Not recording camera images

Similar Questions

• LR5.5 can not record individual images in the display of the grid

  Here's the problem I have on LR5.5 on Mac 10.8.5:

  In the grid view, select a range of images and success "N" mode of inquiry. When I point out a single image, and then type 1 to 4 marks it assigns this qualification to each selected image in the survey. Even hit 'E' to spend in Loupe mode of inquiry is the same - all the images selected in the range are assigned to the nominal value, not just the image highlighted. It is a big change from previous versions of LR, making difficult the comparison images and special rates.

  Someone has experienced this problem and found a solution?

  Thank you very much.

  -Brett

  www.brettsimison.com

  Try it checking and unchecking to see if it is stuck.  It works very well on both systems, I tested.

• Cannot transfer images from digital Canon to Windows Vista. received message "save file not found" "Cameras Windows DC. default download folder is "my images".

  I have been transferring pictures from my Canon Digital via the Canon software in a Windows "My pictures" file for about 2 years with great success.  Today, an attempt to transfer was interrupted with the message 'Save folder not found' "Cameras Windows DC.  I noticed that was missing the file "my images".  I added one, I reinstalled the Canon software, I tried to download the image using the "Windows Photo Gallery", but got the same message as above.  What can I do to be able to download the photos again?

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two (he may have started before that you have noticed).  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If this does not work, please transfer your question in images and video Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where the people who specialize in issues related to the image will be more than happy to help you with your problem.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• D500 / View NX-I / Camera Raw can not open an image

  I just bought the D500 and transfer images to the card using Nikon View NX-I... But I'm unable to open the image using Photoshop despite having downloaded the last raw cameras for Mac version I could find... you will enjoy some advice from someone who has already been addressed and solved the same problem.

  Hi I am,.

  What version of Photoshop are you using?

  I just bought the D500 and transfer images of the map using Nikon View NX - I

  Do not convert the images, try to open them directly in Ps CC 2015

  D500 is supported in the latest camera raw 9.5 so, you should be able to openthem directly.

  

  Kind regards

  Assani

• RX100 ii how to take and keep 3 raw bracketed images and no not the camera to do hdr

  RX100 ii how to take and keep 3 raw bracketed images and no not the camera to do hdr.

  I want to have 3 separate raw images so that I can do HDR etc myself. How to configure this for example. + 1 0 - 1 EV exhibitions and be able to treat myself.  I want to be able to do this hand and align etc. later. I'd be satisfied with +.7 ev 0-. 7 if that's all he can do.

  Hi doshin! You can set the camera   (support: suite) by going into MENU 2 [Drive Mode]. In this mode, the camera allows you to shoot in 3 different exposures. You can also set the value of the show of support.

  If my post answered your question, please mark it as "accept as a Solution.

• Photoshop does not open Raw images with my new camera Canon 6 d help! I use Photoshop CS5 extended version.

  Hello

  I got a new camera and Photoshop and Lightroom will not open Raw images with my new camera Canon 6 d help! I use Photoshop CS5 extended version. and Lightroom 3

  Good and bad news:

  The bad news is you need CS6 or later version to open 6 d RAWs. (The 6 d did not support until Camera Raw 7.37.0 was created in CS6;) You can choose to upgrade (I recommend CS6 to jump and go straight to 2014 CC for $10 / month) * GOLD *...

  .. the good new is that the DNG Converter can help you convert your RAWs in DNG for CS5 and Lightroom 3.

• Bridge does not record the adjustments in camera raw when I press on the fact

  Bridge does not record the adjustments in camera raw when I press on the fact

  It was because I installed a new program. Uninstalled and it works fine now!

• Edited in Photoshop does not correctly display in Lightroom after recording the images

  Hello

  I recvently EU cloud Adobe and upgraded from Lightroom 3 or 4.  Since the upgrade I had problems with Lightroom not correctly display images edited in Photoshop.  Instead of the photoshop image, it creates a new jpeg image and appears in the library.  the PSD is not loaded into the library.

  I take a jpeg image of my library and shoosing the change based on Photoshop.  By selecting Edit a copy, I'm tried with the original and edit a copy with lightroom adjustments as well as with the same results.

  In Photoshop, I duplicate the base layer, the image upscaling, running some filters, addition of volunteering adjustment layers.

  I save the image in Photoshop format in the original folder where the original jpeg was in the Lightroom library.  I record with maximize compatibility on.

  When I return to Lightroom, the catalog displays the two files, the original jpeg and a copy identical to it, NOT the new file in photoshop with alterations.  If I go in the folder images occupy in the Finder using the Finder command show two images link to the same original jpeg format.  The modified file to photoshop is there in the folder but does not appear in Lightroom unless I drag and drop it.

  I've disabled all the filters and ensured that the sort is sort by name.  The image does not automatically appears in Lightroom after mounting.  Any suggestions?

  Thanks for any help!

  PS. I'm not looking for the subject, and there are discussions since 2007 and lightroom 2 but their solution was to start from scratch basically and I have a carefully labeled, starred and labeled catalog of more than 30 000 images and really don't want to do that

  Images that are edited in Photoshop will be displayed automatically in Lr only when the image file saved in Photoshop is identical to open LR.

  You say you open a jpg of Lr, then edit in PS-among other things-adding a few layers. Layers are not supported in JPG format, so you must either save it as a psd or a copy in jpg.

  In both cases, is not the same image as the one opened in Lr file, so it will have to be imported into Lr appears. If flatten you your image after editing in PS and then do a to your JPG - not a - it will be displayed in Lr.

  PS: the only exception is when you open a raw image from Lr into PS and you save it to PS in the format of file specified in Lr for external mounting. The saved file is automatically displayed in LR.

  Post edited by: web-Weaver; PS added

• camera images are not sent

  at the beginning

  I am able to send the camera image by clicking 'share' and choose the gmail account that I myself used

  (so I sent the photo taken by the droid to myself)

  I don't know why? (I did not have any configuration or sophisticated question I remembered)

  Since 2 February

  all my photos 'sharing' are not received by my gmail account

  I clicked on the GMAIL icon on my droid, discovered these emails 'sending '.

  and not really sent on

  Could someone help me? (I tried calling Verizon but surprisingly less-than-results-oriented, in the store or the 1-800 number)

  Now I can't send photos (share my photos)

  I don't know why they are stuck in the Outbox.  A solution I've seen is this to erase all your emails in your Inbox.  For some reason any it helped others.  The other thing you could try is to text to your email address.  Instead of putting a phone number the on any field type in the e-mail address you want to send it to.  It has always worked like a charm for me.  I hope this helps.

• retrieve and record continuous images in labview

  Hello

  I use the NI 1744 smart camera to capture and record continuous images of a moving object. My smart camera is detected in MAX and made the seizure of an image. But when I use the attached file of VI in labview, the smart camera is not detected, only the webcam is detected and a video can be generated using the webcam. Please help me detect the NI 1744 smart camera. I will be grateful.

  Hello

  Your smartcam is not directly accessible from your PC because it is a remote device.

  Create a project in real time to access your camera.

  Have a look here: http://forums.ni.com/t5/Machine-Vision/Error-1074397145/m-p/535230/page/2?view=by_date_ascending

  Concerning

• WebWorks BB10 not read file image of phone storage

  Hello. I'm trying to get a file from storage after taking a picture, resize, and then converted to base 64. I have most of it down, but I'm stuck on an error...  On the device, it records an empty string on the Simulator, it works well... Here is my code...

  function startCameraApp() {}
  PhotoTaken = false;
  blackberry.event.addEventListener ("onChildCardClosed", sharePhoto);

  BlackBerry.Invoke.Invoke ({}
  target: 'sys.camera.card '.
  (}, onInvokeSuccess, onInvokeError);
  }

  function sharePhoto (request) {}

  Console.log ('Hoezit');

  image of var = new Image();
  image.src="file://" + request.data;
  image. OnLoad = function () {}
  resized var = resizeMe (image); Send it to the Web
  imagedata var = resized.split ("base64"),
  sessionStorage.setItem ("MyPhoto", imagedata);
  }
  }

  function resizeMe (img) {}

  var canvas = document.createElement ('canvas');
  var max_width = 600; a 275
  var max_height = 600; a 275
  var width = img.width;
  var height = img.height;

  calculate the width and height, constrain proportions

  If (width > height) {}
  If (width > max_width) {}
  height = Math.round (height * width/max_width);
  width = max_width;
  }
  } else {}
  If (height > max_height) {}
  width = Math.round (width * height/max_height);
  height = max_height;
  }
  }

  resize the drawing area and draw the image inside data
  IMG. Width = width;
  IMG. Height = height;
  Canvas.Width = width;
  Canvas.Height = height;
  Canvas.ClassName += "ui-hide"
  CTX var = canvas.getContext ("2d");
  ctx.drawImage (img, 0, 0, width, height);
  Return canvas.toDataURL ();
  }

  The resize code should work fine. As says. The camera takes my picture and it works cool and everything, but on my device, it simply records an empty string. I should also mention that the path back to the sharephoto function is...

  /Accounts/1000/shared/camera/ImageName.jpg

  I'm so stuck and I really need help. I don't know why it works on the Simulator and not my camera.

  Oh and also. I have in my config file...

  
  
  

  <>ermissions >
  <>Ermit > read_geolocationermit >
  <>Ermit > read_device_identifying_informationermit >
  <>Ermit > access_sharedermit >
  <>Ermit > access_pimdomain_contactsermit >
  <>Ermit > use_cameraermit >
  ermissions >

  
  
  
  

  Thanks in advance

  I found my problem... You must add the correct authorization...

• iPhone'S will not record voice memos

  Hello! My new iPhone IS will not record voice memos. I can open the app very well, but when I press the record button it shakes just for a moment and then stops.

  The software is up-to-date (iOS 9.3.1), storage seems adequate (6.0 GB used, 5.6 GB available), MIC works fine in other applications (voice control, camera), so I'm not sure what the issue could be.

  Thank you!

  Try a forced reboot - after open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

  Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

  If this does not work

  Please take a genius appointment at an Apple Store, or select another authorized service provider.

• My Sony Handycam DCR-TRV950 flashes a yellow icon, C:31:23 and will not record or play.

  A year ago, the camera suddenly started flashing and beeps a yellow icon in the middle of the screen. C:31:23 flashes in the upper right corner above the minutes from the end. The camcorder will not record or play.

  If I remove and reseat or change the battery, and if I remove and reinsert or pass the minidisk, sometimes it'll save or play for a while before the beeps happen again.

  Sunny in Sun Valley

  Try to check the pin of pinch. Open the container of band and you can see the PIN pinch, is a small black roll about 1/4 in. wide and about 1 inch in height, see if she's down on the stem

• GigE camera - image grab bars

  Hello world

  I use or acquisition of vision to capture images of a GigE camera.

  I get images just as I trigger the camera - rates so so good.

  All other photos shows a few black bars.

  Anyone have any idea what it could be?

  It is not the hardware, the camera works perfectly with the shape of the manufacturer's software development kit.

  Thanks for any help

  Looks like an incomplete picture, this could be caused by the missing packets.  To prevent missing packets when the acquisition, you can do two main things: the size of the packets configured on the camera may not exceed what the network card can manage and ensure that the bandwidth of the output of the camera image data do not saturate interface band bandwidth.  I would reduce the packet size of camera for 1500 initially to determine if the size of the package is the cause of the problem.  You can throttle how much data that the camera can send by manipulating the interpacket delay, some manufacturers have a very handy feature called StreamBytesPerSecond.  According to what mechanism, you can use, increase interpacket delay or reduce StreamBytesPerSecond.

• Does not display an image

  I use the vision software, Labview 2011 windows XP with a USB wbcam. I use the WebCam to test the software, create an installation file and run it on a different machine. This machine has an IEEE 1394 Basler camera.

  The program seems to work smoothly with the delivery system. Never on the USB system, the image displays correctly if I have a property node to read information from the camera. If I delete it, it works just like the IEEE 1394 camera.

  The clos VI seems to illustrate the problem. If you run this, it does not display the image. If you stop the program and the node property set to false, it displays the image correctly.

  To view all the attributes supported by the camera, use IMAQdx enumerate attributes. If you do this, you will notice that frame interval is not one of them. Remove your property node frame interval to get rid of the error.

  If you want to determine the SPF of the current video mode, you can do it manually in your loop (by counting images per second). To translate the video mode, use the property node (as you do now), and then use IMAQdx listing video Modes for a list of all possible video modes (and then using the output of the node property to index this list).

  Not all cameras are supported on all properties in the nodes property! Sorry!