not refreshing page

Similar Questions

• Browser does not refresh page after validation!

  Hello all, I use JDeveloper 11.1.2.3.0

  I have a big problem here. I create a simple page and insert a form, a createInsert button and a button of validation , for example. I run this page and all is well. I create a new record, fill in the form, and then validate. Right now if I press F5 to reload the page, the browser asks me confirmation "to view this page, Firefox must send information that will repeat any action (for example, a search or order confirmation) that was carried out earlier." I do not understand why he should repeat any action, I checked for Sales transactions after the validation operation and transactions are clean. If I leave this page to another and back to the first it works fine, F5 refreshes without problem.

  If I have a table with multiple lines and that I have updated first line for example and then click on the third line and then perform a refresh (Confirm on above message), the third row will get the all the information of the first line...

  Does anyone know how to fix this?

  OK I found the real problem and the solution to it. As I said the reopening of the page brings no problem, but only to hit F5 don't. My buttons 'submit' and 'committed' a 'partialSubmit = false' who must perform a total of pages submitted in this case. Apparently this is not "detected" by the browser when you press F5, although the presentation is made. Change "partialSubmit = true' the buttons did the trick." Tung

• not refreshed page elements

  Hello
  Search page:
  
  I used the search for records. After clicking on edit on the grid on the first page, I got the other details page.
  on the details page: I used LOV to for an item. When I changed the value of the element using LOV and click on apply changes (button). He recorded the new item.
  
  Its working fine. But the problem is if I come back and you click another folder and in the detail of the page it shows the new item that I saved for the previous record (possibly the cache). But in the actual table, the value is very good. I have disconnected and connection it seems ok.
  
  Please notify.
  
  Concerning
  HSAC

  HSAC,

  It seems to me that it takes the value of the session state.

  In your detail page, edit your article, now the 'Source' section, set "Source used" to "always replace the value that exists in the session state.

  I hope this will fix the problem

  See you soon,.
  Hari

• New tab page is not refreshed when I delete a site

  I have two problems with the new tab page:

  1. The new tab page will not refresh when I delete a site. I can click on the [X] button to delete a site, but nothing seems to happen. The site remains on the new tab page until I have refresh or reload the page.
  2. Firefox restores all the sites that I delete the new tab page, the next time that I restart Firefox.

  Found the problem:

  DOM. Storage.Enabled apparently affects the new tab behavior (bozhe me!)

  I had mine set to false; Apparently, it breaks the new tab page. Changing to true restored expected behavior.

  Would be nice if the entries in About: Config to http://kb.mozillazine.org/ included a description interconnected how change these options will affect/guy features in Firefox. (And while I'm wishing I join $ 1 million, a pony, and peace in the world). Is life...

  Thanks for your help crazyskeggy and Tylerdowner

• iPhone that does not refresh Plus 6

  My iPhone will not refresh Plus 6. I have tried since the new update came out. It gives me just this message: can anyone help?

  Try using iTunes to update.  Update the software on your iPhone, iPad or iPod touch - Apple Support iOS The iTunes method is second on the page.

  See you soon,.

  Adam

• Safari does not load pages after sleep in the active window

  Please note: I'm French, so what you read is not perfect. Thank you.

  Hi everyone, it has been so long that I tried to solve my problem on Safari.

  Let me explain what happens: when I wake my Mac, some site not loading, including Youtube, Facebook and Google until I

  -Close the Safari window and open a new

  -Wait at least a minute or two

  -Spam the shortcut for refresh up to what a "page not found" error.

  I tried all explained in this or other forums and do these things:

  -Reinstall the operating system (but keeping my data)

  -Restore with a Time Capsule

  -Open the terminal and type these commands:

  -Fixed permissions and owner

  sudo find ~ $TMPDIR... - exec chflags h nouchg, nouappnd, noschg, nosappnd {} - exec chown () $UID h - exec chmod + rw {} + - exec chmod () n h ++ - type d - exec chmod h + x {} + 2 > & -.

  -Reset Safari

  MV ~/Library/Safari ~/Desktop/Safari-'date + %Y %hour %m %d ' %s; RM - Rf ~/Library/Caches/Apple\-\ Safari\---------Safari\ Extensions\ Gallery; RM - Rf ~/Library/Caches/Metadata/Safari; RM - Rf ~ / Library/Caches/com.apple.Safari; RM - Rf ~ / Library/Caches/com.apple.WebKit.PluginProcess; RM - Rf ~ / Library/Cookies/Cookies.binarycookies; RM - Rf ~/Library/Preferences/Apple\-\ Safari\---------Safari\ Extensions\ Gallery; RM - Rf ~ / Library/Preferences/com.apple.Safari.LSSharedFileList.plist; RM - Rf ~ / Library/Preferences/com.apple.Safari.RSS.plist; RM - Rf ~ / Library/Preferences/com.apple.Safari.plist; RM - Rf ~ / Library/Preferences/com.apple.WebFoundation.plist; RM - Rf ~ / Library/Preferences/com.apple.WebKit.PluginHost.plist; RM - Rf ~ / Library/Preferences/com.apple.WebKit.PluginProcess.plist; RM - Rf ~/Library/PubSub/Database; RM - Rf ~/Library/Saved\ Application\ State/com.apple.Safari.savedState

  -Fix permissions with the inbuilt system tool

  sudo/usr/libexec/repair_packages - repair - standard-pkgs - volume.

  -Log in as a guest

  -Start in safe mode

  -Switch to recovery mode and put something else in the window "resetpassword.

  -Remove all apple leaves me with the GUI (cookies, cache, etc.)

  -Mess with network settings, but it's obviously very well because other programs have no problem for example. Chrome, Firefox, Mail, Push notifications...

  -Uninstall all extensions safari

  -Unplug my micro sd card and reboot (which is constantly plugged into my mac)

  I am so angry with my computer because I paid 1.5 k for a computer that is not able to make the task easier for a modern computer. Even a €50 computer has embedded software that can handle a resume from sleep without having to restart the entire software... Imagine if you had to do it on your iPhone, you will eventually get a refund within a week or less because it is not normal in 2015 to have this kind of problem. I hope that I have no problem with safari on my 6s and I don't plan to spend my browser because Safari is part of the Apple ecosystem and have the perfect sync and battery management.

  So I need to get this fixed a problem and I really need your help because a lot of people had this problem on the internet, but NEVER seen someone who explained how it happened is the correction of a problem. My Mac running the latest version of the software which is 11.2 starting today.

  Here is a video of the problem:

  https://www.YouTube.com/watch?v=AjfAlkKEVsc

  And some examples of the threads on the internet, I found the same problem:

  Safari does not work after the mode 'sleep'. Apple support communities

  Safari doesn´t supported pages after waking up

  Safari does not load page after waking up

  Facebook doesn't "work" after the awakening from the sleep - MacNN Forums

  Corruption Safari       See post by Linc Davis

• Windows Mail is not refreshing since 09/02/2012. When I try to update using the F5 key, I get the error messages.

  Windows Mail is not refreshing since 09/02/2012.  When I try to update using the F5 key, I get the error messages.  The only way I can see me new emails is to sign on the web page of my Internet service provider, which I don't like.

  original title: windows mail is NOT refreshing

  It would be useful that Microsoft has put a notice to have several products access our email accounts so that us non-technical people could avoid these problems.

  Maybe it's something that Apple should warn the consumer. I have three e-mail accounts and I receive and send all the accounts on three different computers at the same time and have never had this problem. Your case is the first.

• DataSource is not refresh a runtime

  Hello

  When I load a page for the first time, it loads all the perfect data. But the data source is not refresh the data when executing, how to refresh listview when I load a page, then by restarting each time the application of others.

  I used the code below, but does not during execution.

    onCreationCompleted: {
          dataSource.load();
  }
  

  you decide when it is refreshed... onCreationCompleted is called only when the page is created, which can be the case every time (for example where the Prosecutor tabbedpanne).

  so, as a method of inrush current in the case of signals:

  onTriggered

  onTopChanged

  onClick

• ADF refresh page with page fragments jsff jsf after the set session variable

  Hello.

  I have a model that includes a button that allows you to select a profile, you push the button appear available profiles, choose one and press to accept. After that, I put a variable session successfully.

  I have a page of 'First' of jsf with two fragments of page jsff after seeing a link. The display link is composed by a headerView and detailView. The headerView had a variable binding. What I need, is that this parameter (bindVariableParameter) can be defined by the session of the model variable.

  That's what I get:

  I am in a homepage (separate Application Module), model button is pushed until I load "first" jsf page and after that, I go to the page jsf 'First', that information is loaded successfully. What I do in the Application Module is something like this:

  protected void prepareSession (one session) {}

  SessionScope card = ADFContext.getCurrent () .getSessionScope ();

  Company string = (String) sessionScope.get ("compId");

  System.out.println ("Default Comapny in British Colombia is:" + company);

  super.prepareSession (session);

  this.getSession () .getUserData () .put ("The company", company);

  System.out.println ("after the definition userData value card BC");

  }

  And in the variable binding expression of the headerView that I use:

  adf.userSession.userData.Company

  It works very well! But!

  When I press the button again and I chose another profile, the info is not updated. In the headerView or in the detailView.

  Also, when I go to the 'First' jsf page (without previously pressing the button model), I had no info, which is just, because I have no session variable. After I have press the model and select the profile, but the page is not refreshed.

  I tried many ways to this, but I'm lost.

  Could you help me?

  Kind regards.

  I'm not sure that understand your use case. What do I get, you set a parameter after that you press a button on the home page to pass this parameter to the first.jsf.

  Why don't you implement a method of the application module and call it directly with the parameter. The session of preparation will not be called whenever you browse but only init am.

  Do you need the parameter in the layer model or only in the display?

  Timo

• Windows (composition and effects and presets) not refreshing

  Not much luck Googling for this response. I'm not a solid technology, but I am a heavy user of ae, so it's urgent for me. The windows/tabs are not refreshing. First example is in the editing/composition windows. If I scrub through the timeline with my mouse the updated publication. When I image by image (page up/page down) the composition does not update. Second example is when I search an effect in the tab "effects and presets. Search results remain empty no matter what I put in the textfield. I discovered a workaround is if I go into the control panel and switch between alphabetical (categories, folders finder,) display settings.

  I have reset the ae preferences and keep away the Adaptive resolution. I know that the cuda/video card is a problem, but it wasn't cause a problem in a version earlier than Adobe ae cc I had a month or two ago, before the update. Please let me know how I can solve this problem.

  

  Hmmmm... If that has happened since a year, it seems that something is really wrong with your AE.

  I suggest that contact you Adobe support.

  If you do not have to do a clean installation, make sure that you have a backup of all your stuff from Adobe, uninstall and run the CC cleaning tool before reinstalling.

• Classic report SQL with BLOB column not refreshing with jQuery Trigger Apexrefresh call

  Hello

  Really hoping that someone can help me, but for some reason that I try to report updated in dynamic Action to help:

  jQuery('#my-report').trigger('apexrefresh');

  on a simple SQL query report classic. I have used this many times on other parts of the report but the only difference with the report region where it is not refreshing, is that the table contains a BLOB column as it is essentially a report of downloaded files that users have made to the page by using the file browse.

  Would really appreciate help with that basically, I don't want to perform a full page refresh, because it currently operates.

  It has to do with the fact that this report is the question about a BLOB column, which is a link to the uploaded file?

  Thank you.

  Tony.

  Hello

  Check this area of report model have id.
  You should have id = "" #REGION_STATIC_ID # "in the model of the region"

  Make sure you have correctly write the id of the report in JavaScript. JavaScript is case-sensitive

  Kind regards
  Jari

• Classic report region is not refreshing using the DA

  Apex 4.2.2 on Oracle 11.2 use EPG in Linux

  I have a Camembert and I want user to click on a section and refresh a report classic region under the graph on the same page.  I've used various methods to try to get this working, but none succeeded.  Here's what I have right now - when a pie is clicked, a value is returned to a text P19_STATUS field in the region of report using javascript in a DA:

  AnyChart.getChartById ($("#chart2_chart_object").attr ("id"))

  .addEventListener ("pointClick", Function {}

  $s ("P19_STATUS", e.data.Name);

  });

  It works fine as I can see the value that corresponds to the label in the chart.  I created a second DA with an event of amendment to article P19_STATUS. There is a REAL action - Refresh.  Selection type:, Region: classic report (40).  I put also enable partial Page Refresh Yes on the classic report and the elements on the Page to be sent to: P19_STATUS.  When the user clicks on the cake the value is in P19_STATUS, but the report is not updated.  FYI, I also tried $('#report_region_id') .trigger ("apexrefresh");  in the second DA but which doesn't work anymore.  I want only the region refresh, not the page.  Please help - I'm fairly new to Apex, so please be as detailed as possible.  Thank you!

  Nicolette wrote:

  User12037683

  The missing part was that the report is a subregion of the chart area.

  Under regions have their own model of the region. Instead the use of models from the parent area area unit.

  Models of the region can be specified for the sub regions as all other regions. In this case it seems to be a problem with the sub-region model as it appears in the list of model as 48560037058667637086selection.

• Picture of detail not refreshing after main table query

  JDev 11.1.2.4

  I have an af:query for a criterion to display against the main table based on a date field.  The main table is updated as expected when you edit the query.  It's that the secondary table linked to not refresh when the query changes.  Retail refreshes correctly when a line is changed on the main table.  The secondary table has the ppr set to the main table.  I tried to include the query in the ppr, but it does not work.  I tried to change the ContentDelivery on both with no luck.  I looked on the forum and blogs, and I'm not finding a resolution.  I expected the ppr to take care of this because data is changing in the main table.  Any ideas what I'm missing?

  Thank you

  Rudy

  Works for me using 11.1.1.7.0 with this code in the page:

  model = ' #{bindings. " ImplicitViewCriteriaQuery.queryModel}"queryListener =" #{bindings. " ImplicitViewCriteriaQuery.processQuery}.

  queryOperationListener = ' #{bindings. " "ImplicitViewCriteriaQuery.processQueryOperation}" resultComponentId =": resId1" / >

  emptyText = "#{bindings." DepartmentsView.viewable? "{'No data to display.': 'Access Denied.'}".

  fetchSize = "#{bindings." DepartmentsView.rangeSize}' rowBandingInterval = '0 '.

  selectedRowKeys = ' #{bindings. " DepartmentsView.collectionModel.selectedRow}.

  selectionListener = "#{bindings." RowSelection DepartmentsView.collectionModel.makeCurrent}"="single"id ="resId1">

  headerText = "#{bindings." DepartmentsView.hints.DepartmentId.label}"id ="resId1c1">

  headerText = "#{bindings." DepartmentsView.hints.DepartmentName.label}"id ="resId1c2">

  headerText = "#{bindings." DepartmentsView.hints.ManagerId.label}"id ="resId1c3">

  headerText = "#{bindings." DepartmentsView.hints.LocationId.label}"id ="resId1c4">

  emptyText = "#{bindings." EmployeesOfDepartmentView.viewable? "{'No data to display.': 'Access Denied.'}".

  fetchSize = "#{bindings." EmployeesOfDepartmentView.rangeSize}' rowBandingInterval = '0 '.

  selectedRowKeys = ' #{bindings. " EmployeesOfDepartmentView.collectionModel.selectedRow}.

  selectionListener = "#{bindings." RowSelection EmployeesOfDepartmentView.collectionModel.makeCurrent}"="single"id ="t1 ".

  "partialTriggers =": resId1: qryId1 ">

  headerText = "#{bindings." EmployeesOfDepartmentView.hints.EmployeeId.label}"id = 'c4' >

  headerText = "#{bindings." EmployeesOfDepartmentView.hints.FirstName.label}"id ="c1">

  headerText = "#{bindings." EmployeesOfDepartmentView.hints.LastName.label}"id ="c5">

  headerText = "#{bindings." EmployeesOfDepartmentView.hints.Email.label}"id = 'c3' >

  headerText = "#{bindings." EmployeesOfDepartmentView.hints.PhoneNumber.label}"id ="c2">

  Check partial triggers used in your code...

  Timo

• Not refreshing spin to carousel DataBound

  Hi all

  I have a VO dragged & dropped like a carousel on my page.

  Here's the code,

  < af:carousel currentItemKey = ' #{bindings. " PDFImages1.treeModel.rootCurrencyRowKey}.

  displayItems = "oneByOne' controlArea = 'small '.

  value = "#{bindings." Var PDFImages1.treeModel}"="item.

  ID = "c5" >

  < f: facet name = "nodeStamp" >

  < af:carouselItem id = "ci1".

  Text = "Label ID: #{point." LabelId} v #{point. {VersionNo.0 "}

  styleClass = "AFStretchWidth">

  < af:panelStretchLayout id = "psl8" startWidth = "10px".

  endWidth = '10px' topHeight = '10px '.

  bottomHeight = "10px" >

  < f: facet = 'bottom' name / >

  < f: facet name = "center" >

  < af:outputText value = "#{point.» LabelId}@#{item. VersionNo}.

  ID = "ot10" / >

  < / f: facet >

  < f: facet = 'Start' name / >

  < f: facet = 'end' name / >

  < f: facet = 'top' name / >

  < / af:panelStretchLayout >

  < / af:carouselItem >

  < / f: facet >

  < / af:carousel >

  Here the output text is refreshing correctly but af:carouselItem text property is not refreshing when I click on the spinner. What is the reason for this? Even though I put?

  Kindly help.

  Kind regards

  Deepti

  My problem has been solved...

  Solution had nothing to do with the carousel. Problem was actually with VO.

  My VO which selects columns 1 and 2, returned values as below

  Column1 Column2

  ABC                 1

  ABC                 2

  ABC                 3

  But I chose only the key attribute of 1 (primary key) column that was causing the problem with the carousel.

  When I chose the two columns as key attribute, it worked... !!!

  Thank you all.

• My itunes on windows 10 does not refresh to allow me to use my new iphone 7

  My iTunes on windows 10 does not refresh to allow me to use my new iPhone 7, I have loaded down the update several times but he gets halfway through the installation of the update then say there is a problem and UN-installs

  Follow the instructions by If you can't install or update iTunes for Windows - Apple Support