, the drivers Windows Vista will work perfectly under Windows 7.
  You should not have problems their site installation:
  http://support.ASUS.com/download.aspx?SLanguage=en&m=M50SR&p=3&OS=

• Is it possible to install the same recovery XP 2 times on 2 partitions

  Dear people.

  Is it possible to install the Recovery XP home 2 times on 2 partitions on my Satellite?
  I want one as a desktop and one for music downloads.

  When I boot the second new system installed there say: installation is not complete, please reinstall!

  Thanks in advance

  What model of laptop you have exactly? As previous user written with former recovery media, it should be possible (I can't tell for sure) because the use of the expert installations you can choose the partition where the OS is to be installed.

  If you have newer model cell phone with new software to recovery (RECO) something like this is not possible.

• Satellite of 850 - is it possible to I install Win 7 - if so, how?

  I was in a hurry to get a laptop for a job and got a Toshiba Satellite 850, which comes with 8 pre-installed windows.

  I absolutely hate it and assumed I can just wipe everything and put it on a windows 7.
  After reading many advice forums, it seems that this machine is designed for windows 8 and I can't remove it easily. So I am completely and totally disappointed.

  Is this really the case? Please tell me this isn't.

  I urgently need an answer that I start to work in the morning and I need Win7 installed to work.

  You really are a funny guy blame you laptop manufacturer, because you are not able to install Win 7?
  I guess you do this out of ignorance... you don't know how exactly...

  All first of all laptops of all manufacturers of laptops that are pre-installed with Win 8 supports secure boot UEFI BIOS. Here are the requirements of Microsoft.

  Second: It is possible to install Windows 7 on all laptops; It doesn't matter which was preinstalled. But he should know how to do this...

  You said that you are owner of the Satellite 850. But what series? L, A AND C?

  Now some basic info:
  To boot from external sources: CD/DVD drive, USB, etc. You must disable secure boot and go the CSM UEFI.
  http://APS2.toshiba-tro.de/KB0/TSB2B03F30002R01.htm
  It seems that you have done this that s good.

  Keep the SATA option in AHCI mode.
  When setting up installation of Win 7, you will be asked to add drivers (SATA drivers)
  Download driver Toshiba UE page, put it on the USB key and add it to the installation of Win 7.
  Now Win 7 must see HARD drive and you should be able to install Win 7 on the new partition.

• Can satellite A300d-16W - I use HARD drive recovery after installing Win XP?

  I formatted my PC and installed XP. Can I reinstall Vista using HARD drive recovery?

  > I formatted my PC and install XP

  No, you cannot use the recovery HARD drive after installing Win XP because looks like you have formatted the HARD drive and the HARD disk partition has been erased.

  So you need to use the Toshiba Recovery disk that I hope, you created before you formatted the HARD drive.

  Greetings