Not the power of the mobile robot platform

Hello

I just got the Robotics Starter Kit for education and have problems at the robot to work. I plugged the power and turned all the dipswitches in the off position but the power led is still off and the hardware configuration can not detect. The power brick has confirmed that he was in charge and after leave plugged in, the battery is fully charged, so it is not because as its low power. There are wires that can broke or I have to send it back for repairs?

Thank you

oswong,

Just to confirm, plug you the dough to the supply cable of the robot after charging?  If the battery is charged and connected, the power led should light up when the "MASTER" switch is turned on.  If the Council is not be powered, then it could be a bad connection or a power converter is damaged.  A power converter is damaged, you can check by listening to a small quiet click.  Let me know if it helps.

Chris M

Tags: NI Software

Similar Questions

  • BlackBerry locked Z10 Z10 not the mobile phone service provider

    My wife and I have a Z30.  When she moved from its old Z10, which became the youth listen to.  They use applications, games and a wi - fi only.  It is not connected to a wireless network now carier.  Children changed his password, and we do not know what it is.  They tried 5 times already, and after 10 unsuccessful attempts, the data are deleted.  How to reset the password for this phone that is not connected to a network now?

    First of all, do not have the camera on a support for wireless mobile is not the issue.  This fact is not relevant.

    Secondly, the big question is which version of the OS is on the device and if BlackBerry Protect is enabled.  If the device is running a later version of the operating system with the function of protection against theft and if protection is enabled, then the problem is complicated.  And if this is the case, then you must know the password or the device will become useless.*

    So, the best cases, anti-theft say are not a factor.  If the device is inviting the user to enter blackberry, then do it and thereafter, you will be able to try again the password.  If you do not know the password and you enter it incorrectly 10 times, the device will wipe away.  And after this - yet once, assuming that the protection against theft is not present or not lit - so you can set up the device again.

    * If the lock is present and active, your only solution is to contact the dealer and see what they can do for you.  Expect to have to provide proof of purchase and identification, i.e. If they salesman can or will help.

  • Site is not redirected to the mobile version when you access through phone

    I made a mobile version of my site www.derboden.com and uploaded on the ftp to my host. When I go there it always shows the desktop version not the mobile version. Help, please.

    The folder structure exported by Muse must be maintained. In general, this means using an FTP client or the built-in file? Upload to FTP host... Muse feature to copy all of the files and folders on your server.

  • I have an iPhone 5 that answering an appeal not heard anything. The problem is solved by rebooting the mobile phone. What is going on?

    I have an iPhone 5 that answering an appeal not heard anything. The problem is solved by rebooting the mobile phone. What is going on?

    Try a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Ignore the "Slide to power off" text if it rises. You won't lose anything.

  • BlackBerry smartphones can not connect to the Mobile network

    Hi there, I really hope that someone can help me with this frustrating problem. I have a Verizon Blackberry Curve 8530 I bought on eBay. I have not had any problems to get the phone activated and it worked like a champ. A few days earlier, the battery got very low and my connections disabled. I charged the phone and now it won't let me connect to the mobile network! When I select the option it tries to connect and a red 'X' appears and it does not connect. However, it WILL connect to WiFi. WTF.

    Hello!

    I suggest the following:

    (1) dial * 228 and select Option 1. To make again, and select Option 2.

    (2) registry HRT

    • Homescreen > Options > Advanced Options > host Routing Table > (it matter little what line is current) > sign up now

    (3) Service reference books

    • KB02830 Send the directories for the BlackBerry Internet Service

    (4) batt Pull Reboot

    • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

    I hope that will move things again for you! If this isn't the case, then you must contact VZW for assistance.

  • Install the MDW and the mobile client on the same platform

    Hi all

    We implement our 11g Oracle Database Server from Mobile environment and I was confused about something I read in the Release Notes (http://docs.oracle.com/cd/E22663_01/doc.11100/e22675.pdf).  In section 3.2 says 'do not install MDW and the mobile client on the same platform.'  Did mean really say 'platform' or does really do not install the MDW and the mobile client on the same device?  We are a store of Windows 100% - the mobile server is installed on a Windows Server machine, we plan to develop with Workbench Mobile database (GMD) on a Windows 7 desktop PC, and we intend to run the client mobile Windows 7 tablets. The Release Notes say that I can't do this?

    Yes - the way it is written is a bit confusing.    We will correct it in the next version of doc.    What we were trying to say, is do not install them on the same system.    Thank you for this comment.

    Kind regards

    Mike

  • browser will not find version compressed; continues to go to the mobile version!

    Can anyone help. I have a site hosted on BC and the desktop version is HTML/CSS created in Dreamweaver. I created a Mobile (phone) and a version of the tablet in Muse. I have download on BC and they worked very well. Then the version Tablet began to go to the Mobile version after a problem with a form on each. How can I get them both to direct to their appropriate sites? Mobile version seems to work very well. Another thing, on the platform of the BC there is an option to lead the audience in a mobile folder and a compressed folder (where Muse sites are download), but it keeps being turned off.

    Please provide details as to when exactly the compressed version redirects to mobile, after sending the form? in this case, please see the page that is located in the redirect after submission in form options.

    For the folder to the main site option, you do not have to worry because it is only necessary if you create a different version of end of BC and wants to redirect to specific folders. For Muse, created sites you don't have to check that.

    Thank you

    Sanjit

  • Is a version ARMv6 of the newest version of Firefox 4 Mobile (not the night compilation of Fennec) already developing or planning?

    I own a HTC Wildfire, and I think that it's really a shame that Firefox 4 Mobile is not for phones with a processor ARMv6 out yet, only for ARMv7 processors. I'd like to try the new version of the mobile version of Firefox, because I see a lot of improvements since the Fennec.

    So I was wondering if Mozilla is already developing Firefox 4 for ARMv6 phones. This is a large number of phones, so I don't think that they should be ignored.

    Thanks in advance,

    Thomas

    If view you it ' nightly later /-"page, it seems like I have a hyperlink is used the latest version, regardless of the name of Fennec .

    http://FTP.Mozilla.org/pub/mozilla.org/Mobile/nightly/latest-Mozilla-Central-Android-R7-nothumb/

    Construction on this page was generated today.

  • Satellite M50 does not supply power to the top

    Hello

    My laptop Satellite M50 does not supply power to the top. The laptop itself is working fine, but I can't use it as the battery is discharged. I checked the cable ca and it seems ok. The laptop has a fuse internal which I need to check? If this is not the case, what should I do?

    Thank you.

    Hello

    If I understand you correctly you cannot use laptop with AC power only. Am I right about that?
    Switching between the block of AC power or the battery, do the power of electronic cards and there is not a switch so that you can check.

    When you connect your laptop to the power Jack is the power LED ON?

  • my wifi doesn't connect not - says disconnected by the mobility center - but no tile reconnection

    Compaq presario cq57 windows 7

    Wi - fi connection, error message stop said was disconnected by the mobility Center, but there is no tile

    to reconnect as it is on my other laptop. drivers update I tried, but they said ok to update and functional

    grateful for any input

    Thanks for the reply kathles.

    If the wi - fi button is blue, which means that it is enabled, it can be excluded that the issue.  I do not see a physical switch on this laptop be so that is also excluded.

    Then I would like you try to remove the device from Device Manager driver.  Then restart the laptop without having to reinstall and see if Windows detects new hardware and invites you to reinstall the driver.  Doing it this way should erase all settings disable the device and force it to reset itself.

    Let me know what the result please!

  • Satellite Pro 440 CDT does not supply power to the top

    Hi, I have an old 440 CDT which does not supply power to the top. Someone at - it ideas?
    AC is connected, the power led is lit, green. Battery is dead (as in buried). When I press the power button, the following occurs:
    -The led is green
    -Num lock (the one with the 'A' on this subject) flashes 3 times: long-short-short
    -HARD drive flashes 1 time, green
    -CD light flashes 1 time, orange
    -Popping sound in the speakers
    Then it turns off again, with the power light green constantly led.

    Nothing happens on the screen (I tried FN + F5). I'm also past CD/diskette, attached, with or without battery, without help.
    I am confused, please help!

    THX, Eric

    Hello Eric

    As you know, on this way it is not possible to give an accurate diagnosis, just speculate what may be the problem. In my opinion it is certainly because of faulty electronics on board, but what, exactly, it is not easy to say. Try to contact someone who has experience with laptop repair procedure.

  • Satellite Pro A60 does not supply power to the top

    Hello

    I have a Satellite Pro A60 and when I turn on the machine, the lights come on and the fan whirls for about 5 seconds and then the machine just turns off again.

    No matter if I have the battery or HARD drive in or not, the same phenomenon occurs.
    I guess it's problem of CPU or power supply Board, but I don't know.
    Is there anyone else who has had this problem and if so how is it resolved?

    Any help would be appreciated very with gratitude that I am out of warranty and need the laptop when you work from home.

    Thank you

    Hello

    I guess it can be a single processor or card mother related issue.
    If there is something wrong with the power supply for laptop card then the cell phone would not turn on, even for 5 sec.

    But it's only my personal suggestion to make sure what's exactly wrong check specifications should be necessary.

    So I think that a laptop computer technician should check it out.

    Good bye

  • How I picked my email address when I don't have an alternative email to reset it and the mobile operator that I use is not there at all. Thank you

    How I picked my email address when I don't have an alternative email address to reset and also the mobile operator I'm using is not listed it at all.

    Hotmail gives me a few options, but non of them is useful to me...

    The problem is probably my junk e-mail generated from my e-mail address or something else, I don't know about you!

    Thank you

    Hi Beqiri2012,

    Just to clarify, please repost your question on the Hotmail Forums below to help with your Hotmail account number:

    http://windowslivehelp.com/forums.aspx?ForumID=d3fda415-1e53-4007-8e0c-2a77180ffb1d

    Thank you!

  • Acer travelmate 5760 does not supply power to the top

    Nice day

    the laptop is a little older than a year and feeds not high at all. It began a few weeks ago.

    At first the light flashing orange a few times when the laptop is on, but nothing else happened.

    Then he might start just up and everything by initializing the battery light would blink and he would be off.

    I tried to remove the battery etc to carry out the motherboard as advised, but no difference.

    I tried some other shells, the same result.

    I have now left it unplugged for a few days and it is not even the orange light more.

    I contacted Acer two weeks ago and received a message that a response would happen within 24 hours, but to date I have received no response at all.

    Any advice on something else I can try before I send it?

    Thank you

    Lucia

    It is recommended to check if the laptop is removing the battery and connect the laptop directly on the AC adapter.

    If it is consumed, then there is a problem with your battery. In this case, try to use another battery if possible and see if that solves the problem.

    If the laptop powers not the same after plugging it directly into the adapter, there might be a hardware problem. In this case, it is recommended to contact Acer support by using the following link:
    http://us.Acer.com/AC/en/us/content/service-contact

    The following link might be useful:
    http://Acer.custhelp.com/app/answers/detail/A_ID/4/~/What-can-i-do-if-my-computer-does-not-power-on%...

    Hope this will help you.

  • the pure networks platform service is not running

    I can't use my wireless card no matter what and this message

    You (or did you) a version of Network Magic installed?  Generally, the complete message would be:

    The Pure Networks Platform Service is not running
    Pure Networks Platform Service must run in order for Network Magic to function. If you have manually stopped or disabled the Pure Network Platform service, restart now.
    [2 links]

    See this FAQ: http://www.purenetworks.com/support/faq/195.html (the site can be slow to load)

    The Microsoft Windows Installer Cleanup utility is no longer available from Microsoft, apparently because it sometimes more removed he was supposed to.  You can always get it, however, here: http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html

    If you use the Windows Installer Cleanup utility, make a first Restore Point (or back up the registry with C:\windows\erunt).

    If you feel uncomfortable using CIP, download and use For free Revo Uninstaller to uninstall the same applications listed in the FAQ

    Personally, I'd skip step 3 "download Network Magic."  There is really no need for this application and, as you saw, it can cause problems.

Maybe you are looking for