not to run another operating system at startup

Similar Questions

• Error - the computer is running an operating system Microsoft Dynamics CRM does not support for the installation of the Extension of reporting Dynamics CRM 2011.

  Original title: Dynamics CRM 2011 Extension of reporting facility.

  Nice day

  Asked me to install this program called Extension Microsoft Dynamics CRM 2011 report Authoring on one of our PC network operations.  The computer is a Dell OptiPlex 960 under Windows XP SP3.  When attempting to install the program, you get the following error message:

  The computer is running an operating system Microsoft Dynamics CRM does not support.  To install this product, you need to upgrade your computer to an operating system supported.  For a complete list of supported operating systems, see the documentation for Microsoft Dynamics CRM (http://go.microsoft.com/fwlink/?LinkID=181018)
  For additional detals see logfile C:\Documents and Settings\bcodom\Application Data\Microsoft\MSCRM\Logs\BIDSExtensionsSetup.log

  Now, normally, I just coordinates with the end-user to him upgrade to Windows 7, however, after watching on the download page of this application (http://www.microsoft.com/download/en/details.aspx?id=13818), I noticed that Windows XP is one of the supported operating systems that can be installed on.  In addition, after looking around on the Technet documentation, I was not given a definitive answer on whether or not this application is not supported on Windows XP.

  So, my question is creation of Microsoft Dynamics CRM 2011 report Extension works on Windows XP SP3, or do we let us upgrade this computer to Windows 7?  Thank you!

  Hi Bcodom,

  In dealing with the problem to install the Extension of Microsoft Dynamics CRM 2011 report creation, I would recommend you to post your question in the help link.

  http://social.Microsoft.com/forums/en/CRM/threads

  Hope the helps of information.

• during the installation of Vista Service Pack 2, the computor has been disconnected. Now, I don't have an operating system and startup repair does not work. What should I do now?

  Computor was disconnected during the installation of Vista Service Pack 2. I did now no operating system and startup repair does not work. What should I do now?

  You may have to reinstall Vista from the original media or from the recovery partition according to the type of computer you have.

  Hope that you made the backup recommended all of your data before attempting to install Vista SP2.

• Hi guys, I have subscribed to lightroom but can not install the program error "you run an operating system supporting Lightroom is more."

  You run an operating system supporting Lightroom is no longer.

  Hi Lahaina,

  Please check this link to see if your machine is compatible with Lightroom:

  The system configuration required

  Just in case if it is not please upgrade your operating system or contact support to cancel it:

  Customer contact car e

  Kind regards

  Megha Rawat

• Received the following message when you try to install Photoshop CC "you run an operating system that Photoshop no longer supports. See the system requirements for a complete list of the supported platforms. "So I use Windows Vista not sure do I

  Hello

  I received the following message when you try to install Photoshop CC, "you run an operating system that Photoshop no longer supports. See the system requirements for a complete list of the supported platforms. »

  I use Windows Vista so not sure what to do now! Any help would be greatly appreciated thanks.

  CC of Photoshop only works on Windows 7 or Windows 8/8.1. No Vista.

  System requirements | Photoshop

• The VM startup slow down, delay long before the guest operating system begins startup

  Evaluation of VMWare to set up the VM for the maintenance of the software. Set up a virtual machine, install Windows 7 SP1 32-bit, everything works well. Once started, the performance is excellent.

  The symptom is that when you start the virtual machine, either starting from cold boot or suspend, there is a significant delay before the power of VMware on / start screen is displayed. Once it appears, the operating system starts starting (or the recovery of wakefulness) quickly and performance is normal after that. During the start-up period, the whole system is insensitive, host and guest operating system.

  See the extract of newspaper below to 09:54:28.619 moment where the delay occurs followed by the entry concerning 09:55:11.625 time when start continues, a delay of 43 seconds during which nothing seems to happen and the system does not respond. After that, everything is fast.

  Any ideas or suggestions?

  More info...

  VMware Player version 6.0.1 build-1379776

  Host PC: Dell Optiplex, Intel Core2 Quad Q9650 3.00 GHz ABLE to

  Installed memory: 4.00 GB (3.25 GB usable)

  Boot disk C: Intel SSD, 180GB (where the VMware is installed)

  Data disk F: Seagate 1 TB (where the virtual machine)

  SE host: Windows 7 Professional 32-bit SP1

  Guest OS: Windows 7 Professional 32-bit SP1

  excerpt from VMware.log:

  2014 02-19 T 09: 54:28.619 - 05:00 | VMX | I120: VMMEM: initial booking: 1442MB (1024MB = MainMem)

  2014 02-19 T 09: 54:28.619 - 05:00 | VMX | I120: MemSched_PowerOn: minGuestSize ball 104857 (80% size required min 131072)

  2014 02-19 T 09: 54:28.619 - 05:00 | VMX | I120: MemSched: mem reserved (in MB) min max recommended 128 2493 2493

  2014 02-19 T 09: 54:28.619 - 05:00 | VMX | I120: PShare: activated 1 1 Adaptive scanRate [16, 400]

  2014 02-19 T 09: 54:28.619 - 05:00 | VMX | I120: MemSched: mem 5159 262144 np 35890 pg 590258 anon

  2014 02-19 T 09: 55:11.625 - 05:00 | VMX | I120: MemSched: numvm 1 locked pages: num 0 max 605661

  2014 02-19 T 09: 55:11.626 - 05:00 | VMX | I120: MemSched: locked Page limit: host 638514 config 638208 dynam 613853

  2014 02-19 T 09: 55:11.626 - 05:00 | VMX | I120: MemSched: minmempct 50 minalloc 0 admitted 1

  2014 02-19 T 09: 55:11.626 - 05:00 | VMX | W110: NUMA: application of automatic dimensioning VM ignored

  configuration (.vmx) VM file:

  . Encoding = "windows-1252".

  config.version = '8 '.

  virtualHW.version = "10".

  scsi0. Present = 'TRUE '.

  scsi0.virtualDev = "lsisas1068".

  SATA0. Present = 'TRUE '.

  memsize = "1024".

  MEM.hotadd = 'TRUE '.

  scsi0:0. Present = 'TRUE '.

  scsi0:0. FileName = "BCDEVVM.vmdk".

  SATA0:1.present = 'TRUE '.

  SATA0:1.filename = "E:".

  SATA0:1.DeviceType = "cdrom-raw"

  ethernet0. Present = 'TRUE '.

  ethernet0. ConnectionType = "bridged".

  ethernet0.virtualDev = "e1000".

  ethernet0.wakeOnPcktRcv = "FALSE".

  ethernet0. AddressType = 'generated '.

  USB. Present = 'TRUE '.

  EHCI. Present = 'TRUE '.

  ehci.pciSlotNumber = "35".

  Sound.Present = 'TRUE '.

  sound.virtualDev = 'hdaudio '.

  sound.fileName = 'speakers (SoundMAX Integrated D.

  Sound.AutoDetect = "FALSE".

  MKS. Enable3D = 'TRUE '.

  Serial0.present = 'TRUE '.

  Serial0.FileType = "thinprint".

  pciBridge0.present = 'TRUE '.

  pciBridge4.present = 'TRUE '.

  pciBridge4.virtualDev = "pcieRootPort"

  pciBridge4.functions = '8 '.

  pciBridge5.present = 'TRUE '.

  pciBridge5.virtualDev = "pcieRootPort"

  pciBridge5.functions = '8 '.

  pciBridge6.present = 'TRUE '.

  pciBridge6.virtualDev = "pcieRootPort"

  pciBridge6.functions = '8 '.

  pciBridge7.present = 'TRUE '.

  pciBridge7.virtualDev = "pcieRootPort"

  pciBridge7.functions = '8 '.

  vmci0. Present = 'TRUE '.

  hpet0. Present = 'TRUE '.

  usb.vbluetooth.startConnected = "FALSE".

  displayName = "BCDEVVM."

  guestOS = "windows7"

  NVRAM = "BCDEVVM.nvram."

  virtualHW.productCompatibility = "hosted".

  gui.exitOnCLIHLT = "FALSE".

  powerType.powerOff = 'soft '.

  powerType.powerOn = 'soft '.

  powerType.suspend = 'soft '.

  powerType.reset = 'soft '.

  extendedConfigFile = "BCDEVVM.vmxf".

  gui.lastPoweredViewMode = "full screen".

  UUID. BIOS = "56 4 d d2 32 bb c9 b7 bd 3 c d2 46 59 38 e3 e6 f2"

  UUID. Location = "56 4 d d2 32 bb c9 b7 bd 3 c d2 46 59 38 e3 e6 f2"

  Replay.Supported = "FALSE".

  Replay.FileName = «»

  scsi0:0. Redo = «»

  pciBridge0.pciSlotNumber = "17".

  pciBridge4.pciSlotNumber = "21".

  pciBridge5.pciSlotNumber = "22".

  pciBridge6.pciSlotNumber = "23".

  pciBridge7.pciSlotNumber = "24".

  scsi0.pciSlotNumber = "160".

  usb.pciSlotNumber = "32".

  ethernet0.pciSlotNumber = "33".

  sound.pciSlotNumber = "34".

  vmci0.pciSlotNumber = '36 '.

  SATA0.pciSlotNumber = "37".

  scsi0.sasWWID = "50 05 05 62 bb c9 b7 b0.

  ethernet0.generatedAddress = "00: 0C: 29:E6:38:E3.

  ethernet0.generatedAddressOffset = '0 '.

  vmci0.ID = "1508260067".

  vmotion.checkpointFBSize = "134217728.

  cleanShutdown = 'TRUE '.

  softPowerOff = 'TRUE '.

  USB:1.speed = '2 '.

  USB:1.present = 'TRUE '.

  USB:1.DeviceType = "hub".

  USB:1.port = "1".

  USB:1.parent = "-1".

  SATA0:1.AutoDetect = "FALSE".

  tools.syncTime = "FALSE".

  unity.wasCapable = "FALSE".

  tools.remindInstall = "FALSE".

  toolsInstallManager.updateCounter = '1 '.

  checkpoint.vmState = «»

  Monitor.virtual_mmu = "automatic".

  Monitor.virtual_exec = "automatic".

  USB:0. Present = 'TRUE '.

  USB:0. DeviceType = 'hidden '.

  USB:0.port = "0".

  USB:0.parent = "-1".

  USB. Generic.AutoConnect = "FALSE".

  serial1. Present = 'TRUE '.

  serial1. FileName = "COM1".

  floppy0. Present = "FALSE".

  Hello

  I know what you want to say as I've seen sometimes as well. But especially on older hardware or if there are problems with regard to particular resources. For example I saw this on an ESX host (yes I know product different) where there was a problem with the storage not enough providing IOPS / s.

  I saw also this on older versions of Linux (IIRC 7) workstation where the host had an Atom based CPU, there I updated to more RAM and a more recent version of the workstation and the problem disappeared.

  Then I also saw it on the 4/5 merger when my host operating system was out of memory and I tried to start another operating system to prompt anyway.

  I do not consider a normal behavior for the slow start and does not respond, it is an indication that the hypervisor is seeking some resources, but does not receive them fast enough.

  The reasons can be many. Indeed things like antivirus could be biting you if she tries to analyze all files (including virtual disks) at their opening.

  FWIW, I also understand the support response as would be expected if your host is a bit thin on the resources (for example, trying to start a VM 1 GB on a host Win7 with only 3.5 GB of RAM) and if the virtual machine runs OK after the initial startup delay, it's mostly just an annoyance.

  --

  Wil

• Satellite P100-324 - GPU overheating due to fan does not work in the operating system

  Hello world.

  While trying to solve the problem of RAM of 4 GB ([this thread | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=28374&tstart=0]), I meet another weird thing - gpu overheating due to fan does not work in the operating system.

  Now, I restored the XP MCE using the Toshiba Recovery and I was VERY surprised to see that the problem still exists! As soon as loading the system GPU fan stops, and there is only tranquility. The application load is heavy on GPU and reaching 104 results by reducing its GPU and MEMORY clock values and NOT in the activation of the fan.

  The same thing happens in 64-bit gentoo. ACPI can be turned on or off, it is not serious, the GPU fan always dies as soon as the system load. In non-OS environments (bios, program of recovery, etc.) the fan works fine, GPU cooling from time to time.

  This problem occurs in versions of BIOS: 2.40, 4.00, 4.20.

  Any help would be greatly appreciated, since this laptop is my main working tool and I can't let go 14 days (service).

  I saw in your other thread that you have updated the BIOS and you have installed several different OS.

  Fact is that the BIOS v 4.2 package contains BIOS 32-bit and 64-bit OS.
  Your laptop has been preloaded with Win XP MCE 32 bit. Please use the 32-bit BIOS if the original XP MCE running on the laptop.

  Best regards

• T610 with Windows Embedded 7 - the system does not license for the operating system image

  Hello community,

  I bought a refurbished computer ThinClient T610 that is running a Windows 7 Embedded English. The label on the package says, that the computer ThinClient is allowed with W7E. When I now run Easy Tools installed on the computer ThinClient hp to create a USB Image with the German language, everything works fine: the image is downloaded from the web and put on the stick.

  But after you start the stick, the installation program tells me: "the system does not license for the operating system image. What I am doing wrong? The BIOS is already the latest.

  Or y at - it another way to transform the operating system in German? There should be an option to download additional languages, but this particual window has no other options. And I have not found any manual way to download other languages.

  Concerning

  Michael

  Sometimes it can be so easy... ;-)

  So here's my solution:

  1. go on the Web for hp Support site

  2. go in the software and driver download

  3. set the language of driver on the language of your choice (in fact: it was the main problem)

  4. download an operating system image

  5. run the configuration tool and copy the image of an operating system on a flash drive

  6. restart the workstation and install the os

  7. take advantage of your computer ThinClient in the language of your choice

  I don't know, why the hp Easy Tools downloaded the image of evil, but with this solution, that I find myself at the same point, as if they did.

• Message "this application will not work in this operating system" at the start.

  Original title: this application will not work in this operating system

  After starting, I get this error message:

  Stop: this application will not work in this operating system

  What application is this? How can I fix? I am running XP SP3

  CZFMDXPK c:\program files\fdd + fever disease combo reader\czfmdxpk.exe a the culpit. The problem is resolved and no Malware found. eventvwr helped me identify other problems, and now I'm curious on how to disable the stubborn programs in msconfig. I'll get.

  You did a great job and thank you very much. Have a beautiful weekend. Rainer

• Problem AnyDVD update 'AnyDVD does not work on your operating system'

  For many years, I used a system called 'AnyDVD '. Today I received a memo to update to the latest version I've done dozens of times in the past.
  This time, however, I have download the new item and click on "run" the file, I get a pop-up window indicating. "AnyDVD does not work on your operating system. .....
  I'm no computer expert so I don't have any idea what to do... I tried a system restore to a few days, but that did not help.
  In the meantime, the previous version of AnyDVD still works as always. How can the old system works but now an update does not work on my operating system. That makes no sense.

  Thanks for the comments... But does not apply to this problem. AnyDVD has free updates. Problem was somewhere in the system and can be corrected within 24 hours and was able to update with no further incident. Still a mystery, but is no longer a problem.

• Cannot convert a computer unalloacted on a new space, dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters.

  I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.

  I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.

  Need additional details as
  Is it a laptop or a pc?
  Have you coveted your dynamic disk basic disk?
  What the structure of partition on your computer?

  recover with these details...

• Clean? Windows 7 restarting on formatted drive, 100 MB Partition not allowed no previous operating system, after the attack of virus, it reach the wifi drivers to not load or display in the new operating system?

  Left attack virus serious that some files disabled in windows 7 (protected by Microsoft Security Essential) a program used on the computer was left partially disabled and I continue when using wireless internet. Reformatted drive leaving 100 MB Partition intact, created in new OS was an old file of Windows not wanted, impossible any attempt at the value of the days of updates, downloads & allowing also noticed wifi. Another reader reformat leaving 100 MB partition again not affected since the original OS. All programs loaded & all updates succeeded, but still did not have through any discussion read to get the computer to WiFi wifi as in Starbucks invites you to discover. I have another operating system on the computer that is able to discover drive internet wifi from loading with windows 7 so not a hardware problem, I think. Question is can a formatted drive on the left with its original partition of 100 MB OS questions with new reloaded windows 7 and is the new installation of the operating system clearly & repopulate this partition of 100 MB for no bug cannot continue to corrupt and better performance? Thank you all.

  A new installation of windows 7 can be said to delete this partition. do you when you get to the section "where do you want to install windows?" in installing windows 7. There is a player options button that allows you to delete both partitions... then create 1 new partition for windows and it throws a message saying that the operating system can create additional partitions... blah blah... and she... that way the 100 MB partition is clear. MyPcHealth - free tools

• This application is not compatible with the operating system installed. Please upgrade to Windows 98SE, Windows 2000 or more.

  Hi all

  I recently installed a mod for S.T.A.L.K.E.R SoC V1.004. The game won't start not even, instead, it gives me the following message:

  This application is not compatible with the operating system installed.
  Please upgrade to Windows 98SE, Windows 2000 or more.

  I'm under Win 8 64 bit. I have uninstalled and rebooted twice (both game and mod) does not.

  I have to downgrade to XP to be able to play this awesome mod, he ran on this platform with the same configuration before, why he now rejects it know not only the people at Ms.

  Please help if possible

  Thank you very much

  Pierre Viljoen

  Probably, all in all probably is a 16-bit program, and as such does not work on Windows 8.0/8.1 64 bit. In addition, the game seems to have 20 years or more. You can try running in compatibility mode, but I think that the game is dead. Hope this helps and if you need help please post and we will be happy to help you.

  The above opinion is mine and casually and does not necessarily reflect that of Microsoft, they are employees. or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe"-John Muir

• Why do I get a message saying 'you are running an operating system that InDesign can't. See the system requirements for a complete list of the supported platforms. » ? What does that mean?

  Why do I get a message saying 'you are running an operating system that InDesign can't. See the system requirements for a complete list of the supported platforms. » ? What does that mean?

  This means that your machine does not meet the requirements of system for InDesign.  Check the system requirements for InDesign against those of your machine to see where your machine is delivered in default.

  InDesign - http://helpx.adobe.com/indesign/system-requirements.html

• "You run an operating system supporting Illustrator is more." See the system requirements for a complete list of the supported platforms. »

  I am with a printing company large format and I'm trying to download the trial for illustrator to have a better understanding of what I do. I am a first time user and have virtually no experience in this field, I received this message "you run an operating system supporting Illustrator is more." See the system requirements for a complete list of the supported platforms. "I don't know the measures that must be taken to be able to download it?

  Here's what I know on this computer, I use google chrome.

  
  

  My system is Windows Vista Home Premium Service Pack 1

  Manufacturer Toshiba

  Intel Core 2 Duo CPU T5750 @ 2.00GHz processor 2.00 GHz
  Memory (live RAM) 4.00 GB

  Type 64-bit operating system

  C: 230 GB of free GB 296

  I don't know if you need this information or not but any help will be greatly appreciated.

  Thank you!

  Brittany

  The message indicates that your system does not neet the system requirements for the version of Illustrator, you are trying to use.  If this is the latest version of Vista is probably too old to meet the requirements.  In any case, here is a link to the system requirements for all versions of Illustrator... choose the one that you try to use and compare their needs to your system to see where you come up short...

  Illustrator - http://helpx.adobe.com/illustrator/system-requirements.html