not to install updates on Vista

Similar Questions

• Not to install updates for Vista!

  I have problems to install the new updates for vista.  The installation remains glued to 4 of 15 updates and would not be complete.  I shut down my computer manually.  Any help with this would be great.

  Hello

  ·         You get an error message or code?

  Method 1:

  I suggest that you put the computer to boot and check if you can install the updates:

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, place the computer to a normal startup by following step 7 from the link above.

  Method 2:

  You can also reset the component of windows update and check the issue:

  http://support.Microsoft.com/kb/971058

  Method 3:

  I suggest you follow the steps in the link below and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  (11/05/2011-23:31):
  (11/05/2011-22:50):

  Hello

  I suggest you follow the steps in the link below and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Every time I have download and install updates to vista security I have reinstall mozilla firefox, why?

  Whenever I have download and install the vista security updates I lose Mozilla Firefox. The program and the icon still exist but do not respond. By clicking on the icon or clicking on the program files does produce absolutely no response.
  So any time I install updates, I have to run internet explore and firefox redownload. Most annoying. Help.
  P.S. Yes, firefox is my default browser.

  Some problems occurs when your Internet security program has been implemented.
  trust the previous version of Firefox, but not more acknowledges your
  update as being approved. Now how do I solve the problem: to allow
  Firefox to connect to the Internet

  • Make sure your Internet security software is up-to-date (for example, you are using the latest version).
  • Delete Firefox to list your program of programs approved or recognized. For detailed instructions, see

  Configure the firewall so that Firefox can access the Internet. {web link}

• Re: Satellite A300-1 b 9 - cannot install updates for Vista and IE8

  Hello

  I have a Toshiba Satellite A300 1 9 b I bought 9 months ago. It has Vista Home Premium 32 bit SP1. I have serious problems with the updates:

  1 Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86 - I can't install this for the last two months. Whenever it appears that the installation has failed.

  2 security Update for Windows Vista (KB961501) can be installed as well

  3. my Internet Explorer 8 does not work for the past two weeks. I tried to download it and when I did, then, my computer does not restart. I had to use sans-echec Mode, uninstall IE8 to return to Normal Mode

  4. I also tried to download and install SP2 for Vista, but it failed.

  I am very worried. Please suggest me what I should do.

  Thanks for your help.
  Stéphane

  I think that the decision of the antivirus program is a personal opinion

  I put t like McAfee and Norton because they need a lot of system resources and do a slower computer.
  I prefer AntiVir and Kaspersky Security suite. The two programs have good scan engine and don t need a lot of system resources. They are easy to use to use it.
  AntiVir is free but it s just an antivirus. Kaspersky Security suite also contains a firewall, antispam filter and more.

  It s your choice what program you are using. ;)

• When installing updates for Vista I get the error code 80070490

  Whenever the automatic installation updated it gets error 80070490 and he falils to install all updates

  On what edition of Windows and what level of Service Pack, please?

  (1) you receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  "This problem can occur if there is corruption in component maintenance (EC) manifest."

  (a) run sfc/scannow from a command prompt
  http://support.Microsoft.com/kb/936212

  If the above does not resolve the error...

  (b) download, Saveand then run the update system (or CheckSUR) tool - http://support.microsoft.com/kb/947821

  (c) no joy? To resolve this problem, you can try to perform a repair of Windows Vista or Windows 7 installation
  http://blog.taragana.com/index.php/archive/how-to-do-a-repair-install-to-fix-Windows-7/

  Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the Service Packs and updates that are not included on the installation DVD.

  For Advanced users.

  (2) how to overcome error 0 x 80070490 when installing updates in Windows
  Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  Expert MowGreen Windows IT Pro - consumer safety

• Cannot install updates for Vista Business - codes 8E5E0147, 00009C 47, dt000

  Get codes 8E5E0147, 00009C 47, dt000 when you try to install the updates.  2 codes of the latter appear when you try to download Windows explorer 9.

  Hi MarkVI,

  1. what update does not install?

  Follow the steps below to install the Vista updates.

  Method: 1

  Configure the computer to clean boot.

  View the following command to configure the computer to boot:

  How to perform a clean boot

  Note: After checking in the clean boot, follow step: 7 article to reset the computer in normal mode.

  Method: 2

  Perform the following troubleshooting steps to install updates for Windows Vista.

  Problems with installing updates

  Method: 3

  Also to reset the windows update components.

  How to reset the Windows Update components?

• Problems installing updates windows Vista home 32-bit updates

  Hi, I have several times been impossible to install updates windows update tells me that I need for my computer.
  I have changed the settings from automatic to manual and vice versa and download updates, but are not installed.
  I am never given the opportunity to accept the license agreement.
  Some updates have not been installed.
  8007010B error code
  code 643
  I can't know what code 643 is.
  This has happened for months.
  Can what's up, anyone help?

  Thank you

  Hi zsaire,

  Let us know the updates that need to be download.

  First go through all the steps and then start troubleshooting.

  Step 1: Check if Windows update-related services are set to automatic and started.

  Click Start, type services.msc in the start search box, right-click to services.msc, and then click Run as administrator.

  Check the above services below:
  (a) Background Intelligent Transfer Service
  (b) cryptographic service
  (c) Windows Update

  Step 2: Rename the Catroot2 folder

  To rename the Catroot2 folder, follow these steps:

  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
  2. at the command prompt, type the following commands and press ENTER after each line:

  net stop cryptsvc
  Ren %systemroot%\System32\Catroot2 oldcatroot2
  net start cryptsvc
  output

  3 remove all tmp*.cat to the following folder:

  % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

  If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

  Important: Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

  Step 3: Reregister DLL files that are associated with Cryptographic Services

  To register .dll files that are associated with Cryptographic Services, follow these steps:

  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.

  2. at the command prompt, type the following commands and press ENTER after each command:

  regsvr32 /u softpub.dll
  regsvr32 /u wintrust.dll
  regsvr32 /u initpki.dll
  regsvr32 /u dssenh.dll
  regsvr32 /u rsaenh.dll
  regsvr32 /u gpkcsp.dll
  regsvr32 /u sccbase.dll
  regsvr32 /u slbcsp.dll
  regsvr32 /u mssip32.dll
  regsvr32 /u cryptdlg.dll

  regsvr32 softpub.dll
  regsvr32 wintrust.dll
  regsvr32 initpki.dll
  regsvr32 dssenh.dll
  regsvr32 rsaenh.dll
  regsvr32 gpkcsp.dll
  regsvr32 sccbase.dll
  regsvr32 slbcsp.dll
  regsvr32 mssip32.dll
  regsvr32 cryptdlg.dll
  output

  Note: Click OK if prompted.

  Restart the computer.

  Step 4: Empty the software distribution folder

  1. Click Start, type services.msc in the search box, click services.msc, and then click Run as administrator.
  2. in the Services (Local) pane, click Automatic updates and then click on stop.
  3. reduce the Services (local) window.
  4. Select all the contents of the Windows distribution folder, and then delete them.

  Note: by default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.
  5. make sure that the Windows distribution folder is empty, and then enlarge the Services (local) window.
  6. in the Services (Local) pane, click Automatic updates, and then click Start.
  7 restart the computer, and then run Windows Update again.

  Article number: http://support.microsoft.com/default.aspx/kb/822798

  Step 5: Disable the security software

  Step 6: Scan Run SFC
  Please follow the steps below to the auditor of the filesystem as the first steps:

  1. Click Start and type cmd in the box start the search.
  2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.
  3. at the command prompt, type Sfc/scannow, and then press ENTER.

  Note: The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista CD.

  ================================================================================

  If there are Microsoft .NET Framework listed updates to be installed, follow the steps mentioned in the article:
  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  Thank you and best regards,
  Abdelouahab Microsoft responds to the technical support engineer

• HP 15-r100nia note: cannot install Updats after download

  PLEASE FRIENDS, I CHECKED FOR UPDATE WITH MY LAPTOP BUT AFTER DOUNLOADING, WHEN INSTALLING MY SYSTEM WAS NOT ABLE TO INSTALL UPDATES, HIS WATCH HAS FAILED.

  Thanks @ BHK6, problem solved.
  I have decided to re - run the Windows Update and download batch.

• Computer will not properly install update KB976098 + new software

  I was a lot by browsing this site and saw that many people is facing the same problem. What I did find was a person with software problems.

  My computer was purchased 26/11 this year with Windows 7 pro + Microsoft office home and student . One day Windows were 27 updates to install and therefore has been left overnight. In the morning update no. 27 was still install and never finished. Had to restart the computer to exit the update screen. days later there were 4 updates to install. Still once, the last update was never completed.

  Now, there's only 1 update important remaining, KB976098 , the fix for the time zones that I presume.

  Not only the update will not install, now the new software may not be installed properly:

  I tried some actions (such as downloading stuff, install software, games) while windows tried to install the
  Update:

  • During the installation (for example.) Adobe Reader, Comodo FireWall took more than a minute to display its notice of default on an attempt to install software on the computer and therefore compromised the initial installation.
  • Turn off Comodo Firewall does not solve the problem. Delay of the computer respond when an action of the instalation was performed is the same.
  • The installation of update process could not be stopped once he was "installation."
  • The icon of 'disable' had no notification "update", but once to close the office and displays the message "loging off", the computer is never extinguished.
  • While playing an online game, nothing unusual has happened, no delay on start-up or exit.
  • When you save things like a packadge power point (for conferences of 2007 to display on older versions) the application would freeze and the package has never been created
  • Presentations PowerPoint would have graphics errors, such as the black and white rectangles containing all movable objects.

  After Force-reboot of the computer, cancel the auto-update feature and remove it from the list self-install, I retested evevrything:

  • Adobe Reader has been installed successfully, even with Comodo Firewall active
  • Comodo Firewall has reacted instantly to any attempt installation
  • More online games the same
  • PowerPoint correctly displays images and created packages without error
  • Turn the computer off was possible without forcing the stoppage.

  Now, I'm checking the updates installed and found out there are only installed 23 (in the Control Panel installed updates ). The history of the update displays more than 74 update. As mentioned previously, the first batch of update contained 27 updates, No 23 or 24. I checked some of these updates to the story:

  • There are a few updates, eg. update of security for microsoft office system who have 10 diferent KBs (being the first of its kind, his last KB974234 KB936514). Five of them have been installed twice: KB936514; KB951944; KB954326; KB956828; KB960003

  I guess in these 74 updates, replacents occurred in 23 updates, and some are not microsoft partners to be included in the Panel of installed updates . I really don't know, that's why I am asking :D

  I tried the more possible ways to install the update, downloading it mannualy, disabling the firewall, close all other applications, etc. etc...

  I would like to know the following:

  1. Why is not install update KB976098?
  2. Why other users have the same problem with recent updates?
  3. How to prevent the installation of update if the stop command does not work?
  4. How can I turn off the computer without having to install the downloaded update?
  5. Are double downloaded updates a problem?

  I wrote this for so long now. If I forgot anything, the question might be already in the text.

  Thank you for your time and patience! :)

  Read the "Updates since the previous cumulative Windows time zone update" section of http://support.microsoft.com/kb/976098. If you do not reside in one of these 14 zones, really useless this not (IMHO) security-related update, so you can just "hide":

  1. stop the automatic updates service:

  Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > Right click on run , and then select run as administrator >
  (type or copy/paste) %windir%\SoftwareDistribution > [OK]
  Open the download folder and delete its content
  Close the window.

  3 start | Control Panel | System maintenance and (if you use Classic view, skip this step). Windows Update: Select the installed updates: right click on the Update for Windows 7 (KB976098) | Click hide update | Confirm the prompt UAC (User Account Control), if any, & OK your way out.

  4. start the automatic updates service:

  Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
  Double-click automatic updates > click Start
  (Stopping the service will take a moment)

  =====================================
  To restore/show updates in Win7: Start | Control Panel | System maintenance and (if you use Classic view, skip this step) | Windows Update | Restore hidden updates: Find and select the update you want to install. Click restore. You can now select once again it and install through the normal process.
  =====================================

  Comment: For some reason, a lot of Win7 users have had problems trying to install KB976098. for example, http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/b620bb51-11e9-48f4-9a45-4034498cb8e1

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The KB2833941 could not be installed/updated on my laptop. Error code is 0 x 643. Please help me solve this problem. Thank you!

  The automatic update and the update manual impossible to install/update on my Toshiba Tecra M2 KB2833941 about 6 times since July 10. The error Code is 0 x 643. I couldn't solve it by myself. Please kindly help me to fix it. Thank you!

  Download and run the Microsoft .NET Framework repair tool , then visit Windows Update and let it try to reinstall updates. Once it's done, scan again with Windows Update to ensure that they properly installed.

  If this does not fix it try this...

  Uninstall the .NET Framework 1.1. Then download the .NET Framework Cleanup Tool
  In the drop-down list box, select 1.1 and clean.
  Reinstall .NET Framework 1.1
  Download and install. NET Framework 1.1 Service Pack 1
  Visit Windows Update or Microsoft Update and let it install the rest of the 1.1 updates, including KB2833941

  I would like to know what method worked for you.

  Ref: http://support.microsoft.com/

• When I try to use Windows Media Player 11 I get the message: Windows Media Player is not properly installed on windows vista

  Original title: MediaPlayer does not open. Followd Scout121 answr. Got the message: not recognized as int/ext control.  Help!

  I followed the directions for the question of Scout121, posted by Bikesh T 20 October 2011.  When I entered the "regsvr32vbscript.dll", I got the message: is not recognized as internal or external, command an executable program or batch file.

  We have Windows Vista Home Premium 32 bit version 6.0 (Build 6002: Service Pack 2).

  I received a validation code windows, but when I try to use Windows Media Player 11 but the message: Windows Media Player is not properly installed.   When I try to install the player form Microsoft Web site, I get the message that the installation has failed.

  Please notify.  We are clueless.  Thank you.

  Hello

  What troubleshooting steps you have done until now?

  Click on the link below and run the fixit.

  Method 1: Solve the problems of Windows Media Player video and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

   

  Method 2: Disable Windows Media Player and then turn it on to Windows features and check if the problem persists.

  Disable and enable Windows Media Player and check if it opens.

  (a) click Start and select Control Panel.

  (b) click on programs and features.

  (c) click on or turn off Windows features turn on on the left side.

  (d) develop the features of media; clear the check box Windows Media Player.

  (e) click Yes and OK to continue.

  (f) restart the computer.

  Note: If windows media player is already disabled, follow the steps mentioned below:

  After the restart, follow these steps:

  (a) click Start and select Control Panel.

  (b) click on programs and features.

  (c) click on or turn off Windows features turn on on the left side.

  (d) develop the features of media; Check the Windows Media Player.

  (e) click Yes and OK to continue.

  (f) restart the computer.

  This would be re - install windows media player 12.

  See the link: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-features-on-or-off

  Method 3: Perform scan of SFC (System File Checker) and see if the problem persists.

  http://support.Microsoft.com/kb/929833

  Let us know the status of the issue.

• Update to Windows 7 SP1 installed, but not in installed updates or system

  Recently, I installed Windows 7 x 64 Ultimate on my pc and then with the update. All the updates successfully without error. Win7 SP1 update was also without errors. It shows in the history of the update, but not in the installed updates or computer properties. IE11 and Visual Studio will not install because they need SP1. I can't uninstall the update to try again because he's not here but windows update does not offer it (also tried the variant of the command prompt to uninstall does not work). I tried to reinstall the whole system, and it ends up the same thing again. Someone knows how to fix this problem or at least Visual Studio works without SP1?

  Restart your computer and wait 30 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Windows 8 is not to install updates

  OK, so I just bought this computer (desktop) with Windows 8, I am trying to download Windows 8.1 and it says that I need to first update Windows 8.

  I go into the settings of updates and it shows 94 available updates, but it will not download them. I'm going to solve problems and it shows me error with: registration for the Service is missing or damaged, the recent updates installation problems and check for missing or corrupted files.

  Any help?  Thank you!

  OT: Windows 8 is not updatding

  Hello

  1. which antivirus program is installed on the computer?
  2. don't you make changes to the computer before the show?

  Usually, you get this error during the installation of the software updates. If Microsoft found some problems in the digital signature of the update is when you usually get this error.

  Method 1: I suggest you run the utility of Windows Update and see if that helps.
  Windows Update Troubleshooter

  Method 2: I suggest you to scan SFC. The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. When the analysis is complete, the System File Checker tool indicates whether integrity violations were found. If integrity violations are detected, the System File Checker tool difficulty integrity violations. See the following article about how to proceed.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833

  See also the link: Problems with installing updates
  http://Windows.Microsoft.com/en-CA/Windows/troubleshoot-problems-installing-updates#1TC=Windows-8

  I hope this helps. Let us know if you have other problems with Windows in the future.

• How to install updates that does not have install for Windows vista

  Update KB 3178034, KB3167679, KB3177725, KB3175443, tried to install, but failed. It is a windows Vista Home Premium 64-bit operating system. These updates can be installed and how?

  Windows Vista is still a usable operating system?  I'd appreciate any help.

  Try the following: KB3185911 to install it manually.

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=53697

  The preinstallation is required for Windows Update works correctly in September. KB3177725 has been replaced and will not be offered again. If others should fail this time, there are options available to install manually, too.

  Best regards, VZ

• T61 Wireless does not not after installing updates of wireless and electric management

  Few days back I have updated my T61 (via ThinkVantage - update my system) and there was 2 updates related to:

  (1) wireless

  (2) power management.

  Since the update, my wireless is not working. I tried to uninstall and install the wireless driver. I have created a new home network, but nothing helped. Radio off and on. Ethernet connection works fine

  Wireless adapter is: Wifilink Intel 4965AGN

  OS is Win XP with SP3

  Was wondering if anyone else has experienced similar problem.

  Thank you

  Harish

  Thank you all for the responses.

  After trying various combinations, below think fixed my problem

  1. on my DLink router, change the level of security WPA2 only (previously the WPA2-PSK)

  2. then I changed the setting wireless on my T61 such that Windows would be Manager wireless

  It seems that the question was a tug of war between Lenovo and Windows tries to manage wireless.

  Its been 8 hours now and I do not see the symptoms so far.

  Thanks again.