Notebook Synaptics TouchPad on HP 625 computer wheel

Similar Questions

• Computer HP laptop 15ac122tu: after installing windows 10 my Synaptics touchpad sometime becomes more sensitive.

  My Synaptics Touchpad some time become automatically more sensitive.  I don't know how. Adjustment I make sensitive average but it automatically after that some time, become more sensitive because what I can't select anything correctly.     I recently updated my laptop for windows 10 8.1 hp service center for 2 days this problem persists there.   MY LAPTOP PRODUCT COMPUTER = HP 15AC122TU NOTEBOOK. 6 MONTHS. PLEASE HELP ME

• touchpad does not work until running Synaptics touchpad

  Hello

  I bought the Hp pavilion dv6 - 6 c 55 and I have problem with my touchpad. Its functions (scroll, zoom, two finger scrolling,...) fact does not not after cranking up that I run Synaptics touchpad version 7.5. I am using windows 7 Home premium 64-bit, which was on my laptop when I bought it. I checket from msconfig.exe items and my touchpad driver has been chosen, how can I solve this problem? I appreciate if there is no solution and help me.

  Hi Last_man,

  Thank you for visiting the Forums HP's Support and welcome. I read that your wire on your HP Pavilion dv6 - 6 c 55 Entertainment Notebook and questions with the here is a link to the download version more returned for Windows 7 because I think you are using the version for Windows Vista. You may need to uninstall the version you have now and restart the computer, it should automatically update the new version in for you.

  I hope this helps.

  Thank you.

• Synaptics touchpad 64-bit improvements has stopped working.

  Hi guys,.

  I recently bought new HP 15-r022tx Notebook PC (product number: J6M27PA) which comes with free back, installed windows 7 x 64 and set to update all drivers HP online, after all the last update I get an error message at startup "synaptics touchpad 64-bit improvements has stopped working".

  

  have tried to configure the settings of the mouse but wen I try to access the setting of the mouse, I get an error message "unable to connect to the synaptics pointing device driver.

  

  have uninstalled and re installed driver from hp support still the same problem.

  so after some research online and no luck in one of them, I continued using tour by closing the program on the first error message every time you start no function touchpad synaptics as two key scrolling, zoom etc... but sometimes the cursor jumps erratically all about and moves on its own with no contacts in the touchpad, click options do not work wen cursor strats to move each time you start himself, after an observation that I noticed that the mouse works well on (by closing the program some special functions on the error without touchpads) until I right click it (sometimes after the first click a few times After several clicks) until I right click on using the keyboard, the mouse seems to be working well but after I right click of the mouse, he goes to his way.

  any suggestions guys

  Thanks guys...

  Finally, I found a fix for the touchpad driver. Looking at the page of the recommended laptop touchpad driver laptop 15-r022tx, I noticed that in the tab system requirements, only Windows 8 is mentioned. It seems that this driver only works for Windows 8. In Google search again for the Synaptics touchpad driver, I found this link to the HP Web site.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&softwareitem=ob-116587-1

  This driver is supported for all variants of Windows 7 - x 32 and x 64 (as told by the website).

  The driver in this link works perfectly well for computer laptop 15-r022tx. Downloaded and installed the driver. He followed with a reboot. The multi touch features and scrollbars now work correctly in my Windows 7 x 64 operating system.

  PS: If this solution helped you, please give a shout out to this post.

• Synaptics TouchPad software missing.

  Operating system:

  Window 7 Home Premium.

  My machine:

  HP Pavilion dv6-3225dx notebook PC

  {Information}

  Product number: XY980UA

  I'm on Synaptics TouchPad, it works, but I can't find it's new software as I had that software in my laptop starting, "touchpad does not work as I see videos of the"Synaptics TouchPad"folder, I mean scroll or other features do not work." C:\Program Files\Synaptics\SynTP

  Synaptics TouchPad

  Paint Synaptics device.

  Best regards;

  AFAQ

  Hi Afaq,

  First, download the latest installer driver Synaptics, on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp52001-52500/sp52352.exe

  Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

  When this has completed, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  When windows loaded again, you should now configure options such as scrolling etc. - see the guide on the link below for more details.

  Configure the ClickPad.

  Kind regards

  DP - K

• Synaptics Touchpad not working not

  My touchpad driver stopped working yesterday evening. In the morning it was working perfectly and suddenly he stopped. I've uninstalled and reinstalled the driver but its still does not. Please help me

  Uninstall the Synaptics Touchpad drivers via Control Panel > programs and features, restart the computer and install it on day one from here

• Laptop HP dv6 1355dx Pavilion: Synaptics Touchpad Will not scroll in applications Windows 10 - using HP dv6 1355dx Pavallion laptop

  I was wondering if anyone has found a solution to this problem.  I downloaded all the drivers, registry added/changed, ensure that scrolling is checked and researched point nausium.  Hair is gone!

  Any help is appreciated.

  HOW TO TROUBLESHOOT THE TOUCHPAD SETTING RESET

  1. Download version 18 of the Synaptics TouchPad Driver and software.
  • Navigate to HP Software and Driver Downloads site (http://www8.hp.com/us/en/drivers.html) to find the last pilot approved for your model.  Filtrer filter by version, select Microsoft Windows 8.1 on the menu drop-down.  Find the download in the category 'driver-keyboard, mouse and input devices.  If a Synaptics driver with a version from 18 number figure, download.
  • If a Synaptics driver with a version from 18 number is NOT listed, download the driver directly from HP (http://ftp.hp.com/pub/softpaq/sp68001-68500/sp68198.exe).
  2. Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
  3. Change the Windows Update Services automatic (delayed start) parameter to the manual.
  • In Control Panel, select administrative tools, and open Services.
  • Go to Windows Update and double-click it to view its properties.
  • Click on stop to stop the service to run.
  • Change the Startup Type to manual, and then click OK.
  4. Uninstall the version 19 of the Synaptics TouchPad driver.
  • In Control Panel, select Device Manager.
  • Click on the "+' beside 'mouse and other pointing devices" to expand this category.
  • Double-click the Synaptics TouchPad of SMBus to view its properties.
  • Go to the driver tab and click on uninstall.
  • Check the box to delete the driver for this device, and then click OK to uninstall.
  5. Uninstall the version 19 of the software Synaptics TouchPad (HP control area).
  • In Control Panel, select programs and features.
  • Scroll down to the area of control of HP (published by Synaptics Incorporated) and uninstall it.
  6. Restart your computer.
  7. Install version 18 of the Synaptics TouchPad Driver and software.
  8. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates for the Synaptics TouchPad driver.  (This will block your system automatically reinstall or display of updates for the version 19 of the pilot).
  9. Change back the setting of Windows Update Services to manual automatic (delayed start).
  10. Restart your computer.
  11. Rejoice!  Your TouchPad settings will save eventually in the sessions again.

• The faulty Synaptics Touchpad on x 2 13-m121sa Split driver causing frost and lack of response from the mouse

  Edit: I found a solution, scroll down.

  I had problems with my new Split x 2 similar to those already explained in the forums by other users. The symptoms are:
  
  1. unusual hanging or freezing of the mouse pointer on the screen and the use of gestures temperament (two fingers to scroll, zoom, etc.).
  
  2. slowdown in the computer in general; acting lethargic and freezing during light use or after closing the display.
  
  The symptoms seem to change according to the duration of the computer was operated and are affected by the screen from the dock of disconnection/reconnection.
  
  Being very good with these things, I decided to investigate and discovered the following:
  
  The root cause of both problems is the driver for the Synaptics Touchpad. While the latest version available on the HP website (17.0.10.9) seems to solve all unusual freezing of the pointer it has a large memory leak. In other words, when you move it on the touchpad pointer uses the memory of the computer. This is normal, but the problem is that the driver for the touchpad does not return memory; It cannot be reassigned. In other words, after a few hours of computer use (or to have the display closed) memory reached saturation point and the version of the computer to a halt.

  If you encounter the same problem take a look for yourself: open the Task Manager and look at the performance tab. Under the brief entitled you will find a value for "Non paged pool. With the computer idle, this number will not rise, but move the mouse and you will see it go gradually upwards without return. I have confirmed this to be the Synaptics driver using the Windows tool poolmon.exe - the culprits are the Irp and SynT.

  About the solutions, I tried a lot - but there is no absolute solution.
  
  You can uninstall the Synaptics Touchpad driver and the problem will disappear - the memory usage is no longer freezing or high. But unless the driver that the computer is to use the standard Windows driver - there is therefore no multitouch gestures like scroll or zoom in.
  
  I tried to install the generic Synaptics driver available on their site, and the computer will not allow him. Regardless of this, I forced the installation of the driver, but the generic driver does not work with this Touchpad anyway (error code 10). I tried the latest version (17.0.19) and a former one (16.2.21) without success. Even earlier (e.g. 15.x.x) refused to run on the grounds of incompatibility.

  HP support suggested a "Refresh" of system setting to factory, but put aside from the huge inconvenience of time and losing files - I know that this does not work either. Apparently a clean install worked for a single user - but for this you need an installation of Windows or USB disc that I did not - and I am skeptical that it would work anyway.
  
  So now I use the touchpad driver Windows standard without being able to scroll, zoom or use them slide-in gestures of Windows 8.1.
  
  If a representative from HP is reading this, I strongly suggest that this issue be escalated. A simple update to Synaptics could solve this problem which is causing the computers people freeze and lose your support staff time.
  
  TL; DR: Driver HP Touchpad is defective and causes a memory leak. Synaptics has generic drivers do not work. And the standard Windows drivers are not satisfactory.

  SOLVED!
  
  Through my own research I found a solution. While the most recent driver listed under this model is 17.0.10.9 it is actually a newer version which doesn't have this problem: version 17.0.10.16!
  
  I am always disappointed that HP has not suggest this solution themselves, given this driver was published in November 2013! HP if you're reading this: Please allow this driver for this model in your support pages.

  In any case, the solution is:
  
  1. open Device Manager (Control Panel-> hardware and sound-> Device Manager)

  2 in the 'mice and other pointing devices' open «HID Synaptics TouchPad»

  3. in the "Driver" tab, click "Uninstall".

  4. the pointer will disappear - restart the computer

  5. download the new driver from here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=uk & lc = on & softwareitem = ob-127354-1

  (if that link fails try to search online for 'synaptics driver 17.0.10.16')

  6. open and install the driver

  I hope this helps. HP, please send my consulting fees through PayPal (!)

• Satellite L955 - 10K - Synaptics Touchpad Driver is not working properly

  Hello, ASRR here.

  I had a problem with my driver for the Synaptics touchpad yesterday. I'm very used to use the "gestures" to work with my touchpad and the gestures did not work properly (in fact at all) for a while. Scrolling with two fingers, three fingers touch and others (in fact all the gestures) no longer work.

  The cursor moves, and works fine but not gestures.

  When I go to mouse option in the Control Panel, a window appears indicating that the PC is "Unable to connect to the Synaptics Pointing Device Driver." and asks me if I want to uninstall.

  I have tried to uninstall, and then go on to Toshiba support page and download a driver that has been adapted for my model, operating system, etc..

  When I implemented the driver I downloaded and restart the PC, the same window appears when I try to go in mouse options in Control Panel and gestures don't work.

  An interesting thing I noticed though, is the fact that when I back the driver (in the settings to properties then Hardware) gestures do FINE. However, as he always asks you to restart the computer for Rolling back the driver will take place, when I restart it, it defines the Microsoft 2006 touchpad driver. who does not understand the gestures that I need.

  I tried several times to fix it, but I can't. I went the UEFI firmware set up and tried to restore default but without success.

  I really don't know what to do. Could someone please help?

  My Toshiba model is a Satellite L-955-10 K with a 64-bit processor and system of operating Windows 8 initially installed.

  Any help would be greatly appreciated. Thank you

  > I went the UEFI firmware set up and tried to restore default but without success.
  How to understand this? Have you tried to put your laptop to factory settings?
  To be honest I don't understand what the problem is here. I also thought that the new driver installation can help but obviously it didn't help much.

  I don't know if this is an option for you, but you can set laptop to factory again and I hope that everything will work properly again. Before doing this test also to roll back OS to an earlier time using System Restore option.

  One last thing: it has nothing to do with your touchpad problem, but I recommend you create a recovery (recovery backup image) using pre-installed recovery media creator media.

• Synaptics touchpad is not working properly on the Satellite A100-635

  My synaptics touchpad is not working properly my mouse works very well but does not work in every corner of the touchpad for special functions.

  I tried to set it up again but it had no result, also I downloaded a new driver, but it had no results to. My buttons multimedia keys like play/pause or stop are not no longer works.

  These buttons/keys stopped working at the same time as the touchpad. Checked with NOD 32 pro virus and spyware with ZA pro ==> no results.

  Who can help me with this problem?

  Hi Jarno

  Do you know how many different Satellite notebooks have a series? Drivers and tools are not the same for each of them. Because of this you should also tell us that you have.

  According to your description, I can tell you: install OS using support and recovery delivered with factory settings, your mobile phone must be configured correctly.

• How can I disable tapping on Satellite A210-103 with a Synaptics touchpad

  Hello

  How can I disable tapping an A210-103 with a Synaptics touchpad.
  Tapping means to me, that when I touch the touchpad of the notebook translate under circumstances like a mouse click, on which I don't want.

  In the settings of the Germans, I found nothing of such "tapping."

  Jürgen

  Hello, Hans Juergen

  Of course, you can turn off the tapping.

  I assume that you want to disable this tapping and instead of tapping you want to use the two buttons on the touchpad. Am I wrong?

  This can be disabled
  Control Panel-> mouse-> last tab settings of the device (or similar).
  There you have to choose the Synaptics TouchPad settings

  The new window should open, and you could find a lot of different details and parameters.
  You must mark the second option tapping. It s from the point of view of all.
  Here you uncheck the option enable tapping

  That s all ;)

• Re: Accidentally uninstalled Synaptics TouchPad

  Hi, can someone help me please... ?

  I use F104TU for HP on Windows 10 laptop.

  I also accidently uninstall my Synaptic Touchpad. I tried to download the driver from the site Web of Synaptic, but nothing helped.

  Thanks in advance.

  Hi @Mesyong,

  Welcome to the HP Forums! I read your post and wanted to help.

  I understand that you need the driver touchpad for HP Notebook F104TU on Windows 10.

  You can download here:

  Synaptics TouchPad Driver: Version 19.0.12.101 place

  sp72846.exe

  Resources: http://support.hp.com/gb-en/drivers/selfservice/HP-11-f100-Notebook-PC-series/7690607/model/9788115

  Let me know if it solves your problem.

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• HP 15-p097tx: Synaptics TouchPad Driver for Windows 7 64 bit (sp69001 and sp67269) does not work

  Hello

  I just baught HP Pavilian 15-p097tx, which came with Windows 8.1. I like not this OS so I installed windows 7 64-bit Ultimate and after installation of the hp Synaptics TouchPad Driver (sp69001 and sp67269) support, the system Web site goes crazy, I mean windows deselect automatically and when I try to access the touchpad from the Control Panel options the system hangs. Help, please

  Thank you.

  Hi @SushmitMazumdar ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook 15-p097tx and the problems with the driver for the Synaptics TouchPad. If you uninstall the driver and restart the laptop, it will install automatically the best driver.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system.

  I hope this helps.

  Thank you.

• Pavilion dv7 6166-nr: Synaptics TouchPad Enable/Disable light not working after upgrade to Windows 10

  TECHNICAL DATA:

  Name of the operating system Microsoft Windows 10 home
  Version 10.0.10240 Build 10240
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  System name SUZANNES-PC
  System manufacturer Hewlett-Packard
  System model HP Pavilion dv7 Notebook PC
  System Type x 64-based PC
  SKU LW473UA #ABA system
  Processor AMD A4 - 3300M APU with 2 logical processors, 2 Lossnay, 1900 Mhz, graphics HD Radeon (TM)
  Hewlett-Packard Version / Date BIOS F.21, 13/09/2011
  SMBIOS Version 2.7
  Embedded Controller Version 51,24 by action
  BIOS Legacy Mode
  Baseboard manufacturer Hewlett-Packard
  Model baseboard is not available
  Name of plinth base
  Role Mobile platform
  State of secure boot not supported
  PCR7 Configuration binding is not Possible
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "10.0.10240.16392".
  SUZANNES-PC\Suzanne username
  Daylight saving time from the centre of zone
  Physical memory (RAM) installed 4.00 GB
  3.48 GB total physical memory
  2.03 GB available physical memory
  4.79 GB total virtual memory
  3.26 GB available virtual memory
  Page file space 1.31 GB
  Paging file C:\pagefile.sys
  Hyper-V - VM monitor Mode Extensions Yes
  Hyper-V - second level address translation Extensions Yes
  Hyper-V - virtualization enabled in Firmware No.
  Hyper-V - data execution Protection Yes

  NEWS OF SYNAPTICS:

  Material Type Synaptics TouchPad SMBus
  Number buttons 0
  Status OK
  ACPI\SYN1E46\4 PNP device ID & 71B2F2C & 0
  Supported no power management
  Double-click the threshold is not available
  Handedness is not available
  IRQ channel, IRQ 12
  Driver c:\windows\system32\drivers\i8042prt.sys (10.0.10240.16384, 112.00 KB (114 688 bytes), 22:20 09/07/2015)

  PROBLEM:

  The TouchPad works but the light that is usually lit when the touchpad is turned on/off (white/orange) does not work.  I was wondering if there is a way to fix this, or there's someone else with this problem.

  OK, this can be marked RESOLVED.

  I searched and found an older post with the solution by holding down the FN key and pressing the space bar. The fire came as soon as I did it. Go figure!

• TouchPad not turn after update of the synaptics TouchPad driver

  Once I had updated my synaptics touchpad, there no toggle.

  I started to update from this link:

  http://www.Synaptics.com/resources/drivers

  the other features work well.

  my laptop is pavilion g6-1150sx

  Hello

  It seems that the generic Synaptics driver does not support this function if you want that this possibility of return, so you'll need to reinstall the version of HP as follows.

  First, download the installer of the Synaptics driver on the link below and save it in your downloads folder.

  Driver Synaptics - Windows 7.

  Driver Synaptics - Windows 8.

  Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

  When this has completed, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Kind regards

  DP - K